From: Michael Opdenacker <michael.opdenacker@rootcommit.com>
To: u-boot@lists.denx.de
Cc: Wei Fu <wefu@redhat.com>, Yixun Lan <dlan@gentoo.org>,
Tom Rini <trini@konsulko.com>,
Michael Opdenacker <michael.opdenacker@rootcommit.com>
Subject: [PATCH] doc: thead: lpi4a: detail how to enable fastboot
Date: Wed, 15 Jul 2026 17:04:04 +0200 [thread overview]
Message-ID: <20260715-improve-lpi4a-doc-v1-1-4cc045eb59bc@rootcommit.com> (raw)
Add that the "BOOT" button must be used
to switch the board to fastboot mode.
Signed-off-by: Michael Opdenacker <michael.opdenacker@rootcommit.com>
---
doc/board/thead/lpi4a.rst | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/doc/board/thead/lpi4a.rst b/doc/board/thead/lpi4a.rst
index acd7ac2698d..3920efcd710 100644
--- a/doc/board/thead/lpi4a.rst
+++ b/doc/board/thead/lpi4a.rst
@@ -91,8 +91,10 @@ OpenSBI firmware and proper U-Boot.
Booting
~~~~~~~
-u-boot-with-spl.bin should be loaded to SRAM through fastboot. Connect
-the board to computer with Type-C cable and run
+u-boot-with-spl.bin should be loaded to SRAM through fastboot.
+
+To put the board in fastboot mode, press and hold the ``BOOT`` button,
+connect the board to the computer with a Type-C cable, release ``BOOT`` and run:
.. code-block:: bash
---
base-commit: 8dbe57ba648648c4897717cebbc4505a8e0a8c23
change-id: 20260715-improve-lpi4a-doc-feed8191d37c
Best regards,
--
Michael Opdenacker <michael.opdenacker@rootcommit.com>
reply other threads:[~2026-07-15 15:04 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260715-improve-lpi4a-doc-v1-1-4cc045eb59bc@rootcommit.com \
--to=michael.opdenacker@rootcommit.com \
--cc=dlan@gentoo.org \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=wefu@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.