[PATCH v1 0/2] Add Delta::to_jiffies_timeout() with tests

[PATCH v1 0/2] Add Delta::to_jiffies_timeout() with tests

[FUJITA Tomonori]

From: FUJITA Tomonori <fujita.tomonori@gmail.com>

The first patch is new. It adds an example and a KUnit test for
Delta::as_millis_ceil(), which Miguel asked for [1].

The second patch was previously posted as patch 4 of [2]; patches 1-3
of that series have been applied. It has been reworked to fix the bug
Miguel reported [1]: on 32 bit with HZ=1000, to_jiffies_timeout()
could return a value larger than MAX_JIFFY_OFFSET.

Both patches follow the format agreed in [3]: the examples show the
behaviour, while the boundary inputs live in `#[test]` KUnit tests, with the
magic numbers as named constants local to the test module rather than part
of the exported API. 

[1] https://lore.kernel.org/rust-for-linux/CANiq72kHP1s7bGr4=xfJGR8KY=aUpjOB4OwLEG5E=TKULXg5Rg@mail.gmail.com/
[2] https://lore.kernel.org/rust-for-linux/20260808062839.1159990-1-tomo@flapping.org/
[3] https://lore.kernel.org/rust-for-linux/874ihxgxy0.fsf@kernel.org/

FUJITA Tomonori (2):
  rust: time: add example and KUnit test for Delta::as_millis_ceil()
  rust: time: add Delta::to_jiffies_timeout() for timeout conversion

 rust/kernel/Kconfig.test |  10 ++++
 rust/kernel/time.rs      | 108 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 118 insertions(+)


base-commit: 8fe5e5f62bdb9660999449a4b5eaebcc37d7f842
-- 
2.43.0

[PATCH v1 1/2] rust: time: add example and KUnit test for Delta::as_millis_ceil()

[FUJITA Tomonori]

From: FUJITA Tomonori <fujita.tomonori@gmail.com>

Add an example showing that the value is rounded towards positive
infinity, for both positive and negative spans.

as_millis_ceil() uses the same idiom as as_micros_ceil(), which dropped
the rounding bias near i64::MAX before commit ec90dfcf05f0 ("rust: time:
fix as_micros_ceil() rounding near i64::MAX"), so add a KUnit test for
the i64::MAX and i64::MIN extremes.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
---
 rust/kernel/Kconfig.test | 10 ++++++++++
 rust/kernel/time.rs      | 42 ++++++++++++++++++++++++++++++++++++++++
 2 files changed, 52 insertions(+)

diff --git a/rust/kernel/Kconfig.test b/rust/kernel/Kconfig.test
index e6a5c7a795f0..0087749995d2 100644
--- a/rust/kernel/Kconfig.test
+++ b/rust/kernel/Kconfig.test
@@ -83,4 +83,14 @@ config RUST_BITFIELD_KUNIT_TEST
 
 	  If unsure, say N.
 
+config RUST_TIME_KUNIT_TEST
+	bool "KUnit tests for the Rust time API" if !KUNIT_ALL_TESTS
+	default KUNIT_ALL_TESTS
+	help
+	  This option enables KUnit tests for the Rust time API.
+	  These are only for development and testing, not for regular
+	  kernel use cases.
+
+	  If unsure, say N.
+
 endif
diff --git a/rust/kernel/time.rs b/rust/kernel/time.rs
index 6c0a5e8090d0..b0b43ad3aa47 100644
--- a/rust/kernel/time.rs
+++ b/rust/kernel/time.rs
@@ -530,6 +530,21 @@ pub fn as_millis(self) -> i64 {
 
     /// Return the smallest number of milliseconds greater than or equal
     /// to the value in the [`Delta`].
+    ///
+    /// # Examples
+    ///
+    /// ```
+    /// use kernel::time::Delta;
+    ///
+    /// // Whole milliseconds are returned as-is.
+    /// assert_eq!(Delta::from_millis(2).as_millis_ceil(), 2);
+    /// assert_eq!(Delta::from_nanos(1_000_000).as_millis_ceil(), 1);
+    /// assert_eq!(Delta::from_nanos(-1_000_000).as_millis_ceil(), -1);
+    ///
+    /// // Anything else is rounded towards positive infinity.
+    /// assert_eq!(Delta::from_nanos(1_000_001).as_millis_ceil(), 2);
+    /// assert_eq!(Delta::from_nanos(-1_000_001).as_millis_ceil(), -1);
+    /// ```
     #[inline]
     pub fn as_millis_ceil(self) -> i64 {
         // Only positive values need to be rounded up: truncating division already
@@ -580,3 +595,30 @@ pub fn rem_nanos(self, dividend: i32) -> Self {
         }
     }
 }
+
+#[cfg(CONFIG_RUST_TIME_KUNIT_TEST)]
+#[macros::kunit_tests(rust_kernel_time)]
+mod tests {
+    use super::*;
+
+    /// `i64::MAX` nanoseconds in milliseconds, rounded towards positive infinity.
+    const MAX_MILLIS_CEIL: i64 = 9_223_372_036_855;
+
+    /// `i64::MIN` nanoseconds in milliseconds, rounded towards positive infinity.
+    const MIN_MILLIS_CEIL: i64 = -9_223_372_036_854;
+
+    #[test]
+    fn as_millis_ceil_extremes() {
+        // The rounding bias must survive near `i64::MAX`.
+        assert_eq!(
+            Delta::from_nanos(i64::MAX).as_millis_ceil(),
+            MAX_MILLIS_CEIL
+        );
+
+        // No bias is applied to negative values, so `i64::MIN` cannot overflow.
+        assert_eq!(
+            Delta::from_nanos(i64::MIN).as_millis_ceil(),
+            MIN_MILLIS_CEIL
+        );
+    }
+}
-- 
2.43.0

[PATCH v1 2/2] rust: time: add Delta::to_jiffies_timeout() for timeout conversion

[FUJITA Tomonori]

From: FUJITA Tomonori <fujita.tomonori@gmail.com>

Add Delta<Nsec>::to_jiffies_timeout() conversion. Unless the result
saturates, the value is rounded up, so the resulting timeout is never
shorter than the requested span.

The result saturates at zero jiffies for a negative span, i.e. an
immediate timeout, and at the kernel's MAX_JIFFY_OFFSET "wait forever"
value for a span that is too large.

Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
---
 rust/kernel/time.rs | 66 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 66 insertions(+)

diff --git a/rust/kernel/time.rs b/rust/kernel/time.rs
index b0b43ad3aa47..4ec1748c2602 100644
--- a/rust/kernel/time.rs
+++ b/rust/kernel/time.rs
@@ -39,6 +39,10 @@
 /// The number of nanoseconds per second.
 pub const NSEC_PER_SEC: i64 = bindings::NSEC_PER_SEC as i64;
 
+/// The C side `MAX_JIFFY_OFFSET`, i.e. `((LONG_MAX >> 1) - 1)`, which the kernel
+/// treats as an infinite timeout.
+const MAX_JIFFY_OFFSET: isize = (isize::MAX >> 1) - 1;
+
 /// The time unit of Linux kernel. One jiffy equals (1/HZ) second.
 pub type Jiffies = crate::ffi::c_ulong;
 
@@ -569,6 +573,51 @@ pub fn as_millis_ceil(self) -> i64 {
         }
     }
 
+    /// Convert this span to a [`Delta<Jiffy>`] suitable for use as a timeout.
+    ///
+    /// Unless the result saturates, the value is rounded up to the next whole
+    /// jiffy, so the resulting timeout is never shorter than `self` (as
+    /// [`msecs_to_jiffies()`] does).
+    ///
+    /// The result saturates at zero jiffies for a negative span, i.e. an
+    /// immediate timeout, and at the kernel's [`MAX_JIFFY_OFFSET`] for a span
+    /// that is too large, which the C side treats as an infinite timeout.
+    ///
+    /// # Examples
+    ///
+    /// ```
+    /// use kernel::time::Delta;
+    ///
+    /// // A negative span is an immediate timeout.
+    /// assert_eq!(Delta::from_millis(-1).to_jiffies_timeout().as_jiffies(), 0);
+    ///
+    /// // A span shorter than a jiffy still waits, i.e. the timeout is never
+    /// // shorter than the span.
+    /// assert!(Delta::from_nanos(1).to_jiffies_timeout().as_jiffies() >= 1);
+    /// ```
+    ///
+    /// [`msecs_to_jiffies()`]: srctree/include/linux/jiffies.h
+    /// [`MAX_JIFFY_OFFSET`]: srctree/include/linux/jiffies.h
+    #[inline]
+    pub fn to_jiffies_timeout(self) -> Delta<Jiffy> {
+        let msecs = self.as_millis_ceil();
+
+        // CAST: `msecs` is clamped to `0..=c_uint::MAX`, so it is non-negative and
+        // fits in `c_uint`.
+        let msecs = msecs.clamp(0, i64::from(crate::ffi::c_uint::MAX)) as crate::ffi::c_uint;
+
+        // SAFETY: `__msecs_to_jiffies()` is always safe to call.
+        let jiffies = unsafe { bindings::__msecs_to_jiffies(msecs) };
+
+        // `__msecs_to_jiffies()` only saturates when its argument is negative as an
+        // `int`: with `HZ=1000` it returns `msecs` as-is, which exceeds
+        // `MAX_JIFFY_OFFSET` on 32 bit.
+        let jiffies = jiffies.min(MAX_JIFFY_OFFSET as crate::ffi::c_ulong);
+
+        // CAST: `jiffies` is clamped to `MAX_JIFFY_OFFSET`, which is `<= isize::MAX`.
+        Delta::<Jiffy>::from_jiffies(jiffies as isize)
+    }
+
     /// Return `self % dividend` where `dividend` is in nanoseconds.
     ///
     /// The kernel doesn't have any emulation for `s64 % s64` on 32 bit platforms, so this is
@@ -621,4 +670,21 @@ fn as_millis_ceil_extremes() {
             MIN_MILLIS_CEIL
         );
     }
+
+    #[test]
+    fn to_jiffies_timeout_saturates() {
+        // `__msecs_to_jiffies()` does not clamp its result for every `HZ` configuration,
+        // e.g. with `HZ=1000` it returns the millisecond value as-is, which exceeds
+        // `MAX_JIFFY_OFFSET` on 32 bit.
+        let max = Delta::from_millis(i64::from(i32::MAX)).to_jiffies_timeout();
+        assert!(max.as_jiffies() <= MAX_JIFFY_OFFSET);
+
+        // An overlong span is an infinite timeout.
+        let overlong = Delta::from_nanos(i64::MAX).to_jiffies_timeout();
+        assert_eq!(overlong.as_jiffies(), MAX_JIFFY_OFFSET);
+
+        // A negative span is an immediate timeout, however long it is.
+        let negative = Delta::from_nanos(i64::MIN).to_jiffies_timeout();
+        assert_eq!(negative.as_jiffies(), 0);
+    }
 }
-- 
2.43.0

Re: [PATCH v1 2/2] rust: time: add Delta::to_jiffies_timeout() for timeout conversion

[Gary Guo]

On Tue Aug 11, 2026 at 4:01 PM BST, FUJITA Tomonori wrote:
> From: FUJITA Tomonori <fujita.tomonori@gmail.com>
>
> Add Delta<Nsec>::to_jiffies_timeout() conversion. Unless the result
> saturates, the value is rounded up, so the resulting timeout is never
> shorter than the requested span.
>
> The result saturates at zero jiffies for a negative span, i.e. an
> immediate timeout, and at the kernel's MAX_JIFFY_OFFSET "wait forever"
> value for a span that is too large.
>
> Reviewed-by: Gary Guo <gary@garyguo.net>

You should drop old review tags given this has been changed non trivially.

> Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
> Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
> ---
>  rust/kernel/time.rs | 66 +++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 66 insertions(+)
>
> diff --git a/rust/kernel/time.rs b/rust/kernel/time.rs
> index b0b43ad3aa47..4ec1748c2602 100644
> --- a/rust/kernel/time.rs
> +++ b/rust/kernel/time.rs
> @@ -39,6 +39,10 @@
>  /// The number of nanoseconds per second.
>  pub const NSEC_PER_SEC: i64 = bindings::NSEC_PER_SEC as i64;
>  
> +/// The C side `MAX_JIFFY_OFFSET`, i.e. `((LONG_MAX >> 1) - 1)`, which the kernel
> +/// treats as an infinite timeout.
> +const MAX_JIFFY_OFFSET: isize = (isize::MAX >> 1) - 1;
> +
>  /// The time unit of Linux kernel. One jiffy equals (1/HZ) second.
>  pub type Jiffies = crate::ffi::c_ulong;
>  
> @@ -569,6 +573,51 @@ pub fn as_millis_ceil(self) -> i64 {
>          }
>      }
>  
> +    /// Convert this span to a [`Delta<Jiffy>`] suitable for use as a timeout.
> +    ///
> +    /// Unless the result saturates, the value is rounded up to the next whole
> +    /// jiffy, so the resulting timeout is never shorter than `self` (as
> +    /// [`msecs_to_jiffies()`] does).
> +    ///
> +    /// The result saturates at zero jiffies for a negative span, i.e. an
> +    /// immediate timeout, and at the kernel's [`MAX_JIFFY_OFFSET`] for a span
> +    /// that is too large, which the C side treats as an infinite timeout.
> +    ///
> +    /// # Examples
> +    ///
> +    /// ```
> +    /// use kernel::time::Delta;
> +    ///
> +    /// // A negative span is an immediate timeout.
> +    /// assert_eq!(Delta::from_millis(-1).to_jiffies_timeout().as_jiffies(), 0);
> +    ///
> +    /// // A span shorter than a jiffy still waits, i.e. the timeout is never
> +    /// // shorter than the span.
> +    /// assert!(Delta::from_nanos(1).to_jiffies_timeout().as_jiffies() >= 1);
> +    /// ```
> +    ///
> +    /// [`msecs_to_jiffies()`]: srctree/include/linux/jiffies.h
> +    /// [`MAX_JIFFY_OFFSET`]: srctree/include/linux/jiffies.h
> +    #[inline]
> +    pub fn to_jiffies_timeout(self) -> Delta<Jiffy> {
> +        let msecs = self.as_millis_ceil();
> +
> +        // CAST: `msecs` is clamped to `0..=c_uint::MAX`, so it is non-negative and
> +        // fits in `c_uint`.
> +        let msecs = msecs.clamp(0, i64::from(crate::ffi::c_uint::MAX)) as crate::ffi::c_uint;
> +
> +        // SAFETY: `__msecs_to_jiffies()` is always safe to call.
> +        let jiffies = unsafe { bindings::__msecs_to_jiffies(msecs) };

As I mentioned in previous 2 versions, I don't think __msecs_to_jiffies should
be used for this. You're doing two rounding and saturation operations here.

If you do nsecs_to_jiffies64 and then clamp, you wouldn't run into any of these
boundary conditions.

Best,
Gary

> +
> +        // `__msecs_to_jiffies()` only saturates when its argument is negative as an
> +        // `int`: with `HZ=1000` it returns `msecs` as-is, which exceeds
> +        // `MAX_JIFFY_OFFSET` on 32 bit.
> +        let jiffies = jiffies.min(MAX_JIFFY_OFFSET as crate::ffi::c_ulong);
> +
> +        // CAST: `jiffies` is clamped to `MAX_JIFFY_OFFSET`, which is `<= isize::MAX`.
> +        Delta::<Jiffy>::from_jiffies(jiffies as isize)
> +    }
> +
>      /// Return `self % dividend` where `dividend` is in nanoseconds.
>      ///
>      /// The kernel doesn't have any emulation for `s64 % s64` on 32 bit platforms, so this is
> @@ -621,4 +670,21 @@ fn as_millis_ceil_extremes() {
>              MIN_MILLIS_CEIL
>          );
>      }
> +
> +    #[test]
> +    fn to_jiffies_timeout_saturates() {
> +        // `__msecs_to_jiffies()` does not clamp its result for every `HZ` configuration,
> +        // e.g. with `HZ=1000` it returns the millisecond value as-is, which exceeds
> +        // `MAX_JIFFY_OFFSET` on 32 bit.
> +        let max = Delta::from_millis(i64::from(i32::MAX)).to_jiffies_timeout();
> +        assert!(max.as_jiffies() <= MAX_JIFFY_OFFSET);
> +
> +        // An overlong span is an infinite timeout.
> +        let overlong = Delta::from_nanos(i64::MAX).to_jiffies_timeout();
> +        assert_eq!(overlong.as_jiffies(), MAX_JIFFY_OFFSET);
> +
> +        // A negative span is an immediate timeout, however long it is.
> +        let negative = Delta::from_nanos(i64::MIN).to_jiffies_timeout();
> +        assert_eq!(negative.as_jiffies(), 0);
> +    }
>  }