From: Jamin Lin <jamin_lin@aspeedtech.com>
To: "Cédric Le Goater" <clg@kaod.org>,
"Peter Maydell" <peter.maydell@linaro.org>,
"Steven Lee" <steven_lee@aspeedtech.com>,
"Troy Lee" <leetroy@gmail.com>,
"Kane Chen" <kane_chen@aspeedtech.com>,
"Andrew Jeffery" <andrew@codeconstruct.com.au>,
"Joel Stanley" <joel@jms.id.au>,
"Pierrick Bouvier" <pierrick.bouvier@oss.qualcomm.com>,
"open list:ASPEED BMCs" <qemu-arm@nongnu.org>,
"open list:All patches CC here" <qemu-devel@nongnu.org>
Cc: Jamin Lin <jamin_lin@aspeedtech.com>, Troy Lee <troy_lee@aspeedtech.com>
Subject: [PATCH v5 07/10] hw/misc/aspeed_scu: Add SCU support for SSP SDRAM remap
Date: Wed, 8 Jul 2026 09:20:34 +0000 [thread overview]
Message-ID: <20260708092023.3826159-8-jamin_lin@aspeedtech.com> (raw)
In-Reply-To: <20260708092023.3826159-1-jamin_lin@aspeedtech.com>
This commit adds SCU register support for SSP SDRAM remap control and runtime
activation. It introduces logic for the PSP to dynamically configure the mapping
of its own DRAM windows into SSP-visible SDRAM space, enabling shared memory
communication via memory region aliases.
- coprocessor_sdram_remap[0]: maps PSP DRAM offset 0x400000000 (size: 0x1A77E000) to SSP SDRAM
offset 0x5880000
- coprocessor_sdram_remap[1]: maps PSP DRAM offset 0x42C000000 (size: 0x05880000) to SSP SDRAM
offset 0x0
The SCU registers AST2700_SCU_SSP_CTRL_1/2 and
AST2700_SCU_SSP_REMAP_ADDR_{1,2} / REMAP_SIZE_{1,2} allow runtime reconfiguration
of alias offset, base, and size.
|------------------------------------------| |----------------------------|
| PSP DRAM | | SSP SDRAM |
|------------------------------------------| |----------------------------|
| 0x4_0000_0000 (SCU_124 << 4) | --> | 0x0000_0000 |
| remap1 base |---| | | - SCU_150: target addr |
| size: 0x1A77E000 (SCU_14C) | | | | remap2 |
|------------------------------------------| | | |----------------------------|
| | | | | |
| 0x4_2C00_0000 (SCU_128 << 4) |-----| | 0x5880000 |
| remap2 base | | | - SCU_148: target addr |
| size: 0x05880000 (SCU_154) | |---> | remap1 |
|------------------------------------------| |----------------------------|
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
hw/misc/aspeed_scu.c | 62 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 62 insertions(+)
diff --git a/hw/misc/aspeed_scu.c b/hw/misc/aspeed_scu.c
index 2a20253410..6eeb1b12e1 100644
--- a/hw/misc/aspeed_scu.c
+++ b/hw/misc/aspeed_scu.c
@@ -147,6 +147,14 @@
/* SSP TSP */
#define AST2700_SCU_SSP_CTRL_0 TO_REG(0x120)
+#define AST2700_SCU_SSP_CTRL_1 TO_REG(0x124)
+#define AST2700_SCU_SSP_CTRL_2 TO_REG(0x128)
+#define AST2700_SCU_SSP_REMAP_ADDR_0 TO_REG(0x140)
+#define AST2700_SCU_SSP_REMAP_SIZE_0 TO_REG(0x144)
+#define AST2700_SCU_SSP_REMAP_ADDR_1 TO_REG(0x148)
+#define AST2700_SCU_SSP_REMAP_SIZE_1 TO_REG(0x14C)
+#define AST2700_SCU_SSP_REMAP_ADDR_2 TO_REG(0x150)
+#define AST2700_SCU_SSP_REMAP_SIZE_2 TO_REG(0x154)
#define AST2700_SCU_TSP_CTRL_0 TO_REG(0x160)
#define AST2700_SSP_TSP_ENABLE BIT(0)
#define AST2700_SSP_TSP_RST BIT(1)
@@ -909,6 +917,7 @@ static void aspeed_ast2700_scu_write(void *opaque, hwaddr offset,
{
Aspeed2700SCUState *a = ASPEED_2700_SCU(opaque);
AspeedSCUState *s = ASPEED_SCU(opaque);
+ MemoryRegion *mr = NULL;
int reg = TO_REG(offset);
/* Truncate here so bitwise operations below behave as expected */
uint32_t data = data64;
@@ -966,6 +975,43 @@ static void aspeed_ast2700_scu_write(void *opaque, hwaddr offset,
data &= ~AST2700_SSP_TSP_ENABLE;
s->regs[reg] = (s->regs[reg] & ~0xff) | (data & 0xff);
return;
+ case AST2700_SCU_SSP_CTRL_1:
+ case AST2700_SCU_SSP_CTRL_2:
+ mr = (reg == AST2700_SCU_SSP_CTRL_1) ?
+ &a->dram_remap_alias[0] : &a->dram_remap_alias[1];
+ if (a->ssp_cpuid < 0 || mr == NULL) {
+ return;
+ }
+ data &= 0x7fffffff;
+ memory_region_transaction_begin();
+ memory_region_set_alias_offset(mr,
+ ((uint64_t) data << 4) & 0x3ffffffff);
+ memory_region_transaction_commit();
+ break;
+ case AST2700_SCU_SSP_REMAP_ADDR_1:
+ case AST2700_SCU_SSP_REMAP_ADDR_2:
+ mr = (reg == AST2700_SCU_SSP_REMAP_ADDR_1) ?
+ &a->dram_remap_alias[0] : &a->dram_remap_alias[1];
+ if (a->ssp_cpuid < 0 || mr == NULL) {
+ return;
+ }
+ data &= 0x3fffffff;
+ memory_region_transaction_begin();
+ memory_region_set_address(mr, data);
+ memory_region_transaction_commit();
+ break;
+ case AST2700_SCU_SSP_REMAP_SIZE_1:
+ case AST2700_SCU_SSP_REMAP_SIZE_2:
+ mr = (reg == AST2700_SCU_SSP_REMAP_SIZE_1) ?
+ &a->dram_remap_alias[0] : &a->dram_remap_alias[1];
+ if (a->ssp_cpuid < 0 || mr == NULL) {
+ return;
+ }
+ data &= 0x3fffffff;
+ memory_region_transaction_begin();
+ memory_region_set_size(mr, data);
+ memory_region_transaction_commit();
+ break;
case AST2700_SCU_SYS_RST_CTRL_1:
if (a->ssp_cpuid < 0) {
return;
@@ -1036,6 +1082,14 @@ static const uint32_t ast2700_a0_resets[ASPEED_AST2700_SCU_NR_REGS] = {
[AST2700_HW_STRAP1_SEC2] = 0x00000000,
[AST2700_HW_STRAP1_SEC3] = 0x1000408F,
[AST2700_SCU_SSP_CTRL_0] = 0x000007FE,
+ [AST2700_SCU_SSP_CTRL_1] = 0x40000000,
+ [AST2700_SCU_SSP_CTRL_2] = 0x42C00000,
+ [AST2700_SCU_SSP_REMAP_ADDR_0] = 0x1FFFE000,
+ [AST2700_SCU_SSP_REMAP_SIZE_0] = 0x00002000,
+ [AST2700_SCU_SSP_REMAP_ADDR_1] = 0x05880000,
+ [AST2700_SCU_SSP_REMAP_SIZE_1] = 0x1A77E000,
+ [AST2700_SCU_SSP_REMAP_ADDR_2] = 0x00000000,
+ [AST2700_SCU_SSP_REMAP_SIZE_2] = 0x05880000,
[AST2700_SCU_TSP_CTRL_0] = 0x000007FE,
[AST2700_SCU_SYS_RST_CTRL_1] = 0xFFC37FDC,
[AST2700_SCU_SYS_RST_CTRL_2] = 0x00001FFF,
@@ -1068,6 +1122,14 @@ static void aspeed_ast2700_scu_reset_hold(Object *obj, ResetType type)
if (a->ssp_cpuid > 0) {
arm_set_cpu_off(a->ssp_cpuid);
+ memory_region_transaction_begin();
+ memory_region_set_address(&a->dram_remap_alias[0], 0x5880000);
+ memory_region_set_alias_offset(&a->dram_remap_alias[0], 0);
+ memory_region_set_size(&a->dram_remap_alias[0], 0x1a77e000);
+ memory_region_set_address(&a->dram_remap_alias[1], 0);
+ memory_region_set_alias_offset(&a->dram_remap_alias[1], 0x2c000000);
+ memory_region_set_size(&a->dram_remap_alias[1], 0x5880000);
+ memory_region_transaction_commit();
}
if (a->tsp_cpuid > 0) {
--
2.43.0
next prev parent reply other threads:[~2026-07-08 9:20 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-08 9:20 [PATCH v5 00/10] Add SSP/TSP power control and DRAM remap support for AST2700 Jamin Lin
2026-07-08 9:20 ` [PATCH v5 01/10] hw/arm/ast27x0: Start SSP in powered-off state to match hardware behavior Jamin Lin
2026-07-08 9:20 ` [PATCH v5 02/10] hw/arm/ast27x0: Start TSP " Jamin Lin
2026-07-08 9:20 ` [PATCH v5 03/10] hw/arm/ast27x0: Add DRAM alias for SSP SDRAM remap Jamin Lin
2026-07-08 9:20 ` [PATCH v5 04/10] hw/arm/ast27x0: Add DRAM alias for TSP " Jamin Lin
2026-07-08 9:20 ` [PATCH v5 05/10] hw/misc/aspeed_scu: Implement SSP reset and power-on control via SCU registers Jamin Lin
2026-07-08 9:20 ` [PATCH v5 06/10] hw/misc/aspeed_scu: Implement TSP " Jamin Lin
2026-07-08 9:20 ` Jamin Lin [this message]
2026-07-08 9:20 ` [PATCH v5 08/10] hw/misc/aspeed_scu: Add SCU support for TSP SDRAM remap Jamin Lin
2026-07-08 9:20 ` [PATCH v5 09/10] tests/functional/aarch64/test_aspeed_ast2700fc: Boot SSP/TSP via PSP and load binaries from DRAM Jamin Lin
2026-07-08 9:20 ` [PATCH v5 10/10] docs: Add support vbootrom and update Manual boot for ast2700fc Jamin Lin
2026-07-08 22:55 ` Philippe Mathieu-Daudé
2026-07-08 22:59 ` [PATCH v5 00/10] Add SSP/TSP power control and DRAM remap support for AST2700 Philippe Mathieu-Daudé
2026-07-09 1:03 ` Jamin Lin
2026-07-09 1:10 ` Jamin Lin
2026-07-09 1:16 ` Murray-Pitts, Lucien
2026-07-13 4:50 ` Jamin Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260708092023.3826159-8-jamin_lin@aspeedtech.com \
--to=jamin_lin@aspeedtech.com \
--cc=andrew@codeconstruct.com.au \
--cc=clg@kaod.org \
--cc=joel@jms.id.au \
--cc=kane_chen@aspeedtech.com \
--cc=leetroy@gmail.com \
--cc=peter.maydell@linaro.org \
--cc=pierrick.bouvier@oss.qualcomm.com \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=steven_lee@aspeedtech.com \
--cc=troy_lee@aspeedtech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.