From: Chenguang Zhao <chenguang.zhao@linux.dev>
To: anthony.l.nguyen@intel.com, przemyslaw.kitszel@intel.com,
andrew+netdev@lunn.ch, davem@davemloft.net, edumazet@google.com,
kuba@kernel.org, pabeni@redhat.com
Cc: intel-wired-lan@lists.osuosl.org, netdev@vger.kernel.org,
chenguang.zhao@linux.dev, kerneljasonxing@gmail.com,
Chenguang Zhao <zhaochenguang@kylinos.cn>
Subject: [Intel-wired-lan] [PATCH net-next v2] i40e: xsk: use xdp_build_skb_from_zc() for XDP_PASS
Date: Wed, 29 Jul 2026 13:49:16 +0800 [thread overview]
Message-ID: <20260729054916.720750-1-chenguang.zhao@linux.dev> (raw)
From: Chenguang Zhao <zhaochenguang@kylinos.cn>
Replace the driver-local i40e_construct_skb_zc() with the common
helper xdp_build_skb_from_zc(). On failure, free the xdp buff in
the caller.
xdp_build_skb_from_zc() already calls skb_record_rx_queue() and
eth_type_trans(), so pull the remaining descriptor field setup into
__i40e_process_skb_fields() and use that on the XDP_PASS path.
Briefly restore the Ethernet header around eth_skb_pad() so padding
sees the full L2 frame length.
Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn>
---
v2:
- Extract descriptor field setup into __i40e_process_skb_fields() and
use it on the XDP_PASS path, so skb_record_rx_queue()/eth_type_trans()
are not repeated after xdp_build_skb_from_zc().
- Keep a brief __skb_push()/__skb_pull() around eth_skb_pad() so padding
still sees the full L2 frame length.
v1:
- https://lore.kernel.org/all/20260724020125.246333-1-chenguang.zhao@linux.dev/
---
drivers/net/ethernet/intel/i40e/i40e_txrx.c | 32 ++++++--
.../ethernet/intel/i40e/i40e_txrx_common.h | 2 +
drivers/net/ethernet/intel/i40e/i40e_xsk.c | 76 +++----------------
3 files changed, 36 insertions(+), 74 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index ef5e657816f0..87553b14d34a 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -1833,17 +1833,17 @@ static inline void i40e_rx_hash(struct i40e_ring *ring,
}
/**
- * i40e_process_skb_fields - Populate skb header fields from Rx descriptor
+ * __i40e_process_skb_fields - Populate skb fields from Rx descriptor
* @rx_ring: rx descriptor ring packet is being transacted on
* @rx_desc: pointer to the EOP Rx descriptor
* @skb: pointer to current skb being populated
*
- * This function checks the ring, descriptor, and packet information in
- * order to populate the hash, checksum, VLAN, protocol, and
- * other fields within the skb.
+ * Populate hash, checksum, PTP timestamp and VLAN from @rx_desc. Does not
+ * call skb_record_rx_queue() or eth_type_trans(); callers that already got
+ * those from xdp_build_skb_from_zc() should use this helper.
**/
-void i40e_process_skb_fields(struct i40e_ring *rx_ring,
- union i40e_rx_desc *rx_desc, struct sk_buff *skb)
+void __i40e_process_skb_fields(struct i40e_ring *rx_ring,
+ union i40e_rx_desc *rx_desc, struct sk_buff *skb)
{
u64 qword = le64_to_cpu(rx_desc->wb.qword1.status_error_len);
u32 rx_status = FIELD_GET(I40E_RXD_QW1_STATUS_MASK, qword);
@@ -1858,14 +1858,30 @@ void i40e_process_skb_fields(struct i40e_ring *rx_ring,
i40e_rx_checksum(rx_ring->vsi, skb, rx_desc);
- skb_record_rx_queue(skb, rx_ring->queue_index);
-
if (qword & BIT(I40E_RX_DESC_STATUS_L2TAG1P_SHIFT)) {
__le16 vlan_tag = rx_desc->wb.qword0.lo_dword.l2tag1;
__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q),
le16_to_cpu(vlan_tag));
}
+}
+
+/**
+ * i40e_process_skb_fields - Populate skb header fields from Rx descriptor
+ * @rx_ring: rx descriptor ring packet is being transacted on
+ * @rx_desc: pointer to the EOP Rx descriptor
+ * @skb: pointer to current skb being populated
+ *
+ * This function checks the ring, descriptor, and packet information in
+ * order to populate the hash, checksum, VLAN, protocol, and
+ * other fields within the skb.
+ **/
+void i40e_process_skb_fields(struct i40e_ring *rx_ring,
+ union i40e_rx_desc *rx_desc, struct sk_buff *skb)
+{
+ __i40e_process_skb_fields(rx_ring, rx_desc, skb);
+
+ skb_record_rx_queue(skb, rx_ring->queue_index);
/* modifies the skb - consumes the enet header */
skb->protocol = eth_type_trans(skb, rx_ring->netdev);
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx_common.h b/drivers/net/ethernet/intel/i40e/i40e_txrx_common.h
index e26807fd2123..3c52e0e60487 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx_common.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx_common.h
@@ -9,6 +9,8 @@
int i40e_xmit_xdp_tx_ring(struct xdp_buff *xdp, struct i40e_ring *xdp_ring);
void i40e_clean_programming_status(struct i40e_ring *rx_ring, u64 qword0_raw,
u64 qword1);
+void __i40e_process_skb_fields(struct i40e_ring *rx_ring,
+ union i40e_rx_desc *rx_desc, struct sk_buff *skb);
void i40e_process_skb_fields(struct i40e_ring *rx_ring,
union i40e_rx_desc *rx_desc, struct sk_buff *skb);
void i40e_xdp_ring_update_tail(struct i40e_ring *xdp_ring);
diff --git a/drivers/net/ethernet/intel/i40e/i40e_xsk.c b/drivers/net/ethernet/intel/i40e/i40e_xsk.c
index 9f47388eaba5..8741dff82bd1 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_xsk.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_xsk.c
@@ -3,6 +3,7 @@
#include <linux/bpf_trace.h>
#include <linux/unroll.h>
+#include <net/xdp.h>
#include <net/xdp_sock_drv.h>
#include "i40e_txrx_common.h"
#include "i40e_xsk.h"
@@ -277,70 +278,6 @@ bool i40e_alloc_rx_buffers_zc(struct i40e_ring *rx_ring, u16 count)
return count == nb_buffs;
}
-/**
- * i40e_construct_skb_zc - Create skbuff from zero-copy Rx buffer
- * @rx_ring: Rx ring
- * @xdp: xdp_buff
- *
- * This functions allocates a new skb from a zero-copy Rx buffer.
- *
- * Returns the skb, or NULL on failure.
- **/
-static struct sk_buff *i40e_construct_skb_zc(struct i40e_ring *rx_ring,
- struct xdp_buff *xdp)
-{
- unsigned int totalsize = xdp->data_end - xdp->data_meta;
- unsigned int metasize = xdp->data - xdp->data_meta;
- struct skb_shared_info *sinfo = NULL;
- struct sk_buff *skb;
- u32 nr_frags = 0;
-
- if (unlikely(xdp_buff_has_frags(xdp))) {
- sinfo = xdp_get_shared_info_from_buff(xdp);
- nr_frags = sinfo->nr_frags;
- }
- net_prefetch(xdp->data_meta);
-
- /* allocate a skb to store the frags */
- skb = napi_alloc_skb(&rx_ring->q_vector->napi, totalsize);
- if (unlikely(!skb))
- goto out;
-
- memcpy(__skb_put(skb, totalsize), xdp->data_meta,
- ALIGN(totalsize, sizeof(long)));
-
- if (metasize) {
- skb_metadata_set(skb, metasize);
- __skb_pull(skb, metasize);
- }
-
- if (likely(!xdp_buff_has_frags(xdp)))
- goto out;
-
- for (int i = 0; i < nr_frags; i++) {
- struct skb_shared_info *skinfo = skb_shinfo(skb);
- skb_frag_t *frag = &sinfo->frags[i];
- struct page *page;
- void *addr;
-
- page = dev_alloc_page();
- if (!page) {
- dev_kfree_skb(skb);
- return NULL;
- }
- addr = page_to_virt(page);
-
- memcpy(addr, skb_frag_page(frag), skb_frag_size(frag));
-
- __skb_fill_page_desc_noacc(skinfo, skinfo->nr_frags++,
- addr, 0, skb_frag_size(frag));
- }
-
-out:
- xsk_buff_free(xdp);
- return skb;
-}
-
static void i40e_handle_xdp_result_zc(struct i40e_ring *rx_ring,
struct xdp_buff *xdp_buff,
union i40e_rx_desc *rx_desc,
@@ -372,21 +309,28 @@ static void i40e_handle_xdp_result_zc(struct i40e_ring *rx_ring,
* BIT(I40E_RXD_QW1_ERROR_SHIFT). This is due to that
* SBP is *not* set in PRT_SBPVSI (default not set).
*/
- skb = i40e_construct_skb_zc(rx_ring, xdp_buff);
+ skb = xdp_build_skb_from_zc(xdp_buff);
if (!skb) {
+ xsk_buff_free(xdp_buff);
rx_ring->rx_stats.alloc_buff_failed++;
*rx_packets = 0;
*rx_bytes = 0;
return;
}
+ /* xdp_build_skb_from_zc() already ran eth_type_trans() and
+ * skb_record_rx_queue(). Restore the Ethernet header only for
+ * eth_skb_pad(), then pull it back.
+ */
+ __skb_push(skb, ETH_HLEN);
if (eth_skb_pad(skb)) {
*rx_packets = 0;
*rx_bytes = 0;
return;
}
+ __skb_pull(skb, ETH_HLEN);
- i40e_process_skb_fields(rx_ring, rx_desc, skb);
+ __i40e_process_skb_fields(rx_ring, rx_desc, skb);
napi_gro_receive(&rx_ring->q_vector->napi, skb);
return;
}
--
2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Chenguang Zhao <chenguang.zhao@linux.dev>
To: anthony.l.nguyen@intel.com, przemyslaw.kitszel@intel.com,
andrew+netdev@lunn.ch, davem@davemloft.net, edumazet@google.com,
kuba@kernel.org, pabeni@redhat.com
Cc: intel-wired-lan@lists.osuosl.org, netdev@vger.kernel.org,
chenguang.zhao@linux.dev, kerneljasonxing@gmail.com,
Chenguang Zhao <zhaochenguang@kylinos.cn>
Subject: [PATCH net-next v2] i40e: xsk: use xdp_build_skb_from_zc() for XDP_PASS
Date: Wed, 29 Jul 2026 13:49:16 +0800 [thread overview]
Message-ID: <20260729054916.720750-1-chenguang.zhao@linux.dev> (raw)
From: Chenguang Zhao <zhaochenguang@kylinos.cn>
Replace the driver-local i40e_construct_skb_zc() with the common
helper xdp_build_skb_from_zc(). On failure, free the xdp buff in
the caller.
xdp_build_skb_from_zc() already calls skb_record_rx_queue() and
eth_type_trans(), so pull the remaining descriptor field setup into
__i40e_process_skb_fields() and use that on the XDP_PASS path.
Briefly restore the Ethernet header around eth_skb_pad() so padding
sees the full L2 frame length.
Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn>
---
v2:
- Extract descriptor field setup into __i40e_process_skb_fields() and
use it on the XDP_PASS path, so skb_record_rx_queue()/eth_type_trans()
are not repeated after xdp_build_skb_from_zc().
- Keep a brief __skb_push()/__skb_pull() around eth_skb_pad() so padding
still sees the full L2 frame length.
v1:
- https://lore.kernel.org/all/20260724020125.246333-1-chenguang.zhao@linux.dev/
---
drivers/net/ethernet/intel/i40e/i40e_txrx.c | 32 ++++++--
.../ethernet/intel/i40e/i40e_txrx_common.h | 2 +
drivers/net/ethernet/intel/i40e/i40e_xsk.c | 76 +++----------------
3 files changed, 36 insertions(+), 74 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index ef5e657816f0..87553b14d34a 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -1833,17 +1833,17 @@ static inline void i40e_rx_hash(struct i40e_ring *ring,
}
/**
- * i40e_process_skb_fields - Populate skb header fields from Rx descriptor
+ * __i40e_process_skb_fields - Populate skb fields from Rx descriptor
* @rx_ring: rx descriptor ring packet is being transacted on
* @rx_desc: pointer to the EOP Rx descriptor
* @skb: pointer to current skb being populated
*
- * This function checks the ring, descriptor, and packet information in
- * order to populate the hash, checksum, VLAN, protocol, and
- * other fields within the skb.
+ * Populate hash, checksum, PTP timestamp and VLAN from @rx_desc. Does not
+ * call skb_record_rx_queue() or eth_type_trans(); callers that already got
+ * those from xdp_build_skb_from_zc() should use this helper.
**/
-void i40e_process_skb_fields(struct i40e_ring *rx_ring,
- union i40e_rx_desc *rx_desc, struct sk_buff *skb)
+void __i40e_process_skb_fields(struct i40e_ring *rx_ring,
+ union i40e_rx_desc *rx_desc, struct sk_buff *skb)
{
u64 qword = le64_to_cpu(rx_desc->wb.qword1.status_error_len);
u32 rx_status = FIELD_GET(I40E_RXD_QW1_STATUS_MASK, qword);
@@ -1858,14 +1858,30 @@ void i40e_process_skb_fields(struct i40e_ring *rx_ring,
i40e_rx_checksum(rx_ring->vsi, skb, rx_desc);
- skb_record_rx_queue(skb, rx_ring->queue_index);
-
if (qword & BIT(I40E_RX_DESC_STATUS_L2TAG1P_SHIFT)) {
__le16 vlan_tag = rx_desc->wb.qword0.lo_dword.l2tag1;
__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q),
le16_to_cpu(vlan_tag));
}
+}
+
+/**
+ * i40e_process_skb_fields - Populate skb header fields from Rx descriptor
+ * @rx_ring: rx descriptor ring packet is being transacted on
+ * @rx_desc: pointer to the EOP Rx descriptor
+ * @skb: pointer to current skb being populated
+ *
+ * This function checks the ring, descriptor, and packet information in
+ * order to populate the hash, checksum, VLAN, protocol, and
+ * other fields within the skb.
+ **/
+void i40e_process_skb_fields(struct i40e_ring *rx_ring,
+ union i40e_rx_desc *rx_desc, struct sk_buff *skb)
+{
+ __i40e_process_skb_fields(rx_ring, rx_desc, skb);
+
+ skb_record_rx_queue(skb, rx_ring->queue_index);
/* modifies the skb - consumes the enet header */
skb->protocol = eth_type_trans(skb, rx_ring->netdev);
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx_common.h b/drivers/net/ethernet/intel/i40e/i40e_txrx_common.h
index e26807fd2123..3c52e0e60487 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx_common.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx_common.h
@@ -9,6 +9,8 @@
int i40e_xmit_xdp_tx_ring(struct xdp_buff *xdp, struct i40e_ring *xdp_ring);
void i40e_clean_programming_status(struct i40e_ring *rx_ring, u64 qword0_raw,
u64 qword1);
+void __i40e_process_skb_fields(struct i40e_ring *rx_ring,
+ union i40e_rx_desc *rx_desc, struct sk_buff *skb);
void i40e_process_skb_fields(struct i40e_ring *rx_ring,
union i40e_rx_desc *rx_desc, struct sk_buff *skb);
void i40e_xdp_ring_update_tail(struct i40e_ring *xdp_ring);
diff --git a/drivers/net/ethernet/intel/i40e/i40e_xsk.c b/drivers/net/ethernet/intel/i40e/i40e_xsk.c
index 9f47388eaba5..8741dff82bd1 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_xsk.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_xsk.c
@@ -3,6 +3,7 @@
#include <linux/bpf_trace.h>
#include <linux/unroll.h>
+#include <net/xdp.h>
#include <net/xdp_sock_drv.h>
#include "i40e_txrx_common.h"
#include "i40e_xsk.h"
@@ -277,70 +278,6 @@ bool i40e_alloc_rx_buffers_zc(struct i40e_ring *rx_ring, u16 count)
return count == nb_buffs;
}
-/**
- * i40e_construct_skb_zc - Create skbuff from zero-copy Rx buffer
- * @rx_ring: Rx ring
- * @xdp: xdp_buff
- *
- * This functions allocates a new skb from a zero-copy Rx buffer.
- *
- * Returns the skb, or NULL on failure.
- **/
-static struct sk_buff *i40e_construct_skb_zc(struct i40e_ring *rx_ring,
- struct xdp_buff *xdp)
-{
- unsigned int totalsize = xdp->data_end - xdp->data_meta;
- unsigned int metasize = xdp->data - xdp->data_meta;
- struct skb_shared_info *sinfo = NULL;
- struct sk_buff *skb;
- u32 nr_frags = 0;
-
- if (unlikely(xdp_buff_has_frags(xdp))) {
- sinfo = xdp_get_shared_info_from_buff(xdp);
- nr_frags = sinfo->nr_frags;
- }
- net_prefetch(xdp->data_meta);
-
- /* allocate a skb to store the frags */
- skb = napi_alloc_skb(&rx_ring->q_vector->napi, totalsize);
- if (unlikely(!skb))
- goto out;
-
- memcpy(__skb_put(skb, totalsize), xdp->data_meta,
- ALIGN(totalsize, sizeof(long)));
-
- if (metasize) {
- skb_metadata_set(skb, metasize);
- __skb_pull(skb, metasize);
- }
-
- if (likely(!xdp_buff_has_frags(xdp)))
- goto out;
-
- for (int i = 0; i < nr_frags; i++) {
- struct skb_shared_info *skinfo = skb_shinfo(skb);
- skb_frag_t *frag = &sinfo->frags[i];
- struct page *page;
- void *addr;
-
- page = dev_alloc_page();
- if (!page) {
- dev_kfree_skb(skb);
- return NULL;
- }
- addr = page_to_virt(page);
-
- memcpy(addr, skb_frag_page(frag), skb_frag_size(frag));
-
- __skb_fill_page_desc_noacc(skinfo, skinfo->nr_frags++,
- addr, 0, skb_frag_size(frag));
- }
-
-out:
- xsk_buff_free(xdp);
- return skb;
-}
-
static void i40e_handle_xdp_result_zc(struct i40e_ring *rx_ring,
struct xdp_buff *xdp_buff,
union i40e_rx_desc *rx_desc,
@@ -372,21 +309,28 @@ static void i40e_handle_xdp_result_zc(struct i40e_ring *rx_ring,
* BIT(I40E_RXD_QW1_ERROR_SHIFT). This is due to that
* SBP is *not* set in PRT_SBPVSI (default not set).
*/
- skb = i40e_construct_skb_zc(rx_ring, xdp_buff);
+ skb = xdp_build_skb_from_zc(xdp_buff);
if (!skb) {
+ xsk_buff_free(xdp_buff);
rx_ring->rx_stats.alloc_buff_failed++;
*rx_packets = 0;
*rx_bytes = 0;
return;
}
+ /* xdp_build_skb_from_zc() already ran eth_type_trans() and
+ * skb_record_rx_queue(). Restore the Ethernet header only for
+ * eth_skb_pad(), then pull it back.
+ */
+ __skb_push(skb, ETH_HLEN);
if (eth_skb_pad(skb)) {
*rx_packets = 0;
*rx_bytes = 0;
return;
}
+ __skb_pull(skb, ETH_HLEN);
- i40e_process_skb_fields(rx_ring, rx_desc, skb);
+ __i40e_process_skb_fields(rx_ring, rx_desc, skb);
napi_gro_receive(&rx_ring->q_vector->napi, skb);
return;
}
--
2.25.1
next reply other threads:[~2026-07-29 5:50 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-29 5:49 Chenguang Zhao [this message]
2026-07-29 5:49 ` [PATCH net-next v2] i40e: xsk: use xdp_build_skb_from_zc() for XDP_PASS Chenguang Zhao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260729054916.720750-1-chenguang.zhao@linux.dev \
--to=chenguang.zhao@linux.dev \
--cc=andrew+netdev@lunn.ch \
--cc=anthony.l.nguyen@intel.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=intel-wired-lan@lists.osuosl.org \
--cc=kerneljasonxing@gmail.com \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=przemyslaw.kitszel@intel.com \
--cc=zhaochenguang@kylinos.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.