[PATCH v3 1/4] arm64: dts: ti: k3-am62a: Fix MMC0_CLK register address

[Judith Mendez <jm@ti.com>]

MMC0_CLKLB and MMC0_CLK have incorrectly swapped register addresses
as per datasheet [0]. Set the correct MMC0_CLK address and drop the
unneeded MMC0_CLKLB pin configuration.

[0] https://www.ti.com/lit/gpn/am62a7 Rev. E: Table 5-1. Pin Attributes

Fixes: e041ec6e86e7 ("arm64: dts: ti: k3-am62a7-sk: Enable eMMC support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Moteen Shah <m-shah@ti.com>
---
Changes since v2:
- Add Moteen's review tag
---
 arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index d3b3675e7a8fc..b04636cab71c7 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -328,8 +328,7 @@ AM62AX_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */
 	main_mmc0_pins_default: main-mmc0-default-pins {
 		pinctrl-single,pins = <
 			AM62AX_IOPAD(0x220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */
-			AM62AX_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLKLB */
-			AM62AX_IOPAD(0x21c, PIN_INPUT, 0) /* (AB1) MMC0_CLK */
+			AM62AX_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */
 			AM62AX_IOPAD(0x214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */
 			AM62AX_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AA1) MMC0_DAT1 */
 			AM62AX_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (AA3) MMC0_DAT2 */
-- 
2.54.0