From: Eric Chung <eric.chung@riscstar.com>
To: u-boot-spacemit@groups.io, u-boot@lists.denx.de
Cc: Tom Rini <trini@konsulko.com>, Peng Fan <peng.fan@nxp.com>,
Huan Zhou <pericycle.cc@gmail.com>,
Raymond Mao <raymond.mao@riscstar.com>,
Jaehoon Chung <jh80.chung@samsung.com>,
Bhimeswararao Matsa <bhimeswararao.matsa@gmail.com>,
Tanmay Kathpalia <tanmay.kathpalia@altera.com>,
Kaustabh Chakraborty <kauschluss@disroot.org>,
Han Xu <han.xu@nxp.com>, Yanir Levin <yanir.levin@tandemg.com>,
Christoph Stoidner <c.stoidner@phytec.de>,
Balsundar Ponnusamy <balsundar.ponnusamy@altera.com>,
Daniel Palmer <daniel@thingy.jp>, Anshul Dalal <anshuld@ti.com>,
Bastien Curutchet <bastien.curutchet@bootlin.com>,
Angelo Dureghello <angelo@kernel-space.org>,
Johan Jonker <jbx6244@gmail.com>, Rick Chen <rick@andestech.com>,
Leo <ycliang@andestech.com>,
Sam Protsenko <semen.protsenko@linaro.org>,
Guodong Xu <guodong.xu@riscstar.com>,
Eric Chung <eric.chung@riscstar.com>
Subject: [PATCH v2 0/8] spacemit mmc driver
Date: Mon, 29 Jun 2026 23:51:14 +0800 [thread overview]
Message-ID: <20260629-m4-v2-0-cbc91c6b83d8@riscstar.com> (raw)
This series adds MMC support for the SpacemiT K1: an SDHCI platform
driver, the SD card device-tree overlay, defconfig options, and SPL
boot-device selection from the SoC strap/config registers. The SDHCI
driver is usable in both SPL and U-Boot proper.
A flashing guide (doc/board/spacemit/k1-flash.rst) describes how to
write images to eMMC.
This series sits on top of three series still under review, and must be
applied after them, in this order:
1. K1 clock/reset/dts migration [1] (8 patches)
2. K1 SPL bring-up v4 [2] (14 patches)
3. K1 pinctrl/GPIO and SPI NOR v2 [3] (9 patches)
Then this series (8 patches)
For each series:
b4 am <cover-msgid>
git am ./*.mbx
Link: https://lore.kernel.org/u-boot/20260526-b4-k1-clk-reset-upstream-dts-v2-0-af815e362b0c@riscstar.com/ [1]
Link: https://lore.kernel.org/u-boot/20260519-b4-k1-spl-bring-up-v4-0-3915a2a904c1@riscstar.com/ [2]
Link: https://lore.kernel.org/u-boot/20260520-b4-k1-spl-pinctrl-spinor-v2-0-8d25db98ac8e@riscstar.com/ [3]
---
Changes in v2:
- EDITME: describe what is new in this series revision.
- EDITME: use bulletpoints and terse descriptions.
- Link to v1: https://patch.msgid.link/20260629-m4-v1-0-a11f8d496e62@riscstar.com
Changes in v2:
- cmd: drop patches on eminfo & tlv_eeprom.
- configs: Enable ADMA and SYSCON support.
- dts: Use vmmc-supply as vqmmc-supply on the SD card node.
- mmc: k1: Enable ADMA mode support, use CMD23 for multi-block
read/write, correct pinctrl state from "fast" to "uhs".
- mmc: sdhci: Add new quirk patch to enable CMD23 for multi-block
transfers.
- pinctrl: k1: Add new IO power domain configuration support for
dual-voltage GPIO banks.
- spacemit: k1: Use FIELD_GET() to parse boot strap mode.
- Link to v1: https://lore.kernel.org/u-boot/20260521-k1-spl-mmc-sdcard-v1-0-1bd14b8c4f9f@riscstar.com/
To: u-boot-spacemit@groups.io
To: u-boot@lists.denx.de
Cc: Huan Zhou <pericycle.cc@gmail.com>
Cc: Guodong Xu <guodong.xu@riscstar.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Raymond Mao <raymond.mao@riscstar.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Bhimeswararao Matsa <bhimeswararao.matsa@gmail.com>
Cc: Tanmay Kathpalia <tanmay.kathpalia@altera.com>
Cc: Kaustabh Chakraborty <kauschluss@disroot.org>
Cc: Han Xu <han.xu@nxp.com>
Cc: Yanir Levin <yanir.levin@tandemg.com>
Cc: Christoph Stoidner <c.stoidner@phytec.de>
Cc: Balsundar Ponnusamy <balsundar.ponnusamy@altera.com>
Cc: Daniel Palmer <daniel@thingy.jp>
Cc: Anshul Dalal <anshuld@ti.com>
Cc: Bastien Curutchet <bastien.curutchet@bootlin.com>
Cc: Angelo Dureghello <angelo@kernel-space.org>
Cc: Johan Jonker <jbx6244@gmail.com>
Cc: Rick Chen <rick@andestech.com>
Cc: Leo <ycliang@andestech.com>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Eric Chung <eric.chung@riscstar.com>
---
Eric Chung (8):
pinctrl: k1: add IO power domain configuration support
mmc: sdhci: add quirk to enable CMD23 for multi-block transfers
mmc: k1: add sdhci platform driver
dts: k1: add SD card support in u-boot overlay
configs: k1: enable SD and eMMC support
doc: spacemit: flash on K1 SoC based boards
config: k1: enable ENV support for eMMC
spacemit: k1: load product name from environment variable
arch/riscv/dts/k1-bananapi-f3-u-boot.dtsi | 87 +++-
arch/riscv/dts/k1-musepi-pro-u-boot.dtsi | 82 +++-
board/spacemit/k1/MAINTAINERS | 3 +-
board/spacemit/k1/spl.c | 50 +--
configs/spacemit_k1_defconfig | 26 +-
doc/board/spacemit/index.rst | 1 +
doc/board/spacemit/k1-flash.rst | 157 +++++++
drivers/mmc/Kconfig | 7 +
drivers/mmc/Makefile | 1 +
drivers/mmc/mmc.c | 22 +-
drivers/mmc/sdhci.c | 3 +
drivers/mmc/spacemit_sdhci.c | 681 ++++++++++++++++++++++++++++++
drivers/pinctrl/spacemit/pinctrl-k1.c | 84 +++-
include/mmc.h | 5 +-
include/sdhci.h | 1 +
15 files changed, 1157 insertions(+), 53 deletions(-)
---
base-commit: e7a6b33b153be98fcca16729e189f90c2d91a98c
change-id: 20260629-m4-98e01659fefb
Best regards,
--
Eric Chung <eric.chung@riscstar.com>
next reply other threads:[~2026-06-29 15:51 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-29 15:51 Eric Chung [this message]
2026-06-29 15:51 ` [PATCH v2 v2 1/8] pinctrl: k1: add IO power domain configuration support Eric Chung
2026-06-30 8:55 ` Yao Zi
2026-06-29 15:51 ` [PATCH v2 v2 2/8] mmc: sdhci: add quirk to enable CMD23 for multi-block transfers Eric Chung
2026-06-30 2:47 ` Peng Fan
2026-06-29 15:51 ` [PATCH v2 v2 3/8] mmc: k1: add sdhci platform driver Eric Chung
2026-06-30 2:52 ` Peng Fan
2026-06-29 15:51 ` [PATCH v2 v2 4/8] dts: k1: add SD card support in u-boot overlay Eric Chung
2026-06-30 2:56 ` Peng Fan
2026-06-29 15:51 ` [PATCH v2 v2 5/8] configs: k1: enable SD and eMMC support Eric Chung
2026-06-29 15:51 ` [PATCH v2 v2 6/8] doc: spacemit: flash on K1 SoC based boards Eric Chung
2026-06-29 15:51 ` [PATCH v2 v2 7/8] config: k1: enable ENV support for eMMC Eric Chung
2026-06-29 15:51 ` [PATCH v2 v2 8/8] spacemit: k1: load product name from environment variable Eric Chung
2026-06-30 2:55 ` Peng Fan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260629-m4-v2-0-cbc91c6b83d8@riscstar.com \
--to=eric.chung@riscstar.com \
--cc=angelo@kernel-space.org \
--cc=anshuld@ti.com \
--cc=balsundar.ponnusamy@altera.com \
--cc=bastien.curutchet@bootlin.com \
--cc=bhimeswararao.matsa@gmail.com \
--cc=c.stoidner@phytec.de \
--cc=daniel@thingy.jp \
--cc=guodong.xu@riscstar.com \
--cc=han.xu@nxp.com \
--cc=jbx6244@gmail.com \
--cc=jh80.chung@samsung.com \
--cc=kauschluss@disroot.org \
--cc=peng.fan@nxp.com \
--cc=pericycle.cc@gmail.com \
--cc=raymond.mao@riscstar.com \
--cc=rick@andestech.com \
--cc=semen.protsenko@linaro.org \
--cc=tanmay.kathpalia@altera.com \
--cc=trini@konsulko.com \
--cc=u-boot-spacemit@groups.io \
--cc=u-boot@lists.denx.de \
--cc=yanir.levin@tandemg.com \
--cc=ycliang@andestech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.