All of lore.kernel.org
 help / color / mirror / Atom feed
From: Aurelien Jarno <aurelien@aurel32.net>
To: linux-kernel@vger.kernel.org, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Paul Walmsley <pjw@kernel.org>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Alexandre Ghiti <alex@ghiti.fr>, Yixun Lan <dlan@kernel.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>,
	devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
	FLATTENED DEVICE TREE BINDINGS),
	linux-riscv@lists.infradead.org (open list:RISC-V ARCHITECTURE),
	spacemit@lists.linux.dev (open list:RISC-V SPACEMIT SoC Support)
Subject: [PATCH 2/5] riscv: dts: spacemit: enable the i2c2 adapter on K3 Pico-ITX board
Date: Sat, 20 Jun 2026 08:22:03 +0200	[thread overview]
Message-ID: <20260620062238.3199108-3-aurelien@aurel32.net> (raw)
In-Reply-To: <20260620062238.3199108-1-aurelien@aurel32.net>

Define I2C2 pinctrl properties, and enable it on the K3 Pico-ITX board.
It will be used by the 24c02 eeprom.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
---
 arch/riscv/boot/dts/spacemit/k3-pico-itx.dts |  6 ++++++
 arch/riscv/boot/dts/spacemit/k3-pinctrl.dtsi | 11 +++++++++++
 2 files changed, 17 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k3-pico-itx.dts b/arch/riscv/boot/dts/spacemit/k3-pico-itx.dts
index 509cebc0c9568..5fe9041ec5702 100644
--- a/arch/riscv/boot/dts/spacemit/k3-pico-itx.dts
+++ b/arch/riscv/boot/dts/spacemit/k3-pico-itx.dts
@@ -43,6 +43,12 @@ reg_aux_vcc5v: regulator-aux-vcc5v {
 	};
 };
 
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_1_cfg>;
+	status = "okay";
+};
+
 &i2c8 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c8_cfg>;
diff --git a/arch/riscv/boot/dts/spacemit/k3-pinctrl.dtsi b/arch/riscv/boot/dts/spacemit/k3-pinctrl.dtsi
index 3ee1471f37985..2017aa14fb424 100644
--- a/arch/riscv/boot/dts/spacemit/k3-pinctrl.dtsi
+++ b/arch/riscv/boot/dts/spacemit/k3-pinctrl.dtsi
@@ -78,6 +78,17 @@ gmac1-phy-0-pins {
 		};
 	};
 
+	/omit-if-no-ref/
+	i2c2_1_cfg: i2c2-1-cfg {
+		i2c2-0-pins {
+			pinmux = <K3_PADCONF(46, 5)>,	/* i2c2 scl */
+				 <K3_PADCONF(47, 5)>;	/* i2c2 sda */
+
+			bias-pull-up= <0>;
+			drive-strength = <25>;
+		};
+	};
+
 	/omit-if-no-ref/
 	i2c8_cfg: i2c8-cfg {
 		i2c8-pins {
-- 
2.53.0


WARNING: multiple messages have this Message-ID (diff)
From: Aurelien Jarno <aurelien@aurel32.net>
To: linux-kernel@vger.kernel.org, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Paul Walmsley <pjw@kernel.org>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Alexandre Ghiti <alex@ghiti.fr>, Yixun Lan <dlan@kernel.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>,
	devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
	FLATTENED DEVICE TREE BINDINGS),
	linux-riscv@lists.infradead.org (open list:RISC-V ARCHITECTURE),
	spacemit@lists.linux.dev (open list:RISC-V SPACEMIT SoC Support)
Subject: [PATCH 2/5] riscv: dts: spacemit: enable the i2c2 adapter on K3 Pico-ITX board
Date: Sat, 20 Jun 2026 08:22:03 +0200	[thread overview]
Message-ID: <20260620062238.3199108-3-aurelien@aurel32.net> (raw)
In-Reply-To: <20260620062238.3199108-1-aurelien@aurel32.net>

Define I2C2 pinctrl properties, and enable it on the K3 Pico-ITX board.
It will be used by the 24c02 eeprom.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
---
 arch/riscv/boot/dts/spacemit/k3-pico-itx.dts |  6 ++++++
 arch/riscv/boot/dts/spacemit/k3-pinctrl.dtsi | 11 +++++++++++
 2 files changed, 17 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k3-pico-itx.dts b/arch/riscv/boot/dts/spacemit/k3-pico-itx.dts
index 509cebc0c9568..5fe9041ec5702 100644
--- a/arch/riscv/boot/dts/spacemit/k3-pico-itx.dts
+++ b/arch/riscv/boot/dts/spacemit/k3-pico-itx.dts
@@ -43,6 +43,12 @@ reg_aux_vcc5v: regulator-aux-vcc5v {
 	};
 };
 
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_1_cfg>;
+	status = "okay";
+};
+
 &i2c8 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c8_cfg>;
diff --git a/arch/riscv/boot/dts/spacemit/k3-pinctrl.dtsi b/arch/riscv/boot/dts/spacemit/k3-pinctrl.dtsi
index 3ee1471f37985..2017aa14fb424 100644
--- a/arch/riscv/boot/dts/spacemit/k3-pinctrl.dtsi
+++ b/arch/riscv/boot/dts/spacemit/k3-pinctrl.dtsi
@@ -78,6 +78,17 @@ gmac1-phy-0-pins {
 		};
 	};
 
+	/omit-if-no-ref/
+	i2c2_1_cfg: i2c2-1-cfg {
+		i2c2-0-pins {
+			pinmux = <K3_PADCONF(46, 5)>,	/* i2c2 scl */
+				 <K3_PADCONF(47, 5)>;	/* i2c2 sda */
+
+			bias-pull-up= <0>;
+			drive-strength = <25>;
+		};
+	};
+
 	/omit-if-no-ref/
 	i2c8_cfg: i2c8-cfg {
 		i2c8-pins {
-- 
2.53.0


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

  parent reply	other threads:[~2026-06-20  6:51 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-20  6:22 [PATCH 0/5] riscv: dts: spacemit: serial/i2c/ethernet improvements for the K3 Pico-ITX board Aurelien Jarno
2026-06-20  6:22 ` Aurelien Jarno
2026-06-20  6:22 ` [PATCH 1/5] riscv: dts: spacemit: set console baud rate on " Aurelien Jarno
2026-06-20  6:22   ` Aurelien Jarno
2026-06-20  9:03   ` Guodong Xu
2026-06-20  9:03     ` Guodong Xu
2026-06-20  6:22 ` Aurelien Jarno [this message]
2026-06-20  6:22   ` [PATCH 2/5] riscv: dts: spacemit: enable the i2c2 adapter " Aurelien Jarno
2026-06-20  6:29   ` sashiko-bot
2026-06-21 13:14     ` Aurelien Jarno
2026-06-21 13:14       ` Aurelien Jarno
2026-06-20  6:22 ` [PATCH 3/5] riscv: dts: spacemit: add 24c02 eeprom " Aurelien Jarno
2026-06-20  6:22   ` Aurelien Jarno
2026-06-20  6:22 ` [PATCH 4/5] riscv: dts: spacemit: add i2c aliases " Aurelien Jarno
2026-06-20  6:22   ` Aurelien Jarno
2026-06-20  6:22 ` [PATCH 5/5] riscv: dts: spacemit: improve RTL8211F PHY configuration " Aurelien Jarno
2026-06-20  6:22   ` Aurelien Jarno

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260620062238.3199108-3-aurelien@aurel32.net \
    --to=aurelien@aurel32.net \
    --cc=alex@ghiti.fr \
    --cc=aou@eecs.berkeley.edu \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dlan@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=pjw@kernel.org \
    --cc=robh@kernel.org \
    --cc=spacemit@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.