[PATCH v2 0/3] arm64: dts: qcom: kaanapali: Add SoCCP

[PATCH v2 0/3] arm64: dts: qcom: kaanapali: Add SoCCP

[Jingyi Wang]

Add device tree support for SoCCP on Kaanapali platform. The SoC Control
Processor (SoCCP) is small RISC-V MCU that controls USB Type-C, battery
charging and various other functions on Qualcomm SoCs. On Kaanapali,
SoCCP is brought up by bootloader by default.

Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
---
Changes in v2:
- update commit msg and remove status "okay"
- update node name
- Link to v1: https://lore.kernel.org/r/20260326-knp-soccp-dt-v1-0-a60c2ae36e9b@oss.qualcomm.com

---
Jingyi Wang (3):
      arm64: dts: qcom: kaanapali: Add SoCCP for Kaanapali SoC
      arm64: dts: qcom: kaanapali-qrd: Add SoCCP node
      arm64: dts: qcom: kaanapali-mtp: Add SoCCP node

 arch/arm64/boot/dts/qcom/kaanapali-mtp.dts |  5 +++
 arch/arm64/boot/dts/qcom/kaanapali-qrd.dts |  5 +++
 arch/arm64/boot/dts/qcom/kaanapali.dtsi    | 70 ++++++++++++++++++++++++++++++
 3 files changed, 80 insertions(+)
---
base-commit: b9810cd75b9fb56a3425d391cba3f608502bd474
change-id: 20260709-knp-soccp-dt-acdf8fce81ec

Best regards,
-- 
Jingyi Wang <jingyi.wang@oss.qualcomm.com>

[PATCH v2 1/3] arm64: dts: qcom: kaanapali: Add SoCCP for Kaanapali SoC

[Jingyi Wang]

Add remoteproc PAS loader for SoCCP with its SMP2P. On Kaanapali, it is
brought up by bootloader.

Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/kaanapali.dtsi | 70 +++++++++++++++++++++++++++++++++
 1 file changed, 70 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/kaanapali.dtsi b/arch/arm64/boot/dts/qcom/kaanapali.dtsi
index 0518488f358b..ec5330297c7e 100644
--- a/arch/arm64/boot/dts/qcom/kaanapali.dtsi
+++ b/arch/arm64/boot/dts/qcom/kaanapali.dtsi
@@ -512,6 +512,32 @@ smp2p_cdsp_in: slave-kernel {
 		};
 	};
 
+	smp2p-soccp {
+		compatible = "qcom,smp2p";
+
+		interrupts-extended = <&ipcc IPCC_MPROC_SOCCP
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&ipcc IPCC_MPROC_SOCCP
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,smem = <617>, <616>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <19>;
+
+		soccp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		soccp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
 	soc: soc@0 {
 		compatible = "simple-bus";
 
@@ -1521,6 +1547,50 @@ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
 			};
 		};
 
+		remoteproc_soccp: remoteproc@d00000 {
+			compatible = "qcom,kaanapali-soccp-pas";
+			reg = <0x0 0x00d00000 0x0 0x200000>;
+
+			interrupts-extended = <&intc GIC_SPI 167 IRQ_TYPE_EDGE_RISING>,
+					      <&soccp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&soccp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&soccp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&soccp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&soccp_smp2p_in 9 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack",
+					  "pong";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MX>;
+			power-domain-names = "cx",
+					     "mx";
+
+			memory-region = <&soccp_mem>,
+					<&soccp_dtb_mem>;
+
+			qcom,smem-states = <&soccp_smp2p_out 0>,
+					   <&soccp_smp2p_out 8>;
+			qcom,smem-state-names = "stop",
+						"ping";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_MPROC_SOCCP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_MPROC_SOCCP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+				qcom,remote-pid = <19>;
+				label = "soccp";
+			};
+		};
+
 		rng: rng@10c3000 {
 			compatible = "qcom,kaanapali-trng", "qcom,trng";
 			reg = <0x0 0x010c3000 0x0 0x1000>;

-- 
2.34.1

Re: [PATCH v2 1/3] arm64: dts: qcom: kaanapali: Add SoCCP for Kaanapali SoC

[Konrad Dybcio]

On 7/9/26 10:14 AM, Jingyi Wang wrote:
> Add remoteproc PAS loader for SoCCP with its SMP2P. On Kaanapali, it is
> brought up by bootloader.
> 
> Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad

Re: [PATCH v2 1/3] arm64: dts: qcom: kaanapali: Add SoCCP for Kaanapali SoC

[Dmitry Baryshkov]

On Thu, Jul 09, 2026 at 01:14:23AM -0700, Jingyi Wang wrote:
> Add remoteproc PAS loader for SoCCP with its SMP2P. On Kaanapali, it is
> brought up by bootloader.
> 
> Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
> ---
>  arch/arm64/boot/dts/qcom/kaanapali.dtsi | 70 +++++++++++++++++++++++++++++++++
>  1 file changed, 70 insertions(+)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>


-- 
With best wishes
Dmitry

[PATCH v2 2/3] arm64: dts: qcom: kaanapali-qrd: Add SoCCP node

[Jingyi Wang]

Add SoCCP node on Kaanapali QRD board.

Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/kaanapali-qrd.dts | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/kaanapali-qrd.dts b/arch/arm64/boot/dts/qcom/kaanapali-qrd.dts
index 55d02219ef4e..8ac1c664a7fd 100644
--- a/arch/arm64/boot/dts/qcom/kaanapali-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/kaanapali-qrd.dts
@@ -786,6 +786,11 @@ &remoteproc_cdsp {
 	status = "okay";
 };
 
+&remoteproc_soccp {
+	firmware-name = "qcom/kaanapali/soccp.mbn",
+			"qcom/kaanapali/soccp_dtb.mbn";
+};
+
 &tlmm {
 	gpio-reserved-ranges = <36 4>, /* NFC eSE SPI */
 			       <74 1>, /* eSE */

-- 
2.34.1

Re: [PATCH v2 2/3] arm64: dts: qcom: kaanapali-qrd: Add SoCCP node

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] The board-specific `&remoteproc_soccp` node is missing the `status = "okay";` property, relying on a flawed default in the base device tree.
--

--- Patch [2]: [PATCH v2 2/3] arm64: dts: qcom: kaanapali-qrd: Add SoCCP node ---
commit 499497fe00069ecefb1bec759006b9907810f4e3
Author: Jingyi Wang <jingyi.wang@oss.qualcomm.com>

arm64: dts: qcom: kaanapali-qrd: Add SoCCP node

This commit adds the remote processor firmware configuration for the SoCCP
node on the Kaanapali QRD board.

> diff --git a/arch/arm64/boot/dts/qcom/kaanapali-qrd.dts b/arch/arm64/boot/dts/qcom/kaanapali-qrd.dts
> index 55d02219ef4e9..8ac1c664a7fd4 100644
> --- a/arch/arm64/boot/dts/qcom/kaanapali-qrd.dts
> +++ b/arch/arm64/boot/dts/qcom/kaanapali-qrd.dts

[ ... ]

> @@ -786,6 +786,11 @@ &remoteproc_cdsp {
>  	status = "okay";
>  };
>  
> +&remoteproc_soccp {
> +	firmware-name = "qcom/kaanapali/soccp.mbn",
> +			"qcom/kaanapali/soccp_dtb.mbn";
> +};

[Severity: Medium]
Should this node explicitly include a status = "okay"; property?

While the node might currently function if the base kaanapali.dtsi omitted
a status = "disabled"; declaration, standard Qualcomm remoteproc conventions
typically disable remote processors by default in the base device tree.

If the base device tree is later corrected to follow this convention, the
SoCCP could silently become disabled on this board because it lacks an
explicit enable here.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260709-knp-soccp-dt-v2-0-6e2bfca96088@oss.qualcomm.com?part=2

Re: [PATCH v2 2/3] arm64: dts: qcom: kaanapali-qrd: Add SoCCP node

[Konrad Dybcio]

On 7/9/26 10:14 AM, Jingyi Wang wrote:
> Add SoCCP node on Kaanapali QRD board.
> 
> Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad

Re: [PATCH v2 2/3] arm64: dts: qcom: kaanapali-qrd: Add SoCCP node

[Dmitry Baryshkov]

On Thu, Jul 09, 2026 at 01:14:24AM -0700, Jingyi Wang wrote:
> Add SoCCP node on Kaanapali QRD board.
> 
> Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
> ---
>  arch/arm64/boot/dts/qcom/kaanapali-qrd.dts | 5 +++++
>  1 file changed, 5 insertions(+)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>


-- 
With best wishes
Dmitry

[PATCH v2 3/3] arm64: dts: qcom: kaanapali-mtp: Add SoCCP node

[Jingyi Wang]

Add SoCCP node on Kaanapali MTP board.

Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/kaanapali-mtp.dts | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts b/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts
index f9b5b5718b90..b8d70623dc10 100644
--- a/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts
@@ -1076,6 +1076,11 @@ &remoteproc_cdsp {
 	status = "okay";
 };
 
+&remoteproc_soccp {
+	firmware-name = "qcom/kaanapali/soccp.mbn",
+			"qcom/kaanapali/soccp_dtb.mbn";
+};
+
 &sdhc_2 {
 	cd-gpios = <&tlmm 55 GPIO_ACTIVE_LOW>;
 

-- 
2.34.1

Re: [PATCH v2 3/3] arm64: dts: qcom: kaanapali-mtp: Add SoCCP node

[Konrad Dybcio]

On 7/9/26 10:14 AM, Jingyi Wang wrote:
> Add SoCCP node on Kaanapali MTP board.
> 
> Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad

Re: [PATCH v2 3/3] arm64: dts: qcom: kaanapali-mtp: Add SoCCP node

[Dmitry Baryshkov]

On Thu, Jul 09, 2026 at 01:14:25AM -0700, Jingyi Wang wrote:
> Add SoCCP node on Kaanapali MTP board.
> 
> Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
> ---
>  arch/arm64/boot/dts/qcom/kaanapali-mtp.dts | 5 +++++
>  1 file changed, 5 insertions(+)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>


-- 
With best wishes
Dmitry

Re: [PATCH v2 0/3] arm64: dts: qcom: kaanapali: Add SoCCP

[Bjorn Andersson]

On Thu, 09 Jul 2026 01:14:22 -0700, Jingyi Wang wrote:
> Add device tree support for SoCCP on Kaanapali platform. The SoC Control
> Processor (SoCCP) is small RISC-V MCU that controls USB Type-C, battery
> charging and various other functions on Qualcomm SoCs. On Kaanapali,
> SoCCP is brought up by bootloader by default.
> 
> 

Applied, thanks!

[1/3] arm64: dts: qcom: kaanapali: Add SoCCP for Kaanapali SoC
      commit: 8e1d8b4102b536f0b0e0c0c2f3dc390c5887c2a1
[2/3] arm64: dts: qcom: kaanapali-qrd: Add SoCCP node
      commit: 71f17efc405a5edf882b1aeb760cc777f1599af4
[3/3] arm64: dts: qcom: kaanapali-mtp: Add SoCCP node
      commit: 1c553b3d0cfca9cac2186daea6e2f81808ce7d8b

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>