[PATCH 7.1 16/21] serial: qcom_geni: Fix RX DMA stall when SE_DMA_RX_LEN_IN is zero

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

7.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>

commit b93062b6d8a1b2d9bad235cac25558a909819026 upstream.

In qcom_geni_serial_handle_rx_dma(), geni_se_rx_dma_unprep() clears
port->rx_dma_addr before SE_DMA_RX_LEN_IN is read. If the register is zero,
for example when the RX stale counter fires on an idle line, the handler
returns without calling geni_se_rx_dma_prep().

The next RX DMA interrupt then hits the !port->rx_dma_addr guard and
returns immediately, so the RX DMA buffer is never rearmed and later input
is lost.

Keep the handler on the rearm path when rx_in is zero. Warn about the
unexpected zero-length DMA completion, skip received-data handling, and
always call geni_se_rx_dma_prep().

Fixes: 2aaa43c70778 ("tty: serial: qcom-geni-serial: add support for serial engine DMA")
Cc: stable@vger.kernel.org
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Link: https://patch.msgid.link/20260528-serial-rx-0-byte-fix-v2-1-b4195cfe342f@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/qcom_geni_serial.c |    9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -905,12 +905,9 @@ static void qcom_geni_serial_handle_rx_d
 	port->rx_dma_addr = 0;
 
 	rx_in = readl(uport->membase + SE_DMA_RX_LEN_IN);
-	if (!rx_in) {
-		dev_warn(uport->dev, "serial engine reports 0 RX bytes in!\n");
-		return;
-	}
-
-	if (!drop)
+	if (!rx_in)
+		dev_warn_ratelimited(uport->dev, "serial engine reports 0 RX bytes in!\n");
+	else if (!drop)
 		handle_rx_uart(uport, rx_in);
 
 	ret = geni_se_rx_dma_prep(&port->se, port->rx_buf,