All of lore.kernel.org
 help / color / mirror / Atom feed
From: Coia Prant <coiaprant@gmail.com>
To: kuba@kernel.org, davem@davemloft.net, edumazet@google.com,
	pabeni@redhat.com, andrew+netdev@lunn.ch, robh@kernel.org,
	krzk+dt@kernel.org, heiko@sntech.de
Cc: netdev@vger.kernel.org, linux-rockchip@lists.infradead.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-phy@lists.infradead.org, Coia Prant <coiaprant@gmail.com>
Subject: [RFC PATCH 06/10] net: pcs: xpcs: improve SGMII AN state handling for Rockchip RK3568
Date: Wed, 15 Jul 2026 03:08:34 +0800	[thread overview]
Message-ID: <20260714191341.690906-7-coiaprant@gmail.com> (raw)
In-Reply-To: <20260714191341.690906-1-coiaprant@gmail.com>

Commit 2a22b7ae2fa3 ("net: pcs: xpcs: adapt Wangxun NICs for SGMII mode")
added support for reading CL37_ANCMPLT_INTR and then reading BMCR for
speed/duplex.  This may work on Wangxun hardware but not on RK3568.

On RK3568, reading BMCR returns a fixed value (HW Reset Value or Write
Manual) instead of the negotiated result, so the correct speed/duplex
must be read from CL37_ANSGM_STS.  Also, when the link is down,
CL37_ANCMPLT_INTR stays set and the PCS does not restart AN automatically
when the PHY link returns, so an explicit AN restart via BMCR_ANRESTART
is needed.

Modify xpcs_get_state_c37_sgmii() to check CL37_ANSGM_STS for link
status first.  If the link is up, report the state.  If AN is complete
(CL37_ANCMPLT_INTR set), clear the interrupt and restart AN for
non-Wangxun platforms.  The original Wangxun-specific path is kept
unchanged unless we confirm it's a bug not a feature.

Also clear CL37 AN complete status in xpcs_config_aneg_c37_sgmii()
before starting AN to ensure a clean initial state.

Fixes: 2a22b7ae2fa3 ("net: pcs: xpcs: adapt Wangxun NICs for SGMII mode")
Signed-off-by: Coia Prant <coiaprant@gmail.com>
---
 drivers/net/pcs/pcs-xpcs.c | 31 ++++++++++++++++++++++++++++---
 1 file changed, 28 insertions(+), 3 deletions(-)

diff --git a/drivers/net/pcs/pcs-xpcs.c b/drivers/net/pcs/pcs-xpcs.c
index e69fa2f0a0e8d..cf370ba247cac 100644
--- a/drivers/net/pcs/pcs-xpcs.c
+++ b/drivers/net/pcs/pcs-xpcs.c
@@ -816,6 +816,11 @@ static int xpcs_config_aneg_c37_sgmii(struct dw_xpcs *xpcs,
 	if (ret < 0)
 		return ret;
 
+	/* Clear CL37 AN complete status */
+	ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_INTR_STS, 0);
+	if (ret < 0)
+		return ret;
+
 	if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED)
 		ret = xpcs_write(xpcs, MDIO_MMD_VEND2, MII_BMCR,
 				 mdio_ctrl | BMCR_ANENABLE);
@@ -884,7 +889,7 @@ static int xpcs_config_aneg_c37_1000basex(struct dw_xpcs *xpcs,
 
 	if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED) {
 		ret = xpcs_write(xpcs, MDIO_MMD_VEND2, MII_BMCR,
-				 mdio_ctrl | BMCR_ANENABLE);
+				 mdio_ctrl | BMCR_ANENABLE | BMCR_ANRESTART);
 		if (ret < 0)
 			return ret;
 	}
@@ -1058,6 +1063,7 @@ static int xpcs_get_state_c37_sgmii(struct dw_xpcs *xpcs,
 
 	/* Reset link_state */
 	state->link = false;
+	state->an_complete = false;
 	state->speed = SPEED_UNKNOWN;
 	state->duplex = DUPLEX_UNKNOWN;
 	state->pause = 0;
@@ -1069,6 +1075,8 @@ static int xpcs_get_state_c37_sgmii(struct dw_xpcs *xpcs,
 	if (ret < 0)
 		return ret;
 
+	state->an_complete = ret & DW_VR_MII_AN_STS_C37_ANCMPLT_INTR;
+
 	if (ret & DW_VR_MII_C37_ANSGM_SP_LNKSTS) {
 		int speed_value;
 
@@ -1086,7 +1094,24 @@ static int xpcs_get_state_c37_sgmii(struct dw_xpcs *xpcs,
 			state->duplex = DUPLEX_FULL;
 		else
 			state->duplex = DUPLEX_HALF;
-	} else if (ret == DW_VR_MII_AN_STS_C37_ANCMPLT_INTR) {
+
+		return 0;
+	}
+
+	/* Clear AN complete status or interrupt */
+	if (state->an_complete)
+		xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_INTR_STS, 0);
+
+	if (xpcs->info.pma != WX_TXGBE_XPCS_PMA_10G_ID) {
+		/* If the link down, restart Auto-Negotiation */
+		if (state->an_complete)
+			xpcs_modify(xpcs, MDIO_MMD_VEND2, MII_BMCR, BMCR_ANRESTART,
+				    BMCR_ANRESTART);
+
+		return 0;
+	}
+
+	if (ret == DW_VR_MII_AN_STS_C37_ANCMPLT_INTR) {
 		int speed, duplex;
 
 		state->link = true;
@@ -1112,7 +1137,7 @@ static int xpcs_get_state_c37_sgmii(struct dw_xpcs *xpcs,
 		else if (duplex & ADVERTISE_1000XHALF)
 			state->duplex = DUPLEX_HALF;
 
-		xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_INTR_STS, 0);
+		return 0;
 	}
 
 	return 0;
-- 
2.47.3


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

WARNING: multiple messages have this Message-ID (diff)
From: Coia Prant <coiaprant@gmail.com>
To: kuba@kernel.org, davem@davemloft.net, edumazet@google.com,
	pabeni@redhat.com, andrew+netdev@lunn.ch, robh@kernel.org,
	krzk+dt@kernel.org, heiko@sntech.de
Cc: netdev@vger.kernel.org, linux-rockchip@lists.infradead.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-phy@lists.infradead.org, Coia Prant <coiaprant@gmail.com>
Subject: [RFC PATCH 06/10] net: pcs: xpcs: improve SGMII AN state handling for Rockchip RK3568
Date: Wed, 15 Jul 2026 03:08:34 +0800	[thread overview]
Message-ID: <20260714191341.690906-7-coiaprant@gmail.com> (raw)
In-Reply-To: <20260714191341.690906-1-coiaprant@gmail.com>

Commit 2a22b7ae2fa3 ("net: pcs: xpcs: adapt Wangxun NICs for SGMII mode")
added support for reading CL37_ANCMPLT_INTR and then reading BMCR for
speed/duplex.  This may work on Wangxun hardware but not on RK3568.

On RK3568, reading BMCR returns a fixed value (HW Reset Value or Write
Manual) instead of the negotiated result, so the correct speed/duplex
must be read from CL37_ANSGM_STS.  Also, when the link is down,
CL37_ANCMPLT_INTR stays set and the PCS does not restart AN automatically
when the PHY link returns, so an explicit AN restart via BMCR_ANRESTART
is needed.

Modify xpcs_get_state_c37_sgmii() to check CL37_ANSGM_STS for link
status first.  If the link is up, report the state.  If AN is complete
(CL37_ANCMPLT_INTR set), clear the interrupt and restart AN for
non-Wangxun platforms.  The original Wangxun-specific path is kept
unchanged unless we confirm it's a bug not a feature.

Also clear CL37 AN complete status in xpcs_config_aneg_c37_sgmii()
before starting AN to ensure a clean initial state.

Fixes: 2a22b7ae2fa3 ("net: pcs: xpcs: adapt Wangxun NICs for SGMII mode")
Signed-off-by: Coia Prant <coiaprant@gmail.com>
---
 drivers/net/pcs/pcs-xpcs.c | 31 ++++++++++++++++++++++++++++---
 1 file changed, 28 insertions(+), 3 deletions(-)

diff --git a/drivers/net/pcs/pcs-xpcs.c b/drivers/net/pcs/pcs-xpcs.c
index e69fa2f0a0e8d..cf370ba247cac 100644
--- a/drivers/net/pcs/pcs-xpcs.c
+++ b/drivers/net/pcs/pcs-xpcs.c
@@ -816,6 +816,11 @@ static int xpcs_config_aneg_c37_sgmii(struct dw_xpcs *xpcs,
 	if (ret < 0)
 		return ret;
 
+	/* Clear CL37 AN complete status */
+	ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_INTR_STS, 0);
+	if (ret < 0)
+		return ret;
+
 	if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED)
 		ret = xpcs_write(xpcs, MDIO_MMD_VEND2, MII_BMCR,
 				 mdio_ctrl | BMCR_ANENABLE);
@@ -884,7 +889,7 @@ static int xpcs_config_aneg_c37_1000basex(struct dw_xpcs *xpcs,
 
 	if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED) {
 		ret = xpcs_write(xpcs, MDIO_MMD_VEND2, MII_BMCR,
-				 mdio_ctrl | BMCR_ANENABLE);
+				 mdio_ctrl | BMCR_ANENABLE | BMCR_ANRESTART);
 		if (ret < 0)
 			return ret;
 	}
@@ -1058,6 +1063,7 @@ static int xpcs_get_state_c37_sgmii(struct dw_xpcs *xpcs,
 
 	/* Reset link_state */
 	state->link = false;
+	state->an_complete = false;
 	state->speed = SPEED_UNKNOWN;
 	state->duplex = DUPLEX_UNKNOWN;
 	state->pause = 0;
@@ -1069,6 +1075,8 @@ static int xpcs_get_state_c37_sgmii(struct dw_xpcs *xpcs,
 	if (ret < 0)
 		return ret;
 
+	state->an_complete = ret & DW_VR_MII_AN_STS_C37_ANCMPLT_INTR;
+
 	if (ret & DW_VR_MII_C37_ANSGM_SP_LNKSTS) {
 		int speed_value;
 
@@ -1086,7 +1094,24 @@ static int xpcs_get_state_c37_sgmii(struct dw_xpcs *xpcs,
 			state->duplex = DUPLEX_FULL;
 		else
 			state->duplex = DUPLEX_HALF;
-	} else if (ret == DW_VR_MII_AN_STS_C37_ANCMPLT_INTR) {
+
+		return 0;
+	}
+
+	/* Clear AN complete status or interrupt */
+	if (state->an_complete)
+		xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_INTR_STS, 0);
+
+	if (xpcs->info.pma != WX_TXGBE_XPCS_PMA_10G_ID) {
+		/* If the link down, restart Auto-Negotiation */
+		if (state->an_complete)
+			xpcs_modify(xpcs, MDIO_MMD_VEND2, MII_BMCR, BMCR_ANRESTART,
+				    BMCR_ANRESTART);
+
+		return 0;
+	}
+
+	if (ret == DW_VR_MII_AN_STS_C37_ANCMPLT_INTR) {
 		int speed, duplex;
 
 		state->link = true;
@@ -1112,7 +1137,7 @@ static int xpcs_get_state_c37_sgmii(struct dw_xpcs *xpcs,
 		else if (duplex & ADVERTISE_1000XHALF)
 			state->duplex = DUPLEX_HALF;
 
-		xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_INTR_STS, 0);
+		return 0;
 	}
 
 	return 0;
-- 
2.47.3


WARNING: multiple messages have this Message-ID (diff)
From: Coia Prant <coiaprant@gmail.com>
To: kuba@kernel.org, davem@davemloft.net, edumazet@google.com,
	pabeni@redhat.com, andrew+netdev@lunn.ch, robh@kernel.org,
	krzk+dt@kernel.org, heiko@sntech.de
Cc: netdev@vger.kernel.org, linux-rockchip@lists.infradead.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-phy@lists.infradead.org, Coia Prant <coiaprant@gmail.com>
Subject: [RFC PATCH 06/10] net: pcs: xpcs: improve SGMII AN state handling for Rockchip RK3568
Date: Wed, 15 Jul 2026 03:08:34 +0800	[thread overview]
Message-ID: <20260714191341.690906-7-coiaprant@gmail.com> (raw)
In-Reply-To: <20260714191341.690906-1-coiaprant@gmail.com>

Commit 2a22b7ae2fa3 ("net: pcs: xpcs: adapt Wangxun NICs for SGMII mode")
added support for reading CL37_ANCMPLT_INTR and then reading BMCR for
speed/duplex.  This may work on Wangxun hardware but not on RK3568.

On RK3568, reading BMCR returns a fixed value (HW Reset Value or Write
Manual) instead of the negotiated result, so the correct speed/duplex
must be read from CL37_ANSGM_STS.  Also, when the link is down,
CL37_ANCMPLT_INTR stays set and the PCS does not restart AN automatically
when the PHY link returns, so an explicit AN restart via BMCR_ANRESTART
is needed.

Modify xpcs_get_state_c37_sgmii() to check CL37_ANSGM_STS for link
status first.  If the link is up, report the state.  If AN is complete
(CL37_ANCMPLT_INTR set), clear the interrupt and restart AN for
non-Wangxun platforms.  The original Wangxun-specific path is kept
unchanged unless we confirm it's a bug not a feature.

Also clear CL37 AN complete status in xpcs_config_aneg_c37_sgmii()
before starting AN to ensure a clean initial state.

Fixes: 2a22b7ae2fa3 ("net: pcs: xpcs: adapt Wangxun NICs for SGMII mode")
Signed-off-by: Coia Prant <coiaprant@gmail.com>
---
 drivers/net/pcs/pcs-xpcs.c | 31 ++++++++++++++++++++++++++++---
 1 file changed, 28 insertions(+), 3 deletions(-)

diff --git a/drivers/net/pcs/pcs-xpcs.c b/drivers/net/pcs/pcs-xpcs.c
index e69fa2f0a0e8d..cf370ba247cac 100644
--- a/drivers/net/pcs/pcs-xpcs.c
+++ b/drivers/net/pcs/pcs-xpcs.c
@@ -816,6 +816,11 @@ static int xpcs_config_aneg_c37_sgmii(struct dw_xpcs *xpcs,
 	if (ret < 0)
 		return ret;
 
+	/* Clear CL37 AN complete status */
+	ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_INTR_STS, 0);
+	if (ret < 0)
+		return ret;
+
 	if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED)
 		ret = xpcs_write(xpcs, MDIO_MMD_VEND2, MII_BMCR,
 				 mdio_ctrl | BMCR_ANENABLE);
@@ -884,7 +889,7 @@ static int xpcs_config_aneg_c37_1000basex(struct dw_xpcs *xpcs,
 
 	if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED) {
 		ret = xpcs_write(xpcs, MDIO_MMD_VEND2, MII_BMCR,
-				 mdio_ctrl | BMCR_ANENABLE);
+				 mdio_ctrl | BMCR_ANENABLE | BMCR_ANRESTART);
 		if (ret < 0)
 			return ret;
 	}
@@ -1058,6 +1063,7 @@ static int xpcs_get_state_c37_sgmii(struct dw_xpcs *xpcs,
 
 	/* Reset link_state */
 	state->link = false;
+	state->an_complete = false;
 	state->speed = SPEED_UNKNOWN;
 	state->duplex = DUPLEX_UNKNOWN;
 	state->pause = 0;
@@ -1069,6 +1075,8 @@ static int xpcs_get_state_c37_sgmii(struct dw_xpcs *xpcs,
 	if (ret < 0)
 		return ret;
 
+	state->an_complete = ret & DW_VR_MII_AN_STS_C37_ANCMPLT_INTR;
+
 	if (ret & DW_VR_MII_C37_ANSGM_SP_LNKSTS) {
 		int speed_value;
 
@@ -1086,7 +1094,24 @@ static int xpcs_get_state_c37_sgmii(struct dw_xpcs *xpcs,
 			state->duplex = DUPLEX_FULL;
 		else
 			state->duplex = DUPLEX_HALF;
-	} else if (ret == DW_VR_MII_AN_STS_C37_ANCMPLT_INTR) {
+
+		return 0;
+	}
+
+	/* Clear AN complete status or interrupt */
+	if (state->an_complete)
+		xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_INTR_STS, 0);
+
+	if (xpcs->info.pma != WX_TXGBE_XPCS_PMA_10G_ID) {
+		/* If the link down, restart Auto-Negotiation */
+		if (state->an_complete)
+			xpcs_modify(xpcs, MDIO_MMD_VEND2, MII_BMCR, BMCR_ANRESTART,
+				    BMCR_ANRESTART);
+
+		return 0;
+	}
+
+	if (ret == DW_VR_MII_AN_STS_C37_ANCMPLT_INTR) {
 		int speed, duplex;
 
 		state->link = true;
@@ -1112,7 +1137,7 @@ static int xpcs_get_state_c37_sgmii(struct dw_xpcs *xpcs,
 		else if (duplex & ADVERTISE_1000XHALF)
 			state->duplex = DUPLEX_HALF;
 
-		xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_INTR_STS, 0);
+		return 0;
 	}
 
 	return 0;
-- 
2.47.3


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

  parent reply	other threads:[~2026-07-14 19:14 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-14 19:08 [RFC PATCH 00/10] net-next: add basic support for RK3568 XPCS Coia Prant
2026-07-14 19:08 ` Coia Prant
2026-07-14 19:08 ` Coia Prant
2026-07-14 19:08 ` [RFC PATCH 01/10] net: stmmac: move XPCS lifetime management to platform drivers Coia Prant
2026-07-14 19:08   ` Coia Prant
2026-07-14 19:08   ` Coia Prant
2026-07-14 19:08 ` [RFC PATCH 02/10] dt-bindings: phy: rockchip: naneng-combphy: add rockchip,sgmii-mac-sel property Coia Prant
2026-07-14 19:08   ` Coia Prant
2026-07-14 19:08   ` Coia Prant
2026-07-14 19:08 ` [RFC PATCH 03/10] phy: rockchip: naneng-combphy: add SGMII MAC selection for RK3568 Coia Prant
2026-07-14 19:08   ` Coia Prant
2026-07-14 19:08   ` Coia Prant
2026-07-14 19:08 ` [RFC PATCH 04/10] dt-bindings: net: pcs: add rockchip,rk3568-xpcs binding Coia Prant
2026-07-14 19:08   ` Coia Prant
2026-07-14 19:08   ` Coia Prant
2026-07-14 19:08 ` [RFC PATCH 05/10] arm64: dts: rockchip: rk3568: add XPCS and fixed-clock nodes Coia Prant
2026-07-14 19:08   ` Coia Prant
2026-07-14 19:08   ` Coia Prant
2026-07-14 19:08 ` Coia Prant [this message]
2026-07-14 19:08   ` [RFC PATCH 06/10] net: pcs: xpcs: improve SGMII AN state handling for Rockchip RK3568 Coia Prant
2026-07-14 19:08   ` Coia Prant
2026-07-14 22:44   ` Andrew Lunn
2026-07-14 22:44     ` Andrew Lunn
2026-07-14 22:44     ` Andrew Lunn
2026-07-14 23:05     ` Coia Prant
2026-07-14 23:05       ` Coia Prant
2026-07-14 23:05       ` Coia Prant
2026-07-14 19:08 ` [RFC PATCH 07/10] net: pcs: xpcs: add Rockchip RK3568 platform glue driver Coia Prant
2026-07-14 19:08   ` Coia Prant
2026-07-14 19:08   ` Coia Prant
2026-07-14 19:08 ` [RFC PATCH 08/10] net: stmmac: dwmac-rk: add SGMII support for RK3568 Coia Prant
2026-07-14 19:08   ` Coia Prant
2026-07-14 19:08   ` Coia Prant
2026-07-14 19:08 ` [RFC PATCH 09/10] arm64: dts: rockchip: rk3568-photonicat: enable SGMII LAN port Coia Prant
2026-07-14 19:08   ` Coia Prant
2026-07-14 19:08   ` Coia Prant
2026-07-14 19:08 ` [RFC PATCH 10/10] MAINTAINERS: add entry for Rockchip XPCS driver Coia Prant
2026-07-14 19:08   ` Coia Prant
2026-07-14 19:08   ` Coia Prant

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260714191341.690906-7-coiaprant@gmail.com \
    --to=coiaprant@gmail.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=heiko@sntech.de \
    --cc=krzk+dt@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.