From: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
To: Mark Brown <broonie@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
David Rhodes <david.rhodes@cirrus.com>,
Richard Fitzgerald <rf@opensource.cirrus.com>
Cc: Charles Keepax <ckeepax@opensource.cirrus.com>,
Vlad Karpovich <vkarpovi@opensource.cirrus.com>,
Paul Handrigan <Paul.Handrigan@cirrus.com>,
patches@opensource.cirrus.com, linux-sound@vger.kernel.org,
stable@vger.kernel.org
Subject: [PATCH 2/3] ASoC: cs35l45: sort the register default table
Date: Wed, 5 Aug 2026 11:24:12 +0300 [thread overview]
Message-ID: <20260805082413.26174-3-peter.ujfalusi@linux.intel.com> (raw)
In-Reply-To: <20260805082413.26174-1-peter.ujfalusi@linux.intel.com>
reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch(). See commit
fd80df352ba1 ("regcache: Add support for sorting defaults arrays").
cs35l45_defaults[] lists the DSP1_RX*_RATE and DSP1_TX*_RATE registers
(0x02b80080 - 0x02b802b8) in the middle of the table, ahead of entries with
much lower addresses, so the binary search does not find 36 of its 73
entries. regcache_reg_needs_sync() then cannot compare those against their
default and reports that a sync is needed, so they are written to the
device on every regcache_sync() even when they were never touched.
Sort the table by register address.
Fixes: 74b14e2850a3 ("ASoC: cs35l45: DSP Support")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
---
sound/soc/codecs/cs35l45-tables.c | 32 +++++++++++++++----------------
1 file changed, 16 insertions(+), 16 deletions(-)
diff --git a/sound/soc/codecs/cs35l45-tables.c b/sound/soc/codecs/cs35l45-tables.c
index d2ecc7b3f619..764dbaa35042 100644
--- a/sound/soc/codecs/cs35l45-tables.c
+++ b/sound/soc/codecs/cs35l45-tables.c
@@ -66,22 +66,6 @@ static const struct reg_default cs35l45_defaults[] = {
{ CS35L45_ASPTX3_INPUT, 0x00000020 },
{ CS35L45_ASPTX4_INPUT, 0x00000028 },
{ CS35L45_ASPTX5_INPUT, 0x00000048 },
- { CS35L45_DSP1_RX1_RATE, 0x00000001 },
- { CS35L45_DSP1_RX2_RATE, 0x00000001 },
- { CS35L45_DSP1_RX3_RATE, 0x00000001 },
- { CS35L45_DSP1_RX4_RATE, 0x00000001 },
- { CS35L45_DSP1_RX5_RATE, 0x00000001 },
- { CS35L45_DSP1_RX6_RATE, 0x00000001 },
- { CS35L45_DSP1_RX7_RATE, 0x00000001 },
- { CS35L45_DSP1_RX8_RATE, 0x00000001 },
- { CS35L45_DSP1_TX1_RATE, 0x00000001 },
- { CS35L45_DSP1_TX2_RATE, 0x00000001 },
- { CS35L45_DSP1_TX3_RATE, 0x00000001 },
- { CS35L45_DSP1_TX4_RATE, 0x00000001 },
- { CS35L45_DSP1_TX5_RATE, 0x00000001 },
- { CS35L45_DSP1_TX6_RATE, 0x00000001 },
- { CS35L45_DSP1_TX7_RATE, 0x00000001 },
- { CS35L45_DSP1_TX8_RATE, 0x00000001 },
{ CS35L45_DSP1RX1_INPUT, 0x00000008 },
{ CS35L45_DSP1RX2_INPUT, 0x00000009 },
{ CS35L45_DSP1RX3_INPUT, 0x00000018 },
@@ -114,6 +98,22 @@ static const struct reg_default cs35l45_defaults[] = {
{ CS35L45_GPIO1_CTRL1, 0x81000001 },
{ CS35L45_GPIO2_CTRL1, 0x81000001 },
{ CS35L45_GPIO3_CTRL1, 0x81000001 },
+ { CS35L45_DSP1_RX1_RATE, 0x00000001 },
+ { CS35L45_DSP1_RX2_RATE, 0x00000001 },
+ { CS35L45_DSP1_RX3_RATE, 0x00000001 },
+ { CS35L45_DSP1_RX4_RATE, 0x00000001 },
+ { CS35L45_DSP1_RX5_RATE, 0x00000001 },
+ { CS35L45_DSP1_RX6_RATE, 0x00000001 },
+ { CS35L45_DSP1_RX7_RATE, 0x00000001 },
+ { CS35L45_DSP1_RX8_RATE, 0x00000001 },
+ { CS35L45_DSP1_TX1_RATE, 0x00000001 },
+ { CS35L45_DSP1_TX2_RATE, 0x00000001 },
+ { CS35L45_DSP1_TX3_RATE, 0x00000001 },
+ { CS35L45_DSP1_TX4_RATE, 0x00000001 },
+ { CS35L45_DSP1_TX5_RATE, 0x00000001 },
+ { CS35L45_DSP1_TX6_RATE, 0x00000001 },
+ { CS35L45_DSP1_TX7_RATE, 0x00000001 },
+ { CS35L45_DSP1_TX8_RATE, 0x00000001 },
};
static bool cs35l45_readable_reg(struct device *dev, unsigned int reg)
--
2.55.0
next prev parent reply other threads:[~2026-08-05 8:23 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-05 8:24 [PATCH 0/3] ASoC: cs35l41/cs35l45/cs4265: sort the reg_defaults tables Peter Ujfalusi
2026-08-05 8:24 ` [PATCH 1/3] ASoC: cs35l41: sort the register default table Peter Ujfalusi
2026-08-05 9:58 ` Richard Fitzgerald
2026-08-05 8:24 ` Peter Ujfalusi [this message]
2026-08-05 11:35 ` [PATCH 2/3] ASoC: cs35l45: " Richard Fitzgerald
2026-08-05 8:24 ` [PATCH 3/3] ASoC: cs4265: " Peter Ujfalusi
2026-08-05 11:31 ` Richard Fitzgerald
2026-08-05 8:40 ` [PATCH 0/3] ASoC: cs35l41/cs35l45/cs4265: sort the reg_defaults tables Pierre-Louis Bossart
2026-08-05 8:52 ` Péter Ujfalusi
2026-08-05 8:59 ` Pierre-Louis Bossart
2026-08-05 9:00 ` Richard Fitzgerald
2026-08-05 9:10 ` Péter Ujfalusi
2026-08-05 9:25 ` Charles Keepax
2026-08-05 9:38 ` Richard Fitzgerald
2026-08-05 9:52 ` Charles Keepax
2026-08-05 9:52 ` Péter Ujfalusi
2026-08-05 9:56 ` Richard Fitzgerald
2026-08-05 9:59 ` Péter Ujfalusi
2026-08-05 10:10 ` Charles Keepax
2026-08-05 10:17 ` Péter Ujfalusi
2026-08-05 10:36 ` Richard Fitzgerald
2026-08-05 11:25 ` Péter Ujfalusi
2026-08-05 11:31 ` Charles Keepax
2026-08-05 11:38 ` Richard Fitzgerald
2026-08-05 11:38 ` Péter Ujfalusi
2026-08-05 9:25 ` Péter Ujfalusi
2026-08-05 10:38 ` Mark Brown
2026-08-05 8:59 ` Charles Keepax
2026-08-05 12:37 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260805082413.26174-3-peter.ujfalusi@linux.intel.com \
--to=peter.ujfalusi@linux.intel.com \
--cc=Paul.Handrigan@cirrus.com \
--cc=broonie@kernel.org \
--cc=ckeepax@opensource.cirrus.com \
--cc=david.rhodes@cirrus.com \
--cc=lgirdwood@gmail.com \
--cc=linux-sound@vger.kernel.org \
--cc=patches@opensource.cirrus.com \
--cc=rf@opensource.cirrus.com \
--cc=stable@vger.kernel.org \
--cc=vkarpovi@opensource.cirrus.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.