[PATCH 18/27] ASoC: codecs: rt5645: Use guard() for mutex locks

[phucduc.bui@gmail.com]

From: bui duc phuc <phucduc.bui@gmail.com>

Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.

Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
---
 sound/soc/codecs/rt5645.c | 160 +++++++++++++++++++-------------------
 1 file changed, 79 insertions(+), 81 deletions(-)

diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c
index e9819653b30d..7cdca9774545 100644
--- a/sound/soc/codecs/rt5645.c
+++ b/sound/soc/codecs/rt5645.c
@@ -6,6 +6,7 @@
  * Author: Bard Liao <bardliao@realtek.com>
  */
 
+#include <linux/cleanup.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/init.h>
@@ -3323,93 +3324,90 @@ static void rt5645_jack_detect_work(struct work_struct *work)
 	if (!rt5645->component)
 		return;
 
-	mutex_lock(&rt5645->jd_mutex);
-
-	switch (rt5645->pdata.jd_mode) {
-	case 0: /* Not using rt5645 JD */
-		if (rt5645->gpiod_hp_det) {
-			gpio_state = gpiod_get_value(rt5645->gpiod_hp_det);
-			if (rt5645->pdata.inv_hp_pol)
-				gpio_state ^= 1;
-			dev_dbg(rt5645->component->dev, "gpio_state = %d\n",
-				gpio_state);
-			report = rt5645_jack_detect(rt5645->component, gpio_state);
+	scoped_guard(mutex, &rt5645->jd_mutex) {
+		switch (rt5645->pdata.jd_mode) {
+		case 0: /* Not using rt5645 JD */
+			if (rt5645->gpiod_hp_det) {
+				gpio_state = gpiod_get_value(rt5645->gpiod_hp_det);
+				if (rt5645->pdata.inv_hp_pol)
+					gpio_state ^= 1;
+				dev_dbg(rt5645->component->dev, "gpio_state = %d\n",
+					gpio_state);
+				report = rt5645_jack_detect(rt5645->component, gpio_state);
+			}
+			snd_soc_jack_report(rt5645->hp_jack,
+					    report, SND_JACK_HEADPHONE);
+			snd_soc_jack_report(rt5645->mic_jack,
+					    report, SND_JACK_MICROPHONE);
+			return;
+		case 4:
+			val = snd_soc_component_read(rt5645->component, RT5645_A_JD_CTRL1) & 0x0020;
+			break;
+		default: /* read rt5645 jd1_1 status */
+			val = snd_soc_component_read(rt5645->component, RT5645_INT_IRQ_ST) & 0x1000;
+			break;
 		}
-		snd_soc_jack_report(rt5645->hp_jack,
-				    report, SND_JACK_HEADPHONE);
-		snd_soc_jack_report(rt5645->mic_jack,
-				    report, SND_JACK_MICROPHONE);
-		mutex_unlock(&rt5645->jd_mutex);
-		return;
-	case 4:
-		val = snd_soc_component_read(rt5645->component, RT5645_A_JD_CTRL1) & 0x0020;
-		break;
-	default: /* read rt5645 jd1_1 status */
-		val = snd_soc_component_read(rt5645->component, RT5645_INT_IRQ_ST) & 0x1000;
-		break;
-
-	}
 
-	if (!val && (rt5645->jack_type == 0)) { /* jack in */
-		report = rt5645_jack_detect(rt5645->component, 1);
-	} else if (!val && rt5645->jack_type == SND_JACK_HEADSET) {
-		/* for push button and jack out */
-		btn_type = 0;
-		if (snd_soc_component_read(rt5645->component, RT5645_INT_IRQ_ST) & 0x4) {
-			/* button pressed */
-			report = SND_JACK_HEADSET;
-			btn_type = rt5645_button_detect(rt5645->component);
-			/* rt5650 can report three kinds of button behavior,
-			   one click, double click and hold. However,
-			   currently we will report button pressed/released
-			   event. So all the three button behaviors are
-			   treated as button pressed. */
-			switch (btn_type) {
-			case 0x8000:
-			case 0x4000:
-			case 0x2000:
-				report |= SND_JACK_BTN_0;
-				break;
-			case 0x1000:
-			case 0x0800:
-			case 0x0400:
-				report |= SND_JACK_BTN_1;
-				break;
-			case 0x0200:
-			case 0x0100:
-			case 0x0080:
-				report |= SND_JACK_BTN_2;
-				break;
-			case 0x0040:
-			case 0x0020:
-			case 0x0010:
-				report |= SND_JACK_BTN_3;
-				break;
-			case 0x0000: /* unpressed */
-				break;
-			default:
-				dev_err(rt5645->component->dev,
-					"Unexpected button code 0x%04x\n",
-					btn_type);
-				break;
+		if (!val && rt5645->jack_type == 0) { /* jack in */
+			report = rt5645_jack_detect(rt5645->component, 1);
+		} else if (!val && rt5645->jack_type == SND_JACK_HEADSET) {
+			/* for push button and jack out */
+			btn_type = 0;
+			if (snd_soc_component_read(rt5645->component, RT5645_INT_IRQ_ST) & 0x4) {
+				/* button pressed */
+				report = SND_JACK_HEADSET;
+				btn_type = rt5645_button_detect(rt5645->component);
+				/*
+				 * rt5650 can report three kinds of button behavior,
+				 * one click, double click and hold. However,
+				 * currently we will report button pressed/released
+				 * event. So all the three button behaviors are
+				 * treated as button pressed.
+				 */
+				switch (btn_type) {
+				case 0x8000:
+				case 0x4000:
+				case 0x2000:
+					report |= SND_JACK_BTN_0;
+					break;
+				case 0x1000:
+				case 0x0800:
+				case 0x0400:
+					report |= SND_JACK_BTN_1;
+					break;
+				case 0x0200:
+				case 0x0100:
+				case 0x0080:
+					report |= SND_JACK_BTN_2;
+					break;
+				case 0x0040:
+				case 0x0020:
+				case 0x0010:
+					report |= SND_JACK_BTN_3;
+					break;
+				case 0x0000: /* unpressed */
+					break;
+				default:
+					dev_err(rt5645->component->dev,
+						"Unexpected button code 0x%04x\n",
+						btn_type);
+					break;
+				}
 			}
+			if (btn_type == 0)/* button release */
+				report =  rt5645->jack_type;
+			else
+				mod_timer(&rt5645->btn_check_timer,
+					  msecs_to_jiffies(100));
+		} else {
+			/* jack out */
+			report = 0;
+			snd_soc_component_update_bits(rt5645->component,
+						      RT5645_INT_IRQ_ST, 0x1, 0x0);
+			rt5645_jack_detect(rt5645->component, 0);
 		}
-		if (btn_type == 0)/* button release */
-			report =  rt5645->jack_type;
-		else {
-			mod_timer(&rt5645->btn_check_timer,
-				msecs_to_jiffies(100));
-		}
-	} else {
-		/* jack out */
-		report = 0;
-		snd_soc_component_update_bits(rt5645->component,
-				    RT5645_INT_IRQ_ST, 0x1, 0x0);
-		rt5645_jack_detect(rt5645->component, 0);
 	}
 
-	mutex_unlock(&rt5645->jd_mutex);
-
 	snd_soc_jack_report(rt5645->hp_jack, report, SND_JACK_HEADPHONE);
 	snd_soc_jack_report(rt5645->mic_jack, report, SND_JACK_MICROPHONE);
 	if (rt5645->en_button_func)
-- 
2.43.0