[PATCH v3 00/13] Fix leaks in rc core

[PATCH v3 00/13] Fix leaks in rc core

[Sean Young]

Changes since v2:
 - sashiko had many more good review comments

Changes since v1:
 - sashiko had many good review comments
 - Added fix rc: Use after free in ir_raw_event_handle()
 - Added fix meson-ir-tx: Ensure probe error is propagated
 - Added fix redrat3: Ensure all urbs are suspended
 - Added fix media: redrat3: Error path leaves device in transmitting state
 - streamzap fix was incorrect
 - Other minor fixes


Sean Young (13):
  media: streamzap: Add missing rc_unregister_device()
  media: redrat3: Ensure rc device is freed if enable_detector() fails
  media: redrat3: Ensure we don't read beyond the end of the packet
  media: redrat3: Ensure all urbs are suspended
  media: redrat3: Error path leaves device in transmitting state
  media: sunxi-cir: Ensure no more interrupts can occur before free
  media: meson-ir-tx: Ensure clock is disabled on unbind
  media: meson-ir-tx: Ensure rc_free_device() is called on unbind
  media: meson-ir-tx: Ensure probe error is propagated
  media: ir-hix5hd2: Ensure rdev is setup before interrupts are enabled
  media: rc: Use after free in ir_raw_event_handle()
  media: rc: Fix use after free in bpf progs
  media: rc: Fix race condition during rc_register_device()

 drivers/media/rc/bpf-lirc.c    | 18 ++++++++++-----
 drivers/media/rc/ir-hix5hd2.c  |  5 +++--
 drivers/media/rc/meson-ir-tx.c | 14 +++++-------
 drivers/media/rc/rc-ir-raw.c   | 40 ++++++++++------------------------
 drivers/media/rc/rc-main.c     | 18 +++++++++------
 drivers/media/rc/redrat3.c     | 35 ++++++++++++++++++++++++-----
 drivers/media/rc/streamzap.c   |  1 +
 drivers/media/rc/sunxi-cir.c   |  2 +-
 8 files changed, 75 insertions(+), 58 deletions(-)

-- 
2.55.0

[PATCH v3 01/13] media: streamzap: Add missing rc_unregister_device()

[Sean Young]

If usb_submit_urb() fails during probe, then the error path is missing a
call to rc_unregister_device(), which will leak various things like the
input device.

Fixes: 42844992664f ("media: rc: streamzap: Error handling in probe")
Signed-off-by: Sean Young <sean@mess.org>
---
 drivers/media/rc/streamzap.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/media/rc/streamzap.c b/drivers/media/rc/streamzap.c
index 307985d74fe8..41195ad82734 100644
--- a/drivers/media/rc/streamzap.c
+++ b/drivers/media/rc/streamzap.c
@@ -365,6 +365,7 @@ static int streamzap_probe(struct usb_interface *intf,
 
 	return 0;
 rc_submit_fail:
+	rc_unregister_device(sz->rdev);
 	rc_free_device(sz->rdev);
 	usb_set_intfdata(intf, NULL);
 rc_dev_fail:
-- 
2.55.0

[PATCH v3 02/13] media: redrat3: Ensure rc device is freed if enable_detector() fails

[Sean Young]

This particular error path does not free the rc device at all, with
its priv pointer still pointing at freed memory.

Fixes: 2154be651b90 ("[media] redrat3: new rc-core IR transceiver device driver")
Signed-off-by: Sean Young <sean@mess.org>
---
 drivers/media/rc/redrat3.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/media/rc/redrat3.c b/drivers/media/rc/redrat3.c
index 3f828a564e19..2b639fe59923 100644
--- a/drivers/media/rc/redrat3.c
+++ b/drivers/media/rc/redrat3.c
@@ -979,6 +979,7 @@ static int redrat3_dev_probe(struct usb_interface *intf,
 	struct usb_endpoint_descriptor *ep_narrow = NULL;
 	struct usb_endpoint_descriptor *ep_wide = NULL;
 	struct usb_endpoint_descriptor *ep_out = NULL;
+	struct rc_dev *rc = NULL;
 	u8 addr, attrs;
 	int pipe, i;
 	int retval = -ENOMEM;
@@ -1102,26 +1103,31 @@ static int redrat3_dev_probe(struct usb_interface *intf,
 	if (retval)
 		goto redrat_free;
 
-	rr3->rc = redrat3_init_rc_dev(rr3);
-	if (!rr3->rc) {
+	rc = redrat3_init_rc_dev(rr3);
+	if (!rc) {
 		retval = -ENOMEM;
 		goto led_free;
 	}
 
+	rr3->rc = rc;
+
 	/* might be all we need to do? */
 	retval = redrat3_enable_detector(rr3);
 	if (retval < 0)
-		goto led_free;
+		goto rc_free;
 
 	/* we can register the device now, as it is ready */
 	usb_set_intfdata(intf, rr3);
 
 	return 0;
 
+rc_free:
+	rc_unregister_device(rc);
 led_free:
 	led_classdev_unregister(&rr3->led);
 redrat_free:
 	redrat3_delete(rr3, rr3->udev);
+	rc_free_device(rc);
 
 no_endpoints:
 	return retval;
-- 
2.55.0

[PATCH v3 03/13] media: redrat3: Ensure we don't read beyond the end of the packet

[Sean Young]

The length and offset is provided by the usb device, so it should be
validated.

Fixes: 2154be651b90 ("[media] redrat3: new rc-core IR transceiver device driver")
Signed-off-by: Sean Young <sean@mess.org>
---
 drivers/media/rc/redrat3.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/media/rc/redrat3.c b/drivers/media/rc/redrat3.c
index 2b639fe59923..f86efcb74e6e 100644
--- a/drivers/media/rc/redrat3.c
+++ b/drivers/media/rc/redrat3.c
@@ -358,8 +358,24 @@ static void redrat3_process_ir_data(struct redrat3_dev *rr3)
 
 	/* process each rr3 encoded byte into an int */
 	sig_size = be16_to_cpu(rr3->irdata.sig_size);
+
+	/*
+	 * Note we are not checking if we are reading beyond the end of the
+	 * packet which was sent, and reading stale data. If the device
+	 * sends a packet which is short then we get garbage IR, but no
+	 * out of bounds read.
+	 */
+	if (sig_size > RR3_MAX_SIG_SIZE) {
+		dev_err(dev, "length %u is incorrect\n", sig_size);
+		return;
+	}
+
 	for (i = 0; i < sig_size; i++) {
 		offset = rr3->irdata.sigdata[i];
+		if (offset >= RR3_DRIVER_MAXLENS) {
+			dev_err(dev, "offset %u is incorrect\n", offset);
+			return;
+		}
 		val = get_unaligned_be16(&rr3->irdata.lens[offset]);
 
 		/* we should always get pulse/space/pulse/space samples */
-- 
2.55.0

[PATCH v3 04/13] media: redrat3: Ensure all urbs are suspended

[Sean Young]

Ensure that the learn urb is stopped before suspend.

Fixes: c49fcdde38cb ("[media] redrat3: enable carrier reports using wideband receiver")
Signed-off-by: Sean Young <sean@mess.org>
---
 drivers/media/rc/redrat3.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/media/rc/redrat3.c b/drivers/media/rc/redrat3.c
index f86efcb74e6e..994d4864520c 100644
--- a/drivers/media/rc/redrat3.c
+++ b/drivers/media/rc/redrat3.c
@@ -1170,6 +1170,7 @@ static int redrat3_dev_suspend(struct usb_interface *intf, pm_message_t message)
 	usb_kill_urb(rr3->narrow_urb);
 	usb_kill_urb(rr3->wide_urb);
 	usb_kill_urb(rr3->flash_urb);
+	usb_kill_urb(rr3->learn_urb);
 	return 0;
 }
 
-- 
2.55.0

[PATCH v3 05/13] media: redrat3: Error path leaves device in transmitting state

[Sean Young]

If the allocation fails, transmitting is left as true and the transmitter
cannot be used any more.

Signed-off-by: Sean Young <sean@mess.org>
---
 drivers/media/rc/redrat3.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/media/rc/redrat3.c b/drivers/media/rc/redrat3.c
index 994d4864520c..bc75f68ca535 100644
--- a/drivers/media/rc/redrat3.c
+++ b/drivers/media/rc/redrat3.c
@@ -781,9 +781,6 @@ static int redrat3_transmit_ir(struct rc_dev *rcdev, unsigned *txbuf,
 	if (count > RR3_MAX_SIG_SIZE - RR3_TX_TRAILER_LEN)
 		return -EINVAL;
 
-	/* rr3 will disable rc detector on transmit */
-	rr3->transmitting = true;
-
 	sample_lens = kzalloc_objs(*sample_lens, RR3_DRIVER_MAXLENS);
 	if (!sample_lens)
 		return -ENOMEM;
@@ -794,6 +791,9 @@ static int redrat3_transmit_ir(struct rc_dev *rcdev, unsigned *txbuf,
 		goto out;
 	}
 
+	/* rr3 will disable rc detector on transmit */
+	rr3->transmitting = true;
+
 	for (i = 0; i < count; i++) {
 		cur_sample_len = redrat3_us_to_len(txbuf[i]);
 		if (cur_sample_len > 0xffff) {
-- 
2.55.0

[PATCH v3 06/13] media: sunxi-cir: Ensure no more interrupts can occur before free

[Sean Young]

Only call rc_free_device() once the hardware has been stopped.

Fixes: dccc0c3ddf8f ("media: rc: fix race between unregister and urb/irq callbacks")
Signed-off-by: Sean Young <sean@mess.org>
---
 drivers/media/rc/sunxi-cir.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/rc/sunxi-cir.c b/drivers/media/rc/sunxi-cir.c
index 28e840a7e5b8..af1ee08ffdbe 100644
--- a/drivers/media/rc/sunxi-cir.c
+++ b/drivers/media/rc/sunxi-cir.c
@@ -374,8 +374,8 @@ static void sunxi_ir_remove(struct platform_device *pdev)
 	struct sunxi_ir *ir = platform_get_drvdata(pdev);
 
 	rc_unregister_device(ir->rc);
-	rc_free_device(ir->rc);
 	sunxi_ir_hw_exit(&pdev->dev);
+	rc_free_device(ir->rc);
 }
 
 static void sunxi_ir_shutdown(struct platform_device *pdev)
-- 
2.55.0

Re: [PATCH v3 06/13] media: sunxi-cir: Ensure no more interrupts can occur before free

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:

Pre-existing issues:
- [High] The patch attempts to fix a race condition by reordering `rc_free_device()` after `sunxi_ir_hw_exit()`, but fails to synchronize or explicitly disable the devm-managed IRQ, leaving the race open.
- [High] The device is registered with the RC core before its hardware clocks are enabled, resulting in MMIO accesses to unclocked registers during probe.
--

--- Patch [6]: [PATCH v3 06/13] media: sunxi-cir: Ensure no more interrupts can occur before free ---
commit a8d7020d0e53fc07953c4088225c769898287e76
Author: Sean Young <sean@mess.org>

media: sunxi-cir: Ensure no more interrupts can occur before free

This commit reorders rc_free_device() in the remove function so that it is
called after the hardware is shut down. This is intended to fix a race
between device unregistration and the interrupt callback.

> diff --git a/drivers/media/rc/sunxi-cir.c b/drivers/media/rc/sunxi-cir.c
> index 28e840a7e5b8c..af1ee08ffdbec 100644
> --- a/drivers/media/rc/sunxi-cir.c
> +++ b/drivers/media/rc/sunxi-cir.c
> @@ -374,8 +374,8 @@ static void sunxi_ir_remove(struct platform_device *pdev)
>  	struct sunxi_ir *ir = platform_get_drvdata(pdev);
>  
>  	rc_unregister_device(ir->rc);
> -	rc_free_device(ir->rc);
>  	sunxi_ir_hw_exit(&pdev->dev);
> +	rc_free_device(ir->rc);
>  }

[Severity: High]
This isn't a bug introduced by this patch, but does this actually close the
race condition?

In sunxi_ir_remove(), sunxi_ir_hw_exit() disables the hardware clocks.
However, if the devm-managed interrupt is not explicitly disabled and
synchronized (for example, using disable_irq()), couldn't an interrupt
still run concurrently or immediately after clocks are disabled?

If sunxi_ir_irq() fires after sunxi_ir_hw_exit() runs, it will attempt to
read SUNXI_IR_RXSTA_REG while the clocks are disabled, which could cause a
crash. Additionally, since the IRQ is devm-managed, it could also race with
rc_free_device(), leading to a use-after-free on ir->rc.

This same issue appears to exist in sunxi_ir_suspend(), where clocks are
disabled while system interrupts are still active.

[Severity: High]
This is a pre-existing issue, but I noticed another potential problem in
the probe path. Does sunxi_ir_probe() access unclocked registers during
device registration?

In sunxi_ir_probe(), rc_register_device() is called before sunxi_ir_hw_init():

	ret = rc_register_device(ir->rc);
	if (ret) {
		dev_err(dev, "failed to register rc device\n");
		goto exit_free_dev;
	}
...
	ret = sunxi_ir_hw_init(dev);

The registration synchronously invokes core callbacks which unconditionally
call the driver's protocol change hook, and in turn sunxi_ir_set_timeout().
This callback writes to the SUNXI_IR_CIR_REG MMIO register. Since ir->clk
and ir->apb_clk are not enabled until sunxi_ir_hw_init() runs later, won't
this cause an abort or bus fault by accessing APB memory-mapped registers
without their clocks enabled?

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/cover.1784715737.git.sean@mess.org?part=6

[PATCH v3 07/13] media: meson-ir-tx: Ensure clock is disabled on unbind

[Sean Young]

clk_prepare_enable() needs a call to clk_disable_unprepare() on
driver unbind. Make it devm managed.

Fixes: 49be1c78d575 ("media: rc: introduce Meson IR TX driver")
Signed-off-by: Sean Young <sean@mess.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 drivers/media/rc/meson-ir-tx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/rc/meson-ir-tx.c b/drivers/media/rc/meson-ir-tx.c
index fded2c256f2a..e7bb107e6a84 100644
--- a/drivers/media/rc/meson-ir-tx.c
+++ b/drivers/media/rc/meson-ir-tx.c
@@ -288,8 +288,8 @@ static int meson_irtx_mod_clock_probe(struct meson_irtx *ir,
 	if (!np)
 		return -ENODEV;
 
-	clock = devm_clk_get(ir->dev, "xtal");
-	if (IS_ERR(clock) || clk_prepare_enable(clock))
+	clock = devm_clk_get_enabled(ir->dev, "xtal");
+	if (IS_ERR(clock))
 		return -ENODEV;
 
 	*clk_nr = IRB_MOD_XTAL3_CLK;
-- 
2.55.0

[PATCH v3 07/13] media: meson-ir-tx: Ensure clock is disabled on unbind

[Sean Young]

clk_prepare_enable() needs a call to clk_disable_unprepare() on
driver unbind. Make it devm managed.

Fixes: 49be1c78d575 ("media: rc: introduce Meson IR TX driver")
Signed-off-by: Sean Young <sean@mess.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 drivers/media/rc/meson-ir-tx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/rc/meson-ir-tx.c b/drivers/media/rc/meson-ir-tx.c
index fded2c256f2a..e7bb107e6a84 100644
--- a/drivers/media/rc/meson-ir-tx.c
+++ b/drivers/media/rc/meson-ir-tx.c
@@ -288,8 +288,8 @@ static int meson_irtx_mod_clock_probe(struct meson_irtx *ir,
 	if (!np)
 		return -ENODEV;
 
-	clock = devm_clk_get(ir->dev, "xtal");
-	if (IS_ERR(clock) || clk_prepare_enable(clock))
+	clock = devm_clk_get_enabled(ir->dev, "xtal");
+	if (IS_ERR(clock))
 		return -ENODEV;
 
 	*clk_nr = IRB_MOD_XTAL3_CLK;
-- 
2.55.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH v3 07/13] media: meson-ir-tx: Ensure clock is disabled on unbind

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:

Pre-existing issues:
- [High] This problem wasn't introduced by this patch, but the error code from `devm_clk_get_enabled()` is unconditionally masked with `-ENODEV`, which breaks probe deferral.
- [High] This problem wasn't introduced by this patch, but the error return from `platform_get_irq()` is masked by returning `-ENODEV`, breaking probe deferral.
--

--- Patch [7]: [PATCH v3 07/13] media: meson-ir-tx: Ensure clock is disabled on unbind ---
commit 902362d56de8e550d8a16fef5053c172039aa2ab
Author: Sean Young <sean@mess.org>
Subject: media: meson-ir-tx: Ensure clock is disabled on unbind

This commit replaces the manual devm_clk_get and clk_prepare_enable calls
with devm_clk_get_enabled. This ensures that the clock is properly
disabled when the driver is unbound.

> diff --git a/drivers/media/rc/meson-ir-tx.c b/drivers/media/rc/meson-ir-tx.c
> index fded2c256f2a6..e7bb107e6a843 100644
> --- a/drivers/media/rc/meson-ir-tx.c
> +++ b/drivers/media/rc/meson-ir-tx.c
> @@ -288,8 +288,8 @@ static int meson_irtx_mod_clock_probe(struct meson_irtx *ir,
>  	if (!np)
>  		return -ENODEV;
>  
> -	clock = devm_clk_get(ir->dev, "xtal");
> -	if (IS_ERR(clock) || clk_prepare_enable(clock))
> +	clock = devm_clk_get_enabled(ir->dev, "xtal");
> +	if (IS_ERR(clock))
>  		return -ENODEV;

[Severity: High]
This is a pre-existing issue, but does dropping the actual error code from
devm_clk_get_enabled() and returning -ENODEV break probe deferral?

If the clock provider isn't ready, devm_clk_get_enabled() returns
-EPROBE_DEFER, which gets masked here. Should this return PTR_ERR(clock)
instead?

[ ... ]

While reviewing this file, I also noticed another pre-existing issue in
the same driver:

drivers/media/rc/meson-ir-tx.c:meson_irtx_probe() {
    ...
    irq = platform_get_irq(pdev, 0);
    if (irq < 0)
        return -ENODEV;
    ...
}

[Severity: High]
This isn't a bug introduced by this patch, but would returning a hardcoded
-ENODEV here break probe deferral if the interrupt controller is not yet
ready?

When platform_get_irq() returns -EPROBE_DEFER, it seems the code currently
discards it. Would returning the actual error code be more appropriate?

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/cover.1784715737.git.sean@mess.org?part=7

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH v3 08/13] media: meson-ir-tx: Ensure rc_free_device() is called on unbind

[Sean Young]

Make rc_dev devm managed.

Fixes: dccc0c3ddf8f ("media: rc: fix race between unregister and urb/irq callbacks")
Signed-off-by: Sean Young <sean@mess.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 drivers/media/rc/meson-ir-tx.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/media/rc/meson-ir-tx.c b/drivers/media/rc/meson-ir-tx.c
index e7bb107e6a84..abb107d19e8c 100644
--- a/drivers/media/rc/meson-ir-tx.c
+++ b/drivers/media/rc/meson-ir-tx.c
@@ -345,7 +345,7 @@ static int meson_irtx_probe(struct platform_device *pdev)
 	if (ret)
 		return dev_err_probe(dev, ret, "irq request failed\n");
 
-	rc = rc_allocate_device(RC_DRIVER_IR_RAW_TX);
+	rc = devm_rc_allocate_device(dev, RC_DRIVER_IR_RAW_TX);
 	if (!rc)
 		return -ENOMEM;
 
@@ -358,10 +358,8 @@ static int meson_irtx_probe(struct platform_device *pdev)
 	rc->s_tx_duty_cycle = meson_irtx_set_duty_cycle;
 
 	ret = devm_rc_register_device(dev, rc);
-	if (ret < 0) {
-		rc_free_device(rc);
+	if (ret < 0)
 		return dev_err_probe(dev, ret, "rc_dev registration failed\n");
-	}
 
 	return 0;
 }
-- 
2.55.0

[PATCH v3 08/13] media: meson-ir-tx: Ensure rc_free_device() is called on unbind

[Sean Young]

Make rc_dev devm managed.

Fixes: dccc0c3ddf8f ("media: rc: fix race between unregister and urb/irq callbacks")
Signed-off-by: Sean Young <sean@mess.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 drivers/media/rc/meson-ir-tx.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/media/rc/meson-ir-tx.c b/drivers/media/rc/meson-ir-tx.c
index e7bb107e6a84..abb107d19e8c 100644
--- a/drivers/media/rc/meson-ir-tx.c
+++ b/drivers/media/rc/meson-ir-tx.c
@@ -345,7 +345,7 @@ static int meson_irtx_probe(struct platform_device *pdev)
 	if (ret)
 		return dev_err_probe(dev, ret, "irq request failed\n");
 
-	rc = rc_allocate_device(RC_DRIVER_IR_RAW_TX);
+	rc = devm_rc_allocate_device(dev, RC_DRIVER_IR_RAW_TX);
 	if (!rc)
 		return -ENOMEM;
 
@@ -358,10 +358,8 @@ static int meson_irtx_probe(struct platform_device *pdev)
 	rc->s_tx_duty_cycle = meson_irtx_set_duty_cycle;
 
 	ret = devm_rc_register_device(dev, rc);
-	if (ret < 0) {
-		rc_free_device(rc);
+	if (ret < 0)
 		return dev_err_probe(dev, ret, "rc_dev registration failed\n");
-	}
 
 	return 0;
 }
-- 
2.55.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH v3 09/13] media: meson-ir-tx: Ensure probe error is propagated

[Sean Young]

devm_clk_get_enabled() may return -EPROBE_DEFER which needs to be
propagated else the probe will not be deferred, it will fail instead.

Fixes: 49be1c78d575 ("media: rc: introduce Meson IR TX driver")
Signed-off-by: Sean Young <sean@mess.org>
---
 drivers/media/rc/meson-ir-tx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/rc/meson-ir-tx.c b/drivers/media/rc/meson-ir-tx.c
index abb107d19e8c..174d5135e1bb 100644
--- a/drivers/media/rc/meson-ir-tx.c
+++ b/drivers/media/rc/meson-ir-tx.c
@@ -290,7 +290,7 @@ static int meson_irtx_mod_clock_probe(struct meson_irtx *ir,
 
 	clock = devm_clk_get_enabled(ir->dev, "xtal");
 	if (IS_ERR(clock))
-		return -ENODEV;
+		return PTR_ERR(clock);
 
 	*clk_nr = IRB_MOD_XTAL3_CLK;
 	ir->clk_rate = clk_get_rate(clock) / 3;
@@ -324,7 +324,7 @@ static int meson_irtx_probe(struct platform_device *pdev)
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
-		return -ENODEV;
+		return irq;
 
 	ir->dev = dev;
 	ir->carrier = MIRTX_DEFAULT_CARRIER;
-- 
2.55.0

[PATCH v3 09/13] media: meson-ir-tx: Ensure probe error is propagated

[Sean Young]

devm_clk_get_enabled() may return -EPROBE_DEFER which needs to be
propagated else the probe will not be deferred, it will fail instead.

Fixes: 49be1c78d575 ("media: rc: introduce Meson IR TX driver")
Signed-off-by: Sean Young <sean@mess.org>
---
 drivers/media/rc/meson-ir-tx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/rc/meson-ir-tx.c b/drivers/media/rc/meson-ir-tx.c
index abb107d19e8c..174d5135e1bb 100644
--- a/drivers/media/rc/meson-ir-tx.c
+++ b/drivers/media/rc/meson-ir-tx.c
@@ -290,7 +290,7 @@ static int meson_irtx_mod_clock_probe(struct meson_irtx *ir,
 
 	clock = devm_clk_get_enabled(ir->dev, "xtal");
 	if (IS_ERR(clock))
-		return -ENODEV;
+		return PTR_ERR(clock);
 
 	*clk_nr = IRB_MOD_XTAL3_CLK;
 	ir->clk_rate = clk_get_rate(clock) / 3;
@@ -324,7 +324,7 @@ static int meson_irtx_probe(struct platform_device *pdev)
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
-		return -ENODEV;
+		return irq;
 
 	ir->dev = dev;
 	ir->carrier = MIRTX_DEFAULT_CARRIER;
-- 
2.55.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH v3 10/13] media: ir-hix5hd2: Ensure rdev is setup before interrupts are enabled

[Sean Young]

Once the interrupt handler is enabled, priv->rdev can be used. Ensure
it is setup correctly so there is no race condition.

Fixes: a84fcdaa9058 ("[media] rc: Introduce hix5hd2 IR transmitter driver")
Signed-off-by: Sean Young <sean@mess.org>
---
 drivers/media/rc/ir-hix5hd2.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/media/rc/ir-hix5hd2.c b/drivers/media/rc/ir-hix5hd2.c
index 1b061e4a3dcf..aa3de4d57a58 100644
--- a/drivers/media/rc/ir-hix5hd2.c
+++ b/drivers/media/rc/ir-hix5hd2.c
@@ -316,6 +316,9 @@ static int hix5hd2_ir_probe(struct platform_device *pdev)
 	if (ret < 0)
 		goto clkerr;
 
+	priv->rdev = rdev;
+	priv->dev = dev;
+
 	if (devm_request_irq(dev, priv->irq, hix5hd2_ir_rx_interrupt,
 			     0, pdev->name, priv) < 0) {
 		dev_err(dev, "IRQ %d register failed\n", priv->irq);
@@ -323,8 +326,6 @@ static int hix5hd2_ir_probe(struct platform_device *pdev)
 		goto regerr;
 	}
 
-	priv->rdev = rdev;
-	priv->dev = dev;
 	platform_set_drvdata(pdev, priv);
 
 	return ret;
-- 
2.55.0

[PATCH v3 11/13] media: rc: Use after free in ir_raw_event_handle()

[Sean Young]

If rc_unregister_device() is called while IR is being processed, then
ir_raw_event_handle() could call wake_up_process(dev->raw->thread)
after kthread_stop(dev->raw->thread).

Fixes: dccc0c3ddf8f ("media: rc: fix race between unregister and urb/irq callbacks")
Signed-off-by: Sean Young <sean@mess.org>
---
 drivers/media/rc/rc-ir-raw.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/media/rc/rc-ir-raw.c b/drivers/media/rc/rc-ir-raw.c
index ba24c2f22d39..f066176c9f37 100644
--- a/drivers/media/rc/rc-ir-raw.c
+++ b/drivers/media/rc/rc-ir-raw.c
@@ -637,6 +637,7 @@ int ir_raw_event_register(struct rc_dev *dev)
 	if (IS_ERR(thread))
 		return PTR_ERR(thread);
 
+	get_task_struct(thread);
 	dev->raw->thread = thread;
 
 	mutex_lock(&ir_raw_handler_lock);
@@ -648,8 +649,12 @@ int ir_raw_event_register(struct rc_dev *dev)
 
 void ir_raw_event_free(struct rc_dev *dev)
 {
-	kfree(dev->raw);
-	dev->raw = NULL;
+	if (dev->raw) {
+		if (dev->raw->thread)
+			put_task_struct(dev->raw->thread);
+		kfree(dev->raw);
+		dev->raw = NULL;
+	}
 }
 
 void ir_raw_event_unregister(struct rc_dev *dev)
-- 
2.55.0

[PATCH v3 12/13] media: rc: Fix use after free in bpf progs

[Sean Young]

Since commit dccc0c3ddf8f ("media: rc: fix race between unregister and
urb/irq callbacks"), rcdev->raw is no longer set to NULL after device
unregister. raw->progs could point to stale data.

Fixes: dccc0c3ddf8f ("media: rc: fix race between unregister and urb/irq callbacks")
Signed-off-by: Sean Young <sean@mess.org>
---
 drivers/media/rc/bpf-lirc.c  | 18 +++++++++++++-----
 drivers/media/rc/rc-ir-raw.c | 11 +++--------
 2 files changed, 16 insertions(+), 13 deletions(-)

diff --git a/drivers/media/rc/bpf-lirc.c b/drivers/media/rc/bpf-lirc.c
index 2f7564f26445..14ab611e7445 100644
--- a/drivers/media/rc/bpf-lirc.c
+++ b/drivers/media/rc/bpf-lirc.c
@@ -148,12 +148,13 @@ static int lirc_bpf_attach(struct rc_dev *rcdev, struct bpf_prog *prog)
 	if (ret)
 		return ret;
 
-	raw = rcdev->raw;
-	if (!raw) {
+	if (!rcdev->registered) {
 		ret = -ENODEV;
 		goto unlock;
 	}
 
+	raw = rcdev->raw;
+
 	old_array = lirc_rcu_dereference(raw->progs);
 	if (old_array && bpf_prog_array_length(old_array) >= BPF_MAX_PROGS) {
 		ret = -E2BIG;
@@ -186,12 +187,13 @@ static int lirc_bpf_detach(struct rc_dev *rcdev, struct bpf_prog *prog)
 	if (ret)
 		return ret;
 
-	raw = rcdev->raw;
-	if (!raw) {
+	if (!rcdev->registered) {
 		ret = -ENODEV;
 		goto unlock;
 	}
 
+	raw = rcdev->raw;
+
 	old_array = lirc_rcu_dereference(raw->progs);
 	ret = bpf_prog_array_copy(old_array, prog, NULL, 0, &new_array);
 	/*
@@ -235,7 +237,8 @@ void lirc_bpf_free(struct rc_dev *rcdev)
 	struct bpf_prog_array_item *item;
 	struct bpf_prog_array *array;
 
-	array = lirc_rcu_dereference(rcdev->raw->progs);
+	array = rcu_replace_pointer(rcdev->raw->progs, NULL,
+				    lockdep_is_held(&ir_raw_handler_lock));
 	if (!array)
 		return;
 
@@ -316,6 +319,11 @@ int lirc_prog_query(const union bpf_attr *attr, union bpf_attr __user *uattr)
 	if (ret)
 		goto put;
 
+	if (!rcdev->registered) {
+		ret = -ENODEV;
+		goto unlock;
+	}
+
 	progs = lirc_rcu_dereference(rcdev->raw->progs);
 	cnt = progs ? bpf_prog_array_length(progs) : 0;
 
diff --git a/drivers/media/rc/rc-ir-raw.c b/drivers/media/rc/rc-ir-raw.c
index f066176c9f37..26962b500b0c 100644
--- a/drivers/media/rc/rc-ir-raw.c
+++ b/drivers/media/rc/rc-ir-raw.c
@@ -650,8 +650,11 @@ int ir_raw_event_register(struct rc_dev *dev)
 void ir_raw_event_free(struct rc_dev *dev)
 {
 	if (dev->raw) {
+		mutex_lock(&ir_raw_handler_lock);
 		if (dev->raw->thread)
 			put_task_struct(dev->raw->thread);
+		lirc_bpf_free(dev);
+		mutex_unlock(&ir_raw_handler_lock);
 		kfree(dev->raw);
 		dev->raw = NULL;
 	}
@@ -661,9 +664,6 @@ void ir_raw_event_unregister(struct rc_dev *dev)
 {
 	struct ir_raw_handler *handler;
 
-	if (!dev || !dev->raw)
-		return;
-
 	kthread_stop(dev->raw->thread);
 	timer_delete_sync(&dev->raw->edge_handle);
 
@@ -676,11 +676,6 @@ void ir_raw_event_unregister(struct rc_dev *dev)
 
 	lirc_bpf_free(dev);
 
-	/*
-	 * A user can be calling bpf(BPF_PROG_{QUERY|ATTACH|DETACH}), so
-	 * ensure that the raw member is null on unlock; this is how
-	 * "device gone" is checked.
-	 */
 	mutex_unlock(&ir_raw_handler_lock);
 }
 
-- 
2.55.0

Re: [PATCH v3 12/13] media: rc: Fix use after free in bpf progs

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [High] NULL pointer dereference in BPF LIRC operations due to missing `!raw` check on device registration error path.
--

--- Patch [12]: [PATCH v3 12/13] media: rc: Fix use after free in bpf progs ---
commit 7dc21e94d34583cca33adec11dc3c1b8af880d26
Author: Sean Young <sean@mess.org>

media: rc: Fix use after free in bpf progs
    
Since commit dccc0c3ddf8f ("media: rc: fix race between unregister and
urb/irq callbacks"), rcdev->raw is no longer set to NULL after device
unregister. raw->progs could point to stale data.

> diff --git a/drivers/media/rc/bpf-lirc.c b/drivers/media/rc/bpf-lirc.c
> index 2f7564f26445c..14ab611e74457 100644
> --- a/drivers/media/rc/bpf-lirc.c
> +++ b/drivers/media/rc/bpf-lirc.c
> @@ -148,12 +148,13 @@ static int lirc_bpf_attach(struct rc_dev *rcdev, struct bpf_prog *prog)
>  	if (ret)
>  		return ret;
>  
> -	raw = rcdev->raw;
> -	if (!raw) {
> +	if (!rcdev->registered) {
>  		ret = -ENODEV;
>  		goto unlock;
>  	}
>  
> +	raw = rcdev->raw;
> +
>  	old_array = lirc_rcu_dereference(raw->progs);

[Severity: High]
Can this lead to a NULL pointer dereference if rc_register_device() fails?

In rc_register_device(), dev->registered is set to true before lirc_register()
makes the device visible to userspace. If a subsequent initialization step fails
(such as input_register_device() or ir_raw_event_register()), the error path
calls ir_raw_event_free(dev), which frees dev->raw and sets it to NULL.

However, dev->registered is never reverted to false. If a concurrent userspace
process opens /dev/lircX and calls bpf(BPF_PROG_ATTACH) while the fd is kept
open, the !rcdev->registered check here would pass. The raw pointer would
then be NULL, causing lirc_rcu_dereference(raw->progs) to crash.

[ ... ]

> @@ -186,12 +187,13 @@ static int lirc_bpf_detach(struct rc_dev *rcdev, struct bpf_prog *prog)
>  	if (ret)
>  		return ret;
>  
> -	raw = rcdev->raw;
> -	if (!raw) {
> +	if (!rcdev->registered) {
>  		ret = -ENODEV;
>  		goto unlock;
>  	}
>  
> +	raw = rcdev->raw;
> +
>  	old_array = lirc_rcu_dereference(raw->progs);

[Severity: High]
Could the same NULL pointer dereference occur here in lirc_bpf_detach() if
userspace races with device registration failure?

[ ... ]

> @@ -316,6 +319,11 @@ int lirc_prog_query(const union bpf_attr *attr, union bpf_attr __user *uattr)
>  	if (ret)
>  		goto put;
>  
> +	if (!rcdev->registered) {
> +		ret = -ENODEV;
> +		goto unlock;
> +	}
> +
>  	progs = lirc_rcu_dereference(rcdev->raw->progs);

[Severity: High]
Does this code also suffer from the same NULL pointer dereference risk on
rcdev->raw when rc_register_device() hits an error path?

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/cover.1784715737.git.sean@mess.org?part=12

[PATCH v3 13/13] media: rc: Fix race condition during rc_register_device()

[Sean Young]

The correct sequence for rc core is so:

     rc_allocation_device()

     /*
      * setup hardware and now calls to ir_raw_event_store etc are
      * permitted, as well as rc_keydown. There is no rc device in sysfs
      * or lirc chardev.
      */
     rc_register_device()

     /*
      * After rc_register_device(), the rc device can be used now from lirc
      * chardev, sysfs and IR is now decoded and reported.
      */

     rc_unregister_device()
     /*
      * User space can no longer access /dev/lirc or the rc sysfs
      * attributes. They will get -ENODEV if they still have a file
      * descriptor open.
      * Calls to ir_raw_event_handle() etc or rc_keydown() are permitted
      * but they must stop before the call to rc_free_device(), so
      * this is the time to stop the hardware.
      */
     rc_free_device()

This means that during rc_register_device(), we can get calls to
ir_raw_event_{store,handle,overflow,store_with_filter}. Ensure this
is done race-free.

Signed-off-by: Sean Young <sean@mess.org>
---
 drivers/media/rc/rc-ir-raw.c | 20 +-------------------
 drivers/media/rc/rc-main.c   | 18 +++++++++++-------
 2 files changed, 12 insertions(+), 26 deletions(-)

diff --git a/drivers/media/rc/rc-ir-raw.c b/drivers/media/rc/rc-ir-raw.c
index 26962b500b0c..963562f03770 100644
--- a/drivers/media/rc/rc-ir-raw.c
+++ b/drivers/media/rc/rc-ir-raw.c
@@ -71,9 +71,6 @@ static int ir_raw_event_thread(void *data)
  */
 int ir_raw_event_store(struct rc_dev *dev, struct ir_raw_event *ev)
 {
-	if (!dev->raw)
-		return -EINVAL;
-
 	dev_dbg(&dev->dev, "sample: (%05dus %s)\n",
 		ev->duration, TO_STR(ev->pulse));
 
@@ -102,9 +99,6 @@ int ir_raw_event_store_edge(struct rc_dev *dev, bool pulse)
 	ktime_t			now;
 	struct ir_raw_event	ev = {};
 
-	if (!dev->raw)
-		return -EINVAL;
-
 	now = ktime_get();
 	ev.duration = ktime_to_us(ktime_sub(now, dev->raw->last_event));
 	ev.pulse = !pulse;
@@ -129,9 +123,6 @@ int ir_raw_event_store_with_timeout(struct rc_dev *dev, struct ir_raw_event *ev)
 	ktime_t		now;
 	int		rc = 0;
 
-	if (!dev->raw)
-		return -EINVAL;
-
 	now = ktime_get();
 
 	spin_lock(&dev->raw->edge_spinlock);
@@ -166,9 +157,6 @@ EXPORT_SYMBOL_GPL(ir_raw_event_store_with_timeout);
  */
 int ir_raw_event_store_with_filter(struct rc_dev *dev, struct ir_raw_event *ev)
 {
-	if (!dev->raw)
-		return -EINVAL;
-
 	/* Ignore spaces in idle mode */
 	if (dev->idle && !ev->pulse)
 		return 0;
@@ -200,9 +188,6 @@ EXPORT_SYMBOL_GPL(ir_raw_event_store_with_filter);
  */
 void ir_raw_event_set_idle(struct rc_dev *dev, bool idle)
 {
-	if (!dev->raw)
-		return;
-
 	dev_dbg(&dev->dev, "%s idle mode\n", idle ? "enter" : "leave");
 
 	if (idle) {
@@ -226,7 +211,7 @@ EXPORT_SYMBOL_GPL(ir_raw_event_set_idle);
  */
 void ir_raw_event_handle(struct rc_dev *dev)
 {
-	if (!dev->raw || !dev->raw->thread)
+	if (!dev->raw->thread)
 		return;
 
 	wake_up_process(dev->raw->thread);
@@ -612,9 +597,6 @@ EXPORT_SYMBOL(ir_raw_encode_carrier);
  */
 int ir_raw_event_prepare(struct rc_dev *dev)
 {
-	if (!dev)
-		return -EINVAL;
-
 	dev->raw = kzalloc_obj(*dev->raw);
 	if (!dev->raw)
 		return -ENOMEM;
diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index dda3479ea3ad..365f3d056a06 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -1701,14 +1701,24 @@ static const struct device_type rc_dev_type = {
 struct rc_dev *rc_allocate_device(enum rc_driver_type type)
 {
 	struct rc_dev *dev;
+	int ret;
 
 	dev = kzalloc_obj(*dev);
 	if (!dev)
 		return NULL;
 
+	if (type == RC_DRIVER_IR_RAW) {
+		ret = ir_raw_event_prepare(dev);
+		if (ret < 0) {
+			kfree(dev);
+			return NULL;
+		}
+	}
+
 	if (type != RC_DRIVER_IR_RAW_TX) {
 		dev->input_dev = input_allocate_device();
 		if (!dev->input_dev) {
+			ir_raw_event_free(dev);
 			kfree(dev);
 			return NULL;
 		}
@@ -1724,6 +1734,7 @@ struct rc_dev *rc_allocate_device(enum rc_driver_type type)
 		spin_lock_init(&dev->rc_map.lock);
 		spin_lock_init(&dev->keylock);
 	}
+
 	mutex_init(&dev->lock);
 
 	dev->dev.type = &rc_dev_type;
@@ -1917,12 +1928,6 @@ int rc_register_device(struct rc_dev *dev)
 		dev->sysfs_groups[attr++] = &rc_dev_wakeup_filter_attr_grp;
 	dev->sysfs_groups[attr++] = NULL;
 
-	if (dev->driver_type == RC_DRIVER_IR_RAW) {
-		rc = ir_raw_event_prepare(dev);
-		if (rc < 0)
-			goto out_minor;
-	}
-
 	if (dev->driver_type != RC_DRIVER_IR_RAW_TX) {
 		rc = rc_prepare_rx_device(dev);
 		if (rc)
@@ -1980,7 +1985,6 @@ int rc_register_device(struct rc_dev *dev)
 	ir_free_table(&dev->rc_map);
 out_raw:
 	ir_raw_event_free(dev);
-out_minor:
 	ida_free(&rc_ida, minor);
 	return rc;
 }
-- 
2.55.0