[PATCH i-g-t 0/2] tests/intel/kms_pm_dc: Add test to validate YUV420 with DC3CO

[PATCH i-g-t 0/2] tests/intel/kms_pm_dc: Add test to validate YUV420 with DC3CO

[Jeevan B]

Fix PSR/PR entry timeout in dynamic subtests and
Add test to validate YUV420 with DC3CO

Signed-off-by: Jeevan B <jeevan.b@intel.com>

Jeevan B (2):
  tests/intel/kms_pm_dc: Fix PSR/PR entry timeout in dynamic subtests
  tests/intel/kms_pm_dc: Add test to validate YUV420 with DC3CO

 tests/intel/kms_pm_dc.c | 92 ++++++++++++++++++++++++-----------------
 1 file changed, 55 insertions(+), 37 deletions(-)

-- 
2.43.0

[PATCH i-g-t 1/2] tests/intel/kms_pm_dc: Fix PSR/PR entry timeout in dynamic subtests

[Jeevan B]

After cleanup_dc3co_fbs disables the primary plane, later dynamic
subtests can wait for PSR2/Panel Replay entry without any valid plane
content, causing entry checks to time out.

Add commit_initial_dc3co_frame and call it before setup_dc3co in
all DC3CO test paths to ensure a valid framebuffer is present when
PSR2/Panel Replay entry is verified.

Signed-off-by: Jeevan B <jeevan.b@intel.com>
---
 tests/intel/kms_pm_dc.c | 22 ++++++++++++++++++----
 1 file changed, 18 insertions(+), 4 deletions(-)

diff --git a/tests/intel/kms_pm_dc.c b/tests/intel/kms_pm_dc.c
index ef53c5f96..018def5e4 100644
--- a/tests/intel/kms_pm_dc.c
+++ b/tests/intel/kms_pm_dc.c
@@ -315,6 +315,16 @@ static void setup_videoplayback(data_t *data)
 	create_color_fb(data, &data->fb_rgr, red_green_red);
 }
 
+static void commit_initial_dc3co_frame(data_t *data)
+{
+	igt_plane_t *primary;
+
+	primary = igt_output_get_plane_type(data->output,
+					    DRM_PLANE_TYPE_PRIMARY);
+	igt_plane_set_fb(primary, &data->fb_rgb);
+	igt_display_commit(&data->display);
+}
+
 static void check_dc3co_with_videoplayback_like_load(data_t *data)
 {
 	igt_plane_t *primary;
@@ -356,8 +366,9 @@ static void test_dc3co_vpb_simulation(data_t *data)
 {
 	igt_require_dc_counter(data->debugfs_fd, IGT_INTEL_CHECK_DC3CO);
 	setup_output(data);
-	setup_dc3co(data);
 	setup_videoplayback(data);
+	commit_initial_dc3co_frame(data);
+	setup_dc3co(data);
 	check_dc3co_with_videoplayback_like_load(data);
 	cleanup_dc3co_fbs(data);
 }
@@ -436,8 +447,9 @@ static void test_dc3co_framedrop(data_t *data)
 {
 	igt_require_dc_counter(data->debugfs_fd, IGT_INTEL_CHECK_DC3CO);
 	setup_output(data);
-	setup_dc3co(data);
 	setup_videoplayback(data);
+	commit_initial_dc3co_frame(data);
+	setup_dc3co(data);
 	detect_dc3co_framedrop(data);
 	cleanup_dc3co_fbs(data);
 }
@@ -493,8 +505,9 @@ static void test_dc3co_vpb_framegap(data_t *data)
 {
 	igt_require_dc_counter(data->debugfs_fd, IGT_INTEL_CHECK_DC3CO);
 	setup_output(data);
-	setup_dc3co(data);
 	setup_videoplayback(data);
+	commit_initial_dc3co_frame(data);
+	setup_dc3co(data);
 	check_dc3co_with_framegap_load(data);
 	cleanup_dc3co_fbs(data);
 }
@@ -706,9 +719,10 @@ static void test_dc3co_after_dc6(data_t *data)
 	igt_require_dc_counter(data->debugfs_fd, IGT_INTEL_CHECK_DC6);
 
 	setup_output(data);
+	setup_videoplayback(data);
+	commit_initial_dc3co_frame(data);
 	setup_dc3co(data);
 	test_dc_state_dpms(data, IGT_INTEL_CHECK_DC6);
-	setup_videoplayback(data);
 	check_dc3co_with_videoplayback_like_load(data);
 	cleanup_dc3co_fbs(data);
 }
-- 
2.43.0

Re: FW: [PATCH i-g-t 1/2] tests/intel/kms_pm_dc: Fix PSR/PR entry timeout in dynamic subtests

[Thasleem, Mohammed]

[-- Attachment #1: Type: text/plain, Size: 3284 bytes --]


On 17-07-2026 11:28 am, Thasleem, Mohammed wrote:
> -----Original Message-----
> From: igt-dev<igt-dev-bounces@lists.freedesktop.org> On Behalf Of Jeevan B
> Sent: 17 July 2026 09:27 AM
> To:igt-dev@lists.freedesktop.org
> Cc: Dibin Moolakadan Subrahmanian<dibin.moolakadan.subrahmanian@intel.com>; Naladala, Ramanaidu<ramanaidu.naladala@intel.com>; B, Jeevan<jeevan.b@intel.com>
> Subject: [PATCH i-g-t 1/2] tests/intel/kms_pm_dc: Fix PSR/PR entry timeout in dynamic subtests

LGTM:

Reviewed-by: Mohammed Thasleem <mohammed.thasleem@intel.com>

> After cleanup_dc3co_fbs disables the primary plane, later dynamic subtests can wait for PSR2/Panel Replay entry without any valid plane content, causing entry checks to time out.
>
> Add commit_initial_dc3co_frame and call it before setup_dc3co in all DC3CO test paths to ensure a valid framebuffer is present when PSR2/Panel Replay entry is verified.
>
> Signed-off-by: Jeevan B<jeevan.b@intel.com>
> ---
>   tests/intel/kms_pm_dc.c | 22 ++++++++++++++++++----
>   1 file changed, 18 insertions(+), 4 deletions(-)
>
> diff --git a/tests/intel/kms_pm_dc.c b/tests/intel/kms_pm_dc.c index ef53c5f96..018def5e4 100644
> --- a/tests/intel/kms_pm_dc.c
> +++ b/tests/intel/kms_pm_dc.c
> @@ -315,6 +315,16 @@ static void setup_videoplayback(data_t *data)
>   	create_color_fb(data, &data->fb_rgr, red_green_red);  }
>   
> +static void commit_initial_dc3co_frame(data_t *data) {
> +	igt_plane_t *primary;
> +
> +	primary = igt_output_get_plane_type(data->output,
> +					    DRM_PLANE_TYPE_PRIMARY);
> +	igt_plane_set_fb(primary, &data->fb_rgb);
> +	igt_display_commit(&data->display);
> +}
> +
>   static void check_dc3co_with_videoplayback_like_load(data_t *data)  {
>   	igt_plane_t *primary;
> @@ -356,8 +366,9 @@ static void test_dc3co_vpb_simulation(data_t *data)  {
>   	igt_require_dc_counter(data->debugfs_fd, IGT_INTEL_CHECK_DC3CO);
>   	setup_output(data);
> -	setup_dc3co(data);
>   	setup_videoplayback(data);
> +	commit_initial_dc3co_frame(data);
> +	setup_dc3co(data);
>   	check_dc3co_with_videoplayback_like_load(data);
>   	cleanup_dc3co_fbs(data);
>   }
> @@ -436,8 +447,9 @@ static void test_dc3co_framedrop(data_t *data)  {
>   	igt_require_dc_counter(data->debugfs_fd, IGT_INTEL_CHECK_DC3CO);
>   	setup_output(data);
> -	setup_dc3co(data);
>   	setup_videoplayback(data);
> +	commit_initial_dc3co_frame(data);
> +	setup_dc3co(data);
>   	detect_dc3co_framedrop(data);
>   	cleanup_dc3co_fbs(data);
>   }
> @@ -493,8 +505,9 @@ static void test_dc3co_vpb_framegap(data_t *data)  {
>   	igt_require_dc_counter(data->debugfs_fd, IGT_INTEL_CHECK_DC3CO);
>   	setup_output(data);
> -	setup_dc3co(data);
>   	setup_videoplayback(data);
> +	commit_initial_dc3co_frame(data);
> +	setup_dc3co(data);
>   	check_dc3co_with_framegap_load(data);
>   	cleanup_dc3co_fbs(data);
>   }
> @@ -706,9 +719,10 @@ static void test_dc3co_after_dc6(data_t *data)
>   	igt_require_dc_counter(data->debugfs_fd, IGT_INTEL_CHECK_DC6);
>   
>   	setup_output(data);
> +	setup_videoplayback(data);
> +	commit_initial_dc3co_frame(data);
>   	setup_dc3co(data);
>   	test_dc_state_dpms(data, IGT_INTEL_CHECK_DC6);
> -	setup_videoplayback(data);
>   	check_dc3co_with_videoplayback_like_load(data);
>   	cleanup_dc3co_fbs(data);
>   }
> --
> 2.43.0
>

[-- Attachment #2: Type: text/html, Size: 4429 bytes --]

[PATCH i-g-t 2/2] tests/intel/kms_pm_dc: Add test to validate YUV420 with DC3CO

[Jeevan B]

Add a new validation test to ensure YUV420 works correctly when
DC3CO is enabled.

v2: Add YUV420 support for all DC3CO tests.

Signed-off-by: Jeevan B <jeevan.b@intel.com>
---
 tests/intel/kms_pm_dc.c | 70 ++++++++++++++++++++++-------------------
 1 file changed, 37 insertions(+), 33 deletions(-)

diff --git a/tests/intel/kms_pm_dc.c b/tests/intel/kms_pm_dc.c
index 018def5e4..52f0be183 100644
--- a/tests/intel/kms_pm_dc.c
+++ b/tests/intel/kms_pm_dc.c
@@ -125,16 +125,24 @@ typedef struct {
 	igt_display_t display;
 	struct igt_fb fb_white, fb_rgb, fb_rgr;
 	enum psr_mode op_psr_mode;
+	uint32_t dc3co_fb_format;
 	drmModeModeInfo *mode;
 	igt_output_t *output;
 	bool runtime_suspend_disabled;
 } data_t;
 
-struct dc3co_test_mode {
+struct dc3co_test_case {
 	enum psr_mode mode;
+	uint32_t fb_format;
 	const char *name;
 };
 
+static const struct dc3co_test_case dc3co_cases[] = {
+	{ PSR_MODE_2, DRM_FORMAT_XRGB8888, "psr2-xrgb8888" },
+	{ PSR_MODE_2, DRM_FORMAT_NV12,     "psr2-yuv420" },
+	{ PR_MODE,    DRM_FORMAT_XRGB8888, "pr-xrgb8888" },
+};
+
 static void assert_dc_counter(data_t *data, int dc_flag, uint32_t prev_dc_count);
 
 static void set_output_on_pipe_b(data_t *data)
@@ -275,7 +283,7 @@ static void create_color_fb(data_t *data, igt_fb_t *fb, color_t *fb_color)
 	fb_id = igt_create_fb(data->drm_fd,
 			      data->mode->hdisplay,
 			      data->mode->vdisplay,
-			      DRM_FORMAT_XRGB8888,
+			      data->dc3co_fb_format,
 			      DRM_FORMAT_MOD_LINEAR,
 			      fb);
 	igt_assert(fb_id);
@@ -300,6 +308,15 @@ static void assert_dc_counter_negative(data_t *data, int dc_flag, uint32_t prev_
 
 static void setup_videoplayback(data_t *data)
 {
+	igt_plane_t *primary;
+
+	primary = igt_output_get_plane_type(data->output,
+					    DRM_PLANE_TYPE_PRIMARY);
+	igt_require_f(igt_plane_has_format_mod(primary, data->dc3co_fb_format,
+					       DRM_FORMAT_MOD_LINEAR),
+					       "Primary plane does not support format %s\n",
+					       igt_format_str(data->dc3co_fb_format));
+
 	color_t red_green_blue[] = {
 		{ 1.0, 0.0, 0.0 },
 		{ 0.0, 1.0, 0.0 },
@@ -893,14 +910,10 @@ int igt_main()
 	igt_describe("In this test we make sure that system enters DC3CO "
 		     "when PSR2 or PR is active and system is in SLEEP state");
 	igt_subtest_with_dynamic("dc3co-vpb-simulation") {
-		static const struct dc3co_test_mode dc3co_modes[] = {
-			{ PSR_MODE_2, "psr2" },
-			{ PR_MODE,    "pr"   },
-		};
-
-		for (int i = 0; i < ARRAY_SIZE(dc3co_modes); i++) {
-			const char *name = dc3co_modes[i].name;
-			data.op_psr_mode = dc3co_modes[i].mode;
+		for (int i = 0; i < ARRAY_SIZE(dc3co_cases); i++) {
+			const char *name = dc3co_cases[i].name;
+			data.op_psr_mode = dc3co_cases[i].mode;
+			data.dc3co_fb_format = dc3co_cases[i].fb_format;
 
 			igt_dynamic_f("%s", name) {
 				igt_require_f(intel_display_ver(data.devid) >= 35,
@@ -919,14 +932,10 @@ int igt_main()
 	igt_describe("Validate that no frame drops occur during DC3CO entry "
 			     "while alternating framebuffers with PSR2 or Panel Replay active");
 	igt_subtest_with_dynamic("dc3co-framedrop-check") {
-		static const struct dc3co_test_mode dc3co_modes[] = {
-			{ PSR_MODE_2, "psr2" },
-			{ PR_MODE,    "pr"   },
-		};
-
-		for (int i = 0; i < ARRAY_SIZE(dc3co_modes); i++) {
-			const char *name = dc3co_modes[i].name;
-			data.op_psr_mode = dc3co_modes[i].mode;
+		for (int i = 0; i < ARRAY_SIZE(dc3co_cases); i++) {
+			const char *name = dc3co_cases[i].name;
+			data.op_psr_mode = dc3co_cases[i].mode;
+			data.dc3co_fb_format = dc3co_cases[i].fb_format;
 
 			igt_dynamic_f("%s", name) {
 				igt_require_f(intel_display_ver(data.devid) >= 35,
@@ -945,17 +954,14 @@ int igt_main()
 	igt_describe("Verify DC3CO entry is still functional after a DC6 entry "
 		     "and exit cycle");
 	igt_subtest_with_dynamic("dc3co-after-dc6") {
-		static const struct dc3co_test_mode dc3co_modes[] = {
-			{ PSR_MODE_2, "psr2" },
-			{ PR_MODE,    "pr"   },
-		};
 
 		igt_require_f(igt_pm_pc8_plus_residencies_enabled(data.msr_fd),
 			      "PC8+ residencies not supported\n");
 
-		for (int i = 0; i < ARRAY_SIZE(dc3co_modes); i++) {
-			const char *name = dc3co_modes[i].name;
-			data.op_psr_mode = dc3co_modes[i].mode;
+		for (int i = 0; i < ARRAY_SIZE(dc3co_cases); i++) {
+			const char *name = dc3co_cases[i].name;
+			data.op_psr_mode = dc3co_cases[i].mode;
+			data.dc3co_fb_format = dc3co_cases[i].fb_format;
 
 			igt_dynamic_f("%s", name) {
 				igt_require_f(intel_display_ver(data.devid) >= 35,
@@ -974,14 +980,10 @@ int igt_main()
 	igt_describe("Validate DC3CO counter increments before and after a delay "
 		     "greater than 6 frame gaps during video-like load with PSR2/PR active");
 	igt_subtest_with_dynamic("dc3co-vpb-framegap") {
-		static const struct dc3co_test_mode dc3co_modes[] = {
-			{ PSR_MODE_2, "psr2" },
-			{ PR_MODE,    "pr"   },
-		};
-
-		for (int i = 0; i < ARRAY_SIZE(dc3co_modes); i++) {
-			const char *name = dc3co_modes[i].name;
-			data.op_psr_mode = dc3co_modes[i].mode;
+		for (int i = 0; i < ARRAY_SIZE(dc3co_cases); i++) {
+			const char *name = dc3co_cases[i].name;
+			data.op_psr_mode = dc3co_cases[i].mode;
+			data.dc3co_fb_format = dc3co_cases[i].fb_format;
 
 			igt_dynamic_f("%s", name) {
 				igt_require_f(intel_display_ver(data.devid) >= 35,
@@ -1025,6 +1027,7 @@ int igt_main()
 		igt_require_f(igt_pm_pc8_plus_residencies_enabled(data.msr_fd),
 			      "PC8+ residencies not supported\n");
 		igt_require(intel_display_ver(data.devid) >= 20);
+		data.dc3co_fb_format = DRM_FORMAT_XRGB8888;
 		test_deep_pkgc_state(&data);
 	}
 
@@ -1053,6 +1056,7 @@ int igt_main()
 		igt_require(psr_sink_support(data.drm_fd, data.debugfs_fd,
 					     PSR_MODE_1, NULL));
 		data.op_psr_mode = PSR_MODE_1;
+		data.dc3co_fb_format = DRM_FORMAT_XRGB8888;
 		psr_enable(data.drm_fd, data.debugfs_fd, data.op_psr_mode, NULL);
 		igt_require(!psr_disabled_check(data.debugfs_fd));
 		test_dc5_pageflip_negative(&data, IGT_INTEL_CHECK_DC5);
-- 
2.43.0

✓ Xe.CI.BAT: success for tests/intel/kms_pm_dc: Add test to validate YUV420 with DC3CO (rev4)

[Patchwork]

[-- Attachment #1: Type: text/plain, Size: 889 bytes --]

== Series Details ==

Series: tests/intel/kms_pm_dc: Add test to validate YUV420 with DC3CO (rev4)
URL   : https://patchwork.freedesktop.org/series/169908/
State : success

== Summary ==

CI Bug Log - changes from XEIGT_9012_BAT -> XEIGTPW_15547_BAT
====================================================

Summary
-------

  **SUCCESS**

  No regressions found.

  

Participating hosts (13 -> 13)
------------------------------

  No changes in participating hosts


Changes
-------

  No changes found


Build changes
-------------

  * IGT: IGT_9012 -> IGTPW_15547

  IGTPW_15547: 15547
  IGT_9012: d94a55886c7eec82a791728d3cc1c4a6aa945281 @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git
  xe-5424-22852552aa1b7198931842ddf824af4dd09e2814: 22852552aa1b7198931842ddf824af4dd09e2814

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_15547/index.html

[-- Attachment #2: Type: text/html, Size: 1434 bytes --]

✓ i915.CI.BAT: success for tests/intel/kms_pm_dc: Add test to validate YUV420 with DC3CO (rev4)

[Patchwork]

[-- Attachment #1: Type: text/plain, Size: 1020 bytes --]

== Series Details ==

Series: tests/intel/kms_pm_dc: Add test to validate YUV420 with DC3CO (rev4)
URL   : https://patchwork.freedesktop.org/series/169908/
State : success

== Summary ==

CI Bug Log - changes from IGT_9012 -> IGTPW_15547
====================================================

Summary
-------

  **SUCCESS**

  No regressions found.

  External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_15547/index.html

Participating hosts (41 -> 39)
------------------------------

  Missing    (2): bat-dg2-13 fi-bsw-nick 


Changes
-------

  No changes found


Build changes
-------------

  * CI: CI-20190529 -> None
  * IGT: IGT_9012 -> IGTPW_15547

  CI-20190529: 20190529
  CI_DRM_18842: 22852552aa1b7198931842ddf824af4dd09e2814 @ git://anongit.freedesktop.org/gfx-ci/linux
  IGTPW_15547: 15547
  IGT_9012: d94a55886c7eec82a791728d3cc1c4a6aa945281 @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_15547/index.html

[-- Attachment #2: Type: text/html, Size: 1586 bytes --]

[PATCH i-g-t 0/2] tests/intel/kms_pm_dc: Add test to validate YUV420 with DC3CO

[Jeevan B]

Fix PSR/PR entry timeout in dynamic subtests and
Add test to validate YUV420 with DC3CO

Signed-off-by: Jeevan B <jeevan.b@intel.com>

Jeevan B (2):
  tests/intel/kms_pm_dc: Fix PSR/PR entry timeout in dynamic subtests
  tests/intel/kms_pm_dc: Add test to validate YUV420 with DC3CO

 tests/intel/kms_pm_dc.c | 92 ++++++++++++++++++++++++-----------------
 1 file changed, 55 insertions(+), 37 deletions(-)

-- 
2.43.0