* FAILED: patch "[PATCH] net: pcs: xpcs: fix SGMII state reading" failed to apply to 6.6-stable tree
@ 2026-07-29 13:53 gregkh
2026-07-29 19:11 ` [PATCH 6.6.y] net: pcs: xpcs: fix SGMII state reading Coia Prant
0 siblings, 1 reply; 2+ messages in thread
From: gregkh @ 2026-07-29 13:53 UTC (permalink / raw)
To: coiaprant, jiawenwu, kuba, maxime.chevallier; +Cc: stable
The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x def9a4745e105145133e442dd8a1c126caf0f553
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026072905-mashed-sedan-7f29@gregkh' --subject-prefix 'PATCH 6.6.y' 'HEAD^..'
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From def9a4745e105145133e442dd8a1c126caf0f553 Mon Sep 17 00:00:00 2001
From: Coia Prant <coiaprant@gmail.com>
Date: Fri, 17 Jul 2026 15:43:25 +0800
Subject: [PATCH] net: pcs: xpcs: fix SGMII state reading
Commit 2a22b7ae2fa3 ("net: pcs: xpcs: adapt Wangxun NICs for SGMII mode")
added a path in xpcs_get_state_c37_sgmii() that reads speed/duplex from
BMCR after AN completes. However, BMCR does not reflect the negotiated
result on the hardware where this has been tested:
- On RK3568 (MAC side SGMII), BMCR returns a fixed hardware reset value
- Wangxun engineer Jiawen Wu confirmed that on their side, "BMCR looks
like it only wants to be return as 0" [0]
The correct information is available in CL37_ANSGM_STS, which contains
the actual link status and negotiated speed/duplex.
This bug was previously masked by phylink core, which overrides the PCS
link state with the PHY state when a PHY is present:
/* If we have a phy, the "up" state is the union of both the
* PHY and the MAC
*/
if (phy)
link_state.link &= pl->phy_state.link;
Thus, when the link is down, the PHY's link_down state is applied on top
of whatever the PCS reports, hiding the broken PCS state reading path.
Modify xpcs_get_state_c37_sgmii() to:
1. Read link state from CL37_ANSGM_STS
2. If link is up, report speed/duplex from CL37_ANSGM_STS
3. Remove the broken BMCR reading path entirely
Also properly set state->an_complete to reflect the AN completion status,
and clear CL37_ANCMPLT_INTR when link is down to avoid stale state.
[0] https://lore.kernel.org/all/000c01dd1593$2ac0b0f0$804212d0$@trustnetic.com/
Fixes: 2a22b7ae2fa3 ("net: pcs: xpcs: adapt Wangxun NICs for SGMII mode")
Cc: stable@vger.kernel.org
Tested-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Coia Prant <coiaprant@gmail.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260717074324.3250043-2-coiaprant@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
diff --git a/drivers/net/pcs/pcs-xpcs.c b/drivers/net/pcs/pcs-xpcs.c
index e69fa2f0a0e8..0337e2bcc012 100644
--- a/drivers/net/pcs/pcs-xpcs.c
+++ b/drivers/net/pcs/pcs-xpcs.c
@@ -1058,6 +1058,7 @@ static int xpcs_get_state_c37_sgmii(struct dw_xpcs *xpcs,
/* Reset link_state */
state->link = false;
+ state->an_complete = false;
state->speed = SPEED_UNKNOWN;
state->duplex = DUPLEX_UNKNOWN;
state->pause = 0;
@@ -1069,6 +1070,8 @@ static int xpcs_get_state_c37_sgmii(struct dw_xpcs *xpcs,
if (ret < 0)
return ret;
+ state->an_complete = ret & DW_VR_MII_AN_STS_C37_ANCMPLT_INTR;
+
if (ret & DW_VR_MII_C37_ANSGM_SP_LNKSTS) {
int speed_value;
@@ -1086,35 +1089,14 @@ static int xpcs_get_state_c37_sgmii(struct dw_xpcs *xpcs,
state->duplex = DUPLEX_FULL;
else
state->duplex = DUPLEX_HALF;
- } else if (ret == DW_VR_MII_AN_STS_C37_ANCMPLT_INTR) {
- int speed, duplex;
- state->link = true;
-
- speed = xpcs_read(xpcs, MDIO_MMD_VEND2, MII_BMCR);
- if (speed < 0)
- return speed;
-
- speed &= BMCR_SPEED100 | BMCR_SPEED1000;
- if (speed == BMCR_SPEED1000)
- state->speed = SPEED_1000;
- else if (speed == BMCR_SPEED100)
- state->speed = SPEED_100;
- else if (speed == 0)
- state->speed = SPEED_10;
-
- duplex = xpcs_read(xpcs, MDIO_MMD_VEND2, MII_ADVERTISE);
- if (duplex < 0)
- return duplex;
-
- if (duplex & ADVERTISE_1000XFULL)
- state->duplex = DUPLEX_FULL;
- else if (duplex & ADVERTISE_1000XHALF)
- state->duplex = DUPLEX_HALF;
-
- xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_INTR_STS, 0);
+ return 0;
}
+ /* Clear AN complete status or interrupt */
+ if (state->an_complete)
+ xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_INTR_STS, 0);
+
return 0;
}
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [PATCH 6.6.y] net: pcs: xpcs: fix SGMII state reading
2026-07-29 13:53 FAILED: patch "[PATCH] net: pcs: xpcs: fix SGMII state reading" failed to apply to 6.6-stable tree gregkh
@ 2026-07-29 19:11 ` Coia Prant
0 siblings, 0 replies; 2+ messages in thread
From: Coia Prant @ 2026-07-29 19:11 UTC (permalink / raw)
To: stable; +Cc: Coia Prant, Jiawen Wu, Maxime Chevallier, Jakub Kicinski
Commit 2a22b7ae2fa3 ("net: pcs: xpcs: adapt Wangxun NICs for SGMII mode")
added a path in xpcs_get_state_c37_sgmii() that reads speed/duplex from
BMCR after AN completes. However, BMCR does not reflect the negotiated
result on the hardware where this has been tested:
- On RK3568 (MAC side SGMII), BMCR returns a fixed hardware reset value
- Wangxun engineer Jiawen Wu confirmed that on their side, "BMCR looks
like it only wants to be return as 0" [0]
The correct information is available in CL37_ANSGM_STS, which contains
the actual link status and negotiated speed/duplex.
This bug was previously masked by phylink core, which overrides the PCS
link state with the PHY state when a PHY is present:
/* If we have a phy, the "up" state is the union of both the
* PHY and the MAC
*/
if (phy)
link_state.link &= pl->phy_state.link;
Thus, when the link is down, the PHY's link_down state is applied on top
of whatever the PCS reports, hiding the broken PCS state reading path.
Modify xpcs_get_state_c37_sgmii() to:
1. Read link state from CL37_ANSGM_STS
2. If link is up, report speed/duplex from CL37_ANSGM_STS
3. Remove the broken BMCR reading path entirely
Also properly set state->an_complete to reflect the AN completion status,
and clear CL37_ANCMPLT_INTR when link is down to avoid stale state.
[0] https://lore.kernel.org/all/000c01dd1593$2ac0b0f0$804212d0$@trustnetic.com/
Fixes: 2a22b7ae2fa3 ("net: pcs: xpcs: adapt Wangxun NICs for SGMII mode")
Cc: stable@vger.kernel.org
Tested-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Coia Prant <coiaprant@gmail.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260717074324.3250043-2-coiaprant@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
(cherry picked from commit def9a4745e105145133e442dd8a1c126caf0f553)
---
drivers/net/pcs/pcs-xpcs.c | 32 +++++++-------------------------
1 file changed, 7 insertions(+), 25 deletions(-)
diff --git a/drivers/net/pcs/pcs-xpcs.c b/drivers/net/pcs/pcs-xpcs.c
index f0f41e86a4fb..680e2b261086 100644
--- a/drivers/net/pcs/pcs-xpcs.c
+++ b/drivers/net/pcs/pcs-xpcs.c
@@ -994,6 +994,7 @@ static int xpcs_get_state_c37_sgmii(struct dw_xpcs *xpcs,
/* Reset link_state */
state->link = false;
+ state->an_complete = false;
state->speed = SPEED_UNKNOWN;
state->duplex = DUPLEX_UNKNOWN;
state->pause = 0;
@@ -1005,6 +1006,8 @@ static int xpcs_get_state_c37_sgmii(struct dw_xpcs *xpcs,
if (ret < 0)
return ret;
+ state->an_complete = ret & DW_VR_MII_AN_STS_C37_ANCMPLT_INTR;
+
if (ret & DW_VR_MII_C37_ANSGM_SP_LNKSTS) {
int speed_value;
@@ -1023,34 +1026,13 @@ static int xpcs_get_state_c37_sgmii(struct dw_xpcs *xpcs,
state->duplex = DUPLEX_FULL;
else
state->duplex = DUPLEX_HALF;
- } else if (ret == DW_VR_MII_AN_STS_C37_ANCMPLT_INTR) {
- int speed, duplex;
-
- state->link = true;
-
- speed = xpcs_read(xpcs, MDIO_MMD_VEND2, MDIO_CTRL1);
- if (speed < 0)
- return speed;
-
- speed &= SGMII_SPEED_SS13 | SGMII_SPEED_SS6;
- if (speed == SGMII_SPEED_SS6)
- state->speed = SPEED_1000;
- else if (speed == SGMII_SPEED_SS13)
- state->speed = SPEED_100;
- else if (speed == 0)
- state->speed = SPEED_10;
-
- duplex = xpcs_read(xpcs, MDIO_MMD_VEND2, MII_ADVERTISE);
- if (duplex < 0)
- return duplex;
- if (duplex & DW_FULL_DUPLEX)
- state->duplex = DUPLEX_FULL;
- else if (duplex & DW_HALF_DUPLEX)
- state->duplex = DUPLEX_HALF;
+ return 0;
+ }
+ /* Clear AN complete status or interrupt */
+ if (state->an_complete)
xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_INTR_STS, 0);
- }
return 0;
}
--
2.47.3
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-07-29 19:11 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-07-29 13:53 FAILED: patch "[PATCH] net: pcs: xpcs: fix SGMII state reading" failed to apply to 6.6-stable tree gregkh
2026-07-29 19:11 ` [PATCH 6.6.y] net: pcs: xpcs: fix SGMII state reading Coia Prant
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.