From: Rosen Penev <rosenp@gmail.com>
To: linux-mtd@lists.infradead.org
Cc: Miquel Raynal <miquel.raynal@bootlin.com>,
Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>,
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH] mtd: rawnand: ndfc: use devm_platform_ioremap_resource
Date: Sat, 22 Aug 2026 15:41:50 -0700 [thread overview]
Message-ID: <20260822224150.198749-1-rosenp@gmail.com> (raw)
Replace the open-coded of_iomap()/iounmap() with the managed
devm_platform_ioremap_resource() helper. This fixes a mapping leak on
probe failure and on driver remove (the old code never called
iounmap()) and simplifies the error path by dropping the manual
cleanup in ndfc_probe().
There is no overlapping memory-region concern introduced by this
change: each supported board DT describes a single ndfc node with a
unique 0x2000 register region, and the EBC parent uses dcr-reg rather
than a MEM reg resource, so the newly added request_mem_region() cannot
conflict with an existing reservation. Distinct chip selects map to
distinct 64-bit physical addresses, so CS instances do not overlap.
Assisted-by: opencode:hy3-free
Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
drivers/mtd/nand/raw/ndfc.c | 19 +++++++------------
1 file changed, 7 insertions(+), 12 deletions(-)
diff --git a/drivers/mtd/nand/raw/ndfc.c b/drivers/mtd/nand/raw/ndfc.c
index a48274297d3b..6bb22de1f206 100644
--- a/drivers/mtd/nand/raw/ndfc.c
+++ b/drivers/mtd/nand/raw/ndfc.c
@@ -185,11 +185,16 @@ static int ndfc_chip_init(struct ndfc_controller *ndfc,
static int ndfc_probe(struct platform_device *ofdev)
{
struct ndfc_controller *ndfc;
+ void __iomem *ndfcbase;
const __be32 *reg;
u32 ccr;
u32 cs;
int err, len = 0;
+ ndfcbase = devm_platform_ioremap_resource(ofdev, 0);
+ if (IS_ERR(ndfcbase))
+ return PTR_ERR(ndfcbase);
+
/* Read the reg property to get the chip select */
reg = of_get_property(ofdev->dev.of_node, "reg", &len);
if (reg == NULL || len != 12) {
@@ -210,11 +215,7 @@ static int ndfc_probe(struct platform_device *ofdev)
ndfc->ofdev = ofdev;
dev_set_drvdata(&ofdev->dev, ndfc);
- ndfc->ndfcbase = of_iomap(ofdev->dev.of_node, 0);
- if (!ndfc->ndfcbase) {
- dev_err(&ofdev->dev, "failed to get memory\n");
- return -EIO;
- }
+ ndfc->ndfcbase = ndfcbase;
ccr = NDFC_CCR_BS(ndfc->chip_select);
@@ -232,13 +233,7 @@ static int ndfc_probe(struct platform_device *ofdev)
iowrite32be(be32_to_cpup(reg), ndfc->ndfcbase + offset);
}
- err = ndfc_chip_init(ndfc, ofdev->dev.of_node);
- if (err) {
- iounmap(ndfc->ndfcbase);
- return err;
- }
-
- return 0;
+ return ndfc_chip_init(ndfc, ofdev->dev.of_node);
}
static void ndfc_remove(struct platform_device *ofdev)
--
2.55.0
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
WARNING: multiple messages have this Message-ID (diff)
From: Rosen Penev <rosenp@gmail.com>
To: linux-mtd@lists.infradead.org
Cc: Miquel Raynal <miquel.raynal@bootlin.com>,
Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>,
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH] mtd: rawnand: ndfc: use devm_platform_ioremap_resource
Date: Sat, 22 Aug 2026 15:41:50 -0700 [thread overview]
Message-ID: <20260822224150.198749-1-rosenp@gmail.com> (raw)
Replace the open-coded of_iomap()/iounmap() with the managed
devm_platform_ioremap_resource() helper. This fixes a mapping leak on
probe failure and on driver remove (the old code never called
iounmap()) and simplifies the error path by dropping the manual
cleanup in ndfc_probe().
There is no overlapping memory-region concern introduced by this
change: each supported board DT describes a single ndfc node with a
unique 0x2000 register region, and the EBC parent uses dcr-reg rather
than a MEM reg resource, so the newly added request_mem_region() cannot
conflict with an existing reservation. Distinct chip selects map to
distinct 64-bit physical addresses, so CS instances do not overlap.
Assisted-by: opencode:hy3-free
Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
drivers/mtd/nand/raw/ndfc.c | 19 +++++++------------
1 file changed, 7 insertions(+), 12 deletions(-)
diff --git a/drivers/mtd/nand/raw/ndfc.c b/drivers/mtd/nand/raw/ndfc.c
index a48274297d3b..6bb22de1f206 100644
--- a/drivers/mtd/nand/raw/ndfc.c
+++ b/drivers/mtd/nand/raw/ndfc.c
@@ -185,11 +185,16 @@ static int ndfc_chip_init(struct ndfc_controller *ndfc,
static int ndfc_probe(struct platform_device *ofdev)
{
struct ndfc_controller *ndfc;
+ void __iomem *ndfcbase;
const __be32 *reg;
u32 ccr;
u32 cs;
int err, len = 0;
+ ndfcbase = devm_platform_ioremap_resource(ofdev, 0);
+ if (IS_ERR(ndfcbase))
+ return PTR_ERR(ndfcbase);
+
/* Read the reg property to get the chip select */
reg = of_get_property(ofdev->dev.of_node, "reg", &len);
if (reg == NULL || len != 12) {
@@ -210,11 +215,7 @@ static int ndfc_probe(struct platform_device *ofdev)
ndfc->ofdev = ofdev;
dev_set_drvdata(&ofdev->dev, ndfc);
- ndfc->ndfcbase = of_iomap(ofdev->dev.of_node, 0);
- if (!ndfc->ndfcbase) {
- dev_err(&ofdev->dev, "failed to get memory\n");
- return -EIO;
- }
+ ndfc->ndfcbase = ndfcbase;
ccr = NDFC_CCR_BS(ndfc->chip_select);
@@ -232,13 +233,7 @@ static int ndfc_probe(struct platform_device *ofdev)
iowrite32be(be32_to_cpup(reg), ndfc->ndfcbase + offset);
}
- err = ndfc_chip_init(ndfc, ofdev->dev.of_node);
- if (err) {
- iounmap(ndfc->ndfcbase);
- return err;
- }
-
- return 0;
+ return ndfc_chip_init(ndfc, ofdev->dev.of_node);
}
static void ndfc_remove(struct platform_device *ofdev)
--
2.55.0
next reply other threads:[~2026-08-22 22:42 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-22 22:41 Rosen Penev [this message]
2026-08-22 22:41 ` [PATCH] mtd: rawnand: ndfc: use devm_platform_ioremap_resource Rosen Penev
2026-08-23 8:48 ` Markus Elfring
2026-08-23 8:48 ` Markus Elfring
2026-08-24 19:12 ` kernel test robot
2026-08-24 19:12 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260822224150.198749-1-rosenp@gmail.com \
--to=rosenp@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.