From: Jerome Tollet <jerome.tollet@gmail.com>
To: Jean Delvare <jdelvare@suse.de>, Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org, Benoit Masson <yahoo@perenite.com>,
Jonathan Corbet <corbet@lwn.net>,
Shuah Khan <skhan@linuxfoundation.org>,
Randy Dunlap <rdunlap@infradead.org>,
linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
Jerome Tollet <jerome.tollet@gmail.com>
Subject: [PATCH v5 3/4] hwmon: it87: expose additional temperature limits
Date: Sat, 29 Aug 2026 19:05:44 +0200 [thread overview]
Message-ID: <20260829170545.33401-4-jerome.tollet@gmail.com> (raw)
In-Reply-To: <20260829170545.33401-1-jerome.tollet@gmail.com>
From: "benoit.masson" <yahoo@perenite.com>
Expose extra temp min/max/offset/type/alarm attributes when a chip
reports more than three temperature resources.
Signed-off-by: benoit.masson <yahoo@perenite.com>
Signed-off-by: Jerome Tollet <jerome.tollet@gmail.com>
---
drivers/hwmon/it87.c | 58 ++++++++++++++++++++++++++++++++++++++++----
1 file changed, 53 insertions(+), 5 deletions(-)
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index e077adbb3..e44ec65c7 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -1349,8 +1349,26 @@ static SENSOR_DEVICE_ATTR_2(temp3_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
static SENSOR_DEVICE_ATTR_2(temp3_offset, S_IRUGO | S_IWUSR, show_temp,
set_temp, 2, 3);
static SENSOR_DEVICE_ATTR_2(temp4_input, S_IRUGO, show_temp, NULL, 3, 0);
+static SENSOR_DEVICE_ATTR_2(temp4_min, 0644, show_temp, set_temp,
+ 3, 1);
+static SENSOR_DEVICE_ATTR_2(temp4_max, 0644, show_temp, set_temp,
+ 3, 2);
+static SENSOR_DEVICE_ATTR_2(temp4_offset, 0644, show_temp,
+ set_temp, 3, 3);
static SENSOR_DEVICE_ATTR_2(temp5_input, S_IRUGO, show_temp, NULL, 4, 0);
+static SENSOR_DEVICE_ATTR_2(temp5_min, 0644, show_temp, set_temp,
+ 4, 1);
+static SENSOR_DEVICE_ATTR_2(temp5_max, 0644, show_temp, set_temp,
+ 4, 2);
+static SENSOR_DEVICE_ATTR_2(temp5_offset, 0644, show_temp,
+ set_temp, 4, 3);
static SENSOR_DEVICE_ATTR_2(temp6_input, S_IRUGO, show_temp, NULL, 5, 0);
+static SENSOR_DEVICE_ATTR_2(temp6_min, 0644, show_temp, set_temp,
+ 5, 1);
+static SENSOR_DEVICE_ATTR_2(temp6_max, 0644, show_temp, set_temp,
+ 5, 2);
+static SENSOR_DEVICE_ATTR_2(temp6_offset, 0644, show_temp,
+ set_temp, 5, 3);
static int get_temp_type(struct it87_data *data, int index)
{
@@ -1476,6 +1494,12 @@ static SENSOR_DEVICE_ATTR(temp2_type, S_IRUGO | S_IWUSR, show_temp_type,
set_temp_type, 1);
static SENSOR_DEVICE_ATTR(temp3_type, S_IRUGO | S_IWUSR, show_temp_type,
set_temp_type, 2);
+static SENSOR_DEVICE_ATTR(temp4_type, 0644, show_temp_type,
+ set_temp_type, 3);
+static SENSOR_DEVICE_ATTR(temp5_type, 0644, show_temp_type,
+ set_temp_type, 4);
+static SENSOR_DEVICE_ATTR(temp6_type, 0644, show_temp_type,
+ set_temp_type, 5);
/* 6 Fans */
@@ -2308,6 +2332,9 @@ static SENSOR_DEVICE_ATTR(fan6_alarm, S_IRUGO, show_alarm, NULL, 7);
static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 16);
static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 17);
static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 18);
+static SENSOR_DEVICE_ATTR(temp4_alarm, 0444, show_alarm, NULL, 19);
+static SENSOR_DEVICE_ATTR(temp5_alarm, 0444, show_alarm, NULL, 20);
+static SENSOR_DEVICE_ATTR(temp6_alarm, 0444, show_alarm, NULL, 21);
static SENSOR_DEVICE_ATTR(intrusion0_alarm, S_IRUGO | S_IWUSR,
show_alarm, clear_intrusion, 4);
@@ -2368,6 +2395,9 @@ static SENSOR_DEVICE_ATTR(temp1_beep, S_IRUGO | S_IWUSR,
show_beep, set_beep, 2);
static SENSOR_DEVICE_ATTR(temp2_beep, S_IRUGO, show_beep, NULL, 2);
static SENSOR_DEVICE_ATTR(temp3_beep, S_IRUGO, show_beep, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp4_beep, 0444, show_beep, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp5_beep, 0444, show_beep, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp6_beep, 0444, show_beep, NULL, 2);
static ssize_t vrm_show(struct device *dev, struct device_attribute *attr,
char *buf)
@@ -2530,14 +2560,12 @@ static umode_t it87_temp_is_visible(struct kobject *kobj,
int i = index / 7; /* temperature index */
int a = index % 7; /* attribute index */
- if (index >= 21) {
- i = index - 21 + 3;
- a = 0;
- }
-
if (!(data->has_temp & BIT(i)))
return 0;
+ if (a && i >= data->num_temp_limit)
+ return 0;
+
if (a == 3) {
if (get_temp_type(data, i) == 0)
return 0;
@@ -2579,8 +2607,28 @@ static struct attribute *it87_attributes_temp[] = {
&sensor_dev_attr_temp3_beep.dev_attr.attr,
&sensor_dev_attr_temp4_input.dev_attr.attr, /* 21 */
+ &sensor_dev_attr_temp4_max.dev_attr.attr,
+ &sensor_dev_attr_temp4_min.dev_attr.attr,
+ &sensor_dev_attr_temp4_type.dev_attr.attr,
+ &sensor_dev_attr_temp4_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp4_offset.dev_attr.attr,
+ &sensor_dev_attr_temp4_beep.dev_attr.attr,
+
&sensor_dev_attr_temp5_input.dev_attr.attr,
+ &sensor_dev_attr_temp5_max.dev_attr.attr,
+ &sensor_dev_attr_temp5_min.dev_attr.attr,
+ &sensor_dev_attr_temp5_type.dev_attr.attr,
+ &sensor_dev_attr_temp5_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp5_offset.dev_attr.attr,
+ &sensor_dev_attr_temp5_beep.dev_attr.attr,
+
&sensor_dev_attr_temp6_input.dev_attr.attr,
+ &sensor_dev_attr_temp6_max.dev_attr.attr,
+ &sensor_dev_attr_temp6_min.dev_attr.attr,
+ &sensor_dev_attr_temp6_type.dev_attr.attr,
+ &sensor_dev_attr_temp6_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp6_offset.dev_attr.attr,
+ &sensor_dev_attr_temp6_beep.dev_attr.attr,
NULL
};
--
2.55.0
next prev parent reply other threads:[~2026-08-29 17:06 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-29 17:05 [PATCH v5 0/4] hwmon: it87: add IT8613E support Jerome Tollet
2026-08-29 17:05 ` [PATCH v5 1/4] hwmon: it87: describe per-chip temperature resources Jerome Tollet
2026-08-29 17:20 ` sashiko-bot
2026-08-29 17:05 ` [PATCH v5 2/4] hwmon: it87: prepare for extended PWM temp maps Jerome Tollet
2026-08-29 17:20 ` sashiko-bot
2026-08-29 17:05 ` Jerome Tollet [this message]
2026-08-29 17:17 ` [PATCH v5 3/4] hwmon: it87: expose additional temperature limits sashiko-bot
2026-08-29 17:05 ` [PATCH v5 4/4] hwmon: it87: add IT8613E support Jerome Tollet
2026-08-29 17:23 ` sashiko-bot
2026-08-29 21:00 ` [PATCH v6 0/3] " Jerome Tollet
2026-08-29 21:00 ` [PATCH v6 1/3] hwmon: it87: describe per-chip temperature resources Jerome Tollet
2026-08-29 21:17 ` sashiko-bot
2026-08-29 21:00 ` [PATCH v6 2/3] hwmon: it87: prepare for extended PWM temp maps Jerome Tollet
2026-08-29 21:14 ` sashiko-bot
2026-08-29 21:00 ` [PATCH v6 3/3] hwmon: it87: add IT8613E support Jerome Tollet
2026-08-29 21:15 ` sashiko-bot
2026-08-29 22:01 ` [PATCH v7 0/3] " Jerome Tollet
2026-08-29 22:01 ` [PATCH v7 1/3] hwmon: it87: describe per-chip PWM temperature maps Jerome Tollet
2026-08-29 22:08 ` sashiko-bot
2026-08-30 0:01 ` Guenter Roeck
2026-08-29 22:01 ` [PATCH v7 2/3] hwmon: it87: prepare for extended PWM temp maps Jerome Tollet
2026-08-29 22:14 ` sashiko-bot
2026-08-30 0:01 ` Guenter Roeck
2026-08-29 22:01 ` [PATCH v7 3/3] hwmon: it87: add IT8613E support Jerome Tollet
2026-08-29 22:11 ` sashiko-bot
2026-08-30 0:02 ` Guenter Roeck
2026-08-29 22:53 ` [PATCH v6 0/3] " Guenter Roeck
2026-08-30 5:19 ` Jerome Tollet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260829170545.33401-4-jerome.tollet@gmail.com \
--to=jerome.tollet@gmail.com \
--cc=corbet@lwn.net \
--cc=jdelvare@suse.de \
--cc=linux-doc@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=rdunlap@infradead.org \
--cc=skhan@linuxfoundation.org \
--cc=yahoo@perenite.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.