From: Eric Farman <farman@linux.ibm.com>
To: qemu-devel@nongnu.org
Cc: qemu-s390x@nongnu.org, Matthew Rosato <mjrosato@linux.ibm.com>,
Cornelia Huck <cohuck@redhat.com>,
Zhuoying Cai <zycai@linux.ibm.com>,
Thomas Huth <thuth@redhat.com>, Farhan Ali <alifm@linux.ibm.com>,
Jared Rossi <jrossi@linux.ibm.com>,
Eric Farman <farman@linux.ibm.com>
Subject: [PULL 18/37] pc-bios/s390-ccw: Define memory for IPLB and convert IPLB to pointers
Date: Wed, 26 Aug 2026 08:51:53 -0400 [thread overview]
Message-ID: <20260826125213.1901252-19-farman@linux.ibm.com> (raw)
In-Reply-To: <20260826125213.1901252-1-farman@linux.ibm.com>
From: Zhuoying Cai <zycai@linux.ibm.com>
Define a memory space for both IPL Parameter Block (IPLB) and
IPL Information Report Block (IIRB) since IIRB is stored immediately
following IPLB.
Convert IPLB to pointer and it points to the start of the defined memory space.
IIRB points to the end of IPLB.
Signed-off-by: Zhuoying Cai <zycai@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Jared Rossi <jrossi@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20260730214624.2328883-17-zycai@linux.ibm.com
Signed-off-by: Eric Farman <farman@linux.ibm.com>
---
include/hw/s390x/ipl/qipl.h | 6 ++++++
pc-bios/s390-ccw/iplb.h | 5 +++--
pc-bios/s390-ccw/jump2ipl.c | 6 +++---
pc-bios/s390-ccw/main.c | 34 +++++++++++++++++++---------------
pc-bios/s390-ccw/netmain.c | 8 ++++----
5 files changed, 35 insertions(+), 24 deletions(-)
diff --git a/include/hw/s390x/ipl/qipl.h b/include/hw/s390x/ipl/qipl.h
index 571f831780..39017fbba8 100644
--- a/include/hw/s390x/ipl/qipl.h
+++ b/include/hw/s390x/ipl/qipl.h
@@ -210,4 +210,10 @@ struct IplInfoReportBlock {
};
typedef struct IplInfoReportBlock IplInfoReportBlock;
+struct IplBlocks {
+ IplParameterBlock iplb;
+ IplInfoReportBlock iirb;
+};
+typedef struct IplBlocks IplBlocks;
+
#endif
diff --git a/pc-bios/s390-ccw/iplb.h b/pc-bios/s390-ccw/iplb.h
index 926e8eed5d..c92a3d0f0c 100644
--- a/pc-bios/s390-ccw/iplb.h
+++ b/pc-bios/s390-ccw/iplb.h
@@ -20,8 +20,9 @@
#include <string.h>
extern QemuIplParameters qipl;
-extern IplParameterBlock iplb __attribute__((__aligned__(PAGE_SIZE)));
+extern IplParameterBlock *iplb;
extern bool have_iplb;
+extern IplBlocks ipl_blocks;
static inline bool manage_iplb(IplParameterBlock *iplb, bool store)
{
@@ -61,7 +62,7 @@ static inline bool load_next_iplb(void)
qipl.index++;
next_iplb = (IplParameterBlock *) qipl.next_iplb;
- memcpy(&iplb, next_iplb, sizeof(IplParameterBlock));
+ memcpy(iplb, next_iplb, sizeof(IplParameterBlock));
qipl.chain_len--;
qipl.next_iplb = qipl.next_iplb + sizeof(IplParameterBlock);
diff --git a/pc-bios/s390-ccw/jump2ipl.c b/pc-bios/s390-ccw/jump2ipl.c
index 86321d0f46..fa2ca5cbe1 100644
--- a/pc-bios/s390-ccw/jump2ipl.c
+++ b/pc-bios/s390-ccw/jump2ipl.c
@@ -43,11 +43,11 @@ int jump_to_IPL_code(uint64_t address)
* The IPLB for QEMU SCSI type devices must be rebuilt during re-ipl. The
* iplb.devno is set to the boot position of the target SCSI device.
*/
- if (iplb.pbt == S390_IPL_TYPE_QEMU_SCSI) {
- iplb.devno = qipl.index;
+ if (iplb->pbt == S390_IPL_TYPE_QEMU_SCSI) {
+ iplb->devno = qipl.index;
}
- if (have_iplb && !set_iplb(&iplb)) {
+ if (have_iplb && !set_iplb(iplb)) {
panic("Failed to set IPLB");
}
diff --git a/pc-bios/s390-ccw/main.c b/pc-bios/s390-ccw/main.c
index 8bc6e8eaa3..44888e0c5c 100644
--- a/pc-bios/s390-ccw/main.c
+++ b/pc-bios/s390-ccw/main.c
@@ -24,7 +24,9 @@
static SubChannelId blk_schid = { .one = 1 };
static char loadparm_str[LOADPARM_LEN + 1];
QemuIplParameters qipl;
-IplParameterBlock iplb __attribute__((__aligned__(PAGE_SIZE)));
+/* Ensure that IPLB and IIRB are page aligned and sequential in memory */
+IplBlocks ipl_blocks __attribute__((__aligned__(PAGE_SIZE)));
+IplParameterBlock *iplb;
bool have_iplb;
static uint16_t cutype;
LowCore *lowcore; /* Yes, this *is* a pointer to address 0 */
@@ -54,7 +56,7 @@ void write_iplb_location(void)
{
if (virtio_is_supported(virtio_get_device()) &&
virtio_get_device_type() != VIRTIO_ID_NET) {
- lowcore->ptr_iplb = ptr2u32(&iplb);
+ lowcore->ptr_iplb = ptr2u32(iplb);
}
}
@@ -216,14 +218,14 @@ static void boot_setup(void)
char lpmsg[] = "LOADPARM=[________]\n";
VDev *vdev = virtio_get_device();
- if (have_iplb && memcmp(iplb.loadparm, NO_LOADPARM, LOADPARM_LEN) != 0) {
- ebcdic_to_ascii((char *) iplb.loadparm, loadparm_str, LOADPARM_LEN);
+ if (have_iplb && memcmp(iplb->loadparm, NO_LOADPARM, LOADPARM_LEN) != 0) {
+ ebcdic_to_ascii((char *) iplb->loadparm, loadparm_str, LOADPARM_LEN);
} else {
sclp_get_loadparm_ascii(loadparm_str);
}
if (have_iplb) {
- vdev->ipl_type = iplb.pbt;
+ vdev->ipl_type = iplb->pbt;
menu_setup(vdev);
} else {
vdev->ipl_type = QEMU_DEFAULT_IPL;
@@ -247,21 +249,21 @@ static bool find_boot_device(void)
switch (vdev->ipl_type) {
case S390_IPL_TYPE_CCW:
vdev->scsi_device_selected = false;
- debug_print_int("device no. ", iplb.ccw.devno);
- blk_schid.ssid = iplb.ccw.ssid & 0x3;
+ debug_print_int("device no. ", iplb->ccw.devno);
+ blk_schid.ssid = iplb->ccw.ssid & 0x3;
debug_print_int("ssid ", blk_schid.ssid);
- found = find_subch(iplb.ccw.devno);
+ found = find_subch(iplb->ccw.devno);
break;
case S390_IPL_TYPE_QEMU_SCSI:
vdev->scsi_device_selected = true;
- vdev->selected_scsi_device.channel = iplb.scsi.channel;
- vdev->selected_scsi_device.target = iplb.scsi.target;
- vdev->selected_scsi_device.lun = iplb.scsi.lun;
- blk_schid.ssid = iplb.scsi.ssid & 0x3;
- found = find_subch(iplb.scsi.devno);
+ vdev->selected_scsi_device.channel = iplb->scsi.channel;
+ vdev->selected_scsi_device.target = iplb->scsi.target;
+ vdev->selected_scsi_device.lun = iplb->scsi.lun;
+ blk_schid.ssid = iplb->scsi.ssid & 0x3;
+ found = find_subch(iplb->scsi.devno);
break;
case S390_IPL_TYPE_PCI:
- found = find_fid(iplb.pci.fid);
+ found = find_fid(iplb->pci.fid);
break;
default:
puts("Unsupported IPLB");
@@ -380,10 +382,12 @@ static void probe_boot_device(void)
void main(void)
{
+ iplb = &ipl_blocks.iplb;
+
copy_qipl();
sclp_setup();
css_setup();
- have_iplb = store_iplb(&iplb);
+ have_iplb = store_iplb(iplb);
if (!have_iplb) {
boot_setup();
probe_boot_device();
diff --git a/pc-bios/s390-ccw/netmain.c b/pc-bios/s390-ccw/netmain.c
index 791854fce0..ccd1c30013 100644
--- a/pc-bios/s390-ccw/netmain.c
+++ b/pc-bios/s390-ccw/netmain.c
@@ -531,11 +531,11 @@ static bool virtio_setup(void)
*/
enable_mss_facility();
- if (have_iplb || store_iplb(&iplb)) {
- IPL_assert(iplb.pbt == S390_IPL_TYPE_CCW, "IPL_TYPE_CCW expected");
- dev_no = iplb.ccw.devno;
+ if (have_iplb || store_iplb(iplb)) {
+ IPL_assert(iplb->pbt == S390_IPL_TYPE_CCW, "IPL_TYPE_CCW expected");
+ dev_no = iplb->ccw.devno;
debug_print_int("device no. ", dev_no);
- net_schid.ssid = iplb.ccw.ssid & 0x3;
+ net_schid.ssid = iplb->ccw.ssid & 0x3;
debug_print_int("ssid ", net_schid.ssid);
found = find_net_dev(&schib, dev_no);
} else {
--
2.55.0
next prev parent reply other threads:[~2026-08-26 12:55 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-26 12:51 [PULL 00/37] s390x queue Eric Farman
2026-08-26 12:51 ` [PULL 01/37] s390x/sclp: pv: only copy the original SCCB buffer Eric Farman
2026-08-26 12:51 ` [PULL 02/37] s390x/css: Fix css stsch detection to go beyond 8192 devices Eric Farman
2026-08-26 12:51 ` [PULL 03/37] Add boot-certs to s390-ccw-virtio machine type option Eric Farman
2026-08-26 12:51 ` [PULL 04/37] crypto/x509-utils: Refactor with GNUTLS fallback Eric Farman
2026-08-26 12:51 ` [PULL 05/37] crypto/x509-utils: Add helper functions for certificate store Eric Farman
2026-08-26 12:51 ` [PULL 06/37] hw/s390x/ipl: Create " Eric Farman
2026-08-26 12:51 ` [PULL 07/37] s390x/diag: Introduce DIAG 320 for Certificate Store Facility Eric Farman
2026-08-26 12:51 ` [PULL 08/37] s390x/diag: Refactor address validation check from diag308_parm_check Eric Farman
2026-08-26 12:51 ` [PULL 09/37] s390x/diag: Implement DIAG 320 subcode 1 Eric Farman
2026-08-26 12:51 ` [PULL 10/37] crypto/x509-utils: Add helper functions for DIAG 320 subcode 2 Eric Farman
2026-08-26 12:51 ` [PULL 11/37] s390x/diag: Implement " Eric Farman
2026-08-26 12:51 ` [PULL 12/37] hw/s390x: Define finite size for single entry VCEntry Eric Farman
2026-08-26 12:51 ` [PULL 13/37] s390x/diag: Introduce DIAG 508 for secure IPL operations Eric Farman
2026-08-26 12:51 ` [PULL 14/37] crypto/x509-utils: Add helper functions for DIAG 508 subcode 1 Eric Farman
2026-08-26 12:51 ` [PULL 15/37] s390x/diag: Generalize s390_ipl_read/write to accept void * Eric Farman
2026-08-26 12:51 ` [PULL 16/37] s390x/diag: Implement DIAG 508 subcode 1 for signature verification Eric Farman
2026-08-26 12:51 ` [PULL 17/37] s390x/ipl: Introduce IPL Information Report Block (IIRB) Eric Farman
2026-08-26 12:51 ` Eric Farman [this message]
2026-08-26 12:51 ` [PULL 19/37] hw/s390x/ipl: Add IPIB flags to IPL Parameter Block Eric Farman
2026-08-26 12:51 ` [PULL 20/37] hw/s390x/ipl: Rework s390_ipl_map_iplb_chain for certificate storage Eric Farman
2026-08-26 12:51 ` [PULL 21/37] s390x: Guest support for Secure-IPL Facility Eric Farman
2026-08-26 12:51 ` [PULL 22/37] pc-bios/s390-ccw: Refactor zipl_run() Eric Farman
2026-08-26 12:51 ` [PULL 23/37] pc-bios/s390-ccw: Rework zipl_load_segment function Eric Farman
2026-08-26 12:51 ` [PULL 24/37] pc-bios/s390-ccw: Introduce ZiplBootMode enum for IPL mode selection Eric Farman
2026-08-26 12:52 ` [PULL 25/37] pc-bios/s390-ccw: Add signature verification for secure IPL in audit mode Eric Farman
2026-08-26 12:52 ` [PULL 26/37] pc-bios/s390-ccw: Add signed component address overlap checks Eric Farman
2026-08-26 12:52 ` [PULL 27/37] s390x: Guest support for Secure-IPL Code Loading Attributes Facility (SCLAF) Eric Farman
2026-08-26 12:52 ` [PULL 28/37] pc-bios/s390-ccw: Add additional security checks for secure boot Eric Farman
2026-08-26 12:52 ` [PULL 29/37] Add secure-boot to s390-ccw-virtio machine type option Eric Farman
2026-08-26 12:52 ` [PULL 30/37] hw/s390x/ipl: Set IPIB flags for secure IPL Eric Farman
2026-08-26 12:52 ` [PULL 31/37] pc-bios/s390-ccw: Handle true secure IPL mode Eric Farman
2026-08-26 12:52 ` [PULL 32/37] hw/s390x/ipl: Handle secure boot with multiple boot devices Eric Farman
2026-08-26 12:52 ` [PULL 33/37] tests/functional/s390x: Add secure IPL functional test Eric Farman
2026-08-26 12:52 ` [PULL 34/37] docs/specs: Add secure IPL documentation Eric Farman
2026-08-26 12:52 ` [PULL 35/37] docs/system/s390x: " Eric Farman
2026-08-26 12:52 ` [PULL 36/37] MAINTAINERS: Add secure IPL files to S390-ccw boot group Eric Farman
2026-08-26 12:52 ` [PULL 37/37] pc-bios/s390-ccw.img: update s390x bios Eric Farman
2026-08-27 4:18 ` [PULL 00/37] s390x queue Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260826125213.1901252-19-farman@linux.ibm.com \
--to=farman@linux.ibm.com \
--cc=alifm@linux.ibm.com \
--cc=cohuck@redhat.com \
--cc=jrossi@linux.ibm.com \
--cc=mjrosato@linux.ibm.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-s390x@nongnu.org \
--cc=thuth@redhat.com \
--cc=zycai@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.