CVE-2026-52945: Revert "wireguard: device: enable threaded NAPI"

CVE-2026-52945: Revert "wireguard: device: enable threaded NAPI"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@kernel.org>

Description
===========

In the Linux kernel, the following vulnerability has been resolved:

Revert "wireguard: device: enable threaded NAPI"

This reverts commit 933466fc50a8e4eb167acbd0d8ec96a078462e9c which is
commit db9ae3b6b43c79b1ba87eea849fd65efa05b4b2e upstream.

We have had three independent production user reports in combination
with Cilium utilizing WireGuard as encryption underneath that k8s Pod
E/W traffic to certain peer nodes fully stalled. The situation appears
as follows:

  - Occurs very rarely but at random times under heavy networking load.
  - Once the issue triggers the decryption side stops working completely
    for that WireGuard peer, other peers keep working fine. The stall
    happens also for newly initiated connections towards that particular
    WireGuard peer.
  - Only the decryption side is affected, never the encryption side.
  - Once it triggers, it never recovers and remains in this state,
    the CPU/mem on that node looks normal, no leak, busy loop or crash.
  - bpftrace on the affected system shows that wg_prev_queue_enqueue
    fails, thus the MAX_QUEUED_PACKETS (1024 skbs!) for the peer's
    rx_queue is reached.
  - Also, bpftrace shows that wg_packet_rx_poll for that peer is never
    called again after reaching this state for that peer. For other
    peers wg_packet_rx_poll does get called normally.
  - Commit db9ae3b ("wireguard: device: enable threaded NAPI")
    switched WireGuard to threaded NAPI by default. The default has
    not been changed for triggering the issue, neither did CPU
    hotplugging occur (i.e. 5bd8de2 ("wireguard: queueing: always
    return valid online CPU in wg_cpumask_choose_online()")).
  - The issue has been observed with stable kernels of v5.15 as well as
    v6.1. It was reported to us that v5.10 stable is working fine, and
    no report on v6.6 stable either (somewhat related discussion in [0]
    though).
  - In the WireGuard driver the only material difference between v5.10
    stable and v5.15 stable is the switch to threaded NAPI by default.

    [0] https://lore.kernel.org/netdev/CA+wXwBTT74RErDGAnj98PqS=wvdh8eM1pi4q6tTdExtjnokKqA@mail.gmail.com/

Breakdown of the problem:

  1) skbs arriving for decryption are enqueued to the peer->rx_queue in
     wg_packet_consume_data via wg_queue_enqueue_per_device_and_peer.
  2) The latter only moves the skb into the MPSC peer queue if it does
     not surpass MAX_QUEUED_PACKETS (1024) which is kept track in an
     atomic counter via wg_prev_queue_enqueue.
  3) In case enqueueing was successful, the skb is also queued up
     in the device queue, round-robin picks a next online CPU, and
     schedules the decryption worker.
  4) The wg_packet_decrypt_worker, once scheduled, picks these up
     from the queue, decrypts the packets and once done calls into
     wg_queue_enqueue_per_peer_rx.
  5) The latter updates the state to PACKET_STATE_CRYPTED on success
     and calls napi_schedule on the per peer->napi instance.
  6) NAPI then polls via wg_packet_rx_poll. wg_prev_queue_peek checks
     on the peer->rx_queue. It will wg_prev_queue_dequeue if the
     queue->peeked skb was not cached yet, or just return the latter
     otherwise. (wg_prev_queue_drop_peeked later clears the cache.)
  7) From an ordering perspective, the peer->rx_queue has skbs in order
     while the device queue with the per-CPU worker threads from a
     global ordering PoV can finish the decryption and signal the skb
     PACKET_STATE_CRYPTED out of order.
  8) A situation can be observed that the first packet coming in will
     be stuck waiting for the decryption worker to be scheduled for
     a longer time when the system is under pressure.
  9) While this is the case, the other CPUs in the meantime finish
     decryption and call into napi_schedule.
 10) Now in wg_packet_rx_poll it picks up the first in-order skb
     from the peer->rx_queue and sees that its state is still
     PACKET_STATE_UNCRYPTED. The NAPI poll routine then exits early
     with work_done = 0 and calls napi_complete_done, signalling
     it "finished" processing.
 11) The assumption in wg_packet_decrypt_worker is that when the
     decryption finished the subsequent napi_schedule will always
     lead to a later invocation of wg_packet_rx_poll to pick up
     the finished packet.
 12) However, it appears that a later napi_schedule does /not/
     schedule a later poll and thus no wg_packet_rx_poll.
 13) If this situation happens exactly for the corner case where
     the decryption worker of the first packet is stuck and waiting
     to be scheduled, and the network load for WireGuard is very
     high then the queue can build up to MAX_QUEUED_PACKETS.
 14) If this situation occurs, then no new decryption worker will
     be scheduled and also no new napi_schedule to make forward
     progress.
 15) This means the peer->rx_queue stops processing packets completely
     and they are indefinitely stuck waiting for a new NAPI poll on
     that peer which never happens. New packets for that peer are
     then dropped due to full queue, as it has been observed on the
     production machines.

Technically, the backport of commit db9ae3b6b43c ("wireguard: device:
enable threaded NAPI") to stable should not have happened since it is
more of an optimization rather than a pure fix and addresses a NAPI
situation with utilizing many WireGuard tunnel devices in parallel.
Revert it from stable given the backport triggers a regression for
mentioned kernels.

The Linux kernel CVE team has assigned CVE-2026-52945 to this issue.


Affected and fixed versions
===========================

	Issue introduced in 6.12.34 with commit 933466fc50a8e4eb167acbd0d8ec96a078462e9c and fixed in 6.12.74 with commit e94b369ff82f9bc84f090f271bd78f41c9f6ab2f

Please see https://www.kernel.org for a full list of currently supported
kernel versions by the kernel community.

Unaffected versions might change over time as fixes are backported to
older supported kernel versions.  The official CVE entry at
	https://cve.org/CVERecord/?id=CVE-2026-52945
will be updated if fixes are backported, please check that for the most
up to date information about this issue.


Affected files
==============

The file(s) affected by this issue are:
	drivers/net/wireguard/device.c


Mitigation
==========

The Linux kernel CVE team recommends that you update to the latest
stable kernel version for this, and many other bugfixes.  Individual
changes are never tested alone, but rather are part of a larger kernel
release.  Cherry-picking individual commits is not recommended or
supported by the Linux kernel community at all.  If however, updating to
the latest release is impossible, the individual changes to resolve this
issue can be found at these commits:
	https://git.kernel.org/stable/c/e94b369ff82f9bc84f090f271bd78f41c9f6ab2f