From: "Denis V. Lunev" <den@openvz.org>
To: qemu-devel@nongnu.org
Cc: qemu-block@nongnu.org, "Denis V. Lunev" <den@openvz.org>,
"John Snow" <jsnow@redhat.com>,
"Peter Maydell" <peter.maydell@linaro.org>,
"Philippe Mathieu-Daudé" <philmd@oss.qualcomm.com>
Subject: [PATCH v2 16/17] tests/qtest/ide-test: cover the CHS translation across resets
Date: Thu, 20 Aug 2026 12:08:43 +0200 [thread overview]
Message-ID: <20260820100844.411717-17-den@openvz.org> (raw)
In-Reply-To: <20260820100844.411717-1-den@openvz.org>
From: Denis V. Lunev <den@openvz.org>
A translation the guest selected has to survive a software reset and not a
hardware one, and the two arrive at the same ide_reset(), so a fix for
either direction can break the other. Select a translation, put the drive
through a software reset and then through a machine reset, and name the
sector each translation picks along the way.
The marker read says which translation the device is addressing the disk
with, while IDENTIFY DEVICE words 55 and 56 say which one it reports. The
machine reset leaves the PCI command register cleared, so the device has
to be enabled again before the ports answer.
Cc: John Snow <jsnow@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Philippe Mathieu-Daudé <philmd@oss.qualcomm.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
---
tests/qtest/ide-test.c | 46 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/tests/qtest/ide-test.c b/tests/qtest/ide-test.c
index e7a56e0710..f14a0851f0 100644
--- a/tests/qtest/ide-test.c
+++ b/tests/qtest/ide-test.c
@@ -1639,6 +1639,51 @@ static void test_specify_identify_default(void)
ide_test_quit(qts);
}
+/* A hardware reset reverts the translation (ATA-5 9.1), SRST does not (9.2) */
+static void test_specify_reset(void)
+{
+ QTestState *qts;
+ QPCIDevice *dev;
+ QPCIBar bmdma_bar, ide_bar, ide_bar2;
+ uint16_t buf[256];
+ char marker[9];
+
+ qts = ide_test_start(
+ "-blockdev driver=file,node-name=hda,filename=%s "
+ "-device ide-hd,drive=hda,bus=ide.0,unit=0 ",
+ tmp_path[0]);
+ dev = get_pci_device(qts, &bmdma_bar, &ide_bar);
+ ide_bar2 = qpci_legacy_iomap(dev, IDE_BASE2);
+
+ ide_prepare_markers(qts, dev, ide_bar);
+ ide_set_translation(dev, ide_bar, 8, 32);
+ ide_read_chs_marker(qts, dev, ide_bar, 0, 1, 1, marker);
+ g_assert_cmpstr(marker, ==, CHS_MARKER_CUSTOM);
+
+ qpci_io_writeb(dev, ide_bar2, 0, IDE_CTRL_RESET);
+ qpci_io_writeb(dev, ide_bar2, 0, 0);
+ ide_wait_clear(qts, BSY);
+
+ ide_identify_words(dev, ide_bar, buf);
+ g_assert_cmpint(buf[55], ==, 8);
+ g_assert_cmpint(buf[56], ==, 32);
+ ide_read_chs_marker(qts, dev, ide_bar, 0, 1, 1, marker);
+ g_assert_cmpstr(marker, ==, CHS_MARKER_CUSTOM);
+
+ qtest_qmp_assert_success(qts, "{ 'execute': 'system_reset' }");
+ qtest_qmp_eventwait(qts, "RESET");
+ qpci_device_enable(dev);
+
+ ide_identify_words(dev, ide_bar, buf);
+ g_assert_cmpint(buf[55], ==, 16);
+ g_assert_cmpint(buf[56], ==, 63);
+ ide_read_chs_marker(qts, dev, ide_bar, 0, 1, 1, marker);
+ g_assert_cmpstr(marker, ==, CHS_MARKER_DEFAULT);
+
+ free_pci_device(dev);
+ ide_test_quit(qts);
+}
+
static void test_cdrom_pio(void)
{
cdrom_read_impl(1, CDROM_PIO);
@@ -1714,6 +1759,7 @@ int main(int argc, char **argv)
qtest_add_func("/ide/specify/identify", test_specify_identify);
qtest_add_func("/ide/specify/identify_default",
test_specify_identify_default);
+ qtest_add_func("/ide/specify/reset", test_specify_reset);
qtest_add_func("/ide/migration/chs_translation",
test_migrate_chs_translation);
qtest_add_func("/ide/migration/chs_snapshot", test_migrate_chs_snapshot);
--
2.53.0
next prev parent reply other threads:[~2026-08-20 10:10 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-20 10:08 [PATCH v2 00/17] hw/ide: fix the logical CHS translation a guest selects Denis V. Lunev
2026-08-20 10:08 ` [PATCH v2 01/17] hw/ide: reject an unsupported CHS translation Denis V. Lunev
2026-08-20 10:08 ` [PATCH v2 02/17] tests/qtest/ide-test: cover a CHS translation with zero sectors Denis V. Lunev
2026-08-20 10:08 ` [PATCH v2 03/17] tests/qtest/libqos/ahci: allow a count and an expected error Denis V. Lunev
2026-08-20 10:08 ` [PATCH v2 04/17] tests/qtest/ahci: cover the sector count of INITIALIZE DEVICE PARAMETERS Denis V. Lunev
2026-08-20 10:08 ` [PATCH v2 05/17] hw/ide: report the default CHS translation in IDENTIFY DEVICE Denis V. Lunev
2026-08-20 10:08 ` [PATCH v2 06/17] hw/ide: name the retired IDENTIFY DEVICE words the device fills in Denis V. Lunev
2026-08-20 10:08 ` [PATCH v2 07/17] hw/ide: factor out the IDENTIFY DEVICE current geometry words Denis V. Lunev
2026-08-20 11:07 ` Philippe Mathieu-Daudé
2026-08-20 10:08 ` [PATCH v2 08/17] hw/ide: keep the IDENTIFY DEVICE current geometry in sync Denis V. Lunev
2026-08-20 10:08 ` [PATCH v2 09/17] hw/ide: restore the power-on device state before loading Denis V. Lunev
2026-08-20 10:08 ` [PATCH v2 10/17] hw/ide: migrate the logical CHS translation Denis V. Lunev
2026-08-20 10:08 ` [PATCH v2 11/17] hw/ide: migrate the power-on defaults revert flag Denis V. Lunev
2026-08-20 10:08 ` [PATCH v2 12/17] tests/qtest/ide-test: cover the CHS translation across migration Denis V. Lunev
2026-08-20 10:08 ` [PATCH v2 13/17] tests/qtest/ide-test: cover a rejected CHS translation in the stream Denis V. Lunev
2026-08-20 10:08 ` [PATCH v2 14/17] tests/qtest/ide-test: cover the IDENTIFY DEVICE geometry words Denis V. Lunev
2026-08-20 10:08 ` [PATCH v2 15/17] hw/ide: revert the CHS translation on a hardware reset Denis V. Lunev
2026-08-20 10:08 ` Denis V. Lunev [this message]
2026-08-20 10:08 ` [PATCH v2 17/17] hw/ide: drop a redundant interrupt from INITIALIZE DEVICE PARAMETERS Denis V. Lunev
2026-08-20 11:08 ` Philippe Mathieu-Daudé
2026-08-20 13:09 ` [PATCH v2 00/17] hw/ide: fix the logical CHS translation a guest selects Denis V. Lunev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260820100844.411717-17-den@openvz.org \
--to=den@openvz.org \
--cc=jsnow@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=philmd@oss.qualcomm.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.