From: Alexander Shiyan <eagle.alexander923@gmail.com>
To: linux-media@vger.kernel.org
Cc: devicetree@vger.kernel.org,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
Dave Stevenson <dave.stevenson@raspberrypi.com>,
Alexander Shiyan <eagle.alexander923@gmail.com>
Subject: [PATCH 0/2] media: i2c: Add onsemi AR0234 camera sensor driver
Date: Fri, 31 Jul 2026 10:35:03 +0300 [thread overview]
Message-ID: <20260731073505.2278769-1-eagle.alexander923@gmail.com> (raw)
This series adds a driver for the onsemi AR0234 CMOS image sensor.
The AR0234 is a 1/2.6-inch global-shutter sensor with a 1940x1220
pixel array, capable of 1920x1200 resolution at up to 120 fps.
It supports MIPI CSI-2 output with 1 to 4 data lanes, raw Bayer
(8/10-bit) and monochrome formats, as well as DPCM 10->8 compression.
The driver has been tested with 2 and 4 lanes on an ARM64 Rockchip
RK3568 platform with a 27 MHz external clock. Both 8-bit and 10-bit
raw Bayer modes are functional.
Notes:
- 1-lane mode is currently disabled; attempts to use it produced no
valid image.
[root@diasom-evb ~]# v4l2-compliance -u 2
v4l2-compliance 1.28.1, 64 bits, 64-bit time_t
Compliance test for device /dev/v4l-subdev2:
Driver Info:
ar0234 9-0018: ================= START STATUS =================
ar0234 9-0018: ================== END STATUS ==================
Driver version : 7.1.0
Capabilities : 0x00000000
Client Capabilities: 0x0000000000000002
interval-uses-which
Required ioctls:
test VIDIOC_SUDBEV_QUERYCAP: OK
test invalid ioctls: OK
Allow for multiple opens:
test second /dev/v4l-subdev2 open: OK
test VIDIOC_SUBDEV_QUERYCAP: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 20 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK (Not Supported)
test VIDIOC_TRY_FMT: OK (Not Supported)
test VIDIOC_S_FMT: OK (Not Supported)
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
test CREATE_BUFS maximum buffers: OK
test VIDIOC_REMOVE_BUFS: OK
test VIDIOC_EXPBUF: OK (Not Supported)
test Requests: OK (Not Supported)
Total for device /dev/v4l-subdev2: 45, Succeeded: 45, Failed: 0, Warnings: 0
Alexander Shiyan (2):
dt-bindings: media: i2c: Add onsemi AR0234 image sensor binding
media: i2c: Add onsemi AR0234 image sensor driver
.../bindings/media/i2c/onnn,ar0234.yaml | 123 ++
drivers/media/i2c/Kconfig | 12 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/ar0234.c | 1265 +++++++++++++++++
4 files changed, 1401 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/onnn,ar0234.yaml
create mode 100644 drivers/media/i2c/ar0234.c
--
2.52.0
next reply other threads:[~2026-07-31 7:35 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-31 7:35 Alexander Shiyan [this message]
2026-07-31 7:35 ` [PATCH 1/2] dt-bindings: media: i2c: Add onsemi AR0234 image sensor binding Alexander Shiyan
2026-07-31 7:39 ` sashiko-bot
2026-07-31 10:18 ` Rob Herring (Arm)
2026-07-31 7:35 ` [PATCH 2/2] media: i2c: Add onsemi AR0234 image sensor driver Alexander Shiyan
2026-07-31 7:49 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260731073505.2278769-1-eagle.alexander923@gmail.com \
--to=eagle.alexander923@gmail.com \
--cc=conor+dt@kernel.org \
--cc=dave.stevenson@raspberrypi.com \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=robh@kernel.org \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.