From: Jamin Lin <jamin_lin@aspeedtech.com>
To: "peterx@redhat.com" <peterx@redhat.com>,
"Cédric Le Goater" <clg@kaod.org>,
"Peter Maydell" <peter.maydell@linaro.org>,
"Steven Lee" <steven_lee@aspeedtech.com>,
"Troy Lee" <leetroy@gmail.com>,
"Kane Chen" <kane_chen@aspeedtech.com>,
"Andrew Jeffery" <andrew@codeconstruct.com.au>,
"Joel Stanley" <joel@jms.id.au>,
"Philippe Mathieu-Daudé" <philmd@mailo.com>,
"Zhao Liu" <zhao1.liu@intel.com>,
"open list:ASPEED BMCs" <qemu-arm@nongnu.org>,
"open list:All patches CC here" <qemu-devel@nongnu.org>
Cc: "Jamin Lin" <jamin_lin@aspeedtech.com>,
"Troy Lee" <troy_lee@aspeedtech.com>,
"flwu@google.com" <flwu@google.com>,
"nabihestefan@google.com" <nabihestefan@google.com>,
"Cédric Le Goater" <clg@redhat.com>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>
Subject: [PATCH v7 02/10] hw/usb/hcd-ehci: Add property to advertise 64-bit addressing capability
Date: Mon, 13 Jul 2026 03:27:08 +0000 [thread overview]
Message-ID: <20260713032704.3583103-3-jamin_lin@aspeedtech.com> (raw)
In-Reply-To: <20260713032704.3583103-1-jamin_lin@aspeedtech.com>
Introduce a new boolean property, "caps-64bit-addr", to control
HCCPARAMS[0] (64-bit Addressing Capability).
When enabled, the EHCI controller advertises support for 64-bit
address memory pointers as defined in the EHCI specification
(Table 2-7, HCCPARAMS). This allows software to use the 64-bit
data structure formats described in Appendix B.
When disabled (default), the controller reports 32-bit addressing
capability and uses the standard 32-bit data structures.
The EHCI CTRLDSSEGMENT register provides the upper 32 bits [63:32] used to
form 64-bit addresses for EHCI control data structures. Per EHCI 1.0
spec section 2.3.5, when the HCCPARAMS 64-bit Addressing Capability bit
is zero, CTRLDSSEGMENT is not used: software cannot write it and reads
must return zero.
Add a capability check in the operational register write handler and
reject guest writes to CTRLDSSEGMENT when 64-bit addressing is
not enabled.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
hw/usb/hcd-ehci.h | 5 ++++-
hw/usb/hcd-ehci.c | 14 +++++++++++++-
2 files changed, 17 insertions(+), 2 deletions(-)
diff --git a/hw/usb/hcd-ehci.h b/hw/usb/hcd-ehci.h
index cbc32c296d..f739e6371b 100644
--- a/hw/usb/hcd-ehci.h
+++ b/hw/usb/hcd-ehci.h
@@ -261,6 +261,7 @@ struct EHCIState {
* Old machine types only transfer 32-bit fetch addresses.
*/
bool migrate_fetch_addr_64bit;
+ bool caps_64bit_addr;
/*
* EHCI spec version 1.0 Section 2.3
@@ -324,7 +325,9 @@ struct EHCIState {
#define DEFINE_EHCI_COMMON_PROPERTIES(_state) \
DEFINE_PROP_UINT32("maxframes", _state, ehci.maxframes, 128), \
DEFINE_PROP_BOOL("x-migrate-fetch-addr-64bit", _state, \
- ehci.migrate_fetch_addr_64bit, true)
+ ehci.migrate_fetch_addr_64bit, true), \
+ DEFINE_PROP_BOOL("caps-64bit-addr", _state, \
+ ehci.caps_64bit_addr, false)
extern const VMStateDescription vmstate_ehci;
diff --git a/hw/usb/hcd-ehci.c b/hw/usb/hcd-ehci.c
index 1a0c580115..e65ea825b0 100644
--- a/hw/usb/hcd-ehci.c
+++ b/hw/usb/hcd-ehci.c
@@ -1109,6 +1109,15 @@ static void ehci_opreg_write(void *ptr, hwaddr addr,
}
break;
+ case CTRLDSSEGMENT:
+ if (!s->caps_64bit_addr) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "ehci: write to CTRLDSSEGMENT while "
+ "64-bit addressing capability is disabled\n");
+ return;
+ }
+ break;
+
case ASYNCLISTADDR:
if (ehci_async_enabled(s)) {
qemu_log_mask(LOG_GUEST_ERROR,
@@ -2554,6 +2563,9 @@ void usb_ehci_realize(EHCIState *s, DeviceState *dev, Error **errp)
s->maxframes);
return;
}
+ if (s->caps_64bit_addr) {
+ s->caps[0x08] |= BIT(0);
+ }
memory_region_add_subregion(&s->mem, s->capsbase, &s->mem_caps);
memory_region_add_subregion(&s->mem, s->opregbase, &s->mem_opreg);
@@ -2613,7 +2625,7 @@ void usb_ehci_init(EHCIState *s, DeviceState *dev)
s->caps[0x05] = 0x00; /* No companion ports at present */
s->caps[0x06] = 0x00;
s->caps[0x07] = 0x00;
- s->caps[0x08] = 0x80; /* We can cache whole frame, no 64-bit */
+ s->caps[0x08] = 0x80; /* We can cache whole frame */
s->caps[0x0a] = 0x00;
s->caps[0x0b] = 0x00;
--
2.43.0
next prev parent reply other threads:[~2026-07-13 3:29 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-13 3:27 [PATCH v7 00/10] hw/usb/ehci: Add 64-bit descriptor addressing support Jamin Lin
2026-07-13 3:27 ` [PATCH v7 01/10] hw/usb/hcd-ehci: Change descriptor addresses to 64-bit with migration compatibility Jamin Lin
2026-07-13 7:19 ` Philippe Mathieu-Daudé
2026-07-13 3:27 ` Jamin Lin [this message]
2026-07-13 3:27 ` [PATCH v7 03/10] hw/usb/hcd-ehci: Implement 64-bit QH descriptor addressing Jamin Lin
2026-07-13 3:27 ` [PATCH v7 04/10] hw/usb/hcd-ehci: Implement 64-bit qTD " Jamin Lin
2026-07-13 3:27 ` [PATCH v7 05/10] hw/usb/hcd-ehci: Implement 64-bit iTD " Jamin Lin
2026-07-13 3:27 ` [PATCH v7 06/10] hw/usb/hcd-ehci: Implement 64-bit siTD " Jamin Lin
2026-07-13 3:27 ` [PATCH v7 07/10] hw/usb/hcd-ehci: Add ctrldssegment-default property Jamin Lin
2026-07-13 3:27 ` [PATCH v7 08/10] hw/arm/aspeed_ast27x0: Set EHCI ctrldssegment-default Jamin Lin
2026-07-13 3:27 ` [PATCH v7 09/10] hw/arm/aspeed_ast27x0: Enable 64-bit EHCI DMA addressing Jamin Lin
2026-07-13 3:27 ` [PATCH v7 10/10] tests/functional/aarch64/test_aspeed_ast2700: Add USB EHCI test for AST2700 A1/A2 Jamin Lin
2026-07-14 12:18 ` [PATCH v7 00/10] hw/usb/ehci: Add 64-bit descriptor addressing support Cédric Le Goater
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260713032704.3583103-3-jamin_lin@aspeedtech.com \
--to=jamin_lin@aspeedtech.com \
--cc=andrew@codeconstruct.com.au \
--cc=clg@kaod.org \
--cc=clg@redhat.com \
--cc=flwu@google.com \
--cc=joel@jms.id.au \
--cc=kane_chen@aspeedtech.com \
--cc=leetroy@gmail.com \
--cc=nabihestefan@google.com \
--cc=peter.maydell@linaro.org \
--cc=peterx@redhat.com \
--cc=philmd@linaro.org \
--cc=philmd@mailo.com \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=steven_lee@aspeedtech.com \
--cc=troy_lee@aspeedtech.com \
--cc=zhao1.liu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.