From: Eric Farman <farman@linux.ibm.com>
To: qemu-devel@nongnu.org
Cc: qemu-s390x@nongnu.org, Matthew Rosato <mjrosato@linux.ibm.com>,
Cornelia Huck <cohuck@redhat.com>,
Zhuoying Cai <zycai@linux.ibm.com>,
Collin Walling <walling@linux.ibm.com>,
Farhan Ali <alifm@linux.ibm.com>, Thomas Huth <thuth@redhat.com>,
Eric Farman <farman@linux.ibm.com>
Subject: [PULL 07/37] s390x/diag: Introduce DIAG 320 for Certificate Store Facility
Date: Wed, 26 Aug 2026 08:51:42 -0400 [thread overview]
Message-ID: <20260826125213.1901252-8-farman@linux.ibm.com> (raw)
In-Reply-To: <20260826125213.1901252-1-farman@linux.ibm.com>
From: Zhuoying Cai <zycai@linux.ibm.com>
DIAGNOSE 320 is introduced to support Certificate Store (CS)
Facility, which includes operations such as query certificate
storage information and provide certificates in the certificate
store.
Currently, only subcode 0 is supported with this patch, which is
used to query the Installed Subcodes Mask (ISM).
This subcode is only supported when the CS facility is enabled.
Availability of CS facility is determined by byte 134 bit 5 of the
SCLP Read Info block. Byte 134's facilities cannot be represented
without the availability of the extended-length-SCCB, so add it as
a check for consistency.
Note: secure IPL is not available for Secure Execution (SE) guests,
as their images are already integrity protected, and an additional
protection of the kernel by secure IPL is not necessary.
This feature is available starting with the gen16 CPU model.
Signed-off-by: Zhuoying Cai <zycai@linux.ibm.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20260730214624.2328883-6-zycai@linux.ibm.com
Signed-off-by: Eric Farman <farman@linux.ibm.com>
---
docs/specs/s390x-secure-ipl.rst | 12 +++++++++
include/hw/s390x/ipl/diag320.h | 20 ++++++++++++++
target/s390x/cpu_features.c | 1 +
target/s390x/cpu_features_def.h.inc | 1 +
target/s390x/cpu_models.c | 2 ++
target/s390x/diag.c | 42 +++++++++++++++++++++++++++++
target/s390x/gen-features.c | 3 +++
target/s390x/kvm/kvm.c | 16 +++++++++++
target/s390x/s390x-internal.h | 2 ++
target/s390x/tcg/misc_helper.c | 7 +++++
10 files changed, 106 insertions(+)
create mode 100644 include/hw/s390x/ipl/diag320.h
diff --git a/docs/specs/s390x-secure-ipl.rst b/docs/specs/s390x-secure-ipl.rst
index 9222ad9c12..cc497ea09a 100644
--- a/docs/specs/s390x-secure-ipl.rst
+++ b/docs/specs/s390x-secure-ipl.rst
@@ -18,3 +18,15 @@ PEM Base64 data.
Note: A maximum of 64 certificates are allowed to be stored in the certificate
store.
+
+DIAGNOSE function code 'X'320' - Certificate Store Facility
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+DIAGNOSE 'X'320' is used to provide support for guest code to directly
+query the s390 certificate store. Guest code may be the s390-ccw BIOS or
+the guest kernel.
+
+Subcode 0 - query installed subcodes
+ Returns a 256-bit installed subcodes mask (ISM) stored in the installed
+ subcodes block (ISB). This mask indicates which subcodes are currently
+ installed and available for use.
diff --git a/include/hw/s390x/ipl/diag320.h b/include/hw/s390x/ipl/diag320.h
new file mode 100644
index 0000000000..aa04b699c6
--- /dev/null
+++ b/include/hw/s390x/ipl/diag320.h
@@ -0,0 +1,20 @@
+/*
+ * S/390 DIAGNOSE 320 definitions and structures
+ *
+ * Copyright 2025 IBM Corp.
+ * Author(s): Zhuoying Cai <zycai@linux.ibm.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#ifndef S390X_DIAG320_H
+#define S390X_DIAG320_H
+
+#define DIAG_320_SUBC_QUERY_ISM 0
+
+#define DIAG_320_RC_OK 0x0001
+#define DIAG_320_RC_NOT_SUPPORTED 0x0102
+
+#define DIAG_320_ISM_QUERY_SUBCODES 0x80000000
+
+#endif
diff --git a/target/s390x/cpu_features.c b/target/s390x/cpu_features.c
index 896914888a..c6cd411e04 100644
--- a/target/s390x/cpu_features.c
+++ b/target/s390x/cpu_features.c
@@ -147,6 +147,7 @@ void s390_fill_feat_block(const S390FeatBitmap features, S390FeatType type,
break;
case S390_FEAT_TYPE_SCLP_FAC134:
clear_be_bit(s390_feat_def(S390_FEAT_DIAG_318)->bit, data);
+ clear_be_bit(s390_feat_def(S390_FEAT_CERT_STORE)->bit, data);
break;
case S390_FEAT_TYPE_SCLP_FAC139:
clear_be_bit(s390_feat_def(S390_FEAT_SIE_ASTFLEIE2)->bit, data);
diff --git a/target/s390x/cpu_features_def.h.inc b/target/s390x/cpu_features_def.h.inc
index a822f0f2fe..ae96f2381f 100644
--- a/target/s390x/cpu_features_def.h.inc
+++ b/target/s390x/cpu_features_def.h.inc
@@ -138,6 +138,7 @@ DEF_FEAT(SIE_IBS, "ibs", SCLP_CONF_CHAR_EXT, 10, "SIE: Interlock-and-broadcast-s
/* Features exposed via SCLP SCCB Facilities byte 134 (bit numbers relative to byte-134) */
DEF_FEAT(DIAG_318, "diag318", SCLP_FAC134, 0, "Control program name and version codes")
+DEF_FEAT(CERT_STORE, "cstore", SCLP_FAC134, 5, "Certificate Store functions")
/* Features exposed via SCLP SCCB Facilities byte 139 (bit numbers relative to byte-139) */
DEF_FEAT(SIE_ASTFLEIE2, "astfleie2", SCLP_FAC139, 1, "SIE: ASTFLE interpretation execution facility 2")
diff --git a/target/s390x/cpu_models.c b/target/s390x/cpu_models.c
index f292af7ad0..5e2c8b2b82 100644
--- a/target/s390x/cpu_models.c
+++ b/target/s390x/cpu_models.c
@@ -248,6 +248,7 @@ bool s390_has_feat(S390Feat feat)
if (s390_is_pv()) {
switch (feat) {
case S390_FEAT_DIAG_318:
+ case S390_FEAT_CERT_STORE:
case S390_FEAT_HPMA2:
case S390_FEAT_SIE_F2:
case S390_FEAT_SIE_SKEY:
@@ -506,6 +507,7 @@ static void check_consistency(const S390CPUModel *model)
{ S390_FEAT_PTFF_STOUE, S390_FEAT_MULTIPLE_EPOCH },
{ S390_FEAT_AP_QUEUE_INTERRUPT_CONTROL, S390_FEAT_AP },
{ S390_FEAT_DIAG_318, S390_FEAT_EXTENDED_LENGTH_SCCB },
+ { S390_FEAT_CERT_STORE, S390_FEAT_EXTENDED_LENGTH_SCCB },
{ S390_FEAT_NNPA, S390_FEAT_VECTOR },
{ S390_FEAT_RDP, S390_FEAT_LOCAL_TLB_CLEARING },
{ S390_FEAT_UV_FEAT_AP, S390_FEAT_AP },
diff --git a/target/s390x/diag.c b/target/s390x/diag.c
index 46d191b87d..c0df0c4bfc 100644
--- a/target/s390x/diag.c
+++ b/target/s390x/diag.c
@@ -18,6 +18,7 @@
#include "hw/watchdog/wdt_diag288.h"
#include "system/cpus.h"
#include "hw/s390x/ipl.h"
+#include "hw/s390x/ipl/diag320.h"
#include "hw/s390x/s390-virtio-ccw.h"
#include "system/kvm.h"
#include "kvm/kvm_s390x.h"
@@ -199,3 +200,44 @@ out:
return false;
}
}
+
+void handle_diag_320(CPUS390XState *env, uint64_t r1, uint64_t r3, uintptr_t ra)
+{
+ S390CPU *cpu = env_archcpu(env);
+ uint64_t subcode = env->regs[r3];
+ uint64_t addr = env->regs[r1];
+ uint32_t ism_word0;
+
+ if (env->psw.mask & PSW_MASK_PSTATE) {
+ s390_program_interrupt(env, PGM_PRIVILEGED, ra);
+ return;
+ }
+
+ if (!s390_has_feat(S390_FEAT_CERT_STORE) ||
+ (subcode & ~0x000ffULL) ||
+ (r1 & 1)) {
+ s390_program_interrupt(env, PGM_SPECIFICATION, ra);
+ return;
+ }
+
+ switch (subcode) {
+ case DIAG_320_SUBC_QUERY_ISM:
+ /*
+ * The Installed Subcode Block (ISB) can be up 8 words in size,
+ * but the current set of subcodes can fit within a single word
+ * for now.
+ */
+ ism_word0 = cpu_to_be32(DIAG_320_ISM_QUERY_SUBCODES);
+
+ if (s390_cpu_virt_mem_write(cpu, addr, r1, &ism_word0, sizeof(ism_word0))) {
+ s390_cpu_virt_mem_handle_exc(cpu, ra);
+ return;
+ }
+
+ env->regs[r1 + 1] = DIAG_320_RC_OK;
+ break;
+ default:
+ env->regs[r1 + 1] = DIAG_320_RC_NOT_SUPPORTED;
+ break;
+ }
+}
diff --git a/target/s390x/gen-features.c b/target/s390x/gen-features.c
index a309dc2c09..e6a586bce7 100644
--- a/target/s390x/gen-features.c
+++ b/target/s390x/gen-features.c
@@ -721,6 +721,7 @@ static uint16_t full_GEN16_GA1[] = {
S390_FEAT_UV_FEAT_AP,
S390_FEAT_UV_FEAT_AP_INTR,
S390_FEAT_SIE_ASTFLEIE2,
+ S390_FEAT_CERT_STORE,
};
static uint16_t full_GEN17_GA1[] = {
@@ -920,6 +921,8 @@ static uint16_t qemu_MAX[] = {
S390_FEAT_KIMD_SHA_512,
S390_FEAT_KLMD_SHA_512,
S390_FEAT_PRNO_TRNG,
+ S390_FEAT_EXTENDED_LENGTH_SCCB,
+ S390_FEAT_CERT_STORE,
};
/****** END FEATURE DEFS ******/
diff --git a/target/s390x/kvm/kvm.c b/target/s390x/kvm/kvm.c
index 803b878b4f..70ef92f5ab 100644
--- a/target/s390x/kvm/kvm.c
+++ b/target/s390x/kvm/kvm.c
@@ -99,6 +99,7 @@
#define DIAG_TIMEREVENT 0x288
#define DIAG_IPL 0x308
#define DIAG_SET_CONTROL_PROGRAM_CODES 0x318
+#define DIAG_CERT_STORE 0x320
#define DIAG_KVM_HYPERCALL 0x500
#define DIAG_KVM_BREAKPOINT 0x501
@@ -1531,6 +1532,16 @@ static void handle_diag_318(S390CPU *cpu, struct kvm_run *run)
}
}
+static void kvm_handle_diag_320(S390CPU *cpu, struct kvm_run *run)
+{
+ uint64_t r1, r3;
+
+ r1 = (run->s390_sieic.ipa & 0x00f0) >> 4;
+ r3 = run->s390_sieic.ipa & 0x000f;
+
+ handle_diag_320(&cpu->env, r1, r3, RA_IGNORED);
+}
+
#define DIAG_KVM_CODE_MASK 0x000000000000ffff
static int handle_diag(S390CPU *cpu, struct kvm_run *run, uint32_t ipb)
@@ -1561,6 +1572,9 @@ static int handle_diag(S390CPU *cpu, struct kvm_run *run, uint32_t ipb)
case DIAG_KVM_BREAKPOINT:
r = handle_sw_breakpoint(cpu, run);
break;
+ case DIAG_CERT_STORE:
+ kvm_handle_diag_320(cpu, run);
+ break;
default:
trace_kvm_insn_diag(func_code);
kvm_s390_program_interrupt(cpu, PGM_SPECIFICATION);
@@ -2472,6 +2486,8 @@ bool kvm_s390_get_host_cpu_model(S390CPUModel *model, Error **errp)
set_bit(S390_FEAT_DIAG_318, model->features);
}
+ set_bit(S390_FEAT_CERT_STORE, model->features);
+
/* Test for Ultravisor features that influence secure guest behavior */
query_uv_feat_guest(model->features);
diff --git a/target/s390x/s390x-internal.h b/target/s390x/s390x-internal.h
index 35d1e34ef4..1945bdf40c 100644
--- a/target/s390x/s390x-internal.h
+++ b/target/s390x/s390x-internal.h
@@ -388,6 +388,8 @@ int handle_diag_288(CPUS390XState *env, uint64_t r1, uint64_t r3);
/* Return whether a CPU reset is pending */
bool handle_diag_308(CPUS390XState *env, uint64_t r1, uint64_t r3,
uintptr_t ra);
+void handle_diag_320(CPUS390XState *env, uint64_t r1, uint64_t r3,
+ uintptr_t ra);
/* translate.c */
diff --git a/target/s390x/tcg/misc_helper.c b/target/s390x/tcg/misc_helper.c
index 09a45e58a5..403388145e 100644
--- a/target/s390x/tcg/misc_helper.c
+++ b/target/s390x/tcg/misc_helper.c
@@ -147,6 +147,13 @@ void HELPER(diag)(CPUS390XState *env, uint32_t r1, uint32_t r3, uint32_t num)
/* time bomb (watchdog) */
r = handle_diag_288(env, r1, r3);
break;
+ case 0x320:
+ /* cert store */
+ bql_lock();
+ handle_diag_320(env, r1, r3, GETPC());
+ bql_unlock();
+ r = 0;
+ break;
default:
r = -1;
break;
--
2.55.0
next prev parent reply other threads:[~2026-08-26 12:53 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-26 12:51 [PULL 00/37] s390x queue Eric Farman
2026-08-26 12:51 ` [PULL 01/37] s390x/sclp: pv: only copy the original SCCB buffer Eric Farman
2026-08-26 12:51 ` [PULL 02/37] s390x/css: Fix css stsch detection to go beyond 8192 devices Eric Farman
2026-08-26 12:51 ` [PULL 03/37] Add boot-certs to s390-ccw-virtio machine type option Eric Farman
2026-08-26 12:51 ` [PULL 04/37] crypto/x509-utils: Refactor with GNUTLS fallback Eric Farman
2026-08-26 12:51 ` [PULL 05/37] crypto/x509-utils: Add helper functions for certificate store Eric Farman
2026-08-26 12:51 ` [PULL 06/37] hw/s390x/ipl: Create " Eric Farman
2026-08-26 12:51 ` Eric Farman [this message]
2026-08-26 12:51 ` [PULL 08/37] s390x/diag: Refactor address validation check from diag308_parm_check Eric Farman
2026-08-26 12:51 ` [PULL 09/37] s390x/diag: Implement DIAG 320 subcode 1 Eric Farman
2026-08-26 12:51 ` [PULL 10/37] crypto/x509-utils: Add helper functions for DIAG 320 subcode 2 Eric Farman
2026-08-26 12:51 ` [PULL 11/37] s390x/diag: Implement " Eric Farman
2026-08-26 12:51 ` [PULL 12/37] hw/s390x: Define finite size for single entry VCEntry Eric Farman
2026-08-26 12:51 ` [PULL 13/37] s390x/diag: Introduce DIAG 508 for secure IPL operations Eric Farman
2026-08-26 12:51 ` [PULL 14/37] crypto/x509-utils: Add helper functions for DIAG 508 subcode 1 Eric Farman
2026-08-26 12:51 ` [PULL 15/37] s390x/diag: Generalize s390_ipl_read/write to accept void * Eric Farman
2026-08-26 12:51 ` [PULL 16/37] s390x/diag: Implement DIAG 508 subcode 1 for signature verification Eric Farman
2026-08-26 12:51 ` [PULL 17/37] s390x/ipl: Introduce IPL Information Report Block (IIRB) Eric Farman
2026-08-26 12:51 ` [PULL 18/37] pc-bios/s390-ccw: Define memory for IPLB and convert IPLB to pointers Eric Farman
2026-08-26 12:51 ` [PULL 19/37] hw/s390x/ipl: Add IPIB flags to IPL Parameter Block Eric Farman
2026-08-26 12:51 ` [PULL 20/37] hw/s390x/ipl: Rework s390_ipl_map_iplb_chain for certificate storage Eric Farman
2026-08-26 12:51 ` [PULL 21/37] s390x: Guest support for Secure-IPL Facility Eric Farman
2026-08-26 12:51 ` [PULL 22/37] pc-bios/s390-ccw: Refactor zipl_run() Eric Farman
2026-08-26 12:51 ` [PULL 23/37] pc-bios/s390-ccw: Rework zipl_load_segment function Eric Farman
2026-08-26 12:51 ` [PULL 24/37] pc-bios/s390-ccw: Introduce ZiplBootMode enum for IPL mode selection Eric Farman
2026-08-26 12:52 ` [PULL 25/37] pc-bios/s390-ccw: Add signature verification for secure IPL in audit mode Eric Farman
2026-08-26 12:52 ` [PULL 26/37] pc-bios/s390-ccw: Add signed component address overlap checks Eric Farman
2026-08-26 12:52 ` [PULL 27/37] s390x: Guest support for Secure-IPL Code Loading Attributes Facility (SCLAF) Eric Farman
2026-08-26 12:52 ` [PULL 28/37] pc-bios/s390-ccw: Add additional security checks for secure boot Eric Farman
2026-08-26 12:52 ` [PULL 29/37] Add secure-boot to s390-ccw-virtio machine type option Eric Farman
2026-08-26 12:52 ` [PULL 30/37] hw/s390x/ipl: Set IPIB flags for secure IPL Eric Farman
2026-08-26 12:52 ` [PULL 31/37] pc-bios/s390-ccw: Handle true secure IPL mode Eric Farman
2026-08-26 12:52 ` [PULL 32/37] hw/s390x/ipl: Handle secure boot with multiple boot devices Eric Farman
2026-08-26 12:52 ` [PULL 33/37] tests/functional/s390x: Add secure IPL functional test Eric Farman
2026-08-26 12:52 ` [PULL 34/37] docs/specs: Add secure IPL documentation Eric Farman
2026-08-26 12:52 ` [PULL 35/37] docs/system/s390x: " Eric Farman
2026-08-26 12:52 ` [PULL 36/37] MAINTAINERS: Add secure IPL files to S390-ccw boot group Eric Farman
2026-08-26 12:52 ` [PULL 37/37] pc-bios/s390-ccw.img: update s390x bios Eric Farman
2026-08-27 4:18 ` [PULL 00/37] s390x queue Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260826125213.1901252-8-farman@linux.ibm.com \
--to=farman@linux.ibm.com \
--cc=alifm@linux.ibm.com \
--cc=cohuck@redhat.com \
--cc=mjrosato@linux.ibm.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-s390x@nongnu.org \
--cc=thuth@redhat.com \
--cc=walling@linux.ibm.com \
--cc=zycai@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.