All of lore.kernel.org
 help / color / mirror / Atom feed
From: Daeho Jeong <daeho43@gmail.com>
To: linux-kernel@vger.kernel.org,
	linux-f2fs-devel@lists.sourceforge.net, kernel-team@android.com
Cc: Daeho Jeong <daehojeong@google.com>
Subject: [PATCH v2] fsck.f2fs: sanitize invalid segment type during block update
Date: Mon,  3 Aug 2026 11:21:20 -0700	[thread overview]
Message-ID: <20260803182120.2291138-1-daeho43@gmail.com> (raw)

From: Daeho Jeong <daehojeong@google.com>

If an invalid segment type (type < 0 || type >= NO_CHECK_TYPE) is read
from SIT during block update, update_block() now validates the type,
reports corruption via ASSERT_MSG(), fixes se->type directly, and falls
back to a valid active curseg type based on its SSA summary block type
when fix_on is enabled. find_next_free_block() also validates want_type to
prevent out-of-bounds accesses.

Signed-off-by: Daeho Jeong <daehojeong@google.com>
---
v2: used ASSERT_MSG() instead of ERR_MSG().
    used the correct type info for fixed_type.
    fixed se->type on top of fixing the local type only.
---
 fsck/mount.c   |  5 +++++
 fsck/segment.c | 20 ++++++++++++++++++--
 2 files changed, 23 insertions(+), 2 deletions(-)

diff --git a/fsck/mount.c b/fsck/mount.c
index 85ed404..916dfbf 100644
--- a/fsck/mount.c
+++ b/fsck/mount.c
@@ -3059,6 +3059,11 @@ int find_next_free_block(struct f2fs_sb_info *sbi, u64 *to, int left,
 	u64 end_blkaddr = (get_sb(segment_count_main) <<
 			get_sb(log_blocks_per_seg)) + get_sb(main_blkaddr);
 
+	if (want_type < 0 || want_type >= NO_CHECK_TYPE) {
+		ASSERT_MSG("Invalid segment type %d for block allocation", want_type);
+		return -EINVAL;
+	}
+
 	if (c.zoned_model == F2FS_ZONED_HM && !new_sec) {
 		struct curseg_info *curseg = CURSEG_I(sbi, want_type);
 		unsigned int segs_per_zone = sbi->segs_per_sec * sbi->secs_per_zone;
diff --git a/fsck/segment.c b/fsck/segment.c
index 46dc747..43f85ec 100644
--- a/fsck/segment.c
+++ b/fsck/segment.c
@@ -770,15 +770,32 @@ int update_block(struct f2fs_sb_info *sbi, void *buf, u32 *blkaddr,
 	struct seg_entry *se;
 	struct f2fs_summary sum;
 	u64 new_blkaddr, old_blkaddr = *blkaddr, offset;
-	int ret, type;
+	int ret, type, sum_type;
 
 	if (c.zoned_model != F2FS_ZONED_HM)
 		return dev_write_block(buf, old_blkaddr, WRITE_LIFE_NONE);
 
+	sum_type = get_sum_entry(sbi, old_blkaddr, &sum);
+
 	/* update sit bitmap & valid_blocks && se->type for old block*/
 	se = get_seg_entry(sbi, GET_SEGNO(sbi, old_blkaddr));
 	offset = OFFSET_IN_SEG(sbi, old_blkaddr);
 	type = se->type;
+	if (type < 0 || type >= NO_CHECK_TYPE) {
+		int fixed_type = (sum_type == SEG_TYPE_NODE ||
+				sum_type == SEG_TYPE_CUR_NODE) ?
+				CURSEG_HOT_NODE : CURSEG_HOT_DATA;
+
+		ASSERT_MSG("Invalid SIT segment type %d at blkaddr 0x%"PRIx64,
+				type, old_blkaddr);
+
+		if (!c.fix_on)
+			return -EINVAL;
+
+		FIX_MSG("Correct invalid segment type %d -> %d for blkaddr 0x%"PRIx64"\n",
+				type, fixed_type, old_blkaddr);
+		se->type = se->orig_type = type = fixed_type;
+	}
 	se->valid_blocks--;
 	f2fs_clear_bit(offset, (char *)se->cur_valid_map);
 	if (need_fsync_data_record(sbi))
@@ -811,7 +828,6 @@ int update_block(struct f2fs_sb_info *sbi, void *buf, u32 *blkaddr,
 	f2fs_set_sit_bitmap(sbi, new_blkaddr);
 
 	/* update SSA */
-	get_sum_entry(sbi, old_blkaddr, &sum);
 	update_sum_entry(sbi, new_blkaddr, &sum);
 
 	if (IS_DATASEG(type)) {
-- 
2.55.0.571.g244d577d93-goog


WARNING: multiple messages have this Message-ID (diff)
From: Daeho Jeong <daeho43@gmail.com>
To: linux-kernel@vger.kernel.org,
	linux-f2fs-devel@lists.sourceforge.net, kernel-team@android.com
Cc: Daeho Jeong <daehojeong@google.com>
Subject: [f2fs-dev] [PATCH v2] fsck.f2fs: sanitize invalid segment type during block update
Date: Mon,  3 Aug 2026 11:21:20 -0700	[thread overview]
Message-ID: <20260803182120.2291138-1-daeho43@gmail.com> (raw)

From: Daeho Jeong <daehojeong@google.com>

If an invalid segment type (type < 0 || type >= NO_CHECK_TYPE) is read
from SIT during block update, update_block() now validates the type,
reports corruption via ASSERT_MSG(), fixes se->type directly, and falls
back to a valid active curseg type based on its SSA summary block type
when fix_on is enabled. find_next_free_block() also validates want_type to
prevent out-of-bounds accesses.

Signed-off-by: Daeho Jeong <daehojeong@google.com>
---
v2: used ASSERT_MSG() instead of ERR_MSG().
    used the correct type info for fixed_type.
    fixed se->type on top of fixing the local type only.
---
 fsck/mount.c   |  5 +++++
 fsck/segment.c | 20 ++++++++++++++++++--
 2 files changed, 23 insertions(+), 2 deletions(-)

diff --git a/fsck/mount.c b/fsck/mount.c
index 85ed404..916dfbf 100644
--- a/fsck/mount.c
+++ b/fsck/mount.c
@@ -3059,6 +3059,11 @@ int find_next_free_block(struct f2fs_sb_info *sbi, u64 *to, int left,
 	u64 end_blkaddr = (get_sb(segment_count_main) <<
 			get_sb(log_blocks_per_seg)) + get_sb(main_blkaddr);
 
+	if (want_type < 0 || want_type >= NO_CHECK_TYPE) {
+		ASSERT_MSG("Invalid segment type %d for block allocation", want_type);
+		return -EINVAL;
+	}
+
 	if (c.zoned_model == F2FS_ZONED_HM && !new_sec) {
 		struct curseg_info *curseg = CURSEG_I(sbi, want_type);
 		unsigned int segs_per_zone = sbi->segs_per_sec * sbi->secs_per_zone;
diff --git a/fsck/segment.c b/fsck/segment.c
index 46dc747..43f85ec 100644
--- a/fsck/segment.c
+++ b/fsck/segment.c
@@ -770,15 +770,32 @@ int update_block(struct f2fs_sb_info *sbi, void *buf, u32 *blkaddr,
 	struct seg_entry *se;
 	struct f2fs_summary sum;
 	u64 new_blkaddr, old_blkaddr = *blkaddr, offset;
-	int ret, type;
+	int ret, type, sum_type;
 
 	if (c.zoned_model != F2FS_ZONED_HM)
 		return dev_write_block(buf, old_blkaddr, WRITE_LIFE_NONE);
 
+	sum_type = get_sum_entry(sbi, old_blkaddr, &sum);
+
 	/* update sit bitmap & valid_blocks && se->type for old block*/
 	se = get_seg_entry(sbi, GET_SEGNO(sbi, old_blkaddr));
 	offset = OFFSET_IN_SEG(sbi, old_blkaddr);
 	type = se->type;
+	if (type < 0 || type >= NO_CHECK_TYPE) {
+		int fixed_type = (sum_type == SEG_TYPE_NODE ||
+				sum_type == SEG_TYPE_CUR_NODE) ?
+				CURSEG_HOT_NODE : CURSEG_HOT_DATA;
+
+		ASSERT_MSG("Invalid SIT segment type %d at blkaddr 0x%"PRIx64,
+				type, old_blkaddr);
+
+		if (!c.fix_on)
+			return -EINVAL;
+
+		FIX_MSG("Correct invalid segment type %d -> %d for blkaddr 0x%"PRIx64"\n",
+				type, fixed_type, old_blkaddr);
+		se->type = se->orig_type = type = fixed_type;
+	}
 	se->valid_blocks--;
 	f2fs_clear_bit(offset, (char *)se->cur_valid_map);
 	if (need_fsync_data_record(sbi))
@@ -811,7 +828,6 @@ int update_block(struct f2fs_sb_info *sbi, void *buf, u32 *blkaddr,
 	f2fs_set_sit_bitmap(sbi, new_blkaddr);
 
 	/* update SSA */
-	get_sum_entry(sbi, old_blkaddr, &sum);
 	update_sum_entry(sbi, new_blkaddr, &sum);
 
 	if (IS_DATASEG(type)) {
-- 
2.55.0.571.g244d577d93-goog



_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel

             reply	other threads:[~2026-08-03 18:21 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-03 18:21 Daeho Jeong [this message]
2026-08-03 18:21 ` [f2fs-dev] [PATCH v2] fsck.f2fs: sanitize invalid segment type during block update Daeho Jeong
2026-08-04  1:07 ` Chao Yu
2026-08-04  1:07   ` Chao Yu via Linux-f2fs-devel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260803182120.2291138-1-daeho43@gmail.com \
    --to=daeho43@gmail.com \
    --cc=daehojeong@google.com \
    --cc=kernel-team@android.com \
    --cc=linux-f2fs-devel@lists.sourceforge.net \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.