From: sashiko-bot@kernel.org
To: "Bartosz Golaszewski" <bartosz.golaszewski@oss.qualcomm.com>
Cc: devicetree@vger.kernel.org, robh@kernel.org,
linux-amlogic@lists.infradead.org, Frank.Li@kernel.org,
neil.armstrong@linaro.org, imx@lists.linux.dev,
wsa+renesas@sang-engineering.com, conor+dt@kernel.org,
linux-sunxi@lists.linux.dev
Subject: Re: [PATCH net-next v12 3/7] dt-bindings: net: qcom: document the ethqos device for SCMI-based systems
Date: Tue, 07 Jul 2026 14:11:37 +0000 [thread overview]
Message-ID: <20260707141137.B90881F00A3D@smtp.kernel.org> (raw)
In-Reply-To: <20260706-qcom-sa8255p-emac-v12-3-e3ab1ecf2901@oss.qualcomm.com>
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] The device tree bindings for Nuvoton MA35D1 and Spacemit K3 DWMAC were not updated to restrict `power-domains` to `maxItems: 1`, contradicting the commit message claim and inadvertently relaxing their constraints.
--
commit 172a7357589e2c110ace7edfdec50dee477c4a83
Author: Bartosz Golaszewski <brgl@kernel.org>
dt-bindings: net: qcom: document the ethqos device for SCMI-based systems
This patch describes the firmware-managed variant of the QCom DesignWare MAC.
It introduces the qcom,sa8255p-ethqos binding and increases the power-domains
maximum to 2 in the top-level snps,dwmac.yaml schema, while updating existing
referencing bindings to limit their power-domains maxItems back to 1.
> diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> index 2449311c6d28e..d3aff1df3070d 100644
> --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
[ ... ]
> @@ -185,7 +186,8 @@ properties:
> - const: ahb
>
> power-domains:
> - maxItems: 1
> + minItems: 1
> + maxItems: 2
[Severity: Medium]
The commit message states that existing bindings referencing the top-level
snps,dwmac.yaml were updated to limit their maxItems for power-domains to 1.
Were Nuvoton MA35D1 (nuvoton,ma35d1-dwmac.yaml) and Spacemit K3
(spacemit,k3-dwmac.yaml) missed during this refactoring?
Since both of those schemas inherit from snps,dwmac.yaml, they will now
inadvertently inherit the relaxed maxItems: 2 constraint, allowing invalid
configurations to pass validation.
--
Sashiko AI review · https://sashiko.dev/#/patchset/20260706-qcom-sa8255p-emac-v12-0-e3ab1ecf2901@oss.qualcomm.com?part=3
WARNING: multiple messages have this Message-ID (diff)
From: sashiko-bot@kernel.org
To: "Bartosz Golaszewski" <bartosz.golaszewski@oss.qualcomm.com>
Cc: devicetree@vger.kernel.org, robh@kernel.org,
linux-amlogic@lists.infradead.org, Frank.Li@kernel.org,
neil.armstrong@linaro.org, imx@lists.linux.dev,
wsa+renesas@sang-engineering.com, conor+dt@kernel.org,
linux-sunxi@lists.linux.dev
Subject: Re: [PATCH net-next v12 3/7] dt-bindings: net: qcom: document the ethqos device for SCMI-based systems
Date: Tue, 07 Jul 2026 14:11:37 +0000 [thread overview]
Message-ID: <20260707141137.B90881F00A3D@smtp.kernel.org> (raw)
In-Reply-To: <20260706-qcom-sa8255p-emac-v12-3-e3ab1ecf2901@oss.qualcomm.com>
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] The device tree bindings for Nuvoton MA35D1 and Spacemit K3 DWMAC were not updated to restrict `power-domains` to `maxItems: 1`, contradicting the commit message claim and inadvertently relaxing their constraints.
--
commit 172a7357589e2c110ace7edfdec50dee477c4a83
Author: Bartosz Golaszewski <brgl@kernel.org>
dt-bindings: net: qcom: document the ethqos device for SCMI-based systems
This patch describes the firmware-managed variant of the QCom DesignWare MAC.
It introduces the qcom,sa8255p-ethqos binding and increases the power-domains
maximum to 2 in the top-level snps,dwmac.yaml schema, while updating existing
referencing bindings to limit their power-domains maxItems back to 1.
> diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> index 2449311c6d28e..d3aff1df3070d 100644
> --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
[ ... ]
> @@ -185,7 +186,8 @@ properties:
> - const: ahb
>
> power-domains:
> - maxItems: 1
> + minItems: 1
> + maxItems: 2
[Severity: Medium]
The commit message states that existing bindings referencing the top-level
snps,dwmac.yaml were updated to limit their maxItems for power-domains to 1.
Were Nuvoton MA35D1 (nuvoton,ma35d1-dwmac.yaml) and Spacemit K3
(spacemit,k3-dwmac.yaml) missed during this refactoring?
Since both of those schemas inherit from snps,dwmac.yaml, they will now
inadvertently inherit the relaxed maxItems: 2 constraint, allowing invalid
configurations to pass validation.
--
Sashiko AI review · https://sashiko.dev/#/patchset/20260706-qcom-sa8255p-emac-v12-0-e3ab1ecf2901@oss.qualcomm.com?part=3
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2026-07-07 14:11 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-06 13:20 [PATCH net-next v12 0/7] net: stmmac: qcom-ethqos: add support for SCMI power domains Bartosz Golaszewski
2026-07-06 13:20 ` Bartosz Golaszewski
2026-07-06 13:20 ` Bartosz Golaszewski
2026-07-06 13:20 ` Bartosz Golaszewski
2026-07-06 13:20 ` [PATCH net-next v12 1/7] dt-bindings: phy: document the serdes PHY on sa8255p Bartosz Golaszewski
2026-07-06 13:20 ` Bartosz Golaszewski
2026-07-06 13:20 ` Bartosz Golaszewski
2026-07-06 13:20 ` Bartosz Golaszewski
2026-07-07 14:11 ` sashiko-bot
2026-07-07 14:11 ` sashiko-bot
2026-07-06 13:20 ` [PATCH net-next v12 2/7] phy: qcom: add the SGMII SerDes PHY driver for SCMI systems Bartosz Golaszewski
2026-07-06 13:20 ` Bartosz Golaszewski
2026-07-06 13:20 ` Bartosz Golaszewski
2026-07-06 13:20 ` Bartosz Golaszewski
2026-07-06 17:10 ` Uwe Kleine-König
2026-07-06 17:10 ` Uwe Kleine-König
2026-07-06 17:10 ` Uwe Kleine-König
2026-07-06 17:10 ` Uwe Kleine-König
2026-07-07 14:11 ` sashiko-bot
2026-07-07 14:11 ` sashiko-bot
2026-07-06 13:20 ` [PATCH net-next v12 3/7] dt-bindings: net: qcom: document the ethqos device for SCMI-based systems Bartosz Golaszewski
2026-07-06 13:20 ` Bartosz Golaszewski
2026-07-06 13:20 ` Bartosz Golaszewski
2026-07-06 13:20 ` Bartosz Golaszewski
2026-07-07 14:11 ` sashiko-bot [this message]
2026-07-07 14:11 ` sashiko-bot
2026-07-06 13:20 ` [PATCH net-next v12 4/7] net: stmmac: qcom-ethqos: set serdes mode before powerup Bartosz Golaszewski
2026-07-06 13:20 ` Bartosz Golaszewski
2026-07-06 13:20 ` Bartosz Golaszewski
2026-07-06 13:20 ` Bartosz Golaszewski
2026-07-07 14:11 ` sashiko-bot
2026-07-07 14:11 ` sashiko-bot
2026-07-06 13:20 ` [PATCH net-next v12 5/7] net: stmmac: qcom-ethqos: reuse the address of ethqos_emac_driver_data Bartosz Golaszewski
2026-07-06 13:20 ` Bartosz Golaszewski
2026-07-06 13:20 ` Bartosz Golaszewski
2026-07-06 13:20 ` Bartosz Golaszewski
2026-07-06 13:20 ` [PATCH net-next v12 6/7] net: stmmac: qcom-ethqos: factor out linux-level setup into a separate function Bartosz Golaszewski
2026-07-06 13:20 ` Bartosz Golaszewski
2026-07-06 13:20 ` Bartosz Golaszewski
2026-07-06 13:20 ` Bartosz Golaszewski
2026-07-06 13:20 ` [PATCH net-next v12 7/7] net: stmmac: qcom-ethqos: add support for sa8255p Bartosz Golaszewski
2026-07-06 13:20 ` Bartosz Golaszewski
2026-07-06 13:20 ` Bartosz Golaszewski
2026-07-06 13:20 ` Bartosz Golaszewski
2026-07-07 14:11 ` sashiko-bot
2026-07-07 14:11 ` sashiko-bot
2026-07-07 7:48 ` [PATCH net-next v12 0/7] net: stmmac: qcom-ethqos: add support for SCMI power domains Bartosz Golaszewski
2026-07-07 7:48 ` Bartosz Golaszewski
2026-07-07 7:48 ` Bartosz Golaszewski
2026-07-07 7:48 ` Bartosz Golaszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260707141137.B90881F00A3D@smtp.kernel.org \
--to=sashiko-bot@kernel.org \
--cc=Frank.Li@kernel.org \
--cc=bartosz.golaszewski@oss.qualcomm.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=imx@lists.linux.dev \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=neil.armstrong@linaro.org \
--cc=robh@kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
--cc=wsa+renesas@sang-engineering.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.