From: Jerome Tollet <jerome.tollet@gmail.com>
To: Jean Delvare <jdelvare@suse.com>, Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org, Benoit Masson <yahoo@perenite.com>,
Jerome Tollet <jerome.tollet@gmail.com>
Subject: [PATCH v6 1/3] hwmon: it87: describe per-chip temperature resources
Date: Sat, 29 Aug 2026 23:00:34 +0200 [thread overview]
Message-ID: <20260829210036.61136-2-jerome.tollet@gmail.com> (raw)
In-Reply-To: <20260829210036.61136-1-jerome.tollet@gmail.com>
From: "benoit.masson" <yahoo@perenite.com>
Add per-chip temp limit/offset/map counts and wire the driver
to use them.
This keeps existing chips on the previous defaults while allowing newer
chips to advertise larger resources.
Signed-off-by: benoit.masson <yahoo@perenite.com>
Signed-off-by: Jerome Tollet <jerome.tollet@gmail.com>
---
drivers/hwmon/it87.c | 152 ++++++++++++++++++++++++++++++++-----------
1 file changed, 114 insertions(+), 38 deletions(-)
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 87edb1b60..1af815b5d 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -247,7 +247,7 @@ static const u8 IT87_REG_FAN[] = { 0x0d, 0x0e, 0x0f, 0x80, 0x82, 0x4c };
static const u8 IT87_REG_FAN_MIN[] = { 0x10, 0x11, 0x12, 0x84, 0x86, 0x4e };
static const u8 IT87_REG_FANX[] = { 0x18, 0x19, 0x1a, 0x81, 0x83, 0x4d };
static const u8 IT87_REG_FANX_MIN[] = { 0x1b, 0x1c, 0x1d, 0x85, 0x87, 0x4f };
-static const u8 IT87_REG_TEMP_OFFSET[] = { 0x56, 0x57, 0x59 };
+static const u8 IT87_REG_TEMP_OFFSET[] = { 0x56, 0x57, 0x59, 0x5a, 0x90, 0x91 };
#define IT87_REG_FAN_MAIN_CTRL 0x13
#define IT87_REG_FAN_CTL 0x14
@@ -281,8 +281,6 @@ static const u8 IT87_REG_AUTO_BASE[] = { 0x60, 0x68, 0x70, 0x78, 0xa0, 0xa8 };
#define NUM_VIN ARRAY_SIZE(IT87_REG_VIN)
#define NUM_VIN_LIMIT 8
#define NUM_TEMP 6
-#define NUM_TEMP_OFFSET ARRAY_SIZE(IT87_REG_TEMP_OFFSET)
-#define NUM_TEMP_LIMIT 3
#define NUM_FAN ARRAY_SIZE(IT87_REG_FAN)
#define NUM_FAN_DIV 3
#define NUM_PWM ARRAY_SIZE(IT87_REG_PWM)
@@ -292,6 +290,9 @@ struct it87_devices {
const char *name;
const char * const model;
u32 features;
+ u8 num_temp_limit;
+ u8 num_temp_offset;
+ u8 num_temp_map;
u8 peci_mask;
u8 old_peci_mask;
u8 smbus_bitmap; /* SMBus enable bits in extra config register */
@@ -302,7 +303,6 @@ struct it87_devices {
#define FEAT_NEWER_AUTOPWM BIT(1)
#define FEAT_OLD_AUTOPWM BIT(2)
#define FEAT_16BIT_FANS BIT(3)
-#define FEAT_TEMP_OFFSET BIT(4)
#define FEAT_TEMP_PECI BIT(5)
#define FEAT_TEMP_OLD_PECI BIT(6)
#define FEAT_FAN16_CONFIG BIT(7) /* Need to enable 16-bit fans */
@@ -335,43 +335,61 @@ static const struct it87_devices it87_devices[] = {
.model = "IT87F",
.features = FEAT_OLD_AUTOPWM | FEAT_FANCTL_ONOFF,
/* may need to overwrite */
+ .num_temp_limit = 3,
+ .num_temp_offset = 0,
+ .num_temp_map = 3,
},
[it8712] = {
.name = "it8712",
.model = "IT8712F",
.features = FEAT_OLD_AUTOPWM | FEAT_VID | FEAT_FANCTL_ONOFF,
/* may need to overwrite */
+ .num_temp_limit = 3,
+ .num_temp_offset = 0,
+ .num_temp_map = 3,
},
[it8716] = {
.name = "it8716",
.model = "IT8716F",
- .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET | FEAT_VID
+ .features = FEAT_16BIT_FANS | FEAT_VID
| FEAT_FAN16_CONFIG | FEAT_FIVE_FANS | FEAT_PWM_FREQ2
| FEAT_FANCTL_ONOFF,
+ .num_temp_limit = 3,
+ .num_temp_offset = 3,
+ .num_temp_map = 3,
},
[it8718] = {
.name = "it8718",
.model = "IT8718F",
- .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET | FEAT_VID
+ .features = FEAT_16BIT_FANS | FEAT_VID
| FEAT_TEMP_OLD_PECI | FEAT_FAN16_CONFIG | FEAT_FIVE_FANS
| FEAT_PWM_FREQ2 | FEAT_FANCTL_ONOFF,
+ .num_temp_limit = 3,
+ .num_temp_offset = 3,
+ .num_temp_map = 3,
.old_peci_mask = 0x4,
},
[it8720] = {
.name = "it8720",
.model = "IT8720F",
- .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET | FEAT_VID
+ .features = FEAT_16BIT_FANS | FEAT_VID
| FEAT_TEMP_OLD_PECI | FEAT_FAN16_CONFIG | FEAT_FIVE_FANS
| FEAT_PWM_FREQ2 | FEAT_FANCTL_ONOFF,
+ .num_temp_limit = 3,
+ .num_temp_offset = 3,
+ .num_temp_map = 3,
.old_peci_mask = 0x4,
},
[it8721] = {
.name = "it8721",
.model = "IT8721F",
.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
- | FEAT_TEMP_OFFSET | FEAT_TEMP_OLD_PECI | FEAT_TEMP_PECI
+ | FEAT_TEMP_OLD_PECI | FEAT_TEMP_PECI
| FEAT_FAN16_CONFIG | FEAT_FIVE_FANS | FEAT_IN7_INTERNAL
| FEAT_PWM_FREQ2 | FEAT_FANCTL_ONOFF,
+ .num_temp_limit = 3,
+ .num_temp_offset = 3,
+ .num_temp_map = 3,
.peci_mask = 0x05,
.old_peci_mask = 0x02, /* Actually reports PCH */
},
@@ -379,18 +397,24 @@ static const struct it87_devices it87_devices[] = {
.name = "it8728",
.model = "IT8728F",
.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
- | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_FIVE_FANS
+ | FEAT_TEMP_PECI | FEAT_FIVE_FANS
| FEAT_IN7_INTERNAL | FEAT_PWM_FREQ2
| FEAT_FANCTL_ONOFF,
+ .num_temp_limit = 6,
+ .num_temp_offset = 3,
+ .num_temp_map = 3,
.peci_mask = 0x07,
},
[it8732] = {
.name = "it8732",
.model = "IT8732F",
.features = FEAT_NEWER_AUTOPWM | FEAT_16BIT_FANS
- | FEAT_TEMP_OFFSET | FEAT_TEMP_OLD_PECI | FEAT_TEMP_PECI
+ | FEAT_TEMP_OLD_PECI | FEAT_TEMP_PECI
| FEAT_10_9MV_ADC | FEAT_IN7_INTERNAL | FEAT_FOUR_FANS
| FEAT_FOUR_PWM | FEAT_FANCTL_ONOFF,
+ .num_temp_limit = 3,
+ .num_temp_offset = 3,
+ .num_temp_map = 3,
.peci_mask = 0x07,
.old_peci_mask = 0x02, /* Actually reports PCH */
},
@@ -398,73 +422,97 @@ static const struct it87_devices it87_devices[] = {
.name = "it8771",
.model = "IT8771E",
.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
- | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_IN7_INTERNAL
+ | FEAT_TEMP_PECI | FEAT_IN7_INTERNAL
| FEAT_PWM_FREQ2 | FEAT_FANCTL_ONOFF,
/* PECI: guesswork */
/* 12mV ADC (OHM) */
/* 16 bit fans (OHM) */
/* three fans, always 16 bit (guesswork) */
+ .num_temp_limit = 3,
+ .num_temp_offset = 3,
+ .num_temp_map = 3,
.peci_mask = 0x07,
},
[it8772] = {
.name = "it8772",
.model = "IT8772E",
.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
- | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_IN7_INTERNAL
+ | FEAT_TEMP_PECI | FEAT_IN7_INTERNAL
| FEAT_PWM_FREQ2 | FEAT_FANCTL_ONOFF,
/* PECI (coreboot) */
/* 12mV ADC (HWSensors4, OHM) */
/* 16 bit fans (HWSensors4, OHM) */
/* three fans, always 16 bit (datasheet) */
+ .num_temp_limit = 3,
+ .num_temp_offset = 3,
+ .num_temp_map = 3,
.peci_mask = 0x07,
},
[it8781] = {
.name = "it8781",
.model = "IT8781F",
- .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET
+ .features = FEAT_16BIT_FANS
| FEAT_TEMP_OLD_PECI | FEAT_FAN16_CONFIG | FEAT_PWM_FREQ2
| FEAT_FANCTL_ONOFF,
+ .num_temp_limit = 3,
+ .num_temp_offset = 3,
+ .num_temp_map = 3,
.old_peci_mask = 0x4,
},
[it8782] = {
.name = "it8782",
.model = "IT8782F",
- .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET
+ .features = FEAT_16BIT_FANS
| FEAT_TEMP_OLD_PECI | FEAT_FAN16_CONFIG | FEAT_PWM_FREQ2
| FEAT_FANCTL_ONOFF,
+ .num_temp_limit = 3,
+ .num_temp_offset = 3,
+ .num_temp_map = 3,
.old_peci_mask = 0x4,
},
[it8783] = {
.name = "it8783",
.model = "IT8783E/F",
- .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET
+ .features = FEAT_16BIT_FANS
| FEAT_TEMP_OLD_PECI | FEAT_FAN16_CONFIG | FEAT_PWM_FREQ2
| FEAT_FANCTL_ONOFF,
+ .num_temp_limit = 3,
+ .num_temp_offset = 3,
+ .num_temp_map = 3,
.old_peci_mask = 0x4,
},
[it8786] = {
.name = "it8786",
.model = "IT8786E",
.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
- | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_IN7_INTERNAL
+ | FEAT_TEMP_PECI | FEAT_IN7_INTERNAL
| FEAT_PWM_FREQ2 | FEAT_FANCTL_ONOFF,
+ .num_temp_limit = 3,
+ .num_temp_offset = 3,
+ .num_temp_map = 3,
.peci_mask = 0x07,
},
[it8790] = {
.name = "it8790",
.model = "IT8790E",
.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
- | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_IN7_INTERNAL
+ | FEAT_TEMP_PECI | FEAT_IN7_INTERNAL
| FEAT_PWM_FREQ2 | FEAT_FANCTL_ONOFF | FEAT_NOCONF,
+ .num_temp_limit = 3,
+ .num_temp_offset = 3,
+ .num_temp_map = 3,
.peci_mask = 0x07,
},
[it8792] = {
.name = "it8792",
.model = "IT8792E/IT8795E",
.features = FEAT_NEWER_AUTOPWM | FEAT_16BIT_FANS
- | FEAT_TEMP_OFFSET | FEAT_TEMP_OLD_PECI | FEAT_TEMP_PECI
+ | FEAT_TEMP_OLD_PECI | FEAT_TEMP_PECI
| FEAT_10_9MV_ADC | FEAT_IN7_INTERNAL | FEAT_FANCTL_ONOFF
| FEAT_NOCONF,
+ .num_temp_limit = 3,
+ .num_temp_offset = 3,
+ .num_temp_map = 3,
.peci_mask = 0x07,
.old_peci_mask = 0x02, /* Actually reports PCH */
},
@@ -472,54 +520,72 @@ static const struct it87_devices it87_devices[] = {
.name = "it8603",
.model = "IT8603E",
.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
- | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_IN7_INTERNAL
+ | FEAT_TEMP_PECI | FEAT_IN7_INTERNAL
| FEAT_AVCC3 | FEAT_PWM_FREQ2,
+ .num_temp_limit = 3,
+ .num_temp_offset = 3,
+ .num_temp_map = 3,
.peci_mask = 0x07,
},
[it8620] = {
.name = "it8620",
.model = "IT8620E",
.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
- | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_SIX_FANS
+ | FEAT_TEMP_PECI | FEAT_SIX_FANS
| FEAT_IN7_INTERNAL | FEAT_SIX_PWM | FEAT_PWM_FREQ2
| FEAT_SIX_TEMP | FEAT_VIN3_5V | FEAT_FANCTL_ONOFF,
+ .num_temp_limit = 3,
+ .num_temp_offset = 3,
+ .num_temp_map = 3,
.peci_mask = 0x07,
},
[it8622] = {
.name = "it8622",
.model = "IT8622E",
.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
- | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_FIVE_FANS
+ | FEAT_TEMP_PECI | FEAT_FIVE_FANS
| FEAT_FIVE_PWM | FEAT_IN7_INTERNAL | FEAT_PWM_FREQ2
| FEAT_AVCC3 | FEAT_VIN3_5V | FEAT_FOUR_TEMP,
- .peci_mask = 0x07,
+ .num_temp_limit = 3,
+ .num_temp_offset = 3,
+ .num_temp_map = 3,
+ .peci_mask = 0x0f,
.smbus_bitmap = BIT(1) | BIT(2),
},
[it8628] = {
.name = "it8628",
.model = "IT8628E",
.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
- | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_SIX_FANS
+ | FEAT_TEMP_PECI | FEAT_SIX_FANS
| FEAT_IN7_INTERNAL | FEAT_SIX_PWM | FEAT_PWM_FREQ2
| FEAT_SIX_TEMP | FEAT_VIN3_5V | FEAT_FANCTL_ONOFF,
+ .num_temp_limit = 6,
+ .num_temp_offset = 3,
+ .num_temp_map = 3,
.peci_mask = 0x07,
},
[it8689] = {
.name = "it8689",
.model = "IT8689E",
.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
- | FEAT_TEMP_OFFSET | FEAT_SIX_FANS | FEAT_IN7_INTERNAL
+ | FEAT_SIX_FANS | FEAT_IN7_INTERNAL
| FEAT_SIX_PWM | FEAT_PWM_FREQ2 | FEAT_SIX_TEMP | FEAT_AVCC3
| FEAT_FANCTL_ONOFF,
+ .num_temp_limit = 3,
+ .num_temp_offset = 3,
+ .num_temp_map = 3,
.smbus_bitmap = BIT(1) | BIT(2),
},
[it87952] = {
.name = "it87952",
.model = "IT87952E",
.features = FEAT_NEWER_AUTOPWM | FEAT_16BIT_FANS
- | FEAT_TEMP_OFFSET | FEAT_TEMP_OLD_PECI | FEAT_TEMP_PECI
+ | FEAT_TEMP_OLD_PECI | FEAT_TEMP_PECI
| FEAT_10_9MV_ADC | FEAT_IN7_INTERNAL | FEAT_FANCTL_ONOFF
| FEAT_NOCONF,
+ .num_temp_limit = 3,
+ .num_temp_offset = 3,
+ .num_temp_map = 3,
.peci_mask = 0x07,
.old_peci_mask = 0x02, /* Actually reports PCH */
},
@@ -530,7 +596,6 @@ static const struct it87_devices it87_devices[] = {
#define has_10_9mv_adc(data) ((data)->features & FEAT_10_9MV_ADC)
#define has_newer_autopwm(data) ((data)->features & FEAT_NEWER_AUTOPWM)
#define has_old_autopwm(data) ((data)->features & FEAT_OLD_AUTOPWM)
-#define has_temp_offset(data) ((data)->features & FEAT_TEMP_OFFSET)
#define has_temp_peci(data, nr) (((data)->features & FEAT_TEMP_PECI) && \
((data)->peci_mask & BIT(nr)))
#define has_temp_old_peci(data, nr) \
@@ -589,6 +654,9 @@ struct it87_data {
int sioaddr;
enum chips type;
u32 features;
+ u8 num_temp_limit;
+ u8 num_temp_offset;
+ u8 num_temp_map;
u8 peci_mask;
u8 old_peci_mask;
@@ -937,12 +1005,12 @@ static struct it87_data *it87_update_device(struct device *dev)
data->temp[i][0] =
it87_read_value(data, IT87_REG_TEMP(i));
- if (has_temp_offset(data) && i < NUM_TEMP_OFFSET)
+ if (i < data->num_temp_offset)
data->temp[i][3] =
it87_read_value(data,
IT87_REG_TEMP_OFFSET[i]);
- if (i >= NUM_TEMP_LIMIT)
+ if (i >= data->num_temp_limit)
continue;
data->temp[i][1] =
@@ -1693,16 +1761,18 @@ static ssize_t show_pwm_temp_map(struct device *dev,
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
struct it87_data *data = it87_update_device(dev);
int nr = sensor_attr->index;
+ u8 num_map;
int map;
if (IS_ERR(data))
return PTR_ERR(data);
+ num_map = data->num_temp_map;
map = data->pwm_temp_map[nr];
- if (map >= 3)
+ if (map >= num_map)
map = 0; /* Should never happen */
- if (nr >= 3) /* pwm channels 3..6 map to temp4..6 */
- map += 3;
+ if (nr >= num_map) /* pwm channels 3..6 map to temp4..6 */
+ map += num_map;
return sprintf(buf, "%d\n", (int)BIT(map));
}
@@ -1714,6 +1784,7 @@ static ssize_t set_pwm_temp_map(struct device *dev,
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
struct it87_data *data = dev_get_drvdata(dev);
int nr = sensor_attr->index;
+ u8 num_map = data->num_temp_map;
long val;
int err;
u8 reg;
@@ -1721,8 +1792,8 @@ static ssize_t set_pwm_temp_map(struct device *dev,
if (kstrtol(buf, 10, &val) < 0)
return -EINVAL;
- if (nr >= 3)
- val -= 3;
+ if (nr >= num_map)
+ val -= num_map;
switch (val) {
case BIT(0):
@@ -2376,7 +2447,7 @@ static umode_t it87_temp_is_visible(struct kobject *kobj,
return attr->mode;
}
- if (a == 5 && !has_temp_offset(data))
+ if (a == 5 && i >= data->num_temp_offset)
return 0;
if (a == 6 && !data->has_beep)
@@ -3268,7 +3339,7 @@ static void it87_check_limit_regs(struct it87_data *data)
if (reg == 0xff)
it87_write_value(data, IT87_REG_VIN_MIN(i), 0);
}
- for (i = 0; i < NUM_TEMP_LIMIT; i++) {
+ for (i = 0; i < data->num_temp_limit; i++) {
reg = it87_read_value(data, IT87_REG_TEMP_HIGH(i));
if (reg == 0xff)
it87_write_value(data, IT87_REG_TEMP_HIGH(i), 127);
@@ -3461,6 +3532,7 @@ static int it87_probe(struct platform_device *pdev)
struct resource *res;
struct device *dev = &pdev->dev;
struct it87_sio_data *sio_data = dev_get_platdata(dev);
+ const struct it87_devices *chip;
int enable_pwm_interface;
struct device *hwmon_dev;
int err;
@@ -3483,9 +3555,13 @@ static int it87_probe(struct platform_device *pdev)
data->type = sio_data->type;
data->smbus_bitmap = sio_data->smbus_bitmap;
data->ec_special_config = sio_data->ec_special_config;
- data->features = it87_devices[sio_data->type].features;
- data->peci_mask = it87_devices[sio_data->type].peci_mask;
- data->old_peci_mask = it87_devices[sio_data->type].old_peci_mask;
+ chip = &it87_devices[sio_data->type];
+ data->features = chip->features;
+ data->peci_mask = chip->peci_mask;
+ data->old_peci_mask = chip->old_peci_mask;
+ data->num_temp_limit = chip->num_temp_limit;
+ data->num_temp_offset = chip->num_temp_offset;
+ data->num_temp_map = chip->num_temp_map;
/*
* IT8705F Datasheet 0.4.1, 3h == Version G.
* IT8712F Datasheet 0.9.1, section 8.3.5 indicates 8h == Version J.
--
2.55.0
next prev parent reply other threads:[~2026-08-29 21:00 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-29 17:05 [PATCH v5 0/4] hwmon: it87: add IT8613E support Jerome Tollet
2026-08-29 17:05 ` [PATCH v5 1/4] hwmon: it87: describe per-chip temperature resources Jerome Tollet
2026-08-29 17:20 ` sashiko-bot
2026-08-29 17:05 ` [PATCH v5 2/4] hwmon: it87: prepare for extended PWM temp maps Jerome Tollet
2026-08-29 17:20 ` sashiko-bot
2026-08-29 17:05 ` [PATCH v5 3/4] hwmon: it87: expose additional temperature limits Jerome Tollet
2026-08-29 17:17 ` sashiko-bot
2026-08-29 17:05 ` [PATCH v5 4/4] hwmon: it87: add IT8613E support Jerome Tollet
2026-08-29 17:23 ` sashiko-bot
2026-08-29 21:00 ` [PATCH v6 0/3] " Jerome Tollet
2026-08-29 21:00 ` Jerome Tollet [this message]
2026-08-29 21:17 ` [PATCH v6 1/3] hwmon: it87: describe per-chip temperature resources sashiko-bot
2026-08-29 21:00 ` [PATCH v6 2/3] hwmon: it87: prepare for extended PWM temp maps Jerome Tollet
2026-08-29 21:14 ` sashiko-bot
2026-08-29 21:00 ` [PATCH v6 3/3] hwmon: it87: add IT8613E support Jerome Tollet
2026-08-29 21:15 ` sashiko-bot
2026-08-29 22:01 ` [PATCH v7 0/3] " Jerome Tollet
2026-08-29 22:01 ` [PATCH v7 1/3] hwmon: it87: describe per-chip PWM temperature maps Jerome Tollet
2026-08-29 22:08 ` sashiko-bot
2026-08-30 0:01 ` Guenter Roeck
2026-08-29 22:01 ` [PATCH v7 2/3] hwmon: it87: prepare for extended PWM temp maps Jerome Tollet
2026-08-29 22:14 ` sashiko-bot
2026-08-30 0:01 ` Guenter Roeck
2026-08-29 22:01 ` [PATCH v7 3/3] hwmon: it87: add IT8613E support Jerome Tollet
2026-08-29 22:11 ` sashiko-bot
2026-08-30 0:02 ` Guenter Roeck
2026-08-29 22:53 ` [PATCH v6 0/3] " Guenter Roeck
2026-08-30 5:19 ` Jerome Tollet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260829210036.61136-2-jerome.tollet@gmail.com \
--to=jerome.tollet@gmail.com \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=yahoo@perenite.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.