FAILED: patch "[PATCH] can: bcm: add locking when updating filter and timer values" failed to apply to 5.15-stable tree

FAILED: patch "[PATCH] can: bcm: add locking when updating filter and timer values" failed to apply to 5.15-stable tree

[gregkh]

The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y
git checkout FETCH_HEAD
git cherry-pick -x 749179c2e25b95d22499ed29096b3e02d6dfd2b4
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026072013-groggily-broker-cca7@gregkh' --subject-prefix 'PATCH 5.15.y' 'HEAD^..'

Possible dependencies:



thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 749179c2e25b95d22499ed29096b3e02d6dfd2b4 Mon Sep 17 00:00:00 2001
From: Oliver Hartkopp <socketcan@hartkopp.net>
Date: Tue, 14 Jul 2026 18:55:25 +0200
Subject: [PATCH] can: bcm: add locking when updating filter and timer values

KCSAN detected a simultaneous access to timer values that can be
overwritten in bcm_rx_setup() when updating timer and filter content
while bcm_rx_handler(), bcm_rx_timeout_handler() or bcm_rx_thr_handler()
run concurrently on incoming CAN traffic.

Protect the timer (ival1/ival2/kt_ival1/kt_ival2/kt_lastmsg) and filter
(nframes/flags/frames/last_frames) updates in bcm_rx_setup() with a new
per-op bcm_rx_update_lock, taken with the matching scope in the RX
handlers. memcpy_from_msg() is staged into a temporary buffer before the
lock is taken, since it can sleep and must not run under a spinlock.

hrtimer_cancel() is always called without bcm_rx_update_lock held, since
bcm_rx_timeout_handler()/bcm_rx_thr_handler() take the same lock and a
running callback would otherwise deadlock against the canceller.

Also close a related race: bcm_rx_setup() cleared the RTR flag in the
stored reply frame's can_id as a separate, unprotected step after the
frame content was already installed, so a concurrent bcm_rx_handler()
could transmit a stale reply with CAN_RTR_FLAG still set. Fold that
normalization into the initial frame preparation instead (on the staged
buffer for updates, directly on op->frames pre-registration for new
ops), so the installed frame is always atomically self-consistent.

bcm_rx_handler()'s RX_RTR_FRAME check now takes a lock-protected
snapshot of op->flags before deciding whether to call bcm_can_tx(),
but does not hold the lock across that call.

Also take a lock-protected snapshot of the currframe in bcm_can_tx()
to avoid partly overwrites by content updates in bcm_tx_setup().
Finally check if a TX_RESET_MULTI_IDX/SETTIMER might have reset
op->currframe between the two locked sections in bcm_can_tx().

Omit calling hrtimer_forward() with zero interval in bcm_rx_thr_handler().
kt_ival2 may have been concurrently cleared by bcm_rx_setup() before it
cancels this timer, so check kt_ival2 inside the bcm_rx_update_lock.

Fixes: c2aba69d0c36 ("can: bcm: add locking for bcm_op runtime updates")
Reported-by: syzbot+75e5e4ae00c3b4bb544e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-can/6975d5cf.a00a0220.33ccc7.0022.GAE@google.com/
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260714-bcm_fixes-v15-3-562f7e3e42da@hartkopp.net
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

diff --git a/net/can/bcm.c b/net/can/bcm.c
index b612135b017d..1e5f8d65d351 100644
--- a/net/can/bcm.c
+++ b/net/can/bcm.c
@@ -129,6 +129,7 @@ struct bcm_op {
 	struct sock *sk;
 	struct net_device *rx_reg_dev;
 	spinlock_t bcm_tx_lock; /* protect currframe/count in runtime updates */
+	spinlock_t bcm_rx_update_lock; /* protect filter/timer data updates */
 };
 
 struct bcm_sock {
@@ -293,22 +294,28 @@ static int bcm_proc_show(struct seq_file *m, void *v)
  * bcm_can_tx - send the (next) CAN frame to the appropriate CAN interface
  *              of the given bcm tx op
  */
-static void bcm_can_tx(struct bcm_op *op)
+static void bcm_can_tx(struct bcm_op *op, struct canfd_frame *cf)
 {
 	struct sk_buff *skb;
 	struct can_skb_ext *csx;
 	struct net_device *dev;
-	struct canfd_frame *cf;
+	struct canfd_frame cframe;
+	bool cyclic = !cf;
+	unsigned int idx = 0;
 	int err;
 
 	/* no target device? => exit */
 	if (!op->ifindex)
 		return;
 
-	/* read currframe under lock protection */
-	spin_lock_bh(&op->bcm_tx_lock);
-	cf = op->frames + op->cfsiz * op->currframe;
-	spin_unlock_bh(&op->bcm_tx_lock);
+	if (cyclic) {
+		/* read currframe under lock protection */
+		spin_lock_bh(&op->bcm_tx_lock);
+		idx = op->currframe;
+		memcpy(&cframe, op->frames + op->cfsiz * idx, op->cfsiz);
+		cf = &cframe;
+		spin_unlock_bh(&op->bcm_tx_lock);
+	}
 
 	dev = dev_get_by_index(sock_net(op->sk), op->ifindex);
 	if (!dev) {
@@ -341,14 +348,20 @@ static void bcm_can_tx(struct bcm_op *op)
 	if (!err)
 		op->frames_abs++;
 
-	op->currframe++;
+	/* only advance the cyclic sequence if nothing reset currframe while
+	 * we were sending - a concurrent TX_RESET_MULTI_IDX means this
+	 * frame's bookkeeping belongs to a sequence that no longer exists
+	 */
+	if (!cyclic || op->currframe == idx) {
+		op->currframe++;
 
-	/* reached last frame? */
-	if (op->currframe >= op->nframes)
-		op->currframe = 0;
+		/* reached last frame? */
+		if (op->currframe >= op->nframes)
+			op->currframe = 0;
 
-	if (op->count > 0)
-		op->count--;
+		if (op->count > 0)
+			op->count--;
+	}
 
 	spin_unlock_bh(&op->bcm_tx_lock);
 out:
@@ -461,7 +474,7 @@ static enum hrtimer_restart bcm_tx_timeout_handler(struct hrtimer *hrtimer)
 	struct bcm_msg_head msg_head;
 
 	if (op->kt_ival1 && (op->count > 0)) {
-		bcm_can_tx(op);
+		bcm_can_tx(op, NULL);
 		if (!op->count && (op->flags & TX_COUNTEVT)) {
 
 			/* create notification to user */
@@ -478,7 +491,7 @@ static enum hrtimer_restart bcm_tx_timeout_handler(struct hrtimer *hrtimer)
 		}
 
 	} else if (op->kt_ival2) {
-		bcm_can_tx(op);
+		bcm_can_tx(op, NULL);
 	}
 
 	return bcm_tx_set_expiry(op, &op->timer) ?
@@ -622,6 +635,8 @@ static enum hrtimer_restart bcm_rx_timeout_handler(struct hrtimer *hrtimer)
 	struct bcm_op *op = container_of(hrtimer, struct bcm_op, timer);
 	struct bcm_msg_head msg_head;
 
+	spin_lock_bh(&op->bcm_rx_update_lock);
+
 	/* if user wants to be informed, when cyclic CAN-Messages come back */
 	if ((op->flags & RX_ANNOUNCE_RESUME) && op->last_frames) {
 		/* clear received CAN frames to indicate 'nothing received' */
@@ -638,6 +653,8 @@ static enum hrtimer_restart bcm_rx_timeout_handler(struct hrtimer *hrtimer)
 	msg_head.can_id  = op->can_id;
 	msg_head.nframes = 0;
 
+	spin_unlock_bh(&op->bcm_rx_update_lock);
+
 	bcm_send_to_user(op, &msg_head, NULL, 0);
 
 	return HRTIMER_NORESTART;
@@ -686,15 +703,26 @@ static int bcm_rx_thr_flush(struct bcm_op *op)
 static enum hrtimer_restart bcm_rx_thr_handler(struct hrtimer *hrtimer)
 {
 	struct bcm_op *op = container_of(hrtimer, struct bcm_op, thrtimer);
+	enum hrtimer_restart ret;
 
-	if (bcm_rx_thr_flush(op)) {
+	spin_lock_bh(&op->bcm_rx_update_lock);
+
+	/* kt_ival2 may have been concurrently cleared by bcm_rx_setup()
+	 * before it cancels this timer - never forward with a zero
+	 * interval in that case.
+	 */
+	if (bcm_rx_thr_flush(op) && op->kt_ival2) {
 		hrtimer_forward_now(hrtimer, op->kt_ival2);
-		return HRTIMER_RESTART;
+		ret = HRTIMER_RESTART;
 	} else {
 		/* rearm throttle handling */
 		op->kt_lastmsg = 0;
-		return HRTIMER_NORESTART;
+		ret = HRTIMER_NORESTART;
 	}
+
+	spin_unlock_bh(&op->bcm_rx_update_lock);
+
+	return ret;
 }
 
 /*
@@ -704,8 +732,10 @@ static void bcm_rx_handler(struct sk_buff *skb, void *data)
 {
 	struct bcm_op *op = (struct bcm_op *)data;
 	const struct canfd_frame *rxframe = (struct canfd_frame *)skb->data;
+	struct canfd_frame rtrframe;
 	unsigned int i;
 	unsigned char traffic_flags;
+	bool rtr_frame;
 
 	if (op->can_id != rxframe->can_id)
 		return;
@@ -729,9 +759,18 @@ static void bcm_rx_handler(struct sk_buff *skb, void *data)
 	/* update statistics */
 	op->frames_abs++;
 
-	if (op->flags & RX_RTR_FRAME) {
+	/* snapshot the flag under lock: op->flags/op->frames may be updated
+	 * concurrently by bcm_rx_setup().
+	 */
+	spin_lock_bh(&op->bcm_rx_update_lock);
+	rtr_frame = op->flags & RX_RTR_FRAME;
+	if (rtr_frame)
+		memcpy(&rtrframe, op->frames, op->cfsiz);
+	spin_unlock_bh(&op->bcm_rx_update_lock);
+
+	if (rtr_frame) {
 		/* send reply for RTR-request (placed in op->frames[0]) */
-		bcm_can_tx(op);
+		bcm_can_tx(op, &rtrframe);
 		return;
 	}
 
@@ -743,6 +782,8 @@ static void bcm_rx_handler(struct sk_buff *skb, void *data)
 			traffic_flags |= RX_OWN;
 	}
 
+	spin_lock_bh(&op->bcm_rx_update_lock);
+
 	if (op->flags & RX_FILTER_ID) {
 		/* the easiest case */
 		bcm_rx_update_and_send(op, op->last_frames, rxframe,
@@ -778,6 +819,8 @@ static void bcm_rx_handler(struct sk_buff *skb, void *data)
 
 rx_starttimer:
 	bcm_rx_starttimer(op);
+
+	spin_unlock_bh(&op->bcm_rx_update_lock);
 }
 
 /*
@@ -1116,7 +1159,7 @@ static int bcm_tx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg,
 	}
 
 	if (op->flags & TX_ANNOUNCE)
-		bcm_can_tx(op);
+		bcm_can_tx(op, NULL);
 
 	if (op->flags & STARTTIMER)
 		bcm_tx_start_timer(op);
@@ -1130,6 +1173,24 @@ static int bcm_tx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg,
 	return err;
 }
 
+static void bcm_rx_setup_rtr_check(struct bcm_msg_head *msg_head,
+				   struct bcm_op *op, void *new_frames)
+{
+	/* funny feature in RX(!)_SETUP only for RTR-mode:
+	 * copy can_id into frame BUT without RTR-flag to
+	 * prevent a full-load-loopback-test ... ;-]
+	 * normalize this on the staged buffer, before it is
+	 * ever installed into op->frames.
+	 */
+	if (msg_head->flags & RX_RTR_FRAME) {
+		struct canfd_frame *frame0 = new_frames;
+
+		if ((msg_head->flags & TX_CP_CAN_ID) ||
+		    frame0->can_id == op->can_id)
+			frame0->can_id = op->can_id & ~CAN_RTR_FLAG;
+	}
+}
+
 /*
  * bcm_rx_setup - create or update a bcm rx op (for bcm_sendmsg)
  */
@@ -1164,6 +1225,8 @@ static int bcm_rx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg,
 	/* check the given can_id */
 	op = bcm_find_op(&bo->rx_ops, msg_head, ifindex);
 	if (op) {
+		void *new_frames = NULL;
+
 		/* update existing BCM operation */
 
 		/*
@@ -1175,19 +1238,48 @@ static int bcm_rx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg,
 			return -E2BIG;
 
 		if (msg_head->nframes) {
-			/* update CAN frames content */
-			err = memcpy_from_msg(op->frames, msg,
-					      msg_head->nframes * op->cfsiz);
-			if (err < 0)
-				return err;
+			/* get new CAN frames content before locking */
+			new_frames = kmalloc(msg_head->nframes * op->cfsiz,
+					     GFP_KERNEL);
+			if (!new_frames)
+				return -ENOMEM;
 
-			/* clear last_frames to indicate 'nothing received' */
-			memset(op->last_frames, 0, msg_head->nframes * op->cfsiz);
+			err = memcpy_from_msg(new_frames, msg,
+					      msg_head->nframes * op->cfsiz);
+			if (err < 0) {
+				kfree(new_frames);
+				return err;
+			}
+
+			bcm_rx_setup_rtr_check(msg_head, op, new_frames);
 		}
 
+		spin_lock_bh(&op->bcm_rx_update_lock);
 		op->nframes = msg_head->nframes;
 		op->flags = msg_head->flags;
 
+		if (msg_head->nframes) {
+			/* update CAN frames content */
+			memcpy(op->frames, new_frames,
+			       msg_head->nframes * op->cfsiz);
+
+			/* clear last_frames to indicate 'nothing received' */
+			memset(op->last_frames, 0,
+			       msg_head->nframes * op->cfsiz);
+		}
+
+		if (msg_head->flags & SETTIMER) {
+			op->ival1 = msg_head->ival1;
+			op->ival2 = msg_head->ival2;
+			op->kt_ival1 = bcm_timeval_to_ktime(msg_head->ival1);
+			op->kt_ival2 = bcm_timeval_to_ktime(msg_head->ival2);
+			op->kt_lastmsg = 0;
+		}
+		spin_unlock_bh(&op->bcm_rx_update_lock);
+
+		/* free temporary frames / kfree(NULL) is safe */
+		kfree(new_frames);
+
 		/* Only an update -> do not call can_rx_register() */
 		do_rx_register = 0;
 
@@ -1198,6 +1290,7 @@ static int bcm_rx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg,
 			return -ENOMEM;
 
 		spin_lock_init(&op->bcm_tx_lock);
+		spin_lock_init(&op->bcm_rx_update_lock);
 		op->can_id = msg_head->can_id;
 		op->nframes = msg_head->nframes;
 		op->cfsiz = CFSIZ(msg_head->flags);
@@ -1239,6 +1332,8 @@ static int bcm_rx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg,
 				kfree(op);
 				return err;
 			}
+
+			bcm_rx_setup_rtr_check(msg_head, op, op->frames);
 		}
 
 		/* bcm_can_tx / bcm_tx_timeout_handler needs this */
@@ -1266,29 +1361,22 @@ static int bcm_rx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg,
 	/* check flags */
 
 	if (op->flags & RX_RTR_FRAME) {
-		struct canfd_frame *frame0 = op->frames;
-
 		/* no timers in RTR-mode */
 		hrtimer_cancel(&op->thrtimer);
 		hrtimer_cancel(&op->timer);
-
-		/*
-		 * funny feature in RX(!)_SETUP only for RTR-mode:
-		 * copy can_id into frame BUT without RTR-flag to
-		 * prevent a full-load-loopback-test ... ;-]
-		 */
-		if ((op->flags & TX_CP_CAN_ID) ||
-		    (frame0->can_id == op->can_id))
-			frame0->can_id = op->can_id & ~CAN_RTR_FLAG;
-
 	} else {
 		if (op->flags & SETTIMER) {
 
-			/* set timer value */
-			op->ival1 = msg_head->ival1;
-			op->ival2 = msg_head->ival2;
-			op->kt_ival1 = bcm_timeval_to_ktime(msg_head->ival1);
-			op->kt_ival2 = bcm_timeval_to_ktime(msg_head->ival2);
+			/* set timers (locked) for newly created op */
+			if (do_rx_register) {
+				spin_lock_bh(&op->bcm_rx_update_lock);
+				op->ival1 = msg_head->ival1;
+				op->ival2 = msg_head->ival2;
+				op->kt_ival1 = bcm_timeval_to_ktime(msg_head->ival1);
+				op->kt_ival2 = bcm_timeval_to_ktime(msg_head->ival2);
+				op->kt_lastmsg = 0;
+				spin_unlock_bh(&op->bcm_rx_update_lock);
+			}
 
 			/* disable an active timer due to zero value? */
 			if (!op->kt_ival1)
@@ -1298,9 +1386,11 @@ static int bcm_rx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg,
 			 * In any case cancel the throttle timer, flush
 			 * potentially blocked msgs and reset throttle handling
 			 */
-			op->kt_lastmsg = 0;
 			hrtimer_cancel(&op->thrtimer);
+
+			spin_lock_bh(&op->bcm_rx_update_lock);
 			bcm_rx_thr_flush(op);
+			spin_unlock_bh(&op->bcm_rx_update_lock);
 		}
 
 		if ((op->flags & STARTTIMER) && op->kt_ival1)

[PATCH 2/9] can: bcm: add locking when updating filter and timer values

[Oliver Hartkopp]

commit 749179c2e25b95d22499ed29096b3e02d6dfd2b4 upstream.

KCSAN detected a simultaneous access to timer values that can be
overwritten in bcm_rx_setup() when updating timer and filter content
while bcm_rx_handler(), bcm_rx_timeout_handler() or bcm_rx_thr_handler()
run concurrently on incoming CAN traffic.

Protect the timer (ival1/ival2/kt_ival1/kt_ival2/kt_lastmsg) and filter
(nframes/flags/frames/last_frames) updates in bcm_rx_setup() with a new
per-op bcm_rx_update_lock, taken with the matching scope in the RX
handlers. memcpy_from_msg() is staged into a temporary buffer before the
lock is taken, since it can sleep and must not run under a spinlock.

hrtimer_cancel() is always called without bcm_rx_update_lock held, since
bcm_rx_timeout_handler()/bcm_rx_thr_handler() take the same lock and a
running callback would otherwise deadlock against the canceller.

Also close a related race: bcm_rx_setup() cleared the RTR flag in the
stored reply frame's can_id as a separate, unprotected step after the
frame content was already installed, so a concurrent bcm_rx_handler()
could transmit a stale reply with CAN_RTR_FLAG still set. Fold that
normalization into the initial frame preparation instead (on the staged
buffer for updates, directly on op->frames pre-registration for new
ops), so the installed frame is always atomically self-consistent.

bcm_rx_handler()'s RX_RTR_FRAME check now takes a lock-protected
snapshot of op->flags before deciding whether to call bcm_can_tx(),
but does not hold the lock across that call.

Also take a lock-protected snapshot of the currframe in bcm_can_tx()
to avoid partly overwrites by content updates in bcm_tx_setup().
Finally check if a TX_RESET_MULTI_IDX/SETTIMER might have reset
op->currframe between the two locked sections in bcm_can_tx().

Omit calling hrtimer_forward() with zero interval in bcm_rx_thr_handler().
kt_ival2 may have been concurrently cleared by bcm_rx_setup() before it
cancels this timer, so check kt_ival2 inside the bcm_rx_update_lock.

Fixes: c2aba69d0c36 ("can: bcm: add locking for bcm_op runtime updates")
Reported-by: syzbot+75e5e4ae00c3b4bb544e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-can/6975d5cf.a00a0220.33ccc7.0022.GAE@google.com/
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260714-bcm_fixes-v15-3-562f7e3e42da@hartkopp.net
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
---
 net/can/bcm.c | 178 +++++++++++++++++++++++++++++++++++++++++++---------------
 1 file changed, 134 insertions(+), 44 deletions(-)

diff --git a/net/can/bcm.c b/net/can/bcm.c
index 859816d..ffd492a 100644
--- a/net/can/bcm.c
+++ b/net/can/bcm.c
@@ -126,6 +126,7 @@ struct bcm_op {
 	struct sock *sk;
 	struct net_device *rx_reg_dev;
 	spinlock_t bcm_tx_lock; /* protect currframe/count in runtime updates */
+	spinlock_t bcm_rx_update_lock; /* protect filter/timer data updates */
 };
 
 struct bcm_sock {
@@ -280,21 +281,27 @@ static int bcm_proc_show(struct seq_file *m, void *v)
  * bcm_can_tx - send the (next) CAN frame to the appropriate CAN interface
  *              of the given bcm tx op
  */
-static void bcm_can_tx(struct bcm_op *op)
+static void bcm_can_tx(struct bcm_op *op, struct canfd_frame *cf)
 {
 	struct sk_buff *skb;
 	struct net_device *dev;
-	struct canfd_frame *cf;
+	struct canfd_frame cframe;
+	bool cyclic = !cf;
+	unsigned int idx = 0;
 	int err;
 
 	/* no target device? => exit */
 	if (!op->ifindex)
 		return;
 
-	/* read currframe under lock protection */
-	spin_lock_bh(&op->bcm_tx_lock);
-	cf = op->frames + op->cfsiz * op->currframe;
-	spin_unlock_bh(&op->bcm_tx_lock);
+	if (cyclic) {
+		/* read currframe under lock protection */
+		spin_lock_bh(&op->bcm_tx_lock);
+		idx = op->currframe;
+		memcpy(&cframe, op->frames + op->cfsiz * idx, op->cfsiz);
+		cf = &cframe;
+		spin_unlock_bh(&op->bcm_tx_lock);
+	}
 
 	dev = dev_get_by_index(sock_net(op->sk), op->ifindex);
 	if (!dev) {
@@ -323,14 +330,20 @@ static void bcm_can_tx(struct bcm_op *op)
 	if (!err)
 		op->frames_abs++;
 
-	op->currframe++;
+	/* only advance the cyclic sequence if nothing reset currframe while
+	 * we were sending - a concurrent TX_RESET_MULTI_IDX means this
+	 * frame's bookkeeping belongs to a sequence that no longer exists
+	 */
+	if (!cyclic || op->currframe == idx) {
+		op->currframe++;
 
-	/* reached last frame? */
-	if (op->currframe >= op->nframes)
-		op->currframe = 0;
+		/* reached last frame? */
+		if (op->currframe >= op->nframes)
+			op->currframe = 0;
 
-	if (op->count > 0)
-		op->count--;
+		if (op->count > 0)
+			op->count--;
+	}
 
 	spin_unlock_bh(&op->bcm_tx_lock);
 out:
@@ -429,7 +442,7 @@ static enum hrtimer_restart bcm_tx_timeout_handler(struct hrtimer *hrtimer)
 	struct bcm_msg_head msg_head;
 
 	if (op->kt_ival1 && (op->count > 0)) {
-		bcm_can_tx(op);
+		bcm_can_tx(op, NULL);
 		if (!op->count && (op->flags & TX_COUNTEVT)) {
 
 			/* create notification to user */
@@ -446,7 +459,7 @@ static enum hrtimer_restart bcm_tx_timeout_handler(struct hrtimer *hrtimer)
 		}
 
 	} else if (op->kt_ival2) {
-		bcm_can_tx(op);
+		bcm_can_tx(op, NULL);
 	}
 
 	return bcm_tx_set_expiry(op, &op->timer) ?
@@ -585,6 +598,8 @@ static enum hrtimer_restart bcm_rx_timeout_handler(struct hrtimer *hrtimer)
 	struct bcm_op *op = container_of(hrtimer, struct bcm_op, timer);
 	struct bcm_msg_head msg_head;
 
+	spin_lock_bh(&op->bcm_rx_update_lock);
+
 	/* if user wants to be informed, when cyclic CAN-Messages come back */
 	if ((op->flags & RX_ANNOUNCE_RESUME) && op->last_frames) {
 		/* clear received CAN frames to indicate 'nothing received' */
@@ -601,6 +616,8 @@ static enum hrtimer_restart bcm_rx_timeout_handler(struct hrtimer *hrtimer)
 	msg_head.can_id  = op->can_id;
 	msg_head.nframes = 0;
 
+	spin_unlock_bh(&op->bcm_rx_update_lock);
+
 	bcm_send_to_user(op, &msg_head, NULL, 0);
 
 	return HRTIMER_NORESTART;
@@ -649,15 +666,26 @@ static int bcm_rx_thr_flush(struct bcm_op *op)
 static enum hrtimer_restart bcm_rx_thr_handler(struct hrtimer *hrtimer)
 {
 	struct bcm_op *op = container_of(hrtimer, struct bcm_op, thrtimer);
+	enum hrtimer_restart ret;
 
-	if (bcm_rx_thr_flush(op)) {
-		hrtimer_forward(hrtimer, ktime_get(), op->kt_ival2);
-		return HRTIMER_RESTART;
+	spin_lock_bh(&op->bcm_rx_update_lock);
+
+	/* kt_ival2 may have been concurrently cleared by bcm_rx_setup()
+	 * before it cancels this timer - never forward with a zero
+	 * interval in that case.
+	 */
+	if (bcm_rx_thr_flush(op) && op->kt_ival2) {
+		hrtimer_forward_now(hrtimer, op->kt_ival2);
+		ret = HRTIMER_RESTART;
 	} else {
 		/* rearm throttle handling */
 		op->kt_lastmsg = 0;
-		return HRTIMER_NORESTART;
+		ret = HRTIMER_NORESTART;
 	}
+
+	spin_unlock_bh(&op->bcm_rx_update_lock);
+
+	return ret;
 }
 
 /*
@@ -667,7 +695,9 @@ static void bcm_rx_handler(struct sk_buff *skb, void *data)
 {
 	struct bcm_op *op = (struct bcm_op *)data;
 	const struct canfd_frame *rxframe = (struct canfd_frame *)skb->data;
+	struct canfd_frame rtrframe;
 	unsigned int i;
+	bool rtr_frame;
 
 	if (op->can_id != rxframe->can_id)
 		return;
@@ -686,12 +716,23 @@ static void bcm_rx_handler(struct sk_buff *skb, void *data)
 	/* update statistics */
 	op->frames_abs++;
 
-	if (op->flags & RX_RTR_FRAME) {
+	/* snapshot the flag under lock: op->flags/op->frames may be updated
+	 * concurrently by bcm_rx_setup().
+	 */
+	spin_lock_bh(&op->bcm_rx_update_lock);
+	rtr_frame = op->flags & RX_RTR_FRAME;
+	if (rtr_frame)
+		memcpy(&rtrframe, op->frames, op->cfsiz);
+	spin_unlock_bh(&op->bcm_rx_update_lock);
+
+	if (rtr_frame) {
 		/* send reply for RTR-request (placed in op->frames[0]) */
-		bcm_can_tx(op);
+		bcm_can_tx(op, &rtrframe);
 		return;
 	}
 
+	spin_lock_bh(&op->bcm_rx_update_lock);
+
 	if (op->flags & RX_FILTER_ID) {
 		/* the easiest case */
 		bcm_rx_update_and_send(op, op->last_frames, rxframe);
@@ -725,6 +766,8 @@ static void bcm_rx_handler(struct sk_buff *skb, void *data)
 
 rx_starttimer:
 	bcm_rx_starttimer(op);
+
+	spin_unlock_bh(&op->bcm_rx_update_lock);
 }
 
 /*
@@ -1068,7 +1111,7 @@ static int bcm_tx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg,
 		list_add_rcu(&op->list, &bo->tx_ops);
 
 	if (op->flags & TX_ANNOUNCE)
-		bcm_can_tx(op);
+		bcm_can_tx(op, NULL);
 
 	if (op->flags & STARTTIMER)
 		bcm_tx_start_timer(op);
@@ -1082,6 +1125,24 @@ free_op:
 	return err;
 }
 
+static void bcm_rx_setup_rtr_check(struct bcm_msg_head *msg_head,
+				   struct bcm_op *op, void *new_frames)
+{
+	/* funny feature in RX(!)_SETUP only for RTR-mode:
+	 * copy can_id into frame BUT without RTR-flag to
+	 * prevent a full-load-loopback-test ... ;-]
+	 * normalize this on the staged buffer, before it is
+	 * ever installed into op->frames.
+	 */
+	if (msg_head->flags & RX_RTR_FRAME) {
+		struct canfd_frame *frame0 = new_frames;
+
+		if ((msg_head->flags & TX_CP_CAN_ID) ||
+		    frame0->can_id == op->can_id)
+			frame0->can_id = op->can_id & ~CAN_RTR_FLAG;
+	}
+}
+
 /*
  * bcm_rx_setup - create or update a bcm rx op (for bcm_sendmsg)
  */
@@ -1116,6 +1177,8 @@ static int bcm_rx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg,
 	/* check the given can_id */
 	op = bcm_find_op(&bo->rx_ops, msg_head, ifindex);
 	if (op) {
+		void *new_frames = NULL;
+
 		/* update existing BCM operation */
 
 		/*
@@ -1127,19 +1190,48 @@ static int bcm_rx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg,
 			return -E2BIG;
 
 		if (msg_head->nframes) {
-			/* update CAN frames content */
-			err = memcpy_from_msg(op->frames, msg,
+			/* get new CAN frames content before locking */
+			new_frames = kmalloc(msg_head->nframes * op->cfsiz,
+					     GFP_KERNEL);
+			if (!new_frames)
+				return -ENOMEM;
+
+			err = memcpy_from_msg(new_frames, msg,
 					      msg_head->nframes * op->cfsiz);
-			if (err < 0)
+			if (err < 0) {
+				kfree(new_frames);
 				return err;
+			}
 
-			/* clear last_frames to indicate 'nothing received' */
-			memset(op->last_frames, 0, msg_head->nframes * op->cfsiz);
+			bcm_rx_setup_rtr_check(msg_head, op, new_frames);
 		}
 
+		spin_lock_bh(&op->bcm_rx_update_lock);
 		op->nframes = msg_head->nframes;
 		op->flags = msg_head->flags;
 
+		if (msg_head->nframes) {
+			/* update CAN frames content */
+			memcpy(op->frames, new_frames,
+			       msg_head->nframes * op->cfsiz);
+
+			/* clear last_frames to indicate 'nothing received' */
+			memset(op->last_frames, 0,
+			       msg_head->nframes * op->cfsiz);
+		}
+
+		if (msg_head->flags & SETTIMER) {
+			op->ival1 = msg_head->ival1;
+			op->ival2 = msg_head->ival2;
+			op->kt_ival1 = bcm_timeval_to_ktime(msg_head->ival1);
+			op->kt_ival2 = bcm_timeval_to_ktime(msg_head->ival2);
+			op->kt_lastmsg = 0;
+		}
+		spin_unlock_bh(&op->bcm_rx_update_lock);
+
+		/* free temporary frames / kfree(NULL) is safe */
+		kfree(new_frames);
+
 		/* Only an update -> do not call can_rx_register() */
 		do_rx_register = 0;
 
@@ -1150,6 +1242,7 @@ static int bcm_rx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg,
 			return -ENOMEM;
 
 		spin_lock_init(&op->bcm_tx_lock);
+		spin_lock_init(&op->bcm_rx_update_lock);
 		op->can_id = msg_head->can_id;
 		op->nframes = msg_head->nframes;
 		op->cfsiz = CFSIZ(msg_head->flags);
@@ -1191,6 +1284,8 @@ static int bcm_rx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg,
 				kfree(op);
 				return err;
 			}
+
+			bcm_rx_setup_rtr_check(msg_head, op, op->frames);
 		}
 
 		/* bcm_can_tx / bcm_tx_timeout_handler needs this */
@@ -1218,29 +1313,22 @@ static int bcm_rx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg,
 	/* check flags */
 
 	if (op->flags & RX_RTR_FRAME) {
-		struct canfd_frame *frame0 = op->frames;
-
 		/* no timers in RTR-mode */
 		hrtimer_cancel(&op->thrtimer);
 		hrtimer_cancel(&op->timer);
-
-		/*
-		 * funny feature in RX(!)_SETUP only for RTR-mode:
-		 * copy can_id into frame BUT without RTR-flag to
-		 * prevent a full-load-loopback-test ... ;-]
-		 */
-		if ((op->flags & TX_CP_CAN_ID) ||
-		    (frame0->can_id == op->can_id))
-			frame0->can_id = op->can_id & ~CAN_RTR_FLAG;
-
 	} else {
 		if (op->flags & SETTIMER) {
 
-			/* set timer value */
-			op->ival1 = msg_head->ival1;
-			op->ival2 = msg_head->ival2;
-			op->kt_ival1 = bcm_timeval_to_ktime(msg_head->ival1);
-			op->kt_ival2 = bcm_timeval_to_ktime(msg_head->ival2);
+			/* set timers (locked) for newly created op */
+			if (do_rx_register) {
+				spin_lock_bh(&op->bcm_rx_update_lock);
+				op->ival1 = msg_head->ival1;
+				op->ival2 = msg_head->ival2;
+				op->kt_ival1 = bcm_timeval_to_ktime(msg_head->ival1);
+				op->kt_ival2 = bcm_timeval_to_ktime(msg_head->ival2);
+				op->kt_lastmsg = 0;
+				spin_unlock_bh(&op->bcm_rx_update_lock);
+			}
 
 			/* disable an active timer due to zero value? */
 			if (!op->kt_ival1)
@@ -1250,9 +1338,11 @@ static int bcm_rx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg,
 			 * In any case cancel the throttle timer, flush
 			 * potentially blocked msgs and reset throttle handling
 			 */
-			op->kt_lastmsg = 0;
 			hrtimer_cancel(&op->thrtimer);
+
+			spin_lock_bh(&op->bcm_rx_update_lock);
 			bcm_rx_thr_flush(op);
+			spin_unlock_bh(&op->bcm_rx_update_lock);
 		}
 
 		if ((op->flags & STARTTIMER) && op->kt_ival1)
-- 
2.43.0

[PATCH 2/9] can: bcm: add locking when updating filter and timer values

[Oliver Hartkopp]

commit 749179c2e25b95d22499ed29096b3e02d6dfd2b4 upstream.

KCSAN detected a simultaneous access to timer values that can be
overwritten in bcm_rx_setup() when updating timer and filter content
while bcm_rx_handler(), bcm_rx_timeout_handler() or bcm_rx_thr_handler()
run concurrently on incoming CAN traffic.

Protect the timer (ival1/ival2/kt_ival1/kt_ival2/kt_lastmsg) and filter
(nframes/flags/frames/last_frames) updates in bcm_rx_setup() with a new
per-op bcm_rx_update_lock, taken with the matching scope in the RX
handlers. memcpy_from_msg() is staged into a temporary buffer before the
lock is taken, since it can sleep and must not run under a spinlock.

hrtimer_cancel() is always called without bcm_rx_update_lock held, since
bcm_rx_timeout_handler()/bcm_rx_thr_handler() take the same lock and a
running callback would otherwise deadlock against the canceller.

Also close a related race: bcm_rx_setup() cleared the RTR flag in the
stored reply frame's can_id as a separate, unprotected step after the
frame content was already installed, so a concurrent bcm_rx_handler()
could transmit a stale reply with CAN_RTR_FLAG still set. Fold that
normalization into the initial frame preparation instead (on the staged
buffer for updates, directly on op->frames pre-registration for new
ops), so the installed frame is always atomically self-consistent.

bcm_rx_handler()'s RX_RTR_FRAME check now takes a lock-protected
snapshot of op->flags before deciding whether to call bcm_can_tx(),
but does not hold the lock across that call.

Also take a lock-protected snapshot of the currframe in bcm_can_tx()
to avoid partly overwrites by content updates in bcm_tx_setup().
Finally check if a TX_RESET_MULTI_IDX/SETTIMER might have reset
op->currframe between the two locked sections in bcm_can_tx().

Omit calling hrtimer_forward() with zero interval in bcm_rx_thr_handler().
kt_ival2 may have been concurrently cleared by bcm_rx_setup() before it
cancels this timer, so check kt_ival2 inside the bcm_rx_update_lock.

Fixes: c2aba69d0c36 ("can: bcm: add locking for bcm_op runtime updates")
Reported-by: syzbot+75e5e4ae00c3b4bb544e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-can/6975d5cf.a00a0220.33ccc7.0022.GAE@google.com/
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260714-bcm_fixes-v15-3-562f7e3e42da@hartkopp.net
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
---
 net/can/bcm.c | 178 +++++++++++++++++++++++++++++++++++++++++++---------------
 1 file changed, 134 insertions(+), 44 deletions(-)

diff --git a/net/can/bcm.c b/net/can/bcm.c
index 05ef139..b03065a 100644
--- a/net/can/bcm.c
+++ b/net/can/bcm.c
@@ -126,6 +126,7 @@ struct bcm_op {
 	struct sock *sk;
 	struct net_device *rx_reg_dev;
 	spinlock_t bcm_tx_lock; /* protect currframe/count in runtime updates */
+	spinlock_t bcm_rx_update_lock; /* protect filter/timer data updates */
 };
 
 struct bcm_sock {
@@ -280,21 +281,27 @@ static int bcm_proc_show(struct seq_file *m, void *v)
  * bcm_can_tx - send the (next) CAN frame to the appropriate CAN interface
  *              of the given bcm tx op
  */
-static void bcm_can_tx(struct bcm_op *op)
+static void bcm_can_tx(struct bcm_op *op, struct canfd_frame *cf)
 {
 	struct sk_buff *skb;
 	struct net_device *dev;
-	struct canfd_frame *cf;
+	struct canfd_frame cframe;
+	bool cyclic = !cf;
+	unsigned int idx = 0;
 	int err;
 
 	/* no target device? => exit */
 	if (!op->ifindex)
 		return;
 
-	/* read currframe under lock protection */
-	spin_lock_bh(&op->bcm_tx_lock);
-	cf = op->frames + op->cfsiz * op->currframe;
-	spin_unlock_bh(&op->bcm_tx_lock);
+	if (cyclic) {
+		/* read currframe under lock protection */
+		spin_lock_bh(&op->bcm_tx_lock);
+		idx = op->currframe;
+		memcpy(&cframe, op->frames + op->cfsiz * idx, op->cfsiz);
+		cf = &cframe;
+		spin_unlock_bh(&op->bcm_tx_lock);
+	}
 
 	dev = dev_get_by_index(sock_net(op->sk), op->ifindex);
 	if (!dev) {
@@ -323,14 +330,20 @@ static void bcm_can_tx(struct bcm_op *op)
 	if (!err)
 		op->frames_abs++;
 
-	op->currframe++;
+	/* only advance the cyclic sequence if nothing reset currframe while
+	 * we were sending - a concurrent TX_RESET_MULTI_IDX means this
+	 * frame's bookkeeping belongs to a sequence that no longer exists
+	 */
+	if (!cyclic || op->currframe == idx) {
+		op->currframe++;
 
-	/* reached last frame? */
-	if (op->currframe >= op->nframes)
-		op->currframe = 0;
+		/* reached last frame? */
+		if (op->currframe >= op->nframes)
+			op->currframe = 0;
 
-	if (op->count > 0)
-		op->count--;
+		if (op->count > 0)
+			op->count--;
+	}
 
 	spin_unlock_bh(&op->bcm_tx_lock);
 out:
@@ -429,7 +442,7 @@ static enum hrtimer_restart bcm_tx_timeout_handler(struct hrtimer *hrtimer)
 	struct bcm_msg_head msg_head;
 
 	if (op->kt_ival1 && (op->count > 0)) {
-		bcm_can_tx(op);
+		bcm_can_tx(op, NULL);
 		if (!op->count && (op->flags & TX_COUNTEVT)) {
 
 			/* create notification to user */
@@ -446,7 +459,7 @@ static enum hrtimer_restart bcm_tx_timeout_handler(struct hrtimer *hrtimer)
 		}
 
 	} else if (op->kt_ival2) {
-		bcm_can_tx(op);
+		bcm_can_tx(op, NULL);
 	}
 
 	return bcm_tx_set_expiry(op, &op->timer) ?
@@ -585,6 +598,8 @@ static enum hrtimer_restart bcm_rx_timeout_handler(struct hrtimer *hrtimer)
 	struct bcm_op *op = container_of(hrtimer, struct bcm_op, timer);
 	struct bcm_msg_head msg_head;
 
+	spin_lock_bh(&op->bcm_rx_update_lock);
+
 	/* if user wants to be informed, when cyclic CAN-Messages come back */
 	if ((op->flags & RX_ANNOUNCE_RESUME) && op->last_frames) {
 		/* clear received CAN frames to indicate 'nothing received' */
@@ -601,6 +616,8 @@ static enum hrtimer_restart bcm_rx_timeout_handler(struct hrtimer *hrtimer)
 	msg_head.can_id  = op->can_id;
 	msg_head.nframes = 0;
 
+	spin_unlock_bh(&op->bcm_rx_update_lock);
+
 	bcm_send_to_user(op, &msg_head, NULL, 0);
 
 	return HRTIMER_NORESTART;
@@ -649,15 +666,26 @@ static int bcm_rx_thr_flush(struct bcm_op *op)
 static enum hrtimer_restart bcm_rx_thr_handler(struct hrtimer *hrtimer)
 {
 	struct bcm_op *op = container_of(hrtimer, struct bcm_op, thrtimer);
+	enum hrtimer_restart ret;
 
-	if (bcm_rx_thr_flush(op)) {
-		hrtimer_forward(hrtimer, ktime_get(), op->kt_ival2);
-		return HRTIMER_RESTART;
+	spin_lock_bh(&op->bcm_rx_update_lock);
+
+	/* kt_ival2 may have been concurrently cleared by bcm_rx_setup()
+	 * before it cancels this timer - never forward with a zero
+	 * interval in that case.
+	 */
+	if (bcm_rx_thr_flush(op) && op->kt_ival2) {
+		hrtimer_forward_now(hrtimer, op->kt_ival2);
+		ret = HRTIMER_RESTART;
 	} else {
 		/* rearm throttle handling */
 		op->kt_lastmsg = 0;
-		return HRTIMER_NORESTART;
+		ret = HRTIMER_NORESTART;
 	}
+
+	spin_unlock_bh(&op->bcm_rx_update_lock);
+
+	return ret;
 }
 
 /*
@@ -667,7 +695,9 @@ static void bcm_rx_handler(struct sk_buff *skb, void *data)
 {
 	struct bcm_op *op = (struct bcm_op *)data;
 	const struct canfd_frame *rxframe = (struct canfd_frame *)skb->data;
+	struct canfd_frame rtrframe;
 	unsigned int i;
+	bool rtr_frame;
 
 	if (op->can_id != rxframe->can_id)
 		return;
@@ -686,12 +716,23 @@ static void bcm_rx_handler(struct sk_buff *skb, void *data)
 	/* update statistics */
 	op->frames_abs++;
 
-	if (op->flags & RX_RTR_FRAME) {
+	/* snapshot the flag under lock: op->flags/op->frames may be updated
+	 * concurrently by bcm_rx_setup().
+	 */
+	spin_lock_bh(&op->bcm_rx_update_lock);
+	rtr_frame = op->flags & RX_RTR_FRAME;
+	if (rtr_frame)
+		memcpy(&rtrframe, op->frames, op->cfsiz);
+	spin_unlock_bh(&op->bcm_rx_update_lock);
+
+	if (rtr_frame) {
 		/* send reply for RTR-request (placed in op->frames[0]) */
-		bcm_can_tx(op);
+		bcm_can_tx(op, &rtrframe);
 		return;
 	}
 
+	spin_lock_bh(&op->bcm_rx_update_lock);
+
 	if (op->flags & RX_FILTER_ID) {
 		/* the easiest case */
 		bcm_rx_update_and_send(op, op->last_frames, rxframe);
@@ -725,6 +766,8 @@ static void bcm_rx_handler(struct sk_buff *skb, void *data)
 
 rx_starttimer:
 	bcm_rx_starttimer(op);
+
+	spin_unlock_bh(&op->bcm_rx_update_lock);
 }
 
 /*
@@ -1068,7 +1111,7 @@ static int bcm_tx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg,
 		list_add_rcu(&op->list, &bo->tx_ops);
 
 	if (op->flags & TX_ANNOUNCE)
-		bcm_can_tx(op);
+		bcm_can_tx(op, NULL);
 
 	if (op->flags & STARTTIMER)
 		bcm_tx_start_timer(op);
@@ -1082,6 +1125,24 @@ free_op:
 	return err;
 }
 
+static void bcm_rx_setup_rtr_check(struct bcm_msg_head *msg_head,
+				   struct bcm_op *op, void *new_frames)
+{
+	/* funny feature in RX(!)_SETUP only for RTR-mode:
+	 * copy can_id into frame BUT without RTR-flag to
+	 * prevent a full-load-loopback-test ... ;-]
+	 * normalize this on the staged buffer, before it is
+	 * ever installed into op->frames.
+	 */
+	if (msg_head->flags & RX_RTR_FRAME) {
+		struct canfd_frame *frame0 = new_frames;
+
+		if ((msg_head->flags & TX_CP_CAN_ID) ||
+		    frame0->can_id == op->can_id)
+			frame0->can_id = op->can_id & ~CAN_RTR_FLAG;
+	}
+}
+
 /*
  * bcm_rx_setup - create or update a bcm rx op (for bcm_sendmsg)
  */
@@ -1116,6 +1177,8 @@ static int bcm_rx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg,
 	/* check the given can_id */
 	op = bcm_find_op(&bo->rx_ops, msg_head, ifindex);
 	if (op) {
+		void *new_frames = NULL;
+
 		/* update existing BCM operation */
 
 		/*
@@ -1127,19 +1190,48 @@ static int bcm_rx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg,
 			return -E2BIG;
 
 		if (msg_head->nframes) {
-			/* update CAN frames content */
-			err = memcpy_from_msg(op->frames, msg,
+			/* get new CAN frames content before locking */
+			new_frames = kmalloc(msg_head->nframes * op->cfsiz,
+					     GFP_KERNEL);
+			if (!new_frames)
+				return -ENOMEM;
+
+			err = memcpy_from_msg(new_frames, msg,
 					      msg_head->nframes * op->cfsiz);
-			if (err < 0)
+			if (err < 0) {
+				kfree(new_frames);
 				return err;
+			}
 
-			/* clear last_frames to indicate 'nothing received' */
-			memset(op->last_frames, 0, msg_head->nframes * op->cfsiz);
+			bcm_rx_setup_rtr_check(msg_head, op, new_frames);
 		}
 
+		spin_lock_bh(&op->bcm_rx_update_lock);
 		op->nframes = msg_head->nframes;
 		op->flags = msg_head->flags;
 
+		if (msg_head->nframes) {
+			/* update CAN frames content */
+			memcpy(op->frames, new_frames,
+			       msg_head->nframes * op->cfsiz);
+
+			/* clear last_frames to indicate 'nothing received' */
+			memset(op->last_frames, 0,
+			       msg_head->nframes * op->cfsiz);
+		}
+
+		if (msg_head->flags & SETTIMER) {
+			op->ival1 = msg_head->ival1;
+			op->ival2 = msg_head->ival2;
+			op->kt_ival1 = bcm_timeval_to_ktime(msg_head->ival1);
+			op->kt_ival2 = bcm_timeval_to_ktime(msg_head->ival2);
+			op->kt_lastmsg = 0;
+		}
+		spin_unlock_bh(&op->bcm_rx_update_lock);
+
+		/* free temporary frames / kfree(NULL) is safe */
+		kfree(new_frames);
+
 		/* Only an update -> do not call can_rx_register() */
 		do_rx_register = 0;
 
@@ -1150,6 +1242,7 @@ static int bcm_rx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg,
 			return -ENOMEM;
 
 		spin_lock_init(&op->bcm_tx_lock);
+		spin_lock_init(&op->bcm_rx_update_lock);
 		op->can_id = msg_head->can_id;
 		op->nframes = msg_head->nframes;
 		op->cfsiz = CFSIZ(msg_head->flags);
@@ -1191,6 +1284,8 @@ static int bcm_rx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg,
 				kfree(op);
 				return err;
 			}
+
+			bcm_rx_setup_rtr_check(msg_head, op, op->frames);
 		}
 
 		/* bcm_can_tx / bcm_tx_timeout_handler needs this */
@@ -1218,29 +1313,22 @@ static int bcm_rx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg,
 	/* check flags */
 
 	if (op->flags & RX_RTR_FRAME) {
-		struct canfd_frame *frame0 = op->frames;
-
 		/* no timers in RTR-mode */
 		hrtimer_cancel(&op->thrtimer);
 		hrtimer_cancel(&op->timer);
-
-		/*
-		 * funny feature in RX(!)_SETUP only for RTR-mode:
-		 * copy can_id into frame BUT without RTR-flag to
-		 * prevent a full-load-loopback-test ... ;-]
-		 */
-		if ((op->flags & TX_CP_CAN_ID) ||
-		    (frame0->can_id == op->can_id))
-			frame0->can_id = op->can_id & ~CAN_RTR_FLAG;
-
 	} else {
 		if (op->flags & SETTIMER) {
 
-			/* set timer value */
-			op->ival1 = msg_head->ival1;
-			op->ival2 = msg_head->ival2;
-			op->kt_ival1 = bcm_timeval_to_ktime(msg_head->ival1);
-			op->kt_ival2 = bcm_timeval_to_ktime(msg_head->ival2);
+			/* set timers (locked) for newly created op */
+			if (do_rx_register) {
+				spin_lock_bh(&op->bcm_rx_update_lock);
+				op->ival1 = msg_head->ival1;
+				op->ival2 = msg_head->ival2;
+				op->kt_ival1 = bcm_timeval_to_ktime(msg_head->ival1);
+				op->kt_ival2 = bcm_timeval_to_ktime(msg_head->ival2);
+				op->kt_lastmsg = 0;
+				spin_unlock_bh(&op->bcm_rx_update_lock);
+			}
 
 			/* disable an active timer due to zero value? */
 			if (!op->kt_ival1)
@@ -1250,9 +1338,11 @@ static int bcm_rx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg,
 			 * In any case cancel the throttle timer, flush
 			 * potentially blocked msgs and reset throttle handling
 			 */
-			op->kt_lastmsg = 0;
 			hrtimer_cancel(&op->thrtimer);
+
+			spin_lock_bh(&op->bcm_rx_update_lock);
 			bcm_rx_thr_flush(op);
+			spin_unlock_bh(&op->bcm_rx_update_lock);
 		}
 
 		if ((op->flags & STARTTIMER) && op->kt_ival1)
-- 
2.43.0

[PATCH 5.15.y v2 1/9] can: bcm: defer rx_op deallocation to workqueue to fix thrtimer UAF

[Oliver Hartkopp]

From: Lee Jones <lee@kernel.org>

commit 68973f9db76144825e4f35dfdc80fb8279eb2d57 upstream.

Commit f1b4e32aca08 ("can: bcm: use call_rcu() instead of costly
synchronize_rcu()") replaced synchronize_rcu() in bcm_delete_rx_op()
with call_rcu() and introduced the RX_NO_AUTOTIMER flag.

However, this flag check was omitted for thrtimer in the packet rx
fast-path. During BCM RX operation teardown, a concurrent RCU reader
(bcm_rx_handler) can race and re-arm thrtimer via
bcm_rx_update_and_send() after call_rcu() has been scheduled.  Once
the RCU grace period elapses, bcm_op is freed.  The subsequently
firing thrtimer then dereferences the deallocated op, causing a UAF.

Adding flag checks to the rx fast-path (bcm_rx_update_and_send) does not
fully close the TOCTOU race and introduces latency for every CAN frame.
Conversely, calling hrtimer_cancel() directly inside the RCU callback
(softirq context) is fatal as hrtimer_cancel() can sleep, triggering
a "scheduling while atomic" panic.

Resolve this by deferring the timer cancellation and memory free to a
dedicated unbound workqueue (bcm_wq).  The RCU callback now queues a
work item to bcm_wq, which safely cancels both timers and deallocates
memory in sleepable process context.  A dedicated workqueue is used to
prevent system-wide WQ saturation and is cleanly flushed/destroyed
on module unload to avoid rmmod page faults.

Since the deferred work can now outlive the calling context by an
unbounded amount, also take a reference on op->sk when it is assigned
and drop it only once the deferred work has cancelled both timers, so a
socket can no longer be freed out from under a still-armed timer whose
callback (bcm_send_to_user()) dereferences op->sk.

Fixes: f1b4e32aca08 ("can: bcm: use call_rcu() instead of costly synchronize_rcu()")
Tested-by: Feng Xue <feng.xue@outlook.com>
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260714-bcm_fixes-v15-1-562f7e3e42da@hartkopp.net
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
---
 net/can/bcm.c | 34 ++++++++++++++++++++++++++++++++--
 1 file changed, 32 insertions(+), 2 deletions(-)

diff --git a/net/can/bcm.c b/net/can/bcm.c
index 317cd4c415ba..ca0f5d0c4e9b 100644
--- a/net/can/bcm.c
+++ b/net/can/bcm.c
@@ -56,10 +56,11 @@
 #include <linux/can.h>
 #include <linux/can/core.h>
 #include <linux/can/skb.h>
 #include <linux/can/bcm.h>
 #include <linux/slab.h>
+#include <linux/workqueue.h>
 #include <linux/spinlock.h>
 #include <net/sock.h>
 #include <net/net_namespace.h>
 
 /*
@@ -87,10 +88,12 @@ MODULE_LICENSE("Dual BSD/GPL");
 MODULE_AUTHOR("Oliver Hartkopp <oliver.hartkopp@volkswagen.de>");
 MODULE_ALIAS("can-proto-2");
 
 #define BCM_MIN_NAMELEN CAN_REQUIRED_SIZE(struct sockaddr_can, can_ifindex)
 
+static struct workqueue_struct *bcm_wq;
+
 /*
  * easy access to the first 64 bit of can(fd)_frame payload. cp->data is
  * 64 bit aligned so the offset has to be multiples of 8 which is ensured
  * by the only callers in bcm_rx_cmp_to_index() bcm_rx_handler().
  */
@@ -100,10 +103,11 @@ static inline u64 get_u64(const struct canfd_frame *cp, int offset)
 }
 
 struct bcm_op {
 	struct list_head list;
 	struct rcu_head rcu;
+	struct work_struct work;
 	int ifindex;
 	canid_t can_id;
 	u32 flags;
 	unsigned long frames_abs, frames_filtered;
 	struct bcm_timeval ival1, ival2;
@@ -738,23 +742,40 @@ static struct bcm_op *bcm_find_op(struct list_head *ops,
 	}
 
 	return NULL;
 }
 
-static void bcm_free_op_rcu(struct rcu_head *rcu_head)
+static void bcm_free_op_work(struct work_struct *work)
 {
-	struct bcm_op *op = container_of(rcu_head, struct bcm_op, rcu);
+	struct bcm_op *op = container_of(work, struct bcm_op, work);
+
+	hrtimer_cancel(&op->timer);
+	hrtimer_cancel(&op->thrtimer);
 
 	if ((op->frames) && (op->frames != &op->sframe))
 		kfree(op->frames);
 
 	if ((op->last_frames) && (op->last_frames != &op->last_sframe))
 		kfree(op->last_frames);
 
+	/* the last possible access to op->timer/op->thrtimer has now
+	 * happened above via hrtimer_cancel() - op->sk is no longer
+	 * needed by any pending timer callback, so drop our reference
+	 */
+	sock_put(op->sk);
+
 	kfree(op);
 }
 
+static void bcm_free_op_rcu(struct rcu_head *rcu_head)
+{
+	struct bcm_op *op = container_of(rcu_head, struct bcm_op, rcu);
+
+	INIT_WORK(&op->work, bcm_free_op_work);
+	queue_work(bcm_wq, &op->work);
+}
+
 static void bcm_remove_op(struct bcm_op *op)
 {
 	hrtimer_cancel(&op->timer);
 	hrtimer_cancel(&op->thrtimer);
 
@@ -1006,10 +1027,11 @@ static int bcm_tx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg,
 		/* tx_ops never compare with previous received messages */
 		op->last_frames = NULL;
 
 		/* bcm_can_tx / bcm_tx_timeout_handler needs this */
 		op->sk = sk;
+		sock_hold(sk);
 		op->ifindex = ifindex;
 
 		/* initialize uninitialized (kzalloc) structure */
 		hrtimer_init(&op->timer, CLOCK_MONOTONIC,
 			     HRTIMER_MODE_REL_SOFT);
@@ -1171,10 +1193,11 @@ static int bcm_rx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg,
 			}
 		}
 
 		/* bcm_can_tx / bcm_tx_timeout_handler needs this */
 		op->sk = sk;
+		sock_hold(sk);
 		op->ifindex = ifindex;
 
 		/* ifindex for timeout events w/o previous frame reception */
 		op->rx_ifindex = ifindex;
 
@@ -1828,15 +1851,20 @@ static struct notifier_block canbcm_notifier = {
 
 static int __init bcm_module_init(void)
 {
 	int err;
 
+	bcm_wq = alloc_workqueue("can-bcm-wq", WQ_UNBOUND, 0);
+	if (!bcm_wq)
+		return -ENOMEM;
+
 	pr_info("can: broadcast manager protocol\n");
 
 	err = can_proto_register(&bcm_can_proto);
 	if (err < 0) {
 		printk(KERN_ERR "can: registration of bcm protocol failed\n");
+		destroy_workqueue(bcm_wq);
 		return err;
 	}
 
 	register_pernet_subsys(&canbcm_pernet_ops);
 	register_netdevice_notifier(&canbcm_notifier);
@@ -1846,9 +1874,11 @@ static int __init bcm_module_init(void)
 static void __exit bcm_module_exit(void)
 {
 	can_proto_unregister(&bcm_can_proto);
 	unregister_netdevice_notifier(&canbcm_notifier);
 	unregister_pernet_subsys(&canbcm_pernet_ops);
+	rcu_barrier();
+	destroy_workqueue(bcm_wq);
 }
 
 module_init(bcm_module_init);
 module_exit(bcm_module_exit);
-- 
2.53.0

Re: [PATCH 5.15.y v2 1/9] can: bcm: defer rx_op deallocation to workqueue to fix thrtimer UAF

[Sasha Levin]

> commit 68973f9db76144825e4f35dfdc80fb8279eb2d57 upstream.
>
> Commit f1b4e32aca08 ("can: bcm: use call_rcu() instead of costly
> synchronize_rcu()") replaced synchronize_rcu() in bcm_delete_rx_op()
> with call_rcu() and introduced the RX_NO_AUTOTIMER flag.

Queued the series for 5.15, thanks.

-- 
Thanks,
Sasha