* [PATCH 0/3] init/Kconfig: generalize config COMMAND_LINE_SIZE
@ 2026-08-06 6:05 Wilson Felipe Pereira
2026-08-06 6:05 ` [PATCH 1/3] init/Kconfig: generalize config COMMAND_LINE_SIZE to all architectures Wilson Felipe Pereira
2026-08-06 6:05 ` Wilson Felipe Pereira
0 siblings, 2 replies; 7+ messages in thread
From: Wilson Felipe Pereira @ 2026-08-06 6:05 UTC (permalink / raw)
To: Arnd Bergmann, Andrew Morton
Cc: Yosry Ahmed, Wilson Felipe Pereira, Paul Walmsley, Palmer Dabbelt,
Albert Ou, Alexandre Ghiti, linux-riscv
This patch series promotes COMMAND_LINE_SIZE from arch/s390/Kconfig to
init/Kconfig to be generally available to other architectures.
In some use cases, such as netboot kernels, rootfs configurations, larger
initramfs setups, require larger sizes. While for embedded workloads, it
can be reduced to save memory.
Since COMMAND_LINE_SIZE can be larger, it also makes sense to allow
INIT_ENV_ARG_LIMIT to be configured.
Wilson Felipe Pereira (3):
init/Kconfig: generalize config COMMAND_LINE_SIZE to all architectures
arch: use CONFIG_COMMAND_LINE_SIZE across all architectures
init/Kconfig: make config INIT_ENV_ARG_LIMIT user-configurable
arch/alpha/include/uapi/asm/setup.h | 4 ++++
arch/arc/include/asm/setup.h | 2 +-
arch/arm/include/uapi/asm/setup.h | 6 +++++-
arch/arm64/include/uapi/asm/setup.h | 4 ++++
arch/loongarch/include/uapi/asm/setup.h | 4 ++++
arch/m68k/include/uapi/asm/setup.h | 6 +++++-
arch/microblaze/include/uapi/asm/setup.h | 4 ++++
arch/mips/include/uapi/asm/setup.h | 4 ++++
arch/parisc/include/uapi/asm/setup.h | 4 ++++
arch/powerpc/include/uapi/asm/setup.h | 4 ++++
arch/riscv/include/uapi/asm/setup.h | 4 ++++
arch/s390/Kconfig | 8 --------
arch/sparc/include/uapi/asm/setup.h | 10 +++++++---
arch/um/include/asm/setup.h | 2 +-
arch/x86/include/asm/setup.h | 2 +-
arch/xtensa/include/uapi/asm/setup.h | 4 ++++
include/uapi/asm-generic/setup.h | 4 ++++
init/Kconfig | 15 ++++++++++++++-
18 files changed, 74 insertions(+), 17 deletions(-)
--
2.55.0.654.g21b8a5bc05-goog
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 1/3] init/Kconfig: generalize config COMMAND_LINE_SIZE to all architectures
2026-08-06 6:05 [PATCH 0/3] init/Kconfig: generalize config COMMAND_LINE_SIZE Wilson Felipe Pereira
@ 2026-08-06 6:05 ` Wilson Felipe Pereira
2026-08-06 6:05 ` Wilson Felipe Pereira
1 sibling, 0 replies; 7+ messages in thread
From: Wilson Felipe Pereira @ 2026-08-06 6:05 UTC (permalink / raw)
To: Arnd Bergmann, Andrew Morton
Cc: Yosry Ahmed, Wilson Felipe Pereira, Maciej Żenczykowski,
Heiko Carstens, Vasily Gorbik, Alexander Gordeev,
Christian Borntraeger, Sven Schnelle, linux-s390
Currently, only s390 has the ability to configure the maximum kernel
command line size via Kconfig (CONFIG_COMMAND_LINE_SIZE). Other
architectures define a hardcoded COMMAND_LINE_SIZE macro in their setup.sh
headers.
In some use cases, such as netboot kernels, rootfs configurations, larger
initramfs setups, require larger sizes. While for embedded workloads, it
can be reduced to save memory.
Move config COMMAND_LINE_SIZE out of arch/s390/Kconfig and into
init/Kconfig under General setup so that all architectures can configure
their maximum command line length. The default values were added to keep
the values unchanged.
Originally-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Wilson Felipe Pereira <wfelipe@google.com>
---
arch/s390/Kconfig | 8 --------
init/Kconfig | 12 ++++++++++++
2 files changed, 12 insertions(+), 8 deletions(-)
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 84404e6778d50..f5536e042ce29 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -511,14 +511,6 @@ endchoice
config 64BIT
def_bool y
-config COMMAND_LINE_SIZE
- int "Maximum size of kernel command line"
- default 4096
- range 896 1048576
- help
- This allows you to specify the maximum length of the kernel command
- line.
-
config SMP
def_bool y
diff --git a/init/Kconfig b/init/Kconfig
index 10f2013b53216..d42bb55cb2152 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -1569,6 +1569,18 @@ config BOOT_CONFIG_EMBED_FILE
This bootconfig will be used if there is no initrd or no other
bootconfig in the initrd.
+config COMMAND_LINE_SIZE
+ int "Maximum size of kernel command line"
+ default 4096 if S390 || LOONGARCH || MIPS || UM
+ default 2048 if X86 || ARM64 || POWERPC || SPARC64
+ default 1024 if ARM || PARISC || RISCV
+ default 256 if ALPHA || ARC || M68K || MICROBLAZE || SPARC32 || XTENSA
+ default 512
+ range 256 1048576
+ help
+ This allows you to specify the maximum length of the kernel command
+ line.
+
config CMDLINE_LOG_WRAP_IDEAL_LEN
int "Length to try to wrap the cmdline when logged at boot"
default 1021
--
2.55.0.654.g21b8a5bc05-goog
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 2/3] arch: use CONFIG_COMMAND_LINE_SIZE across all architectures
2026-08-06 6:05 [PATCH 0/3] init/Kconfig: generalize config COMMAND_LINE_SIZE Wilson Felipe Pereira
@ 2026-08-06 6:05 ` Wilson Felipe Pereira
2026-08-06 6:05 ` Wilson Felipe Pereira
1 sibling, 0 replies; 7+ messages in thread
From: Wilson Felipe Pereira @ 2026-08-06 6:05 UTC (permalink / raw)
To: Arnd Bergmann, Andrew Morton
Cc: Yosry Ahmed, Wilson Felipe Pereira, Maciej Żenczykowski,
Paul Walmsley, Palmer Dabbelt, Albert Ou, Alexandre Ghiti,
linux-riscv, linux-arch
Now that CONFIG_COMMAND_LINE_SIZE is available in init/Kconfig for all
architectures, update every architecture's setup.h header to define
COMMAND_LINE_SIZE as CONFIG_COMMAND_LINE_SIZE.
For user-space API (uapi) headers, wrap the definition in an
`#ifdef __KERNEL__` guard and retain the historical hardcoded default in
the `#else` block. When user-space headers are installed via
`make headers_install`, unifdef strips out the kernel section, ensuring
same value as before for user-space applications including `<asm/setup.h>`.
Originally-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Wilson Felipe Pereira <wfelipe@google.com>
---
arch/alpha/include/uapi/asm/setup.h | 4 ++++
arch/arc/include/asm/setup.h | 2 +-
arch/arm/include/uapi/asm/setup.h | 6 +++++-
arch/arm64/include/uapi/asm/setup.h | 4 ++++
arch/loongarch/include/uapi/asm/setup.h | 4 ++++
arch/m68k/include/uapi/asm/setup.h | 6 +++++-
arch/microblaze/include/uapi/asm/setup.h | 4 ++++
arch/mips/include/uapi/asm/setup.h | 4 ++++
arch/parisc/include/uapi/asm/setup.h | 4 ++++
arch/powerpc/include/uapi/asm/setup.h | 4 ++++
arch/riscv/include/uapi/asm/setup.h | 4 ++++
arch/sparc/include/uapi/asm/setup.h | 10 +++++++---
arch/um/include/asm/setup.h | 2 +-
arch/x86/include/asm/setup.h | 2 +-
arch/xtensa/include/uapi/asm/setup.h | 4 ++++
include/uapi/asm-generic/setup.h | 4 ++++
16 files changed, 60 insertions(+), 8 deletions(-)
diff --git a/arch/alpha/include/uapi/asm/setup.h b/arch/alpha/include/uapi/asm/setup.h
index f881ea5947cbc..169f743ef7658 100644
--- a/arch/alpha/include/uapi/asm/setup.h
+++ b/arch/alpha/include/uapi/asm/setup.h
@@ -2,6 +2,10 @@
#ifndef _UAPI__ALPHA_SETUP_H
#define _UAPI__ALPHA_SETUP_H
+#ifdef __KERNEL__
+#define COMMAND_LINE_SIZE CONFIG_COMMAND_LINE_SIZE
+#else
#define COMMAND_LINE_SIZE 256
+#endif
#endif /* _UAPI__ALPHA_SETUP_H */
diff --git a/arch/arc/include/asm/setup.h b/arch/arc/include/asm/setup.h
index 1c6db599e1fcc..60e158d58cec7 100644
--- a/arch/arc/include/asm/setup.h
+++ b/arch/arc/include/asm/setup.h
@@ -9,7 +9,7 @@
#include <linux/types.h>
#include <uapi/asm/setup.h>
-#define COMMAND_LINE_SIZE 256
+#define COMMAND_LINE_SIZE CONFIG_COMMAND_LINE_SIZE
/*
* Data structure to map a ID to string
diff --git a/arch/arm/include/uapi/asm/setup.h b/arch/arm/include/uapi/asm/setup.h
index 8e50e034fec73..4aa93558af1e7 100644
--- a/arch/arm/include/uapi/asm/setup.h
+++ b/arch/arm/include/uapi/asm/setup.h
@@ -17,7 +17,11 @@
#include <linux/types.h>
-#define COMMAND_LINE_SIZE 1024
+#ifdef __KERNEL__
+#define COMMAND_LINE_SIZE CONFIG_COMMAND_LINE_SIZE
+#else
+#define COMMAND_LINE_SIZE 1024
+#endif
/* The list ends with an ATAG_NONE node. */
#define ATAG_NONE 0x00000000
diff --git a/arch/arm64/include/uapi/asm/setup.h b/arch/arm64/include/uapi/asm/setup.h
index 5d703888f3511..2236890175a5a 100644
--- a/arch/arm64/include/uapi/asm/setup.h
+++ b/arch/arm64/include/uapi/asm/setup.h
@@ -22,6 +22,10 @@
#include <linux/types.h>
+#ifdef __KERNEL__
+#define COMMAND_LINE_SIZE CONFIG_COMMAND_LINE_SIZE
+#else
#define COMMAND_LINE_SIZE 2048
+#endif
#endif
diff --git a/arch/loongarch/include/uapi/asm/setup.h b/arch/loongarch/include/uapi/asm/setup.h
index d46363ce3e024..03c7bfa1e5d9f 100644
--- a/arch/loongarch/include/uapi/asm/setup.h
+++ b/arch/loongarch/include/uapi/asm/setup.h
@@ -3,6 +3,10 @@
#ifndef _UAPI_ASM_LOONGARCH_SETUP_H
#define _UAPI_ASM_LOONGARCH_SETUP_H
+#ifdef __KERNEL__
+#define COMMAND_LINE_SIZE CONFIG_COMMAND_LINE_SIZE
+#else
#define COMMAND_LINE_SIZE 4096
+#endif
#endif /* _UAPI_ASM_LOONGARCH_SETUP_H */
diff --git a/arch/m68k/include/uapi/asm/setup.h b/arch/m68k/include/uapi/asm/setup.h
index 25fe26d5597cc..2d5b24a5345f9 100644
--- a/arch/m68k/include/uapi/asm/setup.h
+++ b/arch/m68k/include/uapi/asm/setup.h
@@ -12,6 +12,10 @@
#ifndef _UAPI_M68K_SETUP_H
#define _UAPI_M68K_SETUP_H
-#define COMMAND_LINE_SIZE 256
+#ifdef __KERNEL__
+#define COMMAND_LINE_SIZE CONFIG_COMMAND_LINE_SIZE
+#else
+#define COMMAND_LINE_SIZE 256
+#endif
#endif /* _UAPI_M68K_SETUP_H */
diff --git a/arch/microblaze/include/uapi/asm/setup.h b/arch/microblaze/include/uapi/asm/setup.h
index 16c56807f86a2..e4b253064c7d9 100644
--- a/arch/microblaze/include/uapi/asm/setup.h
+++ b/arch/microblaze/include/uapi/asm/setup.h
@@ -12,6 +12,10 @@
#ifndef _UAPI_ASM_MICROBLAZE_SETUP_H
#define _UAPI_ASM_MICROBLAZE_SETUP_H
+#ifdef __KERNEL__
+#define COMMAND_LINE_SIZE CONFIG_COMMAND_LINE_SIZE
+#else
#define COMMAND_LINE_SIZE 256
+#endif
#endif /* _UAPI_ASM_MICROBLAZE_SETUP_H */
diff --git a/arch/mips/include/uapi/asm/setup.h b/arch/mips/include/uapi/asm/setup.h
index 7d48c433b0c27..8d6c474835aec 100644
--- a/arch/mips/include/uapi/asm/setup.h
+++ b/arch/mips/include/uapi/asm/setup.h
@@ -2,7 +2,11 @@
#ifndef _UAPI_MIPS_SETUP_H
#define _UAPI_MIPS_SETUP_H
+#ifdef __KERNEL__
+#define COMMAND_LINE_SIZE CONFIG_COMMAND_LINE_SIZE
+#else
#define COMMAND_LINE_SIZE 4096
+#endif
#endif /* _UAPI_MIPS_SETUP_H */
diff --git a/arch/parisc/include/uapi/asm/setup.h b/arch/parisc/include/uapi/asm/setup.h
index 78b2f4ec7d652..cfa77e84205dc 100644
--- a/arch/parisc/include/uapi/asm/setup.h
+++ b/arch/parisc/include/uapi/asm/setup.h
@@ -2,6 +2,10 @@
#ifndef _PARISC_SETUP_H
#define _PARISC_SETUP_H
+#ifdef __KERNEL__
+#define COMMAND_LINE_SIZE CONFIG_COMMAND_LINE_SIZE
+#else
#define COMMAND_LINE_SIZE 1024
+#endif
#endif /* _PARISC_SETUP_H */
diff --git a/arch/powerpc/include/uapi/asm/setup.h b/arch/powerpc/include/uapi/asm/setup.h
index c54940b09d065..daa15ac4e94c6 100644
--- a/arch/powerpc/include/uapi/asm/setup.h
+++ b/arch/powerpc/include/uapi/asm/setup.h
@@ -2,6 +2,10 @@
#ifndef _UAPI_ASM_POWERPC_SETUP_H
#define _UAPI_ASM_POWERPC_SETUP_H
+#ifdef __KERNEL__
+#define COMMAND_LINE_SIZE CONFIG_COMMAND_LINE_SIZE
+#else
#define COMMAND_LINE_SIZE 2048
+#endif
#endif /* _UAPI_ASM_POWERPC_SETUP_H */
diff --git a/arch/riscv/include/uapi/asm/setup.h b/arch/riscv/include/uapi/asm/setup.h
index eb4f0209c6960..a6c1f4b0987e3 100644
--- a/arch/riscv/include/uapi/asm/setup.h
+++ b/arch/riscv/include/uapi/asm/setup.h
@@ -3,6 +3,10 @@
#ifndef _UAPI_ASM_RISCV_SETUP_H
#define _UAPI_ASM_RISCV_SETUP_H
+#ifdef __KERNEL__
+#define COMMAND_LINE_SIZE CONFIG_COMMAND_LINE_SIZE
+#else
#define COMMAND_LINE_SIZE 2048
+#endif
#endif /* _UAPI_ASM_RISCV_SETUP_H */
diff --git a/arch/sparc/include/uapi/asm/setup.h b/arch/sparc/include/uapi/asm/setup.h
index 3c208a4dd4640..7054f5249a3a6 100644
--- a/arch/sparc/include/uapi/asm/setup.h
+++ b/arch/sparc/include/uapi/asm/setup.h
@@ -6,10 +6,14 @@
#ifndef _UAPI_SPARC_SETUP_H
#define _UAPI_SPARC_SETUP_H
-#if defined(__sparc__) && defined(__arch64__)
-# define COMMAND_LINE_SIZE 2048
+#ifdef __KERNEL__
+# define COMMAND_LINE_SIZE CONFIG_COMMAND_LINE_SIZE
#else
-# define COMMAND_LINE_SIZE 256
+# if defined(__sparc__) && defined(__arch64__)
+# define COMMAND_LINE_SIZE 2048
+# else
+# define COMMAND_LINE_SIZE 256
+# endif
#endif
diff --git a/arch/um/include/asm/setup.h b/arch/um/include/asm/setup.h
index 80ada899f2542..bc83dc4d467d3 100644
--- a/arch/um/include/asm/setup.h
+++ b/arch/um/include/asm/setup.h
@@ -6,6 +6,6 @@
* command line, so this choice is ok.
*/
-#define COMMAND_LINE_SIZE 4096
+#define COMMAND_LINE_SIZE CONFIG_COMMAND_LINE_SIZE
#endif /* SETUP_H_INCLUDED */
diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index 914eb32581c73..b73caf64f2199 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -4,7 +4,7 @@
#include <uapi/asm/setup.h>
-#define COMMAND_LINE_SIZE 2048
+#define COMMAND_LINE_SIZE CONFIG_COMMAND_LINE_SIZE
#include <linux/linkage.h>
#include <asm/page_types.h>
diff --git a/arch/xtensa/include/uapi/asm/setup.h b/arch/xtensa/include/uapi/asm/setup.h
index 5356a5fd4d173..dcf33a403527a 100644
--- a/arch/xtensa/include/uapi/asm/setup.h
+++ b/arch/xtensa/include/uapi/asm/setup.h
@@ -12,6 +12,10 @@
#ifndef _XTENSA_SETUP_H
#define _XTENSA_SETUP_H
+#ifdef __KERNEL__
+#define COMMAND_LINE_SIZE CONFIG_COMMAND_LINE_SIZE
+#else
#define COMMAND_LINE_SIZE 256
+#endif
#endif
diff --git a/include/uapi/asm-generic/setup.h b/include/uapi/asm-generic/setup.h
index 88ac5100df359..b8d06e6d56bd7 100644
--- a/include/uapi/asm-generic/setup.h
+++ b/include/uapi/asm-generic/setup.h
@@ -2,6 +2,10 @@
#ifndef __ASM_GENERIC_SETUP_H
#define __ASM_GENERIC_SETUP_H
+#ifdef __KERNEL__
+#define COMMAND_LINE_SIZE CONFIG_COMMAND_LINE_SIZE
+#else
#define COMMAND_LINE_SIZE 512
+#endif
#endif /* __ASM_GENERIC_SETUP_H */
--
2.55.0.654.g21b8a5bc05-goog
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 2/3] arch: use CONFIG_COMMAND_LINE_SIZE across all architectures
@ 2026-08-06 6:05 ` Wilson Felipe Pereira
0 siblings, 0 replies; 7+ messages in thread
From: Wilson Felipe Pereira @ 2026-08-06 6:05 UTC (permalink / raw)
To: Arnd Bergmann, Andrew Morton
Cc: Yosry Ahmed, Wilson Felipe Pereira, Maciej Żenczykowski,
Paul Walmsley, Palmer Dabbelt, Albert Ou, Alexandre Ghiti,
linux-riscv, linux-arch
Now that CONFIG_COMMAND_LINE_SIZE is available in init/Kconfig for all
architectures, update every architecture's setup.h header to define
COMMAND_LINE_SIZE as CONFIG_COMMAND_LINE_SIZE.
For user-space API (uapi) headers, wrap the definition in an
`#ifdef __KERNEL__` guard and retain the historical hardcoded default in
the `#else` block. When user-space headers are installed via
`make headers_install`, unifdef strips out the kernel section, ensuring
same value as before for user-space applications including `<asm/setup.h>`.
Originally-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Wilson Felipe Pereira <wfelipe@google.com>
---
arch/alpha/include/uapi/asm/setup.h | 4 ++++
arch/arc/include/asm/setup.h | 2 +-
arch/arm/include/uapi/asm/setup.h | 6 +++++-
arch/arm64/include/uapi/asm/setup.h | 4 ++++
arch/loongarch/include/uapi/asm/setup.h | 4 ++++
arch/m68k/include/uapi/asm/setup.h | 6 +++++-
arch/microblaze/include/uapi/asm/setup.h | 4 ++++
arch/mips/include/uapi/asm/setup.h | 4 ++++
arch/parisc/include/uapi/asm/setup.h | 4 ++++
arch/powerpc/include/uapi/asm/setup.h | 4 ++++
arch/riscv/include/uapi/asm/setup.h | 4 ++++
arch/sparc/include/uapi/asm/setup.h | 10 +++++++---
arch/um/include/asm/setup.h | 2 +-
arch/x86/include/asm/setup.h | 2 +-
arch/xtensa/include/uapi/asm/setup.h | 4 ++++
include/uapi/asm-generic/setup.h | 4 ++++
16 files changed, 60 insertions(+), 8 deletions(-)
diff --git a/arch/alpha/include/uapi/asm/setup.h b/arch/alpha/include/uapi/asm/setup.h
index f881ea5947cbc..169f743ef7658 100644
--- a/arch/alpha/include/uapi/asm/setup.h
+++ b/arch/alpha/include/uapi/asm/setup.h
@@ -2,6 +2,10 @@
#ifndef _UAPI__ALPHA_SETUP_H
#define _UAPI__ALPHA_SETUP_H
+#ifdef __KERNEL__
+#define COMMAND_LINE_SIZE CONFIG_COMMAND_LINE_SIZE
+#else
#define COMMAND_LINE_SIZE 256
+#endif
#endif /* _UAPI__ALPHA_SETUP_H */
diff --git a/arch/arc/include/asm/setup.h b/arch/arc/include/asm/setup.h
index 1c6db599e1fcc..60e158d58cec7 100644
--- a/arch/arc/include/asm/setup.h
+++ b/arch/arc/include/asm/setup.h
@@ -9,7 +9,7 @@
#include <linux/types.h>
#include <uapi/asm/setup.h>
-#define COMMAND_LINE_SIZE 256
+#define COMMAND_LINE_SIZE CONFIG_COMMAND_LINE_SIZE
/*
* Data structure to map a ID to string
diff --git a/arch/arm/include/uapi/asm/setup.h b/arch/arm/include/uapi/asm/setup.h
index 8e50e034fec73..4aa93558af1e7 100644
--- a/arch/arm/include/uapi/asm/setup.h
+++ b/arch/arm/include/uapi/asm/setup.h
@@ -17,7 +17,11 @@
#include <linux/types.h>
-#define COMMAND_LINE_SIZE 1024
+#ifdef __KERNEL__
+#define COMMAND_LINE_SIZE CONFIG_COMMAND_LINE_SIZE
+#else
+#define COMMAND_LINE_SIZE 1024
+#endif
/* The list ends with an ATAG_NONE node. */
#define ATAG_NONE 0x00000000
diff --git a/arch/arm64/include/uapi/asm/setup.h b/arch/arm64/include/uapi/asm/setup.h
index 5d703888f3511..2236890175a5a 100644
--- a/arch/arm64/include/uapi/asm/setup.h
+++ b/arch/arm64/include/uapi/asm/setup.h
@@ -22,6 +22,10 @@
#include <linux/types.h>
+#ifdef __KERNEL__
+#define COMMAND_LINE_SIZE CONFIG_COMMAND_LINE_SIZE
+#else
#define COMMAND_LINE_SIZE 2048
+#endif
#endif
diff --git a/arch/loongarch/include/uapi/asm/setup.h b/arch/loongarch/include/uapi/asm/setup.h
index d46363ce3e024..03c7bfa1e5d9f 100644
--- a/arch/loongarch/include/uapi/asm/setup.h
+++ b/arch/loongarch/include/uapi/asm/setup.h
@@ -3,6 +3,10 @@
#ifndef _UAPI_ASM_LOONGARCH_SETUP_H
#define _UAPI_ASM_LOONGARCH_SETUP_H
+#ifdef __KERNEL__
+#define COMMAND_LINE_SIZE CONFIG_COMMAND_LINE_SIZE
+#else
#define COMMAND_LINE_SIZE 4096
+#endif
#endif /* _UAPI_ASM_LOONGARCH_SETUP_H */
diff --git a/arch/m68k/include/uapi/asm/setup.h b/arch/m68k/include/uapi/asm/setup.h
index 25fe26d5597cc..2d5b24a5345f9 100644
--- a/arch/m68k/include/uapi/asm/setup.h
+++ b/arch/m68k/include/uapi/asm/setup.h
@@ -12,6 +12,10 @@
#ifndef _UAPI_M68K_SETUP_H
#define _UAPI_M68K_SETUP_H
-#define COMMAND_LINE_SIZE 256
+#ifdef __KERNEL__
+#define COMMAND_LINE_SIZE CONFIG_COMMAND_LINE_SIZE
+#else
+#define COMMAND_LINE_SIZE 256
+#endif
#endif /* _UAPI_M68K_SETUP_H */
diff --git a/arch/microblaze/include/uapi/asm/setup.h b/arch/microblaze/include/uapi/asm/setup.h
index 16c56807f86a2..e4b253064c7d9 100644
--- a/arch/microblaze/include/uapi/asm/setup.h
+++ b/arch/microblaze/include/uapi/asm/setup.h
@@ -12,6 +12,10 @@
#ifndef _UAPI_ASM_MICROBLAZE_SETUP_H
#define _UAPI_ASM_MICROBLAZE_SETUP_H
+#ifdef __KERNEL__
+#define COMMAND_LINE_SIZE CONFIG_COMMAND_LINE_SIZE
+#else
#define COMMAND_LINE_SIZE 256
+#endif
#endif /* _UAPI_ASM_MICROBLAZE_SETUP_H */
diff --git a/arch/mips/include/uapi/asm/setup.h b/arch/mips/include/uapi/asm/setup.h
index 7d48c433b0c27..8d6c474835aec 100644
--- a/arch/mips/include/uapi/asm/setup.h
+++ b/arch/mips/include/uapi/asm/setup.h
@@ -2,7 +2,11 @@
#ifndef _UAPI_MIPS_SETUP_H
#define _UAPI_MIPS_SETUP_H
+#ifdef __KERNEL__
+#define COMMAND_LINE_SIZE CONFIG_COMMAND_LINE_SIZE
+#else
#define COMMAND_LINE_SIZE 4096
+#endif
#endif /* _UAPI_MIPS_SETUP_H */
diff --git a/arch/parisc/include/uapi/asm/setup.h b/arch/parisc/include/uapi/asm/setup.h
index 78b2f4ec7d652..cfa77e84205dc 100644
--- a/arch/parisc/include/uapi/asm/setup.h
+++ b/arch/parisc/include/uapi/asm/setup.h
@@ -2,6 +2,10 @@
#ifndef _PARISC_SETUP_H
#define _PARISC_SETUP_H
+#ifdef __KERNEL__
+#define COMMAND_LINE_SIZE CONFIG_COMMAND_LINE_SIZE
+#else
#define COMMAND_LINE_SIZE 1024
+#endif
#endif /* _PARISC_SETUP_H */
diff --git a/arch/powerpc/include/uapi/asm/setup.h b/arch/powerpc/include/uapi/asm/setup.h
index c54940b09d065..daa15ac4e94c6 100644
--- a/arch/powerpc/include/uapi/asm/setup.h
+++ b/arch/powerpc/include/uapi/asm/setup.h
@@ -2,6 +2,10 @@
#ifndef _UAPI_ASM_POWERPC_SETUP_H
#define _UAPI_ASM_POWERPC_SETUP_H
+#ifdef __KERNEL__
+#define COMMAND_LINE_SIZE CONFIG_COMMAND_LINE_SIZE
+#else
#define COMMAND_LINE_SIZE 2048
+#endif
#endif /* _UAPI_ASM_POWERPC_SETUP_H */
diff --git a/arch/riscv/include/uapi/asm/setup.h b/arch/riscv/include/uapi/asm/setup.h
index eb4f0209c6960..a6c1f4b0987e3 100644
--- a/arch/riscv/include/uapi/asm/setup.h
+++ b/arch/riscv/include/uapi/asm/setup.h
@@ -3,6 +3,10 @@
#ifndef _UAPI_ASM_RISCV_SETUP_H
#define _UAPI_ASM_RISCV_SETUP_H
+#ifdef __KERNEL__
+#define COMMAND_LINE_SIZE CONFIG_COMMAND_LINE_SIZE
+#else
#define COMMAND_LINE_SIZE 2048
+#endif
#endif /* _UAPI_ASM_RISCV_SETUP_H */
diff --git a/arch/sparc/include/uapi/asm/setup.h b/arch/sparc/include/uapi/asm/setup.h
index 3c208a4dd4640..7054f5249a3a6 100644
--- a/arch/sparc/include/uapi/asm/setup.h
+++ b/arch/sparc/include/uapi/asm/setup.h
@@ -6,10 +6,14 @@
#ifndef _UAPI_SPARC_SETUP_H
#define _UAPI_SPARC_SETUP_H
-#if defined(__sparc__) && defined(__arch64__)
-# define COMMAND_LINE_SIZE 2048
+#ifdef __KERNEL__
+# define COMMAND_LINE_SIZE CONFIG_COMMAND_LINE_SIZE
#else
-# define COMMAND_LINE_SIZE 256
+# if defined(__sparc__) && defined(__arch64__)
+# define COMMAND_LINE_SIZE 2048
+# else
+# define COMMAND_LINE_SIZE 256
+# endif
#endif
diff --git a/arch/um/include/asm/setup.h b/arch/um/include/asm/setup.h
index 80ada899f2542..bc83dc4d467d3 100644
--- a/arch/um/include/asm/setup.h
+++ b/arch/um/include/asm/setup.h
@@ -6,6 +6,6 @@
* command line, so this choice is ok.
*/
-#define COMMAND_LINE_SIZE 4096
+#define COMMAND_LINE_SIZE CONFIG_COMMAND_LINE_SIZE
#endif /* SETUP_H_INCLUDED */
diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index 914eb32581c73..b73caf64f2199 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -4,7 +4,7 @@
#include <uapi/asm/setup.h>
-#define COMMAND_LINE_SIZE 2048
+#define COMMAND_LINE_SIZE CONFIG_COMMAND_LINE_SIZE
#include <linux/linkage.h>
#include <asm/page_types.h>
diff --git a/arch/xtensa/include/uapi/asm/setup.h b/arch/xtensa/include/uapi/asm/setup.h
index 5356a5fd4d173..dcf33a403527a 100644
--- a/arch/xtensa/include/uapi/asm/setup.h
+++ b/arch/xtensa/include/uapi/asm/setup.h
@@ -12,6 +12,10 @@
#ifndef _XTENSA_SETUP_H
#define _XTENSA_SETUP_H
+#ifdef __KERNEL__
+#define COMMAND_LINE_SIZE CONFIG_COMMAND_LINE_SIZE
+#else
#define COMMAND_LINE_SIZE 256
+#endif
#endif
diff --git a/include/uapi/asm-generic/setup.h b/include/uapi/asm-generic/setup.h
index 88ac5100df359..b8d06e6d56bd7 100644
--- a/include/uapi/asm-generic/setup.h
+++ b/include/uapi/asm-generic/setup.h
@@ -2,6 +2,10 @@
#ifndef __ASM_GENERIC_SETUP_H
#define __ASM_GENERIC_SETUP_H
+#ifdef __KERNEL__
+#define COMMAND_LINE_SIZE CONFIG_COMMAND_LINE_SIZE
+#else
#define COMMAND_LINE_SIZE 512
+#endif
#endif /* __ASM_GENERIC_SETUP_H */
--
2.55.0.654.g21b8a5bc05-goog
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 0/3] init/Kconfig: generalize config COMMAND_LINE_SIZE
@ 2026-08-06 6:14 Wilson Felipe Pereira
2026-08-06 6:14 ` Wilson Felipe Pereira
0 siblings, 1 reply; 7+ messages in thread
From: Wilson Felipe Pereira @ 2026-08-06 6:14 UTC (permalink / raw)
To: Arnd Bergmann, Andrew Morton
Cc: Paul Walmsley, Palmer Dabbelt, Albert Ou, Alexandre Ghiti,
Heiko Carstens, Vasily Gorbik, Alexander Gordeev,
Christian Borntraeger, Sven Schnelle, linux-arch, linux-riscv,
linux-s390, Wilson Felipe Pereira
[Note: Resending the full series to ensure all patches are delivered with a
unified recipient and CC list across all mailing lists.]
This patch series promotes COMMAND_LINE_SIZE from arch/s390/Kconfig to
init/Kconfig to be generally available to other architectures.
In some use cases, such as netboot kernels, rootfs configurations, larger
initramfs setups, require larger sizes. While for embedded workloads, it
can be reduced to save memory.
Since COMMAND_LINE_SIZE can be larger, it also makes sense to allow
INIT_ENV_ARG_LIMIT to be configured.
Wilson Felipe Pereira (3):
init/Kconfig: generalize config COMMAND_LINE_SIZE to all architectures
arch: use CONFIG_COMMAND_LINE_SIZE across all architectures
init/Kconfig: make config INIT_ENV_ARG_LIMIT user-configurable
arch/alpha/include/uapi/asm/setup.h | 4 ++++
arch/arc/include/asm/setup.h | 2 +-
arch/arm/include/uapi/asm/setup.h | 6 +++++-
arch/arm64/include/uapi/asm/setup.h | 4 ++++
arch/loongarch/include/uapi/asm/setup.h | 4 ++++
arch/m68k/include/uapi/asm/setup.h | 6 +++++-
arch/microblaze/include/uapi/asm/setup.h | 4 ++++
arch/mips/include/uapi/asm/setup.h | 4 ++++
arch/parisc/include/uapi/asm/setup.h | 4 ++++
arch/powerpc/include/uapi/asm/setup.h | 4 ++++
arch/riscv/include/uapi/asm/setup.h | 4 ++++
arch/s390/Kconfig | 8 --------
arch/sparc/include/uapi/asm/setup.h | 10 +++++++---
arch/um/include/asm/setup.h | 2 +-
arch/x86/include/asm/setup.h | 2 +-
arch/xtensa/include/uapi/asm/setup.h | 4 ++++
include/uapi/asm-generic/setup.h | 4 ++++
init/Kconfig | 15 ++++++++++++++-
18 files changed, 74 insertions(+), 17 deletions(-)
--
2.55.0.654.g21b8a5bc05-goog
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 1/3] init/Kconfig: generalize config COMMAND_LINE_SIZE to all architectures
2026-08-06 6:14 [PATCH 0/3] init/Kconfig: generalize config COMMAND_LINE_SIZE Wilson Felipe Pereira
@ 2026-08-06 6:14 ` Wilson Felipe Pereira
0 siblings, 0 replies; 7+ messages in thread
From: Wilson Felipe Pereira @ 2026-08-06 6:14 UTC (permalink / raw)
To: Arnd Bergmann, Andrew Morton
Cc: Paul Walmsley, Palmer Dabbelt, Albert Ou, Alexandre Ghiti,
Heiko Carstens, Vasily Gorbik, Alexander Gordeev,
Christian Borntraeger, Sven Schnelle, linux-arch, linux-riscv,
linux-s390, Wilson Felipe Pereira, Maciej Żenczykowski
Currently, only s390 has the ability to configure the maximum kernel
command line size via Kconfig (CONFIG_COMMAND_LINE_SIZE). Other
architectures define a hardcoded COMMAND_LINE_SIZE macro in their setup.sh
headers.
In some use cases, such as netboot kernels, rootfs configurations, larger
initramfs setups, require larger sizes. While for embedded workloads, it
can be reduced to save memory.
Move config COMMAND_LINE_SIZE out of arch/s390/Kconfig and into
init/Kconfig under General setup so that all architectures can configure
their maximum command line length. The default values were added to keep
the values unchanged.
Originally-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Wilson Felipe Pereira <wfelipe@google.com>
---
arch/s390/Kconfig | 8 --------
init/Kconfig | 12 ++++++++++++
2 files changed, 12 insertions(+), 8 deletions(-)
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 84404e6778d50..f5536e042ce29 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -511,14 +511,6 @@ endchoice
config 64BIT
def_bool y
-config COMMAND_LINE_SIZE
- int "Maximum size of kernel command line"
- default 4096
- range 896 1048576
- help
- This allows you to specify the maximum length of the kernel command
- line.
-
config SMP
def_bool y
diff --git a/init/Kconfig b/init/Kconfig
index 10f2013b53216..d42bb55cb2152 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -1569,6 +1569,18 @@ config BOOT_CONFIG_EMBED_FILE
This bootconfig will be used if there is no initrd or no other
bootconfig in the initrd.
+config COMMAND_LINE_SIZE
+ int "Maximum size of kernel command line"
+ default 4096 if S390 || LOONGARCH || MIPS || UM
+ default 2048 if X86 || ARM64 || POWERPC || SPARC64
+ default 1024 if ARM || PARISC || RISCV
+ default 256 if ALPHA || ARC || M68K || MICROBLAZE || SPARC32 || XTENSA
+ default 512
+ range 256 1048576
+ help
+ This allows you to specify the maximum length of the kernel command
+ line.
+
config CMDLINE_LOG_WRAP_IDEAL_LEN
int "Length to try to wrap the cmdline when logged at boot"
default 1021
--
2.55.0.654.g21b8a5bc05-goog
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 1/3] init/Kconfig: generalize config COMMAND_LINE_SIZE to all architectures
@ 2026-08-06 6:14 ` Wilson Felipe Pereira
0 siblings, 0 replies; 7+ messages in thread
From: Wilson Felipe Pereira @ 2026-08-06 6:14 UTC (permalink / raw)
To: Arnd Bergmann, Andrew Morton
Cc: Paul Walmsley, Palmer Dabbelt, Albert Ou, Alexandre Ghiti,
Heiko Carstens, Vasily Gorbik, Alexander Gordeev,
Christian Borntraeger, Sven Schnelle, linux-arch, linux-riscv,
linux-s390, Wilson Felipe Pereira, Maciej Żenczykowski
Currently, only s390 has the ability to configure the maximum kernel
command line size via Kconfig (CONFIG_COMMAND_LINE_SIZE). Other
architectures define a hardcoded COMMAND_LINE_SIZE macro in their setup.sh
headers.
In some use cases, such as netboot kernels, rootfs configurations, larger
initramfs setups, require larger sizes. While for embedded workloads, it
can be reduced to save memory.
Move config COMMAND_LINE_SIZE out of arch/s390/Kconfig and into
init/Kconfig under General setup so that all architectures can configure
their maximum command line length. The default values were added to keep
the values unchanged.
Originally-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Wilson Felipe Pereira <wfelipe@google.com>
---
arch/s390/Kconfig | 8 --------
init/Kconfig | 12 ++++++++++++
2 files changed, 12 insertions(+), 8 deletions(-)
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 84404e6778d50..f5536e042ce29 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -511,14 +511,6 @@ endchoice
config 64BIT
def_bool y
-config COMMAND_LINE_SIZE
- int "Maximum size of kernel command line"
- default 4096
- range 896 1048576
- help
- This allows you to specify the maximum length of the kernel command
- line.
-
config SMP
def_bool y
diff --git a/init/Kconfig b/init/Kconfig
index 10f2013b53216..d42bb55cb2152 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -1569,6 +1569,18 @@ config BOOT_CONFIG_EMBED_FILE
This bootconfig will be used if there is no initrd or no other
bootconfig in the initrd.
+config COMMAND_LINE_SIZE
+ int "Maximum size of kernel command line"
+ default 4096 if S390 || LOONGARCH || MIPS || UM
+ default 2048 if X86 || ARM64 || POWERPC || SPARC64
+ default 1024 if ARM || PARISC || RISCV
+ default 256 if ALPHA || ARC || M68K || MICROBLAZE || SPARC32 || XTENSA
+ default 512
+ range 256 1048576
+ help
+ This allows you to specify the maximum length of the kernel command
+ line.
+
config CMDLINE_LOG_WRAP_IDEAL_LEN
int "Length to try to wrap the cmdline when logged at boot"
default 1021
--
2.55.0.654.g21b8a5bc05-goog
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH 1/3] init/Kconfig: generalize config COMMAND_LINE_SIZE to all architectures
2026-08-06 6:14 ` Wilson Felipe Pereira
(?)
@ 2026-08-06 6:26 ` sashiko-bot
-1 siblings, 0 replies; 7+ messages in thread
From: sashiko-bot @ 2026-08-06 6:26 UTC (permalink / raw)
To: Wilson Felipe Pereira
Cc: Alexander Gordeev, Heiko Carstens, Vasily Gorbik, linux-s390
Thank you for your contribution! Sashiko AI review found 5 potential issue(s) to consider:
- [High] Moving COMMAND_LINE_SIZE to init/Kconfig removes the minimum size limit of 896 bytes for s390, allowing legacy bootloaders to overflow the parmarea and corrupt the kernel .text section.
- [Medium] The newly introduced COMMAND_LINE_SIZE Kconfig option is silently bypassed and acts as a placebo for all architectures except s390.
- [Medium] Making COMMAND_LINE_SIZE globally configurable via Kconfig conflicts with its static definition in userspace-exported UAPI headers.
- [Medium] The Kconfig default definition for COMMAND_LINE_SIZE references the non-existent symbol 'UM'.
- [Medium] The default value of CONFIG_COMMAND_LINE_SIZE for RISC-V is incorrectly set to 1024, which is a reduction from its existing hardcoded size of 2048.
--
--- Patch [1]: [PATCH 1/3] init/Kconfig: generalize config COMMAND_LINE_SIZE to all architectures ---
commit 331242b120be7dde8a2decc92398462a27944ed5
Author: Wilson Felipe Pereira <wfelipe@google.com>
Subject: init/Kconfig: generalize config COMMAND_LINE_SIZE to all architectures
This commit moves CONFIG_COMMAND_LINE_SIZE from s390 to init/Kconfig to
allow all architectures to configure their maximum command line length. It
also sets default values intended to match the existing hardcoded sizes.
[ ... ]
> diff --git a/init/Kconfig b/init/Kconfig
> index 5230d4879b1c8..c581817966ee2 100644
> --- a/init/Kconfig
> +++ b/init/Kconfig
> @@ -1566,6 +1566,18 @@ config BOOT_CONFIG_EMBED_FILE
> This bootconfig will be used if there is no initrd or no other
> bootconfig in the initrd.
>
> +config COMMAND_LINE_SIZE
[Severity: Medium]
Will this Kconfig option actually be used by other architectures?
For example, in arch/x86/include/asm/setup.h, COMMAND_LINE_SIZE is still
defined as a hardcoded macro:
#define COMMAND_LINE_SIZE 2048
Because the C preprocessor will continue to use the hardcoded macro rather
than the CONFIG_COMMAND_LINE_SIZE Kbuild variable, won't any changes made
by users in menuconfig be silently ignored on architectures other than s390?
[Severity: Medium]
Furthermore, does making this globally configurable conflict with its static
definition in userspace-exported UAPI headers?
Many architectures expose this as a hardcoded constant in their
include/uapi/asm/setup.h headers:
arch/arm64/include/uapi/asm/setup.h:
#define COMMAND_LINE_SIZE 2048
Since UAPI headers cannot depend on kernel build configurations (they do
not include <generated/autoconf.h>), if an architecture maintainer tries to
fix the bypass by replacing the hardcoded value with the Kconfig variable,
wouldn't that break the userspace ABI for tools like kexec-tools which rely
on the UAPI header?
> + int "Maximum size of kernel command line"
> + default 4096 if S390 || LOONGARCH || MIPS || UM
[Severity: Medium]
Is UM the correct Kconfig symbol here?
The User-Mode Linux architecture uses the config symbol UML. If UM
evaluates to false because it does not exist, won't User-Mode Linux builds
silently fall back to the incorrect default of 512 instead of 4096?
> + default 2048 if X86 || ARM64 || POWERPC || SPARC64
> + default 1024 if ARM || PARISC || RISCV
[Severity: Medium]
The commit message mentions adding defaults to keep values unchanged, but
is 1024 the correct default for RISC-V?
Checking arch/riscv/include/uapi/asm/setup.h shows that the current size
is 2048. If this Kconfig option is respected, would this cause a regression
by halving the allowed command line size for RISC-V?
> + default 256 if ALPHA || ARC || M68K || MICROBLAZE || SPARC32 || XTENSA
> + default 512
> + range 256 1048576
[Severity: High]
Does lowering the minimum range to 256 introduce memory corruption risks
for s390?
The previous range in arch/s390/Kconfig enforced a minimum of 896 bytes. On
s390, the command_line buffer is placed at the end of struct parmarea, and
the executable .text section immediately follows it in the linker script:
arch/s390/boot/vmlinux.lds.S:
.text : {
_text = .; /* Text */
If an administrator configures a small size like 256, and a legacy
bootloader writes up to the historical 896 bytes into the parmarea,
wouldn't it overrun the buffer and corrupt the .text section?
> + help
> + This allows you to specify the maximum length of the kernel command
> + line.
--
Sashiko AI review · https://sashiko.dev/#/patchset/20260806061429.474992-1-wfelipe@google.com?part=1
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2026-08-06 6:26 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-08-06 6:05 [PATCH 0/3] init/Kconfig: generalize config COMMAND_LINE_SIZE Wilson Felipe Pereira
2026-08-06 6:05 ` [PATCH 1/3] init/Kconfig: generalize config COMMAND_LINE_SIZE to all architectures Wilson Felipe Pereira
2026-08-06 6:05 ` [PATCH 2/3] arch: use CONFIG_COMMAND_LINE_SIZE across " Wilson Felipe Pereira
2026-08-06 6:05 ` Wilson Felipe Pereira
-- strict thread matches above, loose matches on Subject: below --
2026-08-06 6:14 [PATCH 0/3] init/Kconfig: generalize config COMMAND_LINE_SIZE Wilson Felipe Pereira
2026-08-06 6:14 ` [PATCH 1/3] init/Kconfig: generalize config COMMAND_LINE_SIZE to all architectures Wilson Felipe Pereira
2026-08-06 6:14 ` Wilson Felipe Pereira
2026-08-06 6:26 ` sashiko-bot
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.