All of lore.kernel.org
 help / color / mirror / Atom feed
From: Inochi Amaoto <inochiama@gmail.com>
To: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>, Yixun Lan <dlan@kernel.org>,
	Paul Walmsley <pjw@kernel.org>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Alexandre Ghiti <alex@ghiti.fr>
Cc: Inochi Amaoto <inochiama@gmail.com>,
	devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
	spacemit@lists.linux.dev, linux-kernel@vger.kernel.org,
	Yixun Lan <dlan@gentoo.org>, Longbin Li <looong.bin@gmail.com>
Subject: [PATCH 2/2] riscv: dts: spacemit: Make dtschema recognize the etherent PHY correctly on K3 com260 board
Date: Wed, 29 Jul 2026 09:24:17 +0800	[thread overview]
Message-ID: <20260729012418.154652-2-inochiama@gmail.com> (raw)
In-Reply-To: <20260729012418.154652-1-inochiama@gmail.com>

Since the previous commit does not change the phy node name,
the dtschema can not recognize the type of the ethernet phy,
so the following error is produced:

/arch/riscv/boot/dts/spacemit/k3-com260-ifx.dtb: phy@1 (ethernet-phy-id001c.c916): $nodename:0: 'phy@1' does not match '^ethernet-phy(@[a-f0-9]+)?$'
        from schema $id: http://devicetree.org/schemas/net/realtek,rtl82xx.yaml
/arch/riscv/boot/dts/spacemit/k3-com260-ifx.dtb: phy@1 (ethernet-phy-id001c.c916): Unevaluated properties are not allowed ('reg', 'reset-assert-us', '
reset-deassert-us', 'reset-gpios' were unexpected)
        from schema $id: http://devicetree.org/schemas/net/realtek,rtl82xx.yaml

Change the nodename to make the dtschema can recognize the right
PHY type.

Fixes: 9db839d52ccd ("riscv: dts: spacemit: Fix phy id check for the phy on com260 board")
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
---
 arch/riscv/boot/dts/spacemit/k3-com260.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/riscv/boot/dts/spacemit/k3-com260.dtsi b/arch/riscv/boot/dts/spacemit/k3-com260.dtsi
index 2a07cd8f2a56..c7a04a338d08 100644
--- a/arch/riscv/boot/dts/spacemit/k3-com260.dtsi
+++ b/arch/riscv/boot/dts/spacemit/k3-com260.dtsi
@@ -173,7 +173,7 @@ &eth1 {
 	status = "okay";
 
 	mdio {
-		phy1: phy@1 {
+		phy1: ethernet-phy@1 {
 			compatible = "ethernet-phy-id001c.c916";
 			reg = <1>;
 			reset-gpios = <&gpio 1 5 GPIO_ACTIVE_LOW>;
-- 
2.55.0


WARNING: multiple messages have this Message-ID (diff)
From: Inochi Amaoto <inochiama@gmail.com>
To: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>, Yixun Lan <dlan@kernel.org>,
	Paul Walmsley <pjw@kernel.org>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Alexandre Ghiti <alex@ghiti.fr>
Cc: Inochi Amaoto <inochiama@gmail.com>,
	devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
	spacemit@lists.linux.dev, linux-kernel@vger.kernel.org,
	Yixun Lan <dlan@gentoo.org>, Longbin Li <looong.bin@gmail.com>
Subject: [PATCH 2/2] riscv: dts: spacemit: Make dtschema recognize the etherent PHY correctly on K3 com260 board
Date: Wed, 29 Jul 2026 09:24:17 +0800	[thread overview]
Message-ID: <20260729012418.154652-2-inochiama@gmail.com> (raw)
In-Reply-To: <20260729012418.154652-1-inochiama@gmail.com>

Since the previous commit does not change the phy node name,
the dtschema can not recognize the type of the ethernet phy,
so the following error is produced:

/arch/riscv/boot/dts/spacemit/k3-com260-ifx.dtb: phy@1 (ethernet-phy-id001c.c916): $nodename:0: 'phy@1' does not match '^ethernet-phy(@[a-f0-9]+)?$'
        from schema $id: http://devicetree.org/schemas/net/realtek,rtl82xx.yaml
/arch/riscv/boot/dts/spacemit/k3-com260-ifx.dtb: phy@1 (ethernet-phy-id001c.c916): Unevaluated properties are not allowed ('reg', 'reset-assert-us', '
reset-deassert-us', 'reset-gpios' were unexpected)
        from schema $id: http://devicetree.org/schemas/net/realtek,rtl82xx.yaml

Change the nodename to make the dtschema can recognize the right
PHY type.

Fixes: 9db839d52ccd ("riscv: dts: spacemit: Fix phy id check for the phy on com260 board")
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
---
 arch/riscv/boot/dts/spacemit/k3-com260.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/riscv/boot/dts/spacemit/k3-com260.dtsi b/arch/riscv/boot/dts/spacemit/k3-com260.dtsi
index 2a07cd8f2a56..c7a04a338d08 100644
--- a/arch/riscv/boot/dts/spacemit/k3-com260.dtsi
+++ b/arch/riscv/boot/dts/spacemit/k3-com260.dtsi
@@ -173,7 +173,7 @@ &eth1 {
 	status = "okay";
 
 	mdio {
-		phy1: phy@1 {
+		phy1: ethernet-phy@1 {
 			compatible = "ethernet-phy-id001c.c916";
 			reg = <1>;
 			reset-gpios = <&gpio 1 5 GPIO_ACTIVE_LOW>;
-- 
2.55.0


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

  reply	other threads:[~2026-07-29  1:24 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-29  1:24 [PATCH 1/2] riscv: dts: spacemit: Make dtschema recognize the etherent PHY correctly on K3 pico-itx board Inochi Amaoto
2026-07-29  1:24 ` Inochi Amaoto
2026-07-29  1:24 ` Inochi Amaoto [this message]
2026-07-29  1:24   ` [PATCH 2/2] riscv: dts: spacemit: Make dtschema recognize the etherent PHY correctly on K3 com260 board Inochi Amaoto
2026-07-29  1:38   ` Yixun Lan
2026-07-29  1:38     ` Yixun Lan
2026-07-29  1:36 ` [PATCH 1/2] riscv: dts: spacemit: Make dtschema recognize the etherent PHY correctly on K3 pico-itx board Yixun Lan
2026-07-29  1:36   ` Yixun Lan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260729012418.154652-2-inochiama@gmail.com \
    --to=inochiama@gmail.com \
    --cc=alex@ghiti.fr \
    --cc=aou@eecs.berkeley.edu \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dlan@gentoo.org \
    --cc=dlan@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=looong.bin@gmail.com \
    --cc=palmer@dabbelt.com \
    --cc=pjw@kernel.org \
    --cc=robh@kernel.org \
    --cc=spacemit@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.