[PATCH 00/10] ASoC: ti: Improve probe error handling

[PATCH 00/10] ASoC: ti: Improve probe error handling

[phucduc.bui]

From: bui duc phuc <phucduc.bui@gmail.com>

Hi,

This series cleans up probe error handling across several TI ASoC
drivers.

The changes fall into two categories:
 1.Replace dev_err() with dev_err_probe() when reporting probe
   failures. This preserves the original error code while suppressing
   unnecessary log messages for deferred probe errors.
 2.Preserve the original error codes returned by helper functions
   instead of converting them to -ENODEV, and remove redundant error
   messages where the helper already reports the failure.

Best regards,
Phuc

bui duc phuc (10):
  ASoC: ti: ams-delta: Use dev_err_probe() for error handling
  ASoC: ti: davinci-evm: Use dev_err_probe() for error handling
  ASoC: ti: j721e-evm: Return the original error from card name parsing
  ASoC: ti: omap-abe-twl6040: Preserve error code and drop redundant log
  ASoC: ti: omap-abe-twl6040: Use dev_err_probe() for error handling
  ASoC: ti: omap-dmic: Use dev_err_probe() for error handling
  ASoC: ti: omap-hdmi: Use dev_err_probe() for error handling
  ASoC: ti: omap-twl4030: Return the original error code
  ASoC: ti: omap-twl4030: Use dev_err_probe() for error handling
  ASoC: ti: rx51: Use dev_err_probe() for error handling

 sound/soc/ti/ams-delta.c        |  3 +--
 sound/soc/ti/davinci-evm.c      |  2 +-
 sound/soc/ti/j721e-evm.c        |  7 +++----
 sound/soc/ti/omap-abe-twl6040.c | 14 +++++---------
 sound/soc/ti/omap-dmic.c        |  7 +++----
 sound/soc/ti/omap-hdmi.c        |  6 ++----
 sound/soc/ti/omap-twl4030.c     | 15 ++++++---------
 sound/soc/ti/rx51.c             | 28 ++++++++++++----------------
 8 files changed, 33 insertions(+), 49 deletions(-)

-- 
2.43.0

[PATCH 01/10] ASoC: ti: ams-delta: Use dev_err_probe() for error handling

[phucduc.bui]

From: bui duc phuc <phucduc.bui@gmail.com>

Use dev_err_probe() to replace dev_err() followed by returning
the error code. This keeps the error handling concise and
suppresses log messages for deferred probe errors.

Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
---
 sound/soc/ti/ams-delta.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/sound/soc/ti/ams-delta.c b/sound/soc/ti/ams-delta.c
index 61252359d5cb..1c9342ceaf56 100644
--- a/sound/soc/ti/ams-delta.c
+++ b/sound/soc/ti/ams-delta.c
@@ -574,9 +574,8 @@ static int ams_delta_probe(struct platform_device *pdev)
 
 	ret = snd_soc_register_card(card);
 	if (ret) {
-		dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", ret);
 		card->dev = NULL;
-		return ret;
+		return dev_err_probe(&pdev->dev, ret, "snd_soc_register_card failed\n");
 	}
 	return 0;
 }
-- 
2.43.0

Re: [PATCH 01/10] ASoC: ti: ams-delta: Use dev_err_probe() for error handling

[Christophe JAILLET]

Le 14/07/2026 à 14:00, phucduc.bui@gmail.com a écrit :
> From: bui duc phuc <phucduc.bui@gmail.com>
> 
> Use dev_err_probe() to replace dev_err() followed by returning
> the error code. This keeps the error handling concise and
> suppresses log messages for deferred probe errors.
> 
> Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
> ---
>   sound/soc/ti/ams-delta.c | 3 +--
>   1 file changed, 1 insertion(+), 2 deletions(-)
> 
> diff --git a/sound/soc/ti/ams-delta.c b/sound/soc/ti/ams-delta.c
> index 61252359d5cb..1c9342ceaf56 100644
> --- a/sound/soc/ti/ams-delta.c
> +++ b/sound/soc/ti/ams-delta.c
> @@ -574,9 +574,8 @@ static int ams_delta_probe(struct platform_device *pdev)
>   
>   	ret = snd_soc_register_card(card);
>   	if (ret) {
> -		dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", ret);
>   		card->dev = NULL;
> -		return ret;
> +		return dev_err_probe(&pdev->dev, ret, "snd_soc_register_card failed\n");

Nitpick: could add some () (i.e. snd_soc_register_card()) to match patch 
9/10.

CJ

>   	}
>   	return 0;
>   }

Re: [PATCH 01/10] ASoC: ti: ams-delta: Use dev_err_probe() for error handling

[Bui Duc Phuc]

Hi Christophe,

Thank you for your review.

>
> Nitpick: could add some () (i.e. snd_soc_register_card()) to match patch
> 9/10.
>
> CJ
>

I'll fix this in the next version.

Best regards,
Phuc

[PATCH 02/10] ASoC: ti: davinci-evm: Use dev_err_probe() for error handling

[phucduc.bui]

From: bui duc phuc <phucduc.bui@gmail.com>

Replace dev_err() with dev_err_probe() when reporting
devm_snd_soc_register_card() failures. This suppresses
unnecessary log messages for deferred probe errors.

Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
---
 sound/soc/ti/davinci-evm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/ti/davinci-evm.c b/sound/soc/ti/davinci-evm.c
index ad514c2e5a25..7bcbb0067e25 100644
--- a/sound/soc/ti/davinci-evm.c
+++ b/sound/soc/ti/davinci-evm.c
@@ -247,7 +247,7 @@ static int davinci_evm_probe(struct platform_device *pdev)
 	ret = devm_snd_soc_register_card(&pdev->dev, &evm_soc_card);
 
 	if (ret) {
-		dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", ret);
+		dev_err_probe(&pdev->dev, ret, "snd_soc_register_card failed\n");
 		goto err_put;
 	}
 
-- 
2.43.0

Re: [PATCH 02/10] ASoC: ti: davinci-evm: Use dev_err_probe() for error handling

[Christophe JAILLET]

Le 14/07/2026 à 14:00, phucduc.bui@gmail.com a écrit :
> From: bui duc phuc <phucduc.bui@gmail.com>
> 
> Replace dev_err() with dev_err_probe() when reporting
> devm_snd_soc_register_card() failures. This suppresses
> unnecessary log messages for deferred probe errors.
> 
> Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
> ---
>   sound/soc/ti/davinci-evm.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/sound/soc/ti/davinci-evm.c b/sound/soc/ti/davinci-evm.c
> index ad514c2e5a25..7bcbb0067e25 100644
> --- a/sound/soc/ti/davinci-evm.c
> +++ b/sound/soc/ti/davinci-evm.c
> @@ -247,7 +247,7 @@ static int davinci_evm_probe(struct platform_device *pdev)
>   	ret = devm_snd_soc_register_card(&pdev->dev, &evm_soc_card);
>   

Nitpick: this blank new line could be removed.

CJ

>   	if (ret) {
> -		dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", ret);
> +		dev_err_probe(&pdev->dev, ret, "snd_soc_register_card failed\n");
>   		goto err_put;
>   	}
>   

Re: [PATCH 02/10] ASoC: ti: davinci-evm: Use dev_err_probe() for error handling

[Christophe JAILLET]

Le 14/07/2026 à 14:00, phucduc.bui@gmail.com a écrit :
> From: bui duc phuc <phucduc.bui@gmail.com>
> 
> Replace dev_err() with dev_err_probe() when reporting
> devm_snd_soc_register_card() failures. This suppresses
> unnecessary log messages for deferred probe errors.
> 
> Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
> ---
>   sound/soc/ti/davinci-evm.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/sound/soc/ti/davinci-evm.c b/sound/soc/ti/davinci-evm.c
> index ad514c2e5a25..7bcbb0067e25 100644
> --- a/sound/soc/ti/davinci-evm.c
> +++ b/sound/soc/ti/davinci-evm.c
> @@ -247,7 +247,7 @@ static int davinci_evm_probe(struct platform_device *pdev)
>   	ret = devm_snd_soc_register_card(&pdev->dev, &evm_soc_card);
>   

Nitpick: this blank new line could be removed.

>   	if (ret) {
> -		dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", ret);
> +		dev_err_probe(&pdev->dev, ret, "snd_soc_register_card failed\n");

Nitpick: Could be snd_soc_register_card()

>   		goto err_put;
>   	}
>   

CJ

Re: [PATCH 02/10] ASoC: ti: davinci-evm: Use dev_err_probe() for error handling

[Bui Duc Phuc]

Hi Christophe,

Thank you for your review.

> Nitpick: this blank new line could be removed.
>
> >       if (ret) {
> > -             dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", ret);
> > +             dev_err_probe(&pdev->dev, ret, "snd_soc_register_card failed\n");
>
> Nitpick: Could be snd_soc_register_card()
>
> >               goto err_put;
> >       }
> >

I'll fix this in the next version.

Best regards,
Phuc

[PATCH 03/10] ASoC: ti: j721e-evm: Return the original error from card name parsing

[phucduc.bui]

From: bui duc phuc <phucduc.bui@gmail.com>

Return the error from snd_soc_of_parse_card_name() directly instead of
converting it to -ENODEV. The helper already logs the error, so drop the
redundant dev_err().

Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
---
 sound/soc/ti/j721e-evm.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/sound/soc/ti/j721e-evm.c b/sound/soc/ti/j721e-evm.c
index 312298e0b004..600897a3e1c5 100644
--- a/sound/soc/ti/j721e-evm.c
+++ b/sound/soc/ti/j721e-evm.c
@@ -870,10 +870,9 @@ static int j721e_soc_probe(struct platform_device *pdev)
 	card->num_dapm_routes = ARRAY_SIZE(j721e_cpb_dapm_routes);
 	card->fully_routed = 1;
 
-	if (snd_soc_of_parse_card_name(card, "model")) {
-		dev_err(&pdev->dev, "Card name is not provided\n");
-		return -ENODEV;
-	}
+	ret = snd_soc_of_parse_card_name(card, "model");
+	if (ret)
+		return ret;
 
 	link_cnt = 0;
 	conf_cnt = 0;
-- 
2.43.0

[PATCH 04/10] ASoC: ti: omap-abe-twl6040: Preserve error code and drop redundant log

[phucduc.bui]

From: bui duc phuc <phucduc.bui@gmail.com>

Return the original errors from the OF parsing helpers and remove the
redundant error messages, as the helpers already report failures.

Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
---
 sound/soc/ti/omap-abe-twl6040.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

diff --git a/sound/soc/ti/omap-abe-twl6040.c b/sound/soc/ti/omap-abe-twl6040.c
index 56aa4b22083b..dfa931071d81 100644
--- a/sound/soc/ti/omap-abe-twl6040.c
+++ b/sound/soc/ti/omap-abe-twl6040.c
@@ -234,16 +234,13 @@ static int omap_abe_probe(struct platform_device *pdev)
 	card->dapm_routes = audio_map;
 	card->num_dapm_routes = ARRAY_SIZE(audio_map);
 
-	if (snd_soc_of_parse_card_name(card, "ti,model")) {
-		dev_err(&pdev->dev, "Card name is not provided\n");
-		return -ENODEV;
-	}
+	ret = snd_soc_of_parse_card_name(card, "ti,model");
+	if (ret)
+		return ret;
 
 	ret = snd_soc_of_parse_audio_routing(card, "ti,audio-routing");
-	if (ret) {
-		dev_err(&pdev->dev, "Error while parsing DAPM routing\n");
+	if (ret)
 		return ret;
-	}
 
 	dai_node = of_parse_phandle(node, "ti,mcpdm", 0);
 	if (!dai_node) {
-- 
2.43.0

[PATCH 05/10] ASoC: ti: omap-abe-twl6040: Use dev_err_probe() for error handling

[phucduc.bui]

From: bui duc phuc <phucduc.bui@gmail.com>

Replace dev_err() with dev_err_probe() when reporting
devm_snd_soc_register_card() failures. This suppresses
unnecessary log messages for deferred probe errors.

Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
---
 sound/soc/ti/omap-abe-twl6040.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/sound/soc/ti/omap-abe-twl6040.c b/sound/soc/ti/omap-abe-twl6040.c
index dfa931071d81..d86cdd312efe 100644
--- a/sound/soc/ti/omap-abe-twl6040.c
+++ b/sound/soc/ti/omap-abe-twl6040.c
@@ -296,8 +296,7 @@ static int omap_abe_probe(struct platform_device *pdev)
 
 	ret = devm_snd_soc_register_card(&pdev->dev, card);
 	if (ret)
-		dev_err(&pdev->dev, "devm_snd_soc_register_card() failed: %d\n",
-			ret);
+		dev_err_probe(&pdev->dev, ret, "devm_snd_soc_register_card() failed\n");
 
 	return ret;
 }
-- 
2.43.0

[PATCH 06/10] ASoC: ti: omap-dmic: Use dev_err_probe() for error handling

[phucduc.bui]

From: bui duc phuc <phucduc.bui@gmail.com>

Replace dev_err() with dev_err_probe() when handling clock lookup
failures. This preserves the original error code and suppresses
unnecessary deferred probe error messages.

Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
---
 sound/soc/ti/omap-dmic.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/sound/soc/ti/omap-dmic.c b/sound/soc/ti/omap-dmic.c
index b795b9f66b0e..c8d791f05ae4 100644
--- a/sound/soc/ti/omap-dmic.c
+++ b/sound/soc/ti/omap-dmic.c
@@ -465,10 +465,9 @@ static int asoc_dmic_probe(struct platform_device *pdev)
 	mutex_init(&dmic->mutex);
 
 	dmic->fclk = devm_clk_get(dmic->dev, "fck");
-	if (IS_ERR(dmic->fclk)) {
-		dev_err(dmic->dev, "can't get fck\n");
-		return -ENODEV;
-	}
+	if (IS_ERR(dmic->fclk))
+		return dev_err_probe(dmic->dev, PTR_ERR(dmic->fclk),
+				     "can't get fck\n");
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dma");
 	if (!res) {
-- 
2.43.0

[PATCH 07/10] ASoC: ti: omap-hdmi: Use dev_err_probe() for error handling

[phucduc.bui]

From: bui duc phuc <phucduc.bui@gmail.com>

Replace dev_err() with dev_err_probe() when reporting
devm_snd_soc_register_card() failures. This suppresses
unnecessary log messages for deferred probe errors.

Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
---
 sound/soc/ti/omap-hdmi.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/sound/soc/ti/omap-hdmi.c b/sound/soc/ti/omap-hdmi.c
index e60f5b483fc5..72114965c37d 100644
--- a/sound/soc/ti/omap-hdmi.c
+++ b/sound/soc/ti/omap-hdmi.c
@@ -375,10 +375,8 @@ static int omap_hdmi_audio_probe(struct platform_device *pdev)
 	card->dev = dev;
 
 	ret = devm_snd_soc_register_card(dev, card);
-	if (ret) {
-		dev_err(dev, "snd_soc_register_card failed (%d)\n", ret);
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret, "snd_soc_register_card failed\n");
 
 	ad->card = card;
 	snd_soc_card_set_drvdata(card, ad);
-- 
2.43.0

[PATCH 08/10] ASoC: ti: omap-twl4030: Return the original error code

[phucduc.bui]

From: bui duc phuc <phucduc.bui@gmail.com>

Return the error from snd_soc_of_parse_card_name() directly and drop
the redundant error message since the helper already logs the failure.

Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
---
 sound/soc/ti/omap-twl4030.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/sound/soc/ti/omap-twl4030.c b/sound/soc/ti/omap-twl4030.c
index 4d80f8a7a947..2a80e44035d7 100644
--- a/sound/soc/ti/omap-twl4030.c
+++ b/sound/soc/ti/omap-twl4030.c
@@ -253,10 +253,9 @@ static int omap_twl4030_probe(struct platform_device *pdev)
 		struct device_node *dai_node;
 		struct property *prop;
 
-		if (snd_soc_of_parse_card_name(card, "ti,model")) {
-			dev_err(&pdev->dev, "Card name is not provided\n");
-			return -ENODEV;
-		}
+		ret = snd_soc_of_parse_card_name(card, "ti,model");
+		if (ret)
+			return ret;
 
 		dai_node = of_parse_phandle(node, "ti,mcbsp", 0);
 		if (!dai_node) {
-- 
2.43.0

[PATCH 09/10] ASoC: ti: omap-twl4030: Use dev_err_probe() for error handling

[phucduc.bui]

From: bui duc phuc <phucduc.bui@gmail.com>

Replace dev_err() with dev_err_probe() when reporting
devm_snd_soc_register_card() failures. This suppresses
unnecessary log messages for deferred probe errors.

Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
---
 sound/soc/ti/omap-twl4030.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/sound/soc/ti/omap-twl4030.c b/sound/soc/ti/omap-twl4030.c
index 2a80e44035d7..576f4d3615e8 100644
--- a/sound/soc/ti/omap-twl4030.c
+++ b/sound/soc/ti/omap-twl4030.c
@@ -306,11 +306,9 @@ static int omap_twl4030_probe(struct platform_device *pdev)
 
 	snd_soc_card_set_drvdata(card, priv);
 	ret = devm_snd_soc_register_card(&pdev->dev, card);
-	if (ret) {
-		dev_err(&pdev->dev, "devm_snd_soc_register_card() failed: %d\n",
-			ret);
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret,
+				     "devm_snd_soc_register_card() failed\n");
 
 	return 0;
 }
-- 
2.43.0

[PATCH 10/10] ASoC: ti: rx51: Use dev_err_probe() for error handling

[phucduc.bui]

From: bui duc phuc <phucduc.bui@gmail.com>

Replace dev_err() with dev_err_probe() when reporting probe
failures. This preserves the original error code and suppresses
unnecessary log messages for deferred probe errors.

Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
---
 sound/soc/ti/rx51.c | 28 ++++++++++++----------------
 1 file changed, 12 insertions(+), 16 deletions(-)

diff --git a/sound/soc/ti/rx51.c b/sound/soc/ti/rx51.c
index cfc23e0838c2..46053b8f3202 100644
--- a/sound/soc/ti/rx51.c
+++ b/sound/soc/ti/rx51.c
@@ -418,31 +418,27 @@ static int rx51_soc_probe(struct platform_device *pdev)
 	pdata->tvout_selection_gpio = devm_gpiod_get(card->dev,
 						     "tvout-selection",
 						     GPIOD_OUT_LOW);
-	if (IS_ERR(pdata->tvout_selection_gpio)) {
-		dev_err(card->dev, "could not get tvout selection gpio\n");
-		return PTR_ERR(pdata->tvout_selection_gpio);
-	}
+	if (IS_ERR(pdata->tvout_selection_gpio))
+		return dev_err_probe(card->dev, PTR_ERR(pdata->tvout_selection_gpio),
+				     "could not get tvout selection gpio\n");
 
 	pdata->eci_sw_gpio = devm_gpiod_get(card->dev, "eci-switch",
 					    GPIOD_OUT_HIGH);
-	if (IS_ERR(pdata->eci_sw_gpio)) {
-		dev_err(card->dev, "could not get eci switch gpio\n");
-		return PTR_ERR(pdata->eci_sw_gpio);
-	}
+	if (IS_ERR(pdata->eci_sw_gpio))
+		return dev_err_probe(card->dev, PTR_ERR(pdata->eci_sw_gpio),
+				     "could not get eci switch gpio\n");
 
 	pdata->speaker_amp_gpio = devm_gpiod_get(card->dev,
 						 "speaker-amplifier",
 						 GPIOD_OUT_LOW);
-	if (IS_ERR(pdata->speaker_amp_gpio)) {
-		dev_err(card->dev, "could not get speaker enable gpio\n");
-		return PTR_ERR(pdata->speaker_amp_gpio);
-	}
+	if (IS_ERR(pdata->speaker_amp_gpio))
+		return dev_err_probe(card->dev, PTR_ERR(pdata->speaker_amp_gpio),
+				     "could not get speaker enable gpio\n");
 
 	err = devm_snd_soc_register_card(card->dev, card);
-	if (err) {
-		dev_err(card->dev, "snd_soc_register_card failed (%d)\n", err);
-		return err;
-	}
+	if (err)
+		return dev_err_probe(card->dev, err,
+				     "snd_soc_register_card failed\n");
 
 	return 0;
 }
-- 
2.43.0