* [PATCHv2] gpio: mvebu: convert to noirq suspend/resume to prevent interrupt storm on resume
@ 2026-07-10 7:07 Rosen Penev
0 siblings, 0 replies; only message in thread
From: Rosen Penev @ 2026-07-10 7:07 UTC (permalink / raw)
To: linux-gpio; +Cc: Linus Walleij, Bartosz Golaszewski, open list
The driver uses the legacy .suspend/.resume callbacks, but sets
IRQCHIP_MASK_ON_SUSPEND on the irq_chip. During resume, the PM core
runs dpm_resume_noirq() first, which calls irq_pm_resume() to unmask
interrupts, and only then runs dpm_resume() which invokes the driver's
.resume callback to restore GPIO registers (GPIO_IN_POL, GPIO_IO_CONF,
mask registers).
This ordering means interrupts are unmasked while the hardware is still
in its reset state, potentially with incorrect polarities, causing
spurious level-triggered interrupts before local IRQs are re-enabled.
Convert the driver from legacy .suspend/.resume callbacks to noirq
callbacks via dev_pm_ops. The noirq phase runs before resume_device_irqs()
on resume and after suspend_device_irqs() on suspend, ensuring GPIO
registers are restored before interrupts are unmasked.
Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
v2: add __maybe_unused to fix compilation
drivers/gpio/gpio-mvebu.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c
index 7094ab34020c..bd31acf779e6 100644
--- a/drivers/gpio/gpio-mvebu.c
+++ b/drivers/gpio/gpio-mvebu.c
@@ -979,9 +979,9 @@ static const struct of_device_id mvebu_gpio_of_match[] = {
},
};
-static int mvebu_gpio_suspend(struct platform_device *pdev, pm_message_t state)
+static __maybe_unused int mvebu_gpio_suspend(struct device *dev)
{
- struct mvebu_gpio_chip *mvchip = platform_get_drvdata(pdev);
+ struct mvebu_gpio_chip *mvchip = dev_get_drvdata(dev);
int i;
regmap_read(mvchip->regs, GPIO_OUT_OFF + mvchip->offset,
@@ -1031,9 +1031,9 @@ static int mvebu_gpio_suspend(struct platform_device *pdev, pm_message_t state)
return 0;
}
-static int mvebu_gpio_resume(struct platform_device *pdev)
+static __maybe_unused int mvebu_gpio_resume(struct device *dev)
{
- struct mvebu_gpio_chip *mvchip = platform_get_drvdata(pdev);
+ struct mvebu_gpio_chip *mvchip = dev_get_drvdata(dev);
int i;
regmap_write(mvchip->regs, GPIO_OUT_OFF + mvchip->offset,
@@ -1339,13 +1339,16 @@ static int mvebu_gpio_probe(struct platform_device *pdev)
return 0;
}
+static const struct dev_pm_ops mvebu_gpio_pm_ops = {
+ SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(mvebu_gpio_suspend, mvebu_gpio_resume)
+};
+
static struct platform_driver mvebu_gpio_driver = {
.driver = {
.name = "mvebu-gpio",
.of_match_table = mvebu_gpio_of_match,
+ .pm = pm_sleep_ptr(&mvebu_gpio_pm_ops),
},
.probe = mvebu_gpio_probe,
- .suspend = mvebu_gpio_suspend,
- .resume = mvebu_gpio_resume,
};
builtin_platform_driver(mvebu_gpio_driver);
--
2.55.0
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2026-07-10 7:07 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-07-10 7:07 [PATCHv2] gpio: mvebu: convert to noirq suspend/resume to prevent interrupt storm on resume Rosen Penev
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.