From: Anders Roxell <anders.roxell@linaro.org>
To: u-boot@lists.denx.de, marex@denx.de
Cc: mkorpershoek@kernel.org, ilias.apalodimas@linaro.org,
trini@konsulko.com, michal.simek@amd.com, alchark@flipper.net,
jerome.forissier@arm.com,
Jerome Forissier <jerome.forissier@linaro.org>,
Jens Wiklander <jens.wiklander@linaro.org>,
Anders Roxell <anders.roxell@linaro.org>,
Bin Meng <bmeng.cn@gmail.com>
Subject: [PATCH v5 61/75] usb: host: re-import xhci-ext-caps.h from kernel v6.16
Date: Thu, 16 Jul 2026 15:42:31 +0200 [thread overview]
Message-ID: <20260716134305.614278-62-anders.roxell@linaro.org> (raw)
In-Reply-To: <20260716134305.614278-1-anders.roxell@linaro.org>
From: Jerome Forissier <jerome.forissier@linaro.org>
Import drivers/usb/host/xhci-ext-caps.h from Linux v6.16. The file
is needed by the updated DWC3 code.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
---
drivers/usb/host/xhci-ext-caps.h | 158 +++++++++++++++++++++++++++++++
1 file changed, 158 insertions(+)
create mode 100644 drivers/usb/host/xhci-ext-caps.h
diff --git a/drivers/usb/host/xhci-ext-caps.h b/drivers/usb/host/xhci-ext-caps.h
new file mode 100644
index 000000000000..c93bcf4f4f7d
--- /dev/null
+++ b/drivers/usb/host/xhci-ext-caps.h
@@ -0,0 +1,158 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Imported from Linux v6.16 */
+/*
+ * xHCI host controller driver
+ *
+ * Copyright (C) 2008 Intel Corp.
+ *
+ * Author: Sarah Sharp
+ * Some code borrowed from the Linux EHCI driver.
+ */
+
+/* HC should halt within 16 ms, but use 32 ms as some hosts take longer */
+#define XHCI_MAX_HALT_USEC (32 * 1000)
+/* HC not running - set to 1 when run/stop bit is cleared. */
+#define XHCI_STS_HALT (1<<0)
+
+/* HCCPARAMS offset from PCI base address */
+#define XHCI_HCC_PARAMS_OFFSET 0x10
+/* HCCPARAMS contains the first extended capability pointer */
+#define XHCI_HCC_EXT_CAPS(p) (((p)>>16)&0xffff)
+
+/* Command and Status registers offset from the Operational Registers address */
+#define XHCI_CMD_OFFSET 0x00
+#define XHCI_STS_OFFSET 0x04
+
+#define XHCI_MAX_EXT_CAPS 50
+
+/* Capability Register */
+/* bits 7:0 - how long is the Capabilities register */
+#define XHCI_HC_LENGTH(p) (((p)>>00)&0x00ff)
+
+/* Extended capability register fields */
+#define XHCI_EXT_CAPS_ID(p) (((p)>>0)&0xff)
+#define XHCI_EXT_CAPS_NEXT(p) (((p)>>8)&0xff)
+#define XHCI_EXT_CAPS_VAL(p) ((p)>>16)
+/* Extended capability IDs - ID 0 reserved */
+#define XHCI_EXT_CAPS_LEGACY 1
+#define XHCI_EXT_CAPS_PROTOCOL 2
+#define XHCI_EXT_CAPS_PM 3
+#define XHCI_EXT_CAPS_VIRT 4
+#define XHCI_EXT_CAPS_ROUTE 5
+/* IDs 6-9 reserved */
+#define XHCI_EXT_CAPS_DEBUG 10
+/* Vendor caps */
+#define XHCI_EXT_CAPS_VENDOR_INTEL 192
+#define XHCI_EXT_CAPS_INTEL_SPR_SHADOW 206
+/* USB Legacy Support Capability - section 7.1.1 */
+#define XHCI_HC_BIOS_OWNED (1 << 16)
+#define XHCI_HC_OS_OWNED (1 << 24)
+
+/* USB Legacy Support Capability - section 7.1.1 */
+/* Add this offset, plus the value of xECP in HCCPARAMS to the base address */
+#define XHCI_LEGACY_SUPPORT_OFFSET (0x00)
+
+/* USB Legacy Support Control and Status Register - section 7.1.2 */
+/* Add this offset, plus the value of xECP in HCCPARAMS to the base address */
+#define XHCI_LEGACY_CONTROL_OFFSET (0x04)
+/* bits 1:3, 5:12, and 17:19 need to be preserved; bits 21:28 should be zero */
+#define XHCI_LEGACY_DISABLE_SMI ((0x7 << 1) + (0xff << 5) + (0x7 << 17))
+#define XHCI_LEGACY_SMI_EVENTS (0x7 << 29)
+
+/* USB 2.0 xHCI 0.96 L1C capability - section 7.2.2.1.3.2 */
+#define XHCI_L1C (1 << 16)
+
+/* USB 2.0 xHCI 1.0 hardware LMP capability - section 7.2.2.1.3.2 */
+#define XHCI_HLC (1 << 19)
+#define XHCI_BLC (1 << 20)
+
+/* Intel SPR shadow capability */
+#define XHCI_INTEL_SPR_ESS_PORT_OFFSET 0x8ac4 /* SuperSpeed port control */
+#define XHCI_INTEL_SPR_TUNEN BIT(4) /* Tunnel mode enabled */
+
+/* command register values to disable interrupts and halt the HC */
+/* start/stop HC execution - do not write unless HC is halted*/
+#define XHCI_CMD_RUN (1 << 0)
+/* Event Interrupt Enable - get irq when EINT bit is set in USBSTS register */
+#define XHCI_CMD_EIE (1 << 2)
+/* Host System Error Interrupt Enable - get irq when HSEIE bit set in USBSTS */
+#define XHCI_CMD_HSEIE (1 << 3)
+/* Enable Wrap Event - '1' means xHC generates an event when MFINDEX wraps. */
+#define XHCI_CMD_EWE (1 << 10)
+
+#define XHCI_IRQS (XHCI_CMD_EIE | XHCI_CMD_HSEIE | XHCI_CMD_EWE)
+
+/* true: Controller Not Ready to accept doorbell or op reg writes after reset */
+#define XHCI_STS_CNR (1 << 11)
+
+/**
+ * struct xhci_protocol_caps
+ * @revision: major revision, minor revision, capability ID,
+ * and next capability pointer.
+ * @name_string: Four ASCII characters to say which spec this xHC
+ * follows, typically "USB ".
+ * @port_info: Port offset, count, and protocol-defined information.
+ */
+struct xhci_protocol_caps {
+ u32 revision;
+ u32 name_string;
+ u32 port_info;
+};
+
+#define XHCI_EXT_PORT_MAJOR(x) (((x) >> 24) & 0xff)
+#define XHCI_EXT_PORT_MINOR(x) (((x) >> 16) & 0xff)
+#define XHCI_EXT_PORT_PSIC(x) (((x) >> 28) & 0x0f)
+#define XHCI_EXT_PORT_OFF(x) ((x) & 0xff)
+#define XHCI_EXT_PORT_COUNT(x) (((x) >> 8) & 0xff)
+
+#define XHCI_EXT_PORT_PSIV(x) (((x) >> 0) & 0x0f)
+#define XHCI_EXT_PORT_PSIE(x) (((x) >> 4) & 0x03)
+#define XHCI_EXT_PORT_PLT(x) (((x) >> 6) & 0x03)
+#define XHCI_EXT_PORT_PFD(x) (((x) >> 8) & 0x01)
+#define XHCI_EXT_PORT_LP(x) (((x) >> 14) & 0x03)
+#define XHCI_EXT_PORT_PSIM(x) (((x) >> 16) & 0xffff)
+
+#include <linux/io.h>
+
+/**
+ * Find the offset of the extended capabilities with capability ID id.
+ *
+ * @base PCI MMIO registers base address.
+ * @start address at which to start looking, (0 or HCC_PARAMS to start at
+ * beginning of list)
+ * @id Extended capability ID to search for, or 0 for the next
+ * capability
+ *
+ * Returns the offset of the next matching extended capability structure.
+ * Some capabilities can occur several times, e.g., the XHCI_EXT_CAPS_PROTOCOL,
+ * and this provides a way to find them all.
+ */
+
+static inline int xhci_find_next_ext_cap(void __iomem *base, u32 start, int id)
+{
+ u32 val;
+ u32 next;
+ u32 offset;
+
+ offset = start;
+ if (!start || start == XHCI_HCC_PARAMS_OFFSET) {
+ val = readl(base + XHCI_HCC_PARAMS_OFFSET);
+ if (val == ~0)
+ return 0;
+ offset = XHCI_HCC_EXT_CAPS(val) << 2;
+ if (!offset)
+ return 0;
+ }
+ do {
+ val = readl(base + offset);
+ if (val == ~0)
+ return 0;
+ if (offset != start && (id == 0 || XHCI_EXT_CAPS_ID(val) == id))
+ return offset;
+
+ next = XHCI_EXT_CAPS_NEXT(val);
+ offset += next << 2;
+ } while (next);
+
+ return 0;
+}
--
2.53.0
next prev parent reply other threads:[~2026-07-16 16:19 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-16 13:41 [PATCH v5 00/75] usb: dwc3: sync code with Linux v6.16 Anders Roxell
2026-07-16 13:41 ` [PATCH v5 01/75] usb: dwc3: restore to original v3.19-rc1 kernel import Anders Roxell
2026-07-16 13:41 ` [PATCH v5 02/75] usb: dwc3: import from kernel v3.19 Anders Roxell
2026-07-16 13:41 ` [PATCH v5 03/75] usb: dwc3: import from kernel v4.0 Anders Roxell
2026-07-16 13:41 ` [PATCH v5 04/75] usb: dwc3: import from kernel v4.1 Anders Roxell
2026-07-16 13:41 ` [PATCH v5 05/75] usb: dwc3: import from kernel v4.2 Anders Roxell
2026-07-16 13:41 ` [PATCH v5 06/75] usb: dwc3: import from kernel v4.3 Anders Roxell
2026-07-16 13:41 ` [PATCH v5 07/75] usb: dwc3: import from kernel v4.4 Anders Roxell
2026-07-16 13:41 ` [PATCH v5 08/75] usb: dwc3: import from kernel v4.5 Anders Roxell
2026-07-16 13:41 ` [PATCH v5 09/75] usb: dwc3: import from kernel v4.6 Anders Roxell
2026-07-16 13:41 ` [PATCH v5 10/75] usb: dwc3: import from kernel v4.7 Anders Roxell
2026-07-16 13:41 ` [PATCH v5 11/75] usb: dwc3: import from kernel v4.8 Anders Roxell
2026-07-16 13:41 ` [PATCH v5 12/75] usb: dwc3: import from kernel v4.9 Anders Roxell
2026-07-16 13:41 ` [PATCH v5 13/75] usb: dwc3: import from kernel v4.10 Anders Roxell
2026-07-16 13:41 ` [PATCH v5 14/75] usb: dwc3: import from kernel v4.11 Anders Roxell
2026-07-16 13:41 ` [PATCH v5 15/75] usb: dwc3: import from kernel v4.12 Anders Roxell
2026-07-16 13:41 ` [PATCH v5 16/75] usb: dwc3: import from kernel v4.13 Anders Roxell
2026-07-16 13:41 ` [PATCH v5 17/75] usb: dwc3: import from kernel v4.14 Anders Roxell
2026-07-16 13:41 ` [PATCH v5 18/75] usb: dwc3: import from kernel v4.15 Anders Roxell
2026-07-16 13:41 ` [PATCH v5 19/75] usb: dwc3: import from kernel v4.16 Anders Roxell
2026-07-16 13:41 ` [PATCH v5 20/75] usb: dwc3: import from kernel v4.17 Anders Roxell
2026-07-16 13:41 ` [PATCH v5 21/75] usb: dwc3: import from kernel v4.18 Anders Roxell
2026-07-16 13:41 ` [PATCH v5 22/75] usb: dwc3: import from kernel v4.19 Anders Roxell
2026-07-16 13:41 ` [PATCH v5 23/75] usb: dwc3: import from kernel v4.20 Anders Roxell
2026-07-16 13:41 ` [PATCH v5 24/75] usb: dwc3: import from kernel v5.0 Anders Roxell
2026-07-16 13:41 ` [PATCH v5 25/75] usb: dwc3: import from kernel v5.1 Anders Roxell
2026-07-16 13:41 ` [PATCH v5 26/75] usb: dwc3: import from kernel v5.2 Anders Roxell
2026-07-16 13:41 ` [PATCH v5 27/75] usb: dwc3: import from kernel v5.3 Anders Roxell
2026-07-16 13:41 ` [PATCH v5 28/75] usb: dwc3: import from kernel v5.4 Anders Roxell
2026-07-16 13:41 ` [PATCH v5 29/75] usb: dwc3: import from kernel v5.5 Anders Roxell
2026-07-16 13:42 ` [PATCH v5 30/75] usb: dwc3: import from kernel v5.6 Anders Roxell
2026-07-16 13:42 ` [PATCH v5 31/75] usb: dwc3: import from kernel v5.7 Anders Roxell
2026-07-16 13:42 ` [PATCH v5 32/75] usb: dwc3: import from kernel v5.8 Anders Roxell
2026-07-16 13:42 ` [PATCH v5 33/75] usb: dwc3: import from kernel v5.9 Anders Roxell
2026-07-16 13:42 ` [PATCH v5 34/75] usb: dwc3: import from kernel v5.10 Anders Roxell
2026-07-16 13:42 ` [PATCH v5 35/75] usb: dwc3: import from kernel v5.11 Anders Roxell
2026-07-16 13:42 ` [PATCH v5 36/75] usb: dwc3: import from kernel v5.12 Anders Roxell
2026-07-16 13:42 ` [PATCH v5 37/75] usb: dwc3: import from kernel v5.13 Anders Roxell
2026-07-16 13:42 ` [PATCH v5 38/75] usb: dwc3: import from kernel v5.14 Anders Roxell
2026-07-16 13:42 ` [PATCH v5 39/75] usb: dwc3: import from kernel v5.15 Anders Roxell
2026-07-16 13:42 ` [PATCH v5 40/75] usb: dwc3: import from kernel v5.16 Anders Roxell
2026-07-16 13:42 ` [PATCH v5 41/75] usb: dwc3: import from kernel v5.17 Anders Roxell
2026-07-16 13:42 ` [PATCH v5 42/75] usb: dwc3: import from kernel v5.18 Anders Roxell
2026-07-16 13:42 ` [PATCH v5 43/75] usb: dwc3: import from kernel v5.19 Anders Roxell
2026-07-16 13:42 ` [PATCH v5 44/75] usb: dwc3: import from kernel v6.0 Anders Roxell
2026-07-16 13:42 ` [PATCH v5 45/75] usb: dwc3: import from kernel v6.1 Anders Roxell
2026-07-16 13:42 ` [PATCH v5 46/75] usb: dwc3: import from kernel v6.2 Anders Roxell
2026-07-16 13:42 ` [PATCH v5 47/75] usb: dwc3: import from kernel v6.3 Anders Roxell
2026-07-16 13:42 ` [PATCH v5 48/75] usb: dwc3: import from kernel v6.4 Anders Roxell
2026-07-16 13:42 ` [PATCH v5 49/75] usb: dwc3: import from kernel v6.5 Anders Roxell
2026-07-16 13:42 ` [PATCH v5 50/75] usb: dwc3: import from kernel v6.6 Anders Roxell
2026-07-16 13:42 ` [PATCH v5 51/75] usb: dwc3: import from kernel v6.7 Anders Roxell
2026-07-16 13:42 ` [PATCH v5 52/75] usb: dwc3: import from kernel v6.8 Anders Roxell
2026-07-16 13:42 ` [PATCH v5 53/75] usb: dwc3: import from kernel v6.9 Anders Roxell
2026-07-16 13:42 ` [PATCH v5 54/75] usb: dwc3: import from kernel v6.10 Anders Roxell
2026-07-16 13:42 ` [PATCH v5 55/75] usb: dwc3: import from kernel v6.11 Anders Roxell
2026-07-16 13:42 ` [PATCH v5 56/75] usb: dwc3: import from kernel v6.12 Anders Roxell
2026-07-16 13:42 ` [PATCH v5 57/75] usb: dwc3: import from kernel v6.13 Anders Roxell
2026-07-16 13:42 ` [PATCH v5 58/75] usb: dwc3: import from kernel v6.14 Anders Roxell
2026-07-16 13:42 ` [PATCH v5 59/75] usb: dwc3: import from kernel v6.15 Anders Roxell
2026-07-16 13:42 ` [PATCH v5 60/75] usb: dwc3: import from kernel v6.16 Anders Roxell
2026-07-16 13:42 ` Anders Roxell [this message]
2026-07-16 13:42 ` [PATCH v5 62/75] usb: gadget: re-import epautoconf.c " Anders Roxell
2026-07-16 13:42 ` [PATCH v5 63/75] usb: udc: re-import udc-core.c " Anders Roxell
2026-07-16 13:42 ` [PATCH v5 64/75] usb: add helpers needed by the resynced DWC3 code Anders Roxell
2026-07-16 13:42 ` [PATCH v5 65/75] usb: gadget: trim the gadget API after the resync Anders Roxell
2026-07-16 13:42 ` [PATCH v5 66/75] usb: gadget: udc: make udc-core build in u-boot Anders Roxell
2026-07-16 13:42 ` [PATCH v5 67/75] usb: dwc3: make the core driver " Anders Roxell
2026-07-16 13:42 ` [PATCH v5 68/75] usb: dwc3: make gadget and ep0 " Anders Roxell
2026-07-16 13:42 ` [PATCH v5 69/75] usb: dwc3: make the am62 glue " Anders Roxell
2026-07-16 13:42 ` [PATCH v5 70/75] usb: gadget: ci_udc: drop code we do not use Anders Roxell
2026-07-16 13:42 ` [PATCH v5 71/75] usb: gadget: dwc2_udc_otg: fix up after the resync Anders Roxell
2026-07-16 13:42 ` [PATCH v5 72/75] usb: gadget: fix up the function drivers " Anders Roxell
2026-07-16 13:42 ` [PATCH v5 73/75] usb: gadget: fix up the last UDC " Anders Roxell
2026-07-16 13:42 ` [PATCH v5 74/75] usb: fix up musb-new and mtu3 " Anders Roxell
2026-07-16 13:42 ` [PATCH v5 75/75] usb: host: fix up xhci and cdns3 " Anders Roxell
2026-07-16 19:22 ` [PATCH v5 00/75] usb: dwc3: sync code with Linux v6.16 Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260716134305.614278-62-anders.roxell@linaro.org \
--to=anders.roxell@linaro.org \
--cc=alchark@flipper.net \
--cc=bmeng.cn@gmail.com \
--cc=ilias.apalodimas@linaro.org \
--cc=jens.wiklander@linaro.org \
--cc=jerome.forissier@arm.com \
--cc=jerome.forissier@linaro.org \
--cc=marex@denx.de \
--cc=michal.simek@amd.com \
--cc=mkorpershoek@kernel.org \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.