All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: Louis Adamian <adamianlouis@gmail.com>
Cc: "David Lechner" <dlechner@baylibre.com>,
	"Nuno Sá" <nuno.sa@analog.com>,
	"Andy Shevchenko" <andy@kernel.org>,
	linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 5/5] iio: pressure: ms5637: Add per-variant compensation
Date: Fri, 21 Aug 2026 02:01:22 +0100	[thread overview]
Message-ID: <20260821020122.1c2cc7dc@jic23-huawei> (raw)
In-Reply-To: <20260820141224.23730-6-adamianlouis@gmail.com>

On Thu, 20 Aug 2026 10:12:20 -0400
Louis Adamian <adamianlouis@gmail.com> wrote:

> Previously, all sensors used the compensation for the MS5637-02BA. Add
> correct temperature compensation for MS5637-30BA, MS5803-01BA,
> MS5803-02BA, MS5803-05BA, MS5803-14BA, MS5803-30BA, MS5805, MS5837-02BA
> and MS5837-30BA.
> 
> The deprecated meas,ms5803, meas,ms5637 and meas,ms5837 compatibles
> resolve to the -02BA variants. This changes the values that meas,ms5803
> and meas,ms5837 report.
> 
> meas,ms5805 now uses its own constants, correcting its readings. MS8607
> gets its own constants struct. The values match the MS5637-02BA ones it
> previously shared, so its readings are unchanged.
> 
> Signed-off-by: Louis Adamian <adamianlouis@gmail.com>

For this one Sashiko raises a valid concern.  The ABI is changing for
those deprecated choices.  To avoid that will require a slightly 
annoying dance with extra copies of the data to keep the old name.

One other question below.

> ---
>  drivers/iio/pressure/ms5637.c | 376 ++++++++++++++++++++++++++++++++--
>  1 file changed, 360 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/iio/pressure/ms5637.c b/drivers/iio/pressure/ms5637.c
> index 359f3a8e79b2..81b87b79e011 100644
> --- a/drivers/iio/pressure/ms5637.c
> +++ b/drivers/iio/pressure/ms5637.c


> +/*
> + * MS5805-02BA01 compensation constants
> + * Datasheet: https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=MS5805-02BA01&DocType=Data%20Sheet&DocLang=English&DocFormat=pdf&PartCntxt=MS580502BA01-50
> + * Pages: 8-9
> + * Sections: Pressure and Temperature Calculation, Second Order Temperature Compensation
> + */
> +static const struct ms_tp_comp_consts ms5805_consts = {
> +	.press_scale = 1000,
> +	.high_t2_multiplier = 0,
> +	.high_t2_shift = 0,
> +	.high_off2_multiplier = 0,
> +	.high_off2_shift = 0,
> +	.low_t2_multiplier = 11,
> +	.low_t2_shift = 35,
> +	.low_off2_multiplier = 31,
> +	.low_off2_shift = 3,
> +	.low_sens2_multiplier = 63,
> +	.low_sens2_shift = 5,
> +	.vlow_off2_multiplier = 0,
> +	.vlow_sens2_multiplier = 0,
> +	.has_vhigh_temp = false,
> +	.off_t1_shift = 17,
> +	.off_shift = 6,
> +	.sens_t1_shift = 16,
> +	.sens_shift = 7,
> +	.press_sens_shift = 21,
> +	.press_shift = 15,
>  };
>  
>  static const struct ms_tp_data ms5805_data = {
>  	.name = "ms5805",
>  	.hw = &ms5637_hw_data,
> -	.comp_consts = &ms5637_02_consts,
> +	.comp_consts = &ms5805_consts,

Is this change actually a fix?

> +};


      reply	other threads:[~2026-08-21  1:01 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20260820141224.23730-1-adamianlouis@gmail.com>
2026-08-20 14:12 ` [PATCH v3 1/5] iio: pressure: ms5637: Add missing ms5803 I2C device ID Louis Adamian
2026-08-21  0:41   ` Jonathan Cameron
2026-08-20 14:12 ` [PATCH v3 2/5] iio: pressure: ms5637: Move device data struct to header Louis Adamian
2026-08-21  0:48   ` Jonathan Cameron
2026-08-20 14:12 ` [PATCH v3 3/5] dt-bindings: iio: pressure: Add MS5637 Louis Adamian
2026-08-20 14:21   ` sashiko-bot
2026-08-20 18:13   ` Conor Dooley
2026-08-20 14:12 ` [PATCH v3 4/5] iio: pressure: ms5637: Parameterise second order temperature compensation Louis Adamian
2026-08-20 14:12 ` [PATCH v3 5/5] iio: pressure: ms5637: Add per-variant compensation Louis Adamian
2026-08-21  1:01   ` Jonathan Cameron [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260821020122.1c2cc7dc@jic23-huawei \
    --to=jic23@kernel.org \
    --cc=adamianlouis@gmail.com \
    --cc=andy@kernel.org \
    --cc=dlechner@baylibre.com \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nuno.sa@analog.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.