All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rongguang Wei <clementwei90@163.com>
To: netdev@vger.kernel.org, intel-wired-lan@lists.osuosl.org
Cc: anthony.l.nguyen@intel.com, przemyslaw.kitszel@intel.com,
	andrew+netdev@lunn.ch, Rongguang Wei <weirongguang@kylinos.cn>
Subject: [Intel-wired-lan] [PATCH net-next v1] ice: use dev_err_probe in all appropriate places in ice_probe()
Date: Tue, 30 Jun 2026 11:25:37 +0800	[thread overview]
Message-ID: <20260630032537.42605-1-clementwei90@163.com> (raw)

From: Rongguang Wei <weirongguang@kylinos.cn>

Use dev_err_probe() can conveniently combines printing
an error message with returning the errno and also
simplify the code.

Signed-off-by: Rongguang Wei <weirongguang@kylinos.cn>
---
 drivers/net/ethernet/intel/ice/ice_main.c | 24 ++++++++---------------
 1 file changed, 8 insertions(+), 16 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index e2fbe111f849..81959eaec708 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -5167,10 +5167,8 @@ ice_probe(struct pci_dev *pdev, const struct pci_device_id __always_unused *ent)
 	struct ice_hw *hw;
 	int err;
 
-	if (pdev->is_virtfn) {
-		dev_err(dev, "can't probe a virtual function\n");
-		return -EINVAL;
-	}
+	if (pdev->is_virtfn)
+		return dev_err_probe(dev, -EINVAL, "can't probe a virtual function\n");
 
 	/* when under a kdump kernel initiate a reset before enabling the
 	 * device in order to clear out any pending DMA transactions. These
@@ -5194,10 +5192,8 @@ ice_probe(struct pci_dev *pdev, const struct pci_device_id __always_unused *ent)
 		return err;
 
 	err = pcim_iomap_regions(pdev, BIT(ICE_BAR0), dev_driver_string(dev));
-	if (err) {
-		dev_err(dev, "BAR0 I/O map error %d\n", err);
-		return err;
-	}
+	if (err)
+		return dev_err_probe(dev, err, "BAR0 I/O map error %d\n", err);
 
 	pf = ice_allocate_pf(dev);
 	if (!pf)
@@ -5208,10 +5204,8 @@ ice_probe(struct pci_dev *pdev, const struct pci_device_id __always_unused *ent)
 
 	/* set up for high or low DMA */
 	err = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64));
-	if (err) {
-		dev_err(dev, "DMA configuration failed: 0x%x\n", err);
-		return err;
-	}
+	if (err)
+		return dev_err_probe(dev, err, "DMA configuration failed: 0x%x\n", err);
 
 	pci_set_master(pdev);
 	pf->pdev = pdev;
@@ -5246,10 +5240,8 @@ ice_probe(struct pci_dev *pdev, const struct pci_device_id __always_unused *ent)
 		return ice_probe_recovery_mode(pf);
 
 	err = ice_init_hw(hw);
-	if (err) {
-		dev_err(dev, "ice_init_hw failed: %d\n", err);
-		return err;
-	}
+	if (err)
+		return dev_err_probe(dev, err, "ice_init_hw failed: %d\n", err);
 
 	ice_init_dev_hw(pf);
 
-- 
2.25.1


WARNING: multiple messages have this Message-ID (diff)
From: Rongguang Wei <clementwei90@163.com>
To: netdev@vger.kernel.org, intel-wired-lan@lists.osuosl.org
Cc: anthony.l.nguyen@intel.com, przemyslaw.kitszel@intel.com,
	andrew+netdev@lunn.ch, Rongguang Wei <weirongguang@kylinos.cn>
Subject: [PATCH net-next v1] ice: use dev_err_probe in all appropriate places in ice_probe()
Date: Tue, 30 Jun 2026 11:25:37 +0800	[thread overview]
Message-ID: <20260630032537.42605-1-clementwei90@163.com> (raw)

From: Rongguang Wei <weirongguang@kylinos.cn>

Use dev_err_probe() can conveniently combines printing
an error message with returning the errno and also
simplify the code.

Signed-off-by: Rongguang Wei <weirongguang@kylinos.cn>
---
 drivers/net/ethernet/intel/ice/ice_main.c | 24 ++++++++---------------
 1 file changed, 8 insertions(+), 16 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index e2fbe111f849..81959eaec708 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -5167,10 +5167,8 @@ ice_probe(struct pci_dev *pdev, const struct pci_device_id __always_unused *ent)
 	struct ice_hw *hw;
 	int err;
 
-	if (pdev->is_virtfn) {
-		dev_err(dev, "can't probe a virtual function\n");
-		return -EINVAL;
-	}
+	if (pdev->is_virtfn)
+		return dev_err_probe(dev, -EINVAL, "can't probe a virtual function\n");
 
 	/* when under a kdump kernel initiate a reset before enabling the
 	 * device in order to clear out any pending DMA transactions. These
@@ -5194,10 +5192,8 @@ ice_probe(struct pci_dev *pdev, const struct pci_device_id __always_unused *ent)
 		return err;
 
 	err = pcim_iomap_regions(pdev, BIT(ICE_BAR0), dev_driver_string(dev));
-	if (err) {
-		dev_err(dev, "BAR0 I/O map error %d\n", err);
-		return err;
-	}
+	if (err)
+		return dev_err_probe(dev, err, "BAR0 I/O map error %d\n", err);
 
 	pf = ice_allocate_pf(dev);
 	if (!pf)
@@ -5208,10 +5204,8 @@ ice_probe(struct pci_dev *pdev, const struct pci_device_id __always_unused *ent)
 
 	/* set up for high or low DMA */
 	err = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64));
-	if (err) {
-		dev_err(dev, "DMA configuration failed: 0x%x\n", err);
-		return err;
-	}
+	if (err)
+		return dev_err_probe(dev, err, "DMA configuration failed: 0x%x\n", err);
 
 	pci_set_master(pdev);
 	pf->pdev = pdev;
@@ -5246,10 +5240,8 @@ ice_probe(struct pci_dev *pdev, const struct pci_device_id __always_unused *ent)
 		return ice_probe_recovery_mode(pf);
 
 	err = ice_init_hw(hw);
-	if (err) {
-		dev_err(dev, "ice_init_hw failed: %d\n", err);
-		return err;
-	}
+	if (err)
+		return dev_err_probe(dev, err, "ice_init_hw failed: %d\n", err);
 
 	ice_init_dev_hw(pf);
 
-- 
2.25.1


             reply	other threads:[~2026-06-30  3:26 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-30  3:25 Rongguang Wei [this message]
2026-06-30  3:25 ` [PATCH net-next v1] ice: use dev_err_probe in all appropriate places in ice_probe() Rongguang Wei
2026-06-30  3:43 ` [Intel-wired-lan] " Przemek Kitszel
2026-06-30  3:43   ` Przemek Kitszel
2026-06-30  9:40 ` [Intel-wired-lan] " Loktionov, Aleksandr
2026-06-30  9:40   ` Loktionov, Aleksandr

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260630032537.42605-1-clementwei90@163.com \
    --to=clementwei90@163.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=anthony.l.nguyen@intel.com \
    --cc=intel-wired-lan@lists.osuosl.org \
    --cc=netdev@vger.kernel.org \
    --cc=przemyslaw.kitszel@intel.com \
    --cc=weirongguang@kylinos.cn \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.