From: Peter Fang <peter.fang@intel.com>
To: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>,
Kiryl Shutsemau <kas@kernel.org>,
Rick Edgecombe <rick.p.edgecombe@intel.com>,
"Thomas Gleixner" <tglx@kernel.org>,
Ingo Molnar <mingo@redhat.com>, Borislav Petkov <bp@alien8.de>,
<x86@kernel.org>, "H. Peter Anvin" <hpa@zytor.com>,
<linux-kernel@vger.kernel.org>, <linux-coco@lists.linux.dev>,
<kvm@vger.kernel.org>
Subject: Re: [PATCH 2/2] virt: tdx-guest: Allocate Quote buffer dynamically
Date: Mon, 13 Jul 2026 23:25:02 -0700 [thread overview]
Message-ID: <20260714062502.GE3178326@pedri> (raw)
In-Reply-To: <283d7cc7-e87e-4d4e-b1d9-ae19725e1606@linux.intel.com>
On Mon, Jul 13, 2026 at 10:27:46AM -0700, Kuppuswamy Sathyanarayanan wrote:
> Hi Peter,
>
> On 6/12/2026 4:08 AM, Peter Fang wrote:
> > From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
> >
> > The TDX attestation driver currently uses a fixed 128 KB Quote buffer
> > shared with the host VMM. This may be too small for Quotes using schemes
> > such as post-quantum cryptography (PQC), where certificate chains can
> > increase the Quote size to several megabytes.
> >
> > Allocate the Quote buffer based on the size reported by the TDX module
> > instead of always reserving a fixed-size buffer. This avoids wasting
> > memory on platforms that do not require larger Quotes. Older platforms
> > fall back to the default 128 KB buffer.
> >
> > Because the Quote buffer must be physically contiguous, its size is
> > bound by the buddy allocator's maximum page order (4 MB), which should
> > be sufficient for current attestation needs.
> >
> > struct tdx_quote_buf has a trailing flexible array, so use offsetof()
> > instead of sizeof() to calculate the header size.
> >
> > Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
> > Assisted-by: Claude:claude-opus-4-7
> > Assisted-by: GitHub Copilot:gpt-5.4
> > Signed-off-by: Peter Fang <peter.fang@intel.com>
> > ---
>
> Looks good to me.
>
> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Thanks Sathya!
>
>
> > drivers/virt/coco/tdx-guest/tdx-guest.c | 52 ++++++++++++++++++-------
> > 1 file changed, 38 insertions(+), 14 deletions(-)
> >
> > diff --git a/drivers/virt/coco/tdx-guest/tdx-guest.c b/drivers/virt/coco/tdx-guest/tdx-guest.c
> > index a9ecc46df187..162fb47f3fae 100644
> > --- a/drivers/virt/coco/tdx-guest/tdx-guest.c
> > +++ b/drivers/virt/coco/tdx-guest/tdx-guest.c
> > @@ -163,7 +163,7 @@ static void tdx_mr_deinit(const struct attribute_group *mr_grp)
> > * DICE-based attestation uses layered evidence that requires
> > * larger Quote size (~100K).
> > */
> > -#define GET_QUOTE_BUF_SIZE SZ_128K
> > +#define GET_QUOTE_DEFAULT_BUF_SIZE SZ_128K
> >
> > #define GET_QUOTE_CMD_VER 1
> >
> > @@ -171,7 +171,7 @@ static void tdx_mr_deinit(const struct attribute_group *mr_grp)
> > #define GET_QUOTE_SUCCESS 0
> > #define GET_QUOTE_IN_FLIGHT 0xffffffffffffffff
> >
> > -#define TDX_QUOTE_MAX_LEN (GET_QUOTE_BUF_SIZE - sizeof(struct tdx_quote_buf))
> > +#define TDX_QUOTE_BUF_LEN(n) (offsetof(struct tdx_quote_buf, data) + (n))
> >
> > /* struct tdx_quote_buf: Format of Quote request buffer.
> > * @version: Quote format version, filled by TD.
> > @@ -192,8 +192,9 @@ struct tdx_quote_buf {
> > u8 data[];
> > };
> >
> > -/* Quote data buffer */
> > +/* Quote data buffer and size */
> > static void *quote_data;
> > +static size_t quote_data_size;
> >
[ ... ]
> >
> > @@ -286,7 +310,7 @@ static int tdx_report_new_locked(struct tsm_report *report, void *data)
> > if (desc->inblob_len != TDX_REPORTDATA_LEN)
> > return -EINVAL;
> >
> > - memset(quote_data, 0, GET_QUOTE_BUF_SIZE);
> > + memset(quote_data, 0, quote_data_size);
> >
> > /* Update Quote buffer header */
> > quote_buf->version = GET_QUOTE_CMD_VER;
> > @@ -297,7 +321,7 @@ static int tdx_report_new_locked(struct tsm_report *report, void *data)
> > if (ret)
> > return ret;
> >
> > - err = tdx_hcall_get_quote(quote_data, GET_QUOTE_BUF_SIZE);
> > + err = tdx_hcall_get_quote(quote_data, quote_data_size);
> > if (err) {
> > pr_err("GetQuote hypercall failed, status:%llx\n", err);
> > return -EIO;
> > @@ -316,7 +340,7 @@ static int tdx_report_new_locked(struct tsm_report *report, void *data)
> >
> > out_len = READ_ONCE(quote_buf->out_len);
> >
> > - if (out_len > TDX_QUOTE_MAX_LEN)
> > + if (TDX_QUOTE_BUF_LEN(out_len) > quote_data_size)
> > return -EFBIG;
>
> Nit: I think this check will be more readable if you can rename
> quote_data_size to quote_buf_size (since it holds total buffer
> size).
Hm. This pairs with the original "static void *quote_data". Or perhaps
"quote_data_len"?
>
next prev parent reply other threads:[~2026-07-14 6:25 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-12 11:08 [PATCH 0/2] tdx-guest: Make Quote buffer size dynamic Peter Fang
2026-06-12 11:08 ` [PATCH 1/2] x86/tdx: Add helper to query maximum TD Quote size Peter Fang
2026-06-12 12:36 ` Kiryl Shutsemau
2026-06-23 4:30 ` Peter Fang
2026-07-10 2:38 ` Binbin Wu
2026-07-14 5:54 ` Peter Fang
2026-06-12 14:25 ` Xiaoyao Li
2026-06-23 4:44 ` Peter Fang
2026-07-02 10:16 ` Xiaoyao Li
2026-07-06 9:18 ` Peter Fang
2026-07-13 16:01 ` Kuppuswamy Sathyanarayanan
2026-07-14 5:56 ` Peter Fang
2026-06-12 11:08 ` [PATCH 2/2] virt: tdx-guest: Allocate Quote buffer dynamically Peter Fang
2026-06-12 11:22 ` sashiko-bot
2026-06-12 12:37 ` Kiryl Shutsemau
2026-06-23 5:11 ` Peter Fang
2026-07-10 3:32 ` Binbin Wu
2026-07-14 6:18 ` Peter Fang
2026-07-13 17:27 ` Kuppuswamy Sathyanarayanan
2026-07-14 6:25 ` Peter Fang [this message]
2026-07-14 16:22 ` Kuppuswamy Sathyanarayanan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260714062502.GE3178326@pedri \
--to=peter.fang@intel.com \
--cc=bp@alien8.de \
--cc=dave.hansen@linux.intel.com \
--cc=hpa@zytor.com \
--cc=kas@kernel.org \
--cc=kvm@vger.kernel.org \
--cc=linux-coco@lists.linux.dev \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=rick.p.edgecombe@intel.com \
--cc=sathyanarayanan.kuppuswamy@linux.intel.com \
--cc=tglx@kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.