* please help backporting some patches to stable release 24.11.7
@ 2026-07-06 10:27 luca.boccassi
0 siblings, 0 replies; 2+ messages in thread
From: luca.boccassi @ 2026-07-06 10:27 UTC (permalink / raw)
To: dpdk dev
Cc: dpdk stable, Ajit Khaparde, Anatoly Burakov, Andrew Rybchenko,
Anurag Mandal, Beilei Xing, Bruce Richardson, Ciara Loftus,
Claudia Cauli, Dakota Sicher, David Marchand, Ferruh Yigit,
Jian Wang, Jiawen Wu, Junfeng Guo, Konstantin Ananyev,
Marat Khalili, Maxime Peim, Mingjin Ye, Mohammad Shuab Siddique,
Qi Zhang, Somnath Kotur, Thomas Monjalon, Ting Xu, Tyler Retzlaff,
Vladimir Medvedkin, Xiaoyun Li, Zaiyu Wang
Hi commit authors (and maintainers),
Despite being selected by the DPDK maintenance tool ./devtools/git-log-fixes.sh
I didn't apply following commits from DPDK main to 24.11
stable branch, as conflicts or build errors occur.
Can authors check your patches in the following list and either:
- Backport your patches to the 24.11 branch, or
- Indicate that the patch should not be backported
Please do either of the above by 2026/07/10.
You can find the a temporary work-in-progress branch of the coming 24.11.7
release at:
https://github.com/bluca/dpdk-stable
It is recommended to backport on top of that to minimize further conflicts or
misunderstandings.
Some notes on stable backports:
A backport should contain a reference to the DPDK main branch commit
in it's commit message in the following fashion:
[ upstream commit <commit's dpdk main branch SHA-1 checksum> ]
For example:
https://git.dpdk.org/dpdk-stable/commit/?h=18.11&id=d90e6ae6f936ecdc2fd3811ff9f26aec7f3c06eb
When sending the backported patch, please indicate the target branch in the
subject line, as we have multiple branches, for example:
[PATCH 24.11] foo/bar: fix baz
With git format-patch, this can be achieved by appending the parameter:
--subject-prefix='PATCH 24.11'
Send the backported patch to "stable@dpdk.org" but not "dev@dpdk.org".
FYI, branch 24.11 is located at tree:
https://git.dpdk.org/dpdk-stable
Thanks.
Luca Boccassi
---
ece7d7eef0 Anurag Mandal net/iavf: fix duplicate VF reset during PF reset recovery
8e038dee42 Bruce Richardson net/idpf: fix Tx of large mbuf segments
edff93f638 Dakota Sicher net/bnxt: skip timed Tx pacing setup when unsupported
1c39f3f240 Marat Khalili bpf/validate: fix BPF_JMP empty range handling
7f8ce8d13f Marat Khalili bpf/validate: fix EBPF_JSLT | BPF_X evaluation
b482a764c6 Maxime Peim eal: fix index for non-EAL lcores
26e7538e00 Zaiyu Wang net/txgbe: fix link flow control config for Sapphire
e586adbac0 Zaiyu Wang net/txgbe: fix mass of unknown interrupts
^ permalink raw reply [flat|nested] 2+ messages in thread* please help backporting some patches to stable release 24.11.7
@ 2026-07-13 17:22 luca.boccassi
0 siblings, 0 replies; 2+ messages in thread
From: luca.boccassi @ 2026-07-13 17:22 UTC (permalink / raw)
To: dpdk
Cc: dpdk stable, Akhil Goyal, Ankur Dwivedi, Anoob Joseph,
Archana Muniganti, Ferruh Yigit, Jack Bond-Preston, Jerin Jacob,
Konstantin Ananyev, Morten Brørup, Ravi Kumar,
Siraj Luthfi Ananda, Stephen Hemminger, Sunil Uttarwar,
Tejasree Kondoj, Zbigniew Bodek
Hi commit authors (and maintainers),
Despite being selected by the DPDK maintenance tool ./devtools/git-log-fixes.sh
I didn't apply following commits from DPDK main to 24.11
stable branch, as conflicts or build errors occur.
Can authors check your patches in the following list and either:
- Backport your patches to the 24.11 branch, or
- Indicate that the patch should not be backported
Please do either of the above by 2026/07/20.
You can find the a temporary work-in-progress branch of the coming 24.11.7
release at:
https://github.com/bluca/dpdk-stable
It is recommended to backport on top of that to minimize further conflicts or
misunderstandings.
Some notes on stable backports:
A backport should contain a reference to the DPDK main branch commit
in it's commit message in the following fashion:
[ upstream commit <commit's dpdk main branch SHA-1 checksum> ]
For example:
https://git.dpdk.org/dpdk-stable/commit/?h=18.11&id=d90e6ae6f936ecdc2fd3811ff9f26aec7f3c06eb
When sending the backported patch, please indicate the target branch in the
subject line, as we have multiple branches, for example:
[PATCH 24.11] foo/bar: fix baz
With git format-patch, this can be achieved by appending the parameter:
--subject-prefix='PATCH 24.11'
Send the backported patch to "stable@dpdk.org" but not "dev@dpdk.org".
FYI, branch 24.11 is located at tree:
https://git.dpdk.org/dpdk-stable
Thanks.
Luca Boccassi
---
d84f4082f8 Stephen Hemminger crypto/armv8: use timing-safe digest comparison
752589fb45 Stephen Hemminger crypto/ccp: use timing-safe digest comparison
f72517b8e7 Stephen Hemminger crypto/cnxk: use timing-safe digest comparison
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-07-13 17:22 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-07-06 10:27 please help backporting some patches to stable release 24.11.7 luca.boccassi
-- strict thread matches above, loose matches on Subject: below --
2026-07-13 17:22 luca.boccassi
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.