[PATCH v2 0/4] Enable Bluetooth and WiFi rfkill on K3 Pico ITX

From: Aurelien Jarno <aurelien@aurel32.net>
To: linux-kernel@vger.kernel.org, Paul Walmsley <pjw@kernel.org>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Alexandre Ghiti <alex@ghiti.fr>, Yixun Lan <dlan@kernel.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>,
	linux-riscv@lists.infradead.org (open list:RISC-V
	ARCHITECTURE:Keyword:riscv),
	spacemit@lists.linux.dev (open list:RISC-V SPACEMIT SoC
	Support:Keyword:spacemit)
Subject: [PATCH v2 0/4] Enable Bluetooth and WiFi rfkill on K3 Pico ITX
Date: Wed, 29 Jul 2026 19:20:22 +0200	[thread overview]
Message-ID: <20260729172450.1660418-1-aurelien@aurel32.net> (raw)

This patchset enables Bluetooth through USB on the K3 Pico ITX board and adds the
rfkill nodes for Bluetooth and WiFi so that the devices can be activated.

Note that the patch 4 is only useful with the following patch series
(but it doesn't hurt appying it before):
- https://lore.kernel.org/spacemit/20260709040027.958400-1-inochiama@gmail.com/

Changes v1 -> v2:
 - Rebase on current spacemit/dt-for-next branch
 - Collect Tested-by tag
 - Add link to USB3 PHYs in DT now that K3 PHY support is merged

Aurelien Jarno (4):
  riscv: defconfig: enable RFKILL and RFKILL_GPIO
  riscv: dts: spacemit: k3: add rfkill node for Bluetooth on Pico-ITX
    board
  riscv: dts: spacemit: k3: add USB3 B and C controllers for Pico-ITX
    board
  riscv: dts: spacemit: k3: add rfkill node for WLAN

 arch/riscv/boot/dts/spacemit/k3-pico-itx.dts | 32 ++++++++++
 arch/riscv/boot/dts/spacemit/k3.dtsi         | 66 ++++++++++++++++++++
 arch/riscv/configs/defconfig                 |  2 +
 3 files changed, 100 insertions(+)

-- 
2.53.0