* [PATCH] doc: thead: lpi4a: detail how to enable fastboot
@ 2026-07-15 15:04 Michael Opdenacker
0 siblings, 0 replies; only message in thread
From: Michael Opdenacker @ 2026-07-15 15:04 UTC (permalink / raw)
To: u-boot; +Cc: Wei Fu, Yixun Lan, Tom Rini, Michael Opdenacker
Add that the "BOOT" button must be used
to switch the board to fastboot mode.
Signed-off-by: Michael Opdenacker <michael.opdenacker@rootcommit.com>
---
doc/board/thead/lpi4a.rst | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/doc/board/thead/lpi4a.rst b/doc/board/thead/lpi4a.rst
index acd7ac2698d..3920efcd710 100644
--- a/doc/board/thead/lpi4a.rst
+++ b/doc/board/thead/lpi4a.rst
@@ -91,8 +91,10 @@ OpenSBI firmware and proper U-Boot.
Booting
~~~~~~~
-u-boot-with-spl.bin should be loaded to SRAM through fastboot. Connect
-the board to computer with Type-C cable and run
+u-boot-with-spl.bin should be loaded to SRAM through fastboot.
+
+To put the board in fastboot mode, press and hold the ``BOOT`` button,
+connect the board to the computer with a Type-C cable, release ``BOOT`` and run:
.. code-block:: bash
---
base-commit: 8dbe57ba648648c4897717cebbc4505a8e0a8c23
change-id: 20260715-improve-lpi4a-doc-feed8191d37c
Best regards,
--
Michael Opdenacker <michael.opdenacker@rootcommit.com>
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2026-07-15 15:04 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-07-15 15:04 [PATCH] doc: thead: lpi4a: detail how to enable fastboot Michael Opdenacker
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.