[PATCH v8 05/12] dt-bindings: power: rockchip: allow resets in a power domain node

[Jiaxing Hu <gahing@gahingwoo.com>]

Some domains do not come up in a usable state on their own and need
their resets cycled once power is on. The RK3576 NPU domains are one
case: without it the first access after power-on takes an async SError.

Signed-off-by: Jiaxing Hu <gahing@gahingwoo.com>
---
 .../bindings/power/rockchip,power-controller.yaml         | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
index b41db576f..83741f048 100644
--- a/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
+++ b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
@@ -136,6 +136,13 @@ $defs:
           A number of phandles to clocks that need to be enabled
           while power domain switches state.
 
+      resets:
+        maxItems: 1
+        description:
+          A phandle to a reset that needs to be cycled once the power domain has
+          been switched on, for domains whose logic does not come up in a usable
+          state by itself.
+
       domain-supply:
         description: domain regulator supply.
 
@@ -216,6 +223,7 @@ examples:
                     reg = <RK3399_PD_IEP>;
                     clocks = <&cru ACLK_IEP>,
                              <&cru HCLK_IEP>;
+                    resets = <&cru SRST_A_IEP>;
                     pm_qos = <&qos_iep>;
                     #power-domain-cells = <0>;
                 };
-- 
2.43.0


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip