* [PATCH v1 0/2] Add Lenovo ThinkEdge SE70 carrier board support
@ 2026-06-29 11:11 Jiqi Li
2026-06-29 11:11 ` [PATCH 1/2] dt-bindings: arm: tegra: Add lenovo,thinkedge-se70 compatible string Jiqi Li
2026-06-29 11:11 ` [PATCH 2/2] arm64: tegra: Add Lenovo ThinkEdge SE70 device tree Jiqi Li
0 siblings, 2 replies; 8+ messages in thread
From: Jiqi Li @ 2026-06-29 11:11 UTC (permalink / raw)
To: linux-tegra
Cc: devicetree, robh+dt, krzk+dt, conor+dt, jonathanh, thierry.reding,
mpearson-lenovo, Jiqi Li
This patch set introduces device tree binding and standalone DTS file
for Lenovo ThinkEdge SE70, a fanless industrial edge gateway powered by
the NVIDIA Jetson Xavier NX module (P3668-0001) on a custom carrier board.
Patch 1 updates tegra.yaml bindings to add the three-stage compatible
string matching board + SOM + SoC, following the existing Tegra
carrier board convention.
Patch 2 adds the complete carrier board device tree, including:
- 40-pin expansion header pinmux configuration
- External Micro SD card slot with dedicated 3.3V regulator
- I2C bus for 40-pin header
All static device tree checks pass: dtbs compile and dt_binding_check
complete without errors.
Jiqi Li (2):
dt-bindings: arm: tegra: Add lenovo,thinkedge-se70 compatible string
arm64: tegra: Add Lenovo ThinkEdge SE70 device tree
.../devicetree/bindings/arm/tegra.yaml | 5 +
arch/arm64/boot/dts/nvidia/Makefile | 1 +
...ra194-lenovo-thinkedge-se70-baseboard.dtsi | 106 ++++++++++++++++++
.../nvidia/tegra194-lenovo-thinkedge-se70.dts | 14 +++
4 files changed, 126 insertions(+)
create mode 100644 arch/arm64/boot/dts/nvidia/tegra194-lenovo-thinkedge-se70-baseboard.dtsi
create mode 100644 arch/arm64/boot/dts/nvidia/tegra194-lenovo-thinkedge-se70.dts
--
2.43.0
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 1/2] dt-bindings: arm: tegra: Add lenovo,thinkedge-se70 compatible string
2026-06-29 11:11 [PATCH v1 0/2] Add Lenovo ThinkEdge SE70 carrier board support Jiqi Li
@ 2026-06-29 11:11 ` Jiqi Li
2026-06-29 15:17 ` Conor Dooley
2026-06-29 11:11 ` [PATCH 2/2] arm64: tegra: Add Lenovo ThinkEdge SE70 device tree Jiqi Li
1 sibling, 1 reply; 8+ messages in thread
From: Jiqi Li @ 2026-06-29 11:11 UTC (permalink / raw)
To: linux-tegra
Cc: devicetree, robh+dt, krzk+dt, conor+dt, jonathanh, thierry.reding,
mpearson-lenovo, Jiqi Li
Lenovo ThinkEdge SE70 is a fanless industrial edge gateway carrier
board based on NVIDIA Tegra194 (Xavier NX) SOM.
Add the corresponding compatible string for device tree validation.
Signed-off-by: Jiqi Li <lijq9@lenovo.com>
---
Documentation/devicetree/bindings/arm/tegra.yaml | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/tegra.yaml b/Documentation/devicetree/bindings/arm/tegra.yaml
index 033a63f6c068..a54d0024e636 100644
--- a/Documentation/devicetree/bindings/arm/tegra.yaml
+++ b/Documentation/devicetree/bindings/arm/tegra.yaml
@@ -268,6 +268,11 @@ properties:
items:
- const: nvidia,p3509-0000+p3668-0001
- const: nvidia,tegra194
+ - description: Lenovo ThinkEdge SE70
+ items:
+ - const: lenovo,thinkedge-se70
+ - const: nvidia,p3668-0001
+ - const: nvidia,tegra194
- items:
- const: nvidia,tegra234-vdk
- const: nvidia,tegra234
--
2.43.0
^ permalink raw reply related [flat|nested] 8+ messages in thread* Re: [PATCH 1/2] dt-bindings: arm: tegra: Add lenovo,thinkedge-se70 compatible string
2026-06-29 11:11 ` [PATCH 1/2] dt-bindings: arm: tegra: Add lenovo,thinkedge-se70 compatible string Jiqi Li
@ 2026-06-29 15:17 ` Conor Dooley
0 siblings, 0 replies; 8+ messages in thread
From: Conor Dooley @ 2026-06-29 15:17 UTC (permalink / raw)
To: Jiqi Li
Cc: linux-tegra, devicetree, robh+dt, krzk+dt, conor+dt, jonathanh,
thierry.reding, mpearson-lenovo
[-- Attachment #1: Type: text/plain, Size: 75 bytes --]
Acked-by: Conor Dooley <conor.dooley@microchip.com>
pw-bot: not-applicable
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 2/2] arm64: tegra: Add Lenovo ThinkEdge SE70 device tree
2026-06-29 11:11 [PATCH v1 0/2] Add Lenovo ThinkEdge SE70 carrier board support Jiqi Li
2026-06-29 11:11 ` [PATCH 1/2] dt-bindings: arm: tegra: Add lenovo,thinkedge-se70 compatible string Jiqi Li
@ 2026-06-29 11:11 ` Jiqi Li
2026-06-29 11:23 ` sashiko-bot
1 sibling, 1 reply; 8+ messages in thread
From: Jiqi Li @ 2026-06-29 11:11 UTC (permalink / raw)
To: linux-tegra
Cc: devicetree, robh+dt, krzk+dt, conor+dt, jonathanh, thierry.reding,
mpearson-lenovo, Jiqi Li
Add initial device tree support for the Lenovo ThinkEdge SE70, an
industrial edge gateway based on the NVIDIA Jetson Xavier NX module
(P3668-0001) with a custom carrier board.
This initial submission includes:
- 40-pin expansion header pinmux configuration
- External Micro SD card slot with dedicated 3.3V regulator
- I2C bus for 40-pin header
Static verification passed: dt_binding_check and dtbs compilation
complete without errors.
Signed-off-by: Jiqi Li <lijq9@lenovo.com>
---
arch/arm64/boot/dts/nvidia/Makefile | 1 +
...ra194-lenovo-thinkedge-se70-baseboard.dtsi | 106 ++++++++++++++++++
.../nvidia/tegra194-lenovo-thinkedge-se70.dts | 14 +++
3 files changed, 121 insertions(+)
create mode 100644 arch/arm64/boot/dts/nvidia/tegra194-lenovo-thinkedge-se70-baseboard.dtsi
create mode 100644 arch/arm64/boot/dts/nvidia/tegra194-lenovo-thinkedge-se70.dts
diff --git a/arch/arm64/boot/dts/nvidia/Makefile b/arch/arm64/boot/dts/nvidia/Makefile
index 72c0cb5efa47..736a3f8a923f 100644
--- a/arch/arm64/boot/dts/nvidia/Makefile
+++ b/arch/arm64/boot/dts/nvidia/Makefile
@@ -29,6 +29,7 @@ dtb-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186-p3509-0000+p3636-0001.dtb
dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p2972-0000.dtb
dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0000.dtb
dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0001.dtb
+dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-lenovo-thinkedge-se70.dtb
dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-sim-vdk.dtb
dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3737-0000+p3701-0000.dtb
dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3737-0000+p3701-0008.dtb
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-lenovo-thinkedge-se70-baseboard.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-lenovo-thinkedge-se70-baseboard.dtsi
new file mode 100644
index 000000000000..b88388d15229
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra194-lenovo-thinkedge-se70-baseboard.dtsi
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/gpio/tegra194-gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+/ {
+ vdd_5v0_sys: regulator-vdd-5v0-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_5V_SYS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* Fixed 3.3V power supply regulator for external Micro SD slot */
+ vdd_3v3_sd: regulator-sd-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_3V3_SD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio TEGRA194_MAIN_GPIO(Q, 5) GPIO_ACTIVE_HIGH>;
+ regulator-boot-on;
+ enable-active-high;
+ };
+
+ bus@0 {
+ /* 40-pin expansion header custom pinmux configuration */
+ pinmux@2430000 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinmux_hdr40>;
+
+ pinmux_hdr40: pinmux-hdr40 {
+ pin7 {
+ nvidia,pins = "aud_mclk_ps4";
+ nvidia,function = "aud";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pin11 {
+ nvidia,pins = "uart1_rts_pr4";
+ nvidia,function = "uarta";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pin12 {
+ nvidia,pins = "dap5_sclk_pt5";
+ nvidia,function = "i2s5";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pin35 {
+ nvidia,pins = "dap5_fs_pu0";
+ nvidia,function = "i2s5";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pin36 {
+ nvidia,pins = "uart1_cts_pr5";
+ nvidia,function = "uarta";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pin38 {
+ nvidia,pins = "dap5_din_pt7";
+ nvidia,function = "i2s5";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pin40 {
+ nvidia,pins = "dap5_dout_pt6";
+ nvidia,function = "i2s5";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ };
+ };
+
+ /* Configure i2c bus clock to 400kHz for carrier board peripherals */
+ i2c@3160000 {
+ clock-frequency = <400000>;
+ status = "okay";
+ };
+
+
+ /* SDMMC3: External Micro SD card slot */
+ mmc@3440000 {
+ bus-width = <4>;
+ cd-gpios = <&gpio_aon TEGRA194_AON_GPIO(CC, 4) GPIO_ACTIVE_LOW>;
+ disable-wp;
+ no-1-8-v;
+ vmmc-supply = <&vdd_3v3_sd>;
+ status = "okay";
+ };
+
+ };
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-lenovo-thinkedge-se70.dts b/arch/arm64/boot/dts/nvidia/tegra194-lenovo-thinkedge-se70.dts
new file mode 100644
index 000000000000..a8de685f05ef
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra194-lenovo-thinkedge-se70.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra194-p3668-0001.dtsi"
+#include "tegra194-lenovo-thinkedge-se70-baseboard.dtsi"
+
+/ {
+ model = "Lenovo ThinkEdge SE70";
+ compatible = "lenovo,thinkedge-se70", "nvidia,p3668-0001", "nvidia,tegra194";
+
+ chosen {
+ bootargs = "console=ttyTCU0,115200";
+ };
+};
--
2.43.0
^ permalink raw reply related [flat|nested] 8+ messages in thread* Re: [PATCH 2/2] arm64: tegra: Add Lenovo ThinkEdge SE70 device tree
2026-06-29 11:11 ` [PATCH 2/2] arm64: tegra: Add Lenovo ThinkEdge SE70 device tree Jiqi Li
@ 2026-06-29 11:23 ` sashiko-bot
0 siblings, 0 replies; 8+ messages in thread
From: sashiko-bot @ 2026-06-29 11:23 UTC (permalink / raw)
To: Jiqi Li; +Cc: devicetree, robh, conor+dt
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Low] Unused input/event-code headers are included in the baseboard devicetree.
--
commit 177543cf6f6216384a5f49bfe40283ab1224a5a2
Author: Jiqi Li <lijq9@lenovo.com>
arm64: tegra: Add Lenovo ThinkEdge SE70 device tree
This commit adds initial device tree support for the Lenovo ThinkEdge SE70,
an industrial edge gateway based on the NVIDIA Jetson Xavier NX module. The
submission includes the 40-pin expansion header pinmux configuration, external
Micro SD card slot, and I2C bus for the 40-pin header.
> diff --git a/arch/arm64/boot/dts/nvidia/tegra194-lenovo-thinkedge-se70-baseboard.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-lenovo-thinkedge-se70-baseboard.dtsi
> new file mode 100644
> index 0000000000000..b88388d152293
> --- /dev/null
> +++ b/arch/arm64/boot/dts/nvidia/tegra194-lenovo-thinkedge-se70-baseboard.dtsi
> @@ -0,0 +1,106 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +#include <dt-bindings/gpio/tegra194-gpio.h>
> +#include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/input/gpio-keys.h>
[Severity: Low]
Are these two input-related headers needed? There do not appear to be any
gpio-keys nodes or KEY_* event codes utilized anywhere in this file.
[ ... ]
--
Sashiko AI review · https://sashiko.dev/#/patchset/20260629111104.645771-1-lijq9@lenovo.com?part=2
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v2 0/2] Add Lenovo ThinkEdge SE70 carrier board support
@ 2026-06-30 9:17 Jiqi Li
2026-06-30 9:17 ` [PATCH 2/2] arm64: tegra: Add Lenovo ThinkEdge SE70 device tree Jiqi Li
0 siblings, 1 reply; 8+ messages in thread
From: Jiqi Li @ 2026-06-30 9:17 UTC (permalink / raw)
To: linux-tegra
Cc: devicetree, robh+dt, krzk+dt, conor+dt, mperttunen, jonathanh,
thierry.reding, mpearson-lenovo, Jiqi Li
This patch set introduces device tree binding and standalone DTS file
for Lenovo ThinkEdge SE70, a fanless industrial edge gateway powered by
the NVIDIA Jetson Xavier NX module (P3668-0001) on a custom carrier board.
Patch 1 updates tegra.yaml bindings to add the three-stage compatible
string matching board + SOM + SoC, following the existing Tegra
carrier board convention.
Patch 2 adds the complete carrier board device tree, including:
- 40-pin expansion header pinmux configuration
- External Micro SD card slot with dedicated 3.3V regulator
- I2C bus for 40-pin header
All static device tree checks pass: dtbs compile and dt_binding_check
complete without errors.
Jiqi Li (2):
dt-bindings: arm: tegra: Add lenovo,thinkedge-se70 compatible string
arm64: tegra: Add Lenovo ThinkEdge SE70 device tree
.../devicetree/bindings/arm/tegra.yaml | 5 +
arch/arm64/boot/dts/nvidia/Makefile | 1 +
...ra194-lenovo-thinkedge-se70-baseboard.dtsi | 103 ++++++++++++++++++
.../nvidia/tegra194-lenovo-thinkedge-se70.dts | 14 +++
4 files changed, 123 insertions(+)
create mode 100644 arch/arm64/boot/dts/nvidia/tegra194-lenovo-thinkedge-se70-baseboard.dtsi
create mode 100644 arch/arm64/boot/dts/nvidia/tegra194-lenovo-thinkedge-se70.dts
--
2.43.0
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 2/2] arm64: tegra: Add Lenovo ThinkEdge SE70 device tree
2026-06-30 9:17 [PATCH v2 0/2] Add Lenovo ThinkEdge SE70 carrier board support Jiqi Li
@ 2026-06-30 9:17 ` Jiqi Li
2026-06-30 10:02 ` Krzysztof Kozlowski
0 siblings, 1 reply; 8+ messages in thread
From: Jiqi Li @ 2026-06-30 9:17 UTC (permalink / raw)
To: linux-tegra
Cc: devicetree, robh+dt, krzk+dt, conor+dt, mperttunen, jonathanh,
thierry.reding, mpearson-lenovo, Jiqi Li
Add initial device tree support for the Lenovo ThinkEdge SE70, an
industrial edge gateway based on the NVIDIA Jetson Xavier NX module
(P3668-0001) with a custom carrier board.
This initial submission includes:
- 40-pin expansion header pinmux configuration
- External Micro SD card slot with dedicated 3.3V regulator
- I2C bus for 40-pin header
Static verification passed: dt_binding_check and dtbs compilation
complete without errors.
Signed-off-by: Jiqi Li <lijq9@lenovo.com>
---
Changes in v2:
- Remove unused input-related headers from baseboard DTSI
---
arch/arm64/boot/dts/nvidia/Makefile | 1 +
...ra194-lenovo-thinkedge-se70-baseboard.dtsi | 103 ++++++++++++++++++
.../nvidia/tegra194-lenovo-thinkedge-se70.dts | 14 +++
3 files changed, 118 insertions(+)
create mode 100644 arch/arm64/boot/dts/nvidia/tegra194-lenovo-thinkedge-se70-baseboard.dtsi
create mode 100644 arch/arm64/boot/dts/nvidia/tegra194-lenovo-thinkedge-se70.dts
diff --git a/arch/arm64/boot/dts/nvidia/Makefile b/arch/arm64/boot/dts/nvidia/Makefile
index 72c0cb5efa47..736a3f8a923f 100644
--- a/arch/arm64/boot/dts/nvidia/Makefile
+++ b/arch/arm64/boot/dts/nvidia/Makefile
@@ -29,6 +29,7 @@ dtb-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186-p3509-0000+p3636-0001.dtb
dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p2972-0000.dtb
dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0000.dtb
dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0001.dtb
+dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-lenovo-thinkedge-se70.dtb
dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-sim-vdk.dtb
dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3737-0000+p3701-0000.dtb
dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3737-0000+p3701-0008.dtb
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-lenovo-thinkedge-se70-baseboard.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-lenovo-thinkedge-se70-baseboard.dtsi
new file mode 100644
index 000000000000..d0f33384c1f8
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra194-lenovo-thinkedge-se70-baseboard.dtsi
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/gpio/tegra194-gpio.h>
+
+/ {
+ vdd_5v0_sys: regulator-vdd-5v0-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_5V_SYS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* Fixed 3.3V power supply regulator for external Micro SD slot */
+ vdd_3v3_sd: regulator-sd-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_3V3_SD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio TEGRA194_MAIN_GPIO(Q, 5) GPIO_ACTIVE_HIGH>;
+ regulator-boot-on;
+ enable-active-high;
+ };
+
+ bus@0 {
+ /* 40-pin expansion header custom pinmux configuration */
+ pinmux@2430000 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinmux_hdr40>;
+
+ pinmux_hdr40: pinmux-hdr40 {
+ pin7 {
+ nvidia,pins = "aud_mclk_ps4";
+ nvidia,function = "aud";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pin11 {
+ nvidia,pins = "uart1_rts_pr4";
+ nvidia,function = "uarta";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pin12 {
+ nvidia,pins = "dap5_sclk_pt5";
+ nvidia,function = "i2s5";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pin35 {
+ nvidia,pins = "dap5_fs_pu0";
+ nvidia,function = "i2s5";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pin36 {
+ nvidia,pins = "uart1_cts_pr5";
+ nvidia,function = "uarta";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pin38 {
+ nvidia,pins = "dap5_din_pt7";
+ nvidia,function = "i2s5";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pin40 {
+ nvidia,pins = "dap5_dout_pt6";
+ nvidia,function = "i2s5";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ };
+ };
+
+ /* Configure i2c bus clock to 400kHz for carrier board peripherals */
+ i2c@3160000 {
+ clock-frequency = <400000>;
+ status = "okay";
+ };
+
+ /* SDMMC3: External Micro SD card slot */
+ mmc@3440000 {
+ bus-width = <4>;
+ cd-gpios = <&gpio_aon TEGRA194_AON_GPIO(CC, 4) GPIO_ACTIVE_LOW>;
+ disable-wp;
+ no-1-8-v;
+ vmmc-supply = <&vdd_3v3_sd>;
+ status = "okay";
+ };
+
+ };
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-lenovo-thinkedge-se70.dts b/arch/arm64/boot/dts/nvidia/tegra194-lenovo-thinkedge-se70.dts
new file mode 100644
index 000000000000..a8de685f05ef
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra194-lenovo-thinkedge-se70.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra194-p3668-0001.dtsi"
+#include "tegra194-lenovo-thinkedge-se70-baseboard.dtsi"
+
+/ {
+ model = "Lenovo ThinkEdge SE70";
+ compatible = "lenovo,thinkedge-se70", "nvidia,p3668-0001", "nvidia,tegra194";
+
+ chosen {
+ bootargs = "console=ttyTCU0,115200";
+ };
+};
--
2.43.0
^ permalink raw reply related [flat|nested] 8+ messages in thread* Re: [PATCH 2/2] arm64: tegra: Add Lenovo ThinkEdge SE70 device tree
2026-06-30 9:17 ` [PATCH 2/2] arm64: tegra: Add Lenovo ThinkEdge SE70 device tree Jiqi Li
@ 2026-06-30 10:02 ` Krzysztof Kozlowski
0 siblings, 0 replies; 8+ messages in thread
From: Krzysztof Kozlowski @ 2026-06-30 10:02 UTC (permalink / raw)
To: Jiqi Li, linux-tegra
Cc: devicetree, robh+dt, krzk+dt, conor+dt, mperttunen, jonathanh,
thierry.reding, mpearson-lenovo
On 30/06/2026 11:17, Jiqi Li wrote:
> Add initial device tree support for the Lenovo ThinkEdge SE70, an
> industrial edge gateway based on the NVIDIA Jetson Xavier NX module
> (P3668-0001) with a custom carrier board.
>
> This initial submission includes:
> - 40-pin expansion header pinmux configuration
> - External Micro SD card slot with dedicated 3.3V regulator
> - I2C bus for 40-pin header
>
> Static verification passed: dt_binding_check and dtbs compilation
> complete without errors.
>
> Signed-off-by: Jiqi Li <lijq9@lenovo.com>
> ---
> Changes in v2:
> - Remove unused input-related headers from baseboard DTSI
> ---
> arch/arm64/boot/dts/nvidia/Makefile | 1 +
> ...ra194-lenovo-thinkedge-se70-baseboard.dtsi | 103 ++++++++++++++++++
> .../nvidia/tegra194-lenovo-thinkedge-se70.dts | 14 +++
> 3 files changed, 118 insertions(+)
> create mode 100644 arch/arm64/boot/dts/nvidia/tegra194-lenovo-thinkedge-se70-baseboard.dtsi
What is the "baseboard"? You do not have compatible for SoM, so se70
feels like final baseboard. Also commit msg says that se70 is the final
carrier board, so a DTSI for non-existing hardware feels confusing.
...
> +};
> diff --git a/arch/arm64/boot/dts/nvidia/tegra194-lenovo-thinkedge-se70.dts b/arch/arm64/boot/dts/nvidia/tegra194-lenovo-thinkedge-se70.dts
> new file mode 100644
> index 000000000000..a8de685f05ef
> --- /dev/null
> +++ b/arch/arm64/boot/dts/nvidia/tegra194-lenovo-thinkedge-se70.dts
> @@ -0,0 +1,14 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/dts-v1/;
> +
> +#include "tegra194-p3668-0001.dtsi"
> +#include "tegra194-lenovo-thinkedge-se70-baseboard.dtsi"
> +
> +/ {
> + model = "Lenovo ThinkEdge SE70";
> + compatible = "lenovo,thinkedge-se70", "nvidia,p3668-0001", "nvidia,tegra194";
> +
> + chosen {
> + bootargs = "console=ttyTCU0,115200";
Why do you need bootargs? stdout property does not work?
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v3 0/2] Add Lenovo ThinkEdge SE70 carrier board support
@ 2026-07-01 9:06 Jiqi Li
2026-07-01 9:06 ` [PATCH 2/2] arm64: tegra: Add Lenovo ThinkEdge SE70 device tree Jiqi Li
0 siblings, 1 reply; 8+ messages in thread
From: Jiqi Li @ 2026-07-01 9:06 UTC (permalink / raw)
To: linux-tegra
Cc: devicetree, robh+dt, krzk+dt, conor+dt, krzk, mperttunen,
jonathanh, thierry.reding, mpearson-lenovo, Jiqi Li
This patch set introduces device tree binding and standalone DTS file
for Lenovo ThinkEdge SE70, a fanless industrial edge gateway powered by
the NVIDIA Jetson Xavier NX module (P3668-0001) on a custom carrier board.
Patch 1 updates tegra.yaml bindings to add the three-stage compatible
string matching board + SOM + SoC, following the existing Tegra
carrier board convention.
Patch 2 adds the complete carrier board device tree, including:
- 40-pin expansion header pinmux configuration
- External Micro SD card slot with dedicated 3.3V regulator
- I2C bus for 40-pin header
All static device tree checks pass: dtbs compile and dt_binding_check
complete without errors.
Jiqi Li (2):
dt-bindings: arm: tegra: Add lenovo,thinkedge-se70 compatible string
arm64: tegra: Add Lenovo ThinkEdge SE70 device tree
.../devicetree/bindings/arm/tegra.yaml | 5 +
arch/arm64/boot/dts/nvidia/Makefile | 1 +
.../nvidia/tegra194-lenovo-thinkedge-se70.dts | 113 ++++++++++++++++++
3 files changed, 119 insertions(+)
create mode 100644 arch/arm64/boot/dts/nvidia/tegra194-lenovo-thinkedge-se70.dts
--
2.43.0
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 2/2] arm64: tegra: Add Lenovo ThinkEdge SE70 device tree
2026-07-01 9:06 [PATCH v3 0/2] Add Lenovo ThinkEdge SE70 carrier board support Jiqi Li
@ 2026-07-01 9:06 ` Jiqi Li
0 siblings, 0 replies; 8+ messages in thread
From: Jiqi Li @ 2026-07-01 9:06 UTC (permalink / raw)
To: linux-tegra
Cc: devicetree, robh+dt, krzk+dt, conor+dt, krzk, mperttunen,
jonathanh, thierry.reding, mpearson-lenovo, Jiqi Li
Add initial device tree support for the Lenovo ThinkEdge SE70, an
industrial edge gateway based on the NVIDIA Jetson Xavier NX module
(P3668-0001) with a custom carrier board.
This initial submission includes:
- 40-pin expansion header pinmux configuration
- External Micro SD card slot with dedicated 3.3V regulator
- I2C bus for 40-pin header
Static verification passed: dt_binding_check and dtbs compilation
complete without errors.
Signed-off-by: Jiqi Li <lijq9@lenovo.com>
---
Changes in v2:
- Remove unused input-related headers from baseboard DTSI
Changes in v3:
- Merge baseboard content into main DTS, drop separate baseboard DTSI
- Use stdout-path instead of bootargs in chosen node
---
arch/arm64/boot/dts/nvidia/Makefile | 1 +
.../nvidia/tegra194-lenovo-thinkedge-se70.dts | 113 ++++++++++++++++++
2 files changed, 114 insertions(+)
create mode 100644 arch/arm64/boot/dts/nvidia/tegra194-lenovo-thinkedge-se70.dts
diff --git a/arch/arm64/boot/dts/nvidia/Makefile b/arch/arm64/boot/dts/nvidia/Makefile
index 72c0cb5efa47..736a3f8a923f 100644
--- a/arch/arm64/boot/dts/nvidia/Makefile
+++ b/arch/arm64/boot/dts/nvidia/Makefile
@@ -29,6 +29,7 @@ dtb-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186-p3509-0000+p3636-0001.dtb
dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p2972-0000.dtb
dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0000.dtb
dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0001.dtb
+dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-lenovo-thinkedge-se70.dtb
dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-sim-vdk.dtb
dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3737-0000+p3701-0000.dtb
dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3737-0000+p3701-0008.dtb
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-lenovo-thinkedge-se70.dts b/arch/arm64/boot/dts/nvidia/tegra194-lenovo-thinkedge-se70.dts
new file mode 100644
index 000000000000..530d5bcaeba7
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra194-lenovo-thinkedge-se70.dts
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra194-p3668-0001.dtsi"
+
+#include <dt-bindings/gpio/tegra194-gpio.h>
+
+/ {
+ model = "Lenovo ThinkEdge SE70";
+ compatible = "lenovo,thinkedge-se70", "nvidia,p3668-0001", "nvidia,tegra194";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ vdd_5v0_sys: regulator-vdd-5v0-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_5V_SYS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* Fixed 3.3V power supply regulator for external Micro SD slot */
+ vdd_3v3_sd: regulator-sd-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_3V3_SD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio TEGRA194_MAIN_GPIO(Q, 5) GPIO_ACTIVE_HIGH>;
+ regulator-boot-on;
+ enable-active-high;
+ };
+
+ bus@0 {
+ /* 40-pin expansion header custom pinmux configuration */
+ pinmux@2430000 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinmux_hdr40>;
+
+ pinmux_hdr40: pinmux-hdr40 {
+ pin7 {
+ nvidia,pins = "aud_mclk_ps4";
+ nvidia,function = "aud";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pin11 {
+ nvidia,pins = "uart1_rts_pr4";
+ nvidia,function = "uarta";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pin12 {
+ nvidia,pins = "dap5_sclk_pt5";
+ nvidia,function = "i2s5";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pin35 {
+ nvidia,pins = "dap5_fs_pu0";
+ nvidia,function = "i2s5";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pin36 {
+ nvidia,pins = "uart1_cts_pr5";
+ nvidia,function = "uarta";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pin38 {
+ nvidia,pins = "dap5_din_pt7";
+ nvidia,function = "i2s5";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pin40 {
+ nvidia,pins = "dap5_dout_pt6";
+ nvidia,function = "i2s5";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ };
+ };
+
+ /* Configure i2c bus clock to 400kHz for carrier board peripherals */
+ i2c@3160000 {
+ clock-frequency = <400000>;
+ status = "okay";
+ };
+
+ /* SDMMC3: External Micro SD card slot */
+ mmc@3440000 {
+ bus-width = <4>;
+ cd-gpios = <&gpio_aon TEGRA194_AON_GPIO(CC, 4) GPIO_ACTIVE_LOW>;
+ disable-wp;
+ no-1-8-v;
+ vmmc-supply = <&vdd_3v3_sd>;
+ status = "okay";
+ };
+
+ };
+};
--
2.43.0
^ permalink raw reply related [flat|nested] 8+ messages in thread
end of thread, other threads:[~2026-07-01 9:06 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-06-29 11:11 [PATCH v1 0/2] Add Lenovo ThinkEdge SE70 carrier board support Jiqi Li
2026-06-29 11:11 ` [PATCH 1/2] dt-bindings: arm: tegra: Add lenovo,thinkedge-se70 compatible string Jiqi Li
2026-06-29 15:17 ` Conor Dooley
2026-06-29 11:11 ` [PATCH 2/2] arm64: tegra: Add Lenovo ThinkEdge SE70 device tree Jiqi Li
2026-06-29 11:23 ` sashiko-bot
-- strict thread matches above, loose matches on Subject: below --
2026-06-30 9:17 [PATCH v2 0/2] Add Lenovo ThinkEdge SE70 carrier board support Jiqi Li
2026-06-30 9:17 ` [PATCH 2/2] arm64: tegra: Add Lenovo ThinkEdge SE70 device tree Jiqi Li
2026-06-30 10:02 ` Krzysztof Kozlowski
2026-07-01 9:06 [PATCH v3 0/2] Add Lenovo ThinkEdge SE70 carrier board support Jiqi Li
2026-07-01 9:06 ` [PATCH 2/2] arm64: tegra: Add Lenovo ThinkEdge SE70 device tree Jiqi Li
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.