From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org
Cc: Niklas Neronin <niklas.neronin@linux.intel.com>,
Peter Chen <peter.chen@kernel.org>,
Peter Chen <peter.chen@kerne.org>,
Mathias Nyman <mathias.nyman@linux.intel.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Sasha Levin <sashal@kernel.org>
Subject: [PATCH 6.18.y 2/7] usb: xhci: add helper to read PORTSC register
Date: Mon, 31 Aug 2026 09:27:04 -0400 [thread overview]
Message-ID: <20260831132711.4043116-2-sashal@kernel.org> (raw)
In-Reply-To: <20260831132711.4043116-1-sashal@kernel.org>
From: Niklas Neronin <niklas.neronin@linux.intel.com>
[ Upstream commit 511afe80b82d2b21086e459906e6c97b4eaeed20 ]
Add a dedicated helper function to read the USB Port Status and Control
(PORTSC) register. This complements xhci_portsc_writel() and improves code
clarity by providing a clear counterpart for reading the register.
Suggested-by: Peter Chen <peter.chen@kernel.org>
Reviewed-by: Peter Chen <peter.chen@kerne.org>
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20251119142417.2820519-7-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 78203d5b54a4 ("usb: xhci: bail out of setup if the controller is inaccessible")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/host/xhci-debugfs.c | 4 +-
drivers/usb/host/xhci-hub.c | 68 ++++++++++++++++-----------------
drivers/usb/host/xhci-pci.c | 2 +-
drivers/usb/host/xhci-ring.c | 2 +-
drivers/usb/host/xhci-tegra.c | 12 +++---
drivers/usb/host/xhci.c | 14 +++++--
drivers/usb/host/xhci.h | 1 +
7 files changed, 55 insertions(+), 48 deletions(-)
diff --git a/drivers/usb/host/xhci-debugfs.c b/drivers/usb/host/xhci-debugfs.c
index df99fffc61205..d32ac8f84691c 100644
--- a/drivers/usb/host/xhci-debugfs.c
+++ b/drivers/usb/host/xhci-debugfs.c
@@ -329,7 +329,7 @@ static int xhci_portsc_show(struct seq_file *s, void *unused)
u32 portsc;
char str[XHCI_MSG_MAX];
- portsc = readl(port->addr);
+ portsc = xhci_portsc_readl(port);
seq_printf(s, "%s\n", xhci_decode_portsc(str, portsc));
return 0;
@@ -359,7 +359,7 @@ static ssize_t xhci_port_write(struct file *file, const char __user *ubuf,
return count;
spin_lock_irqsave(&xhci->lock, flags);
/* compliance mode can only be enabled on ports in RxDetect */
- portsc = readl(port->addr);
+ portsc = xhci_portsc_readl(port);
if ((portsc & PORT_PLS_MASK) != XDEV_RXDETECT) {
spin_unlock_irqrestore(&xhci->lock, flags);
return -EPERM;
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index d0300c0978039..2927b8a803278 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -299,7 +299,7 @@ static void xhci_usb2_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
*/
memset(port_removable, 0, sizeof(port_removable));
for (i = 0; i < ports; i++) {
- portsc = readl(rhub->ports[i]->addr);
+ portsc = xhci_portsc_readl(rhub->ports[i]);
/* If a device is removable, PORTSC reports a 0, same as in the
* hub descriptor DeviceRemovable bits.
*/
@@ -356,7 +356,7 @@ static void xhci_usb3_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
port_removable = 0;
/* bit 0 is reserved, bit 1 is for port 1, etc. */
for (i = 0; i < ports; i++) {
- portsc = readl(rhub->ports[i]->addr);
+ portsc = xhci_portsc_readl(rhub->ports[i]);
if (portsc & PORT_DEV_REMOVE)
port_removable |= 1 << (i + 1);
}
@@ -566,13 +566,13 @@ static void xhci_disable_port(struct xhci_hcd *xhci, struct xhci_port *port)
return;
}
- portsc = readl(port->addr);
+ portsc = xhci_portsc_readl(port);
portsc = xhci_port_state_to_neutral(portsc);
/* Write 1 to disable the port */
xhci_portsc_writel(port, portsc | PORT_PE);
- portsc = readl(port->addr);
+ portsc = xhci_portsc_readl(port);
xhci_dbg(xhci, "disable port %d-%d, portsc: 0x%x\n",
hcd->self.busnum, port->hcd_portnum + 1, portsc);
}
@@ -622,7 +622,7 @@ static void xhci_clear_port_change_bit(struct xhci_hcd *xhci, u16 wValue,
}
/* Change bits are all write 1 to clear */
xhci_portsc_writel(port, port_status | status);
- port_status = readl(port->addr);
+ port_status = xhci_portsc_readl(port);
xhci_dbg(xhci, "clear port%d %s change, portsc: 0x%x\n",
wIndex + 1, port_change_bit, port_status);
@@ -650,7 +650,7 @@ static void xhci_set_port_power(struct xhci_hcd *xhci, struct xhci_port *port,
u32 temp;
hcd = port->rhub->hcd;
- temp = readl(port->addr);
+ temp = xhci_portsc_readl(port);
xhci_dbg(xhci, "set port power %d-%d %s, portsc: 0x%x\n",
hcd->self.busnum, port->hcd_portnum + 1, on ? "ON" : "OFF", temp);
@@ -660,7 +660,7 @@ static void xhci_set_port_power(struct xhci_hcd *xhci, struct xhci_port *port,
if (on) {
/* Power on */
xhci_portsc_writel(port, temp | PORT_POWER);
- readl(port->addr);
+ xhci_portsc_readl(port);
} else {
/* Power off */
xhci_portsc_writel(port, temp & ~PORT_POWER);
@@ -801,7 +801,7 @@ void xhci_set_link_state(struct xhci_hcd *xhci, struct xhci_port *port,
u32 temp;
u32 portsc;
- portsc = readl(port->addr);
+ portsc = xhci_portsc_readl(port);
temp = xhci_port_state_to_neutral(portsc);
temp &= ~PORT_PLS_MASK;
temp |= PORT_LINK_STROBE | link_state;
@@ -817,7 +817,7 @@ static void xhci_set_remote_wake_mask(struct xhci_hcd *xhci,
{
u32 temp;
- temp = readl(port->addr);
+ temp = xhci_portsc_readl(port);
temp = xhci_port_state_to_neutral(temp);
if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_CONNECT)
@@ -844,7 +844,7 @@ void xhci_test_and_clear_bit(struct xhci_hcd *xhci, struct xhci_port *port,
{
u32 temp;
- temp = readl(port->addr);
+ temp = xhci_portsc_readl(port);
if (temp & port_bit) {
temp = xhci_port_state_to_neutral(temp);
temp |= port_bit;
@@ -1002,7 +1002,7 @@ static int xhci_handle_usb2_port_link_resume(struct xhci_port *port,
}
xhci_ring_device(xhci, port->slot_id);
} else {
- int port_status = readl(port->addr);
+ int port_status = xhci_portsc_readl(port);
xhci_warn(xhci, "Port resume timed out, port %d-%d: 0x%x\n",
hcd->self.busnum, wIndex + 1, port_status);
@@ -1263,7 +1263,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
wIndex--;
port = ports[portnum1 - 1];
- temp = readl(port->addr);
+ temp = xhci_portsc_readl(port);
if (temp == ~(u32)0) {
xhci_hc_died(xhci);
retval = -ENODEV;
@@ -1309,7 +1309,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
port = ports[portnum1 - 1];
wIndex--;
- temp = readl(port->addr);
+ temp = xhci_portsc_readl(port);
if (temp == ~(u32)0) {
xhci_hc_died(xhci);
retval = -ENODEV;
@@ -1319,7 +1319,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
/* FIXME: What new port features do we need to support? */
switch (wValue) {
case USB_PORT_FEAT_SUSPEND:
- temp = readl(port->addr);
+ temp = xhci_portsc_readl(port);
if ((temp & PORT_PLS_MASK) != XDEV_U0) {
/* Resume the port to U0 first */
xhci_set_link_state(xhci, port, XDEV_U0);
@@ -1331,7 +1331,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
* a port unless the port reports that it is in the
* enabled (PED = ‘1’,PLS < ‘3’) state.
*/
- temp = readl(port->addr);
+ temp = xhci_portsc_readl(port);
if ((temp & PORT_PE) == 0 || (temp & PORT_RESET)
|| (temp & PORT_PLS_MASK) >= XDEV_U3) {
xhci_warn(xhci, "USB core suspending port %d-%d not in U0/U1/U2\n",
@@ -1354,11 +1354,11 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
msleep(10); /* wait device to enter */
spin_lock_irqsave(&xhci->lock, flags);
- temp = readl(port->addr);
+ temp = xhci_portsc_readl(port);
bus_state->suspended_ports |= 1 << wIndex;
break;
case USB_PORT_FEAT_LINK_STATE:
- temp = readl(port->addr);
+ temp = xhci_portsc_readl(port);
/* Disable port */
if (link_state == USB_SS_PORT_LS_SS_DISABLED) {
xhci_dbg(xhci, "Disable port %d-%d\n",
@@ -1372,7 +1372,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
PORT_OCC | PORT_RC | PORT_PLC |
PORT_CEC;
xhci_portsc_writel(port, temp | PORT_PE);
- temp = readl(port->addr);
+ temp = xhci_portsc_readl(port);
break;
}
@@ -1381,7 +1381,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
xhci_dbg(xhci, "Enable port %d-%d\n",
hcd->self.busnum, portnum1);
xhci_set_link_state(xhci, port, link_state);
- temp = readl(port->addr);
+ temp = xhci_portsc_readl(port);
break;
}
@@ -1414,7 +1414,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
hcd->self.busnum, portnum1);
xhci_set_link_state(xhci, port, link_state);
- temp = readl(port->addr);
+ temp = xhci_portsc_readl(port);
break;
}
/* Port must be enabled */
@@ -1462,7 +1462,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
xhci_dbg(xhci, "missing U0 port change event for port %d-%d\n",
hcd->self.busnum, portnum1);
spin_lock_irqsave(&xhci->lock, flags);
- temp = readl(port->addr);
+ temp = xhci_portsc_readl(port);
break;
}
@@ -1480,12 +1480,12 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
spin_unlock_irqrestore(&xhci->lock, flags);
while (retries--) {
usleep_range(4000, 8000);
- temp = readl(port->addr);
+ temp = xhci_portsc_readl(port);
if ((temp & PORT_PLS_MASK) == XDEV_U3)
break;
}
spin_lock_irqsave(&xhci->lock, flags);
- temp = readl(port->addr);
+ temp = xhci_portsc_readl(port);
bus_state->suspended_ports |= 1 << wIndex;
}
break;
@@ -1502,20 +1502,20 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
temp = (temp | PORT_RESET);
xhci_portsc_writel(port, temp);
- temp = readl(port->addr);
+ temp = xhci_portsc_readl(port);
xhci_dbg(xhci, "set port reset, actual port %d-%d status = 0x%x\n",
hcd->self.busnum, portnum1, temp);
break;
case USB_PORT_FEAT_REMOTE_WAKE_MASK:
xhci_set_remote_wake_mask(xhci, port, wake_mask);
- temp = readl(port->addr);
+ temp = xhci_portsc_readl(port);
xhci_dbg(xhci, "set port remote wake mask, actual port %d-%d status = 0x%x\n",
hcd->self.busnum, portnum1, temp);
break;
case USB_PORT_FEAT_BH_PORT_RESET:
temp |= PORT_WR;
xhci_portsc_writel(port, temp);
- temp = readl(port->addr);
+ temp = xhci_portsc_readl(port);
break;
case USB_PORT_FEAT_U1_TIMEOUT:
if (hcd->speed < HCD_USB3)
@@ -1547,7 +1547,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
goto error;
}
/* unblock any posted writes */
- temp = readl(port->addr);
+ temp = xhci_portsc_readl(port);
break;
case ClearPortFeature:
if (!portnum1 || portnum1 > max_ports)
@@ -1556,7 +1556,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
port = ports[portnum1 - 1];
wIndex--;
- temp = readl(port->addr);
+ temp = xhci_portsc_readl(port);
if (temp == ~(u32)0) {
xhci_hc_died(xhci);
retval = -ENODEV;
@@ -1566,7 +1566,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
temp = xhci_port_state_to_neutral(temp);
switch (wValue) {
case USB_PORT_FEAT_SUSPEND:
- temp = readl(port->addr);
+ temp = xhci_portsc_readl(port);
xhci_dbg(xhci, "clear USB_PORT_FEAT_SUSPEND\n");
xhci_dbg(xhci, "PORTSC %04x\n", temp);
if (temp & PORT_RESET)
@@ -1681,7 +1681,7 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf)
/* For each port, did anything change? If so, set that bit in buf. */
for (i = 0; i < max_ports; i++) {
- temp = readl(ports[i]->addr);
+ temp = xhci_portsc_readl(ports[i]);
if (temp == ~(u32)0) {
xhci_hc_died(xhci);
retval = -ENODEV;
@@ -1750,7 +1750,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
u32 t1, t2;
int retries = 10;
retry:
- t1 = readl(ports[port_index]->addr);
+ t1 = xhci_portsc_readl(ports[port_index]);
t2 = xhci_port_state_to_neutral(t1);
portsc_buf[port_index] = 0;
@@ -1849,7 +1849,7 @@ static bool xhci_port_missing_cas_quirk(struct xhci_port *port)
{
u32 portsc;
- portsc = readl(port->addr);
+ portsc = xhci_portsc_readl(port);
/* if any of these are set we are not stuck */
if (portsc & (PORT_CONNECT | PORT_CAS))
@@ -1864,7 +1864,7 @@ static bool xhci_port_missing_cas_quirk(struct xhci_port *port)
portsc |= PORT_WR;
xhci_portsc_writel(port, portsc);
/* flush write */
- readl(port->addr);
+ xhci_portsc_readl(port);
return true;
}
@@ -1911,7 +1911,7 @@ int xhci_bus_resume(struct usb_hcd *hcd)
}
port_index = max_ports;
while (port_index--) {
- portsc = readl(ports[port_index]->addr);
+ portsc = xhci_portsc_readl(ports[port_index]);
/* warm reset CAS limited ports stuck in polling/compliance */
if ((xhci->quirks & XHCI_MISSING_CAS) &&
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 095ca8ced86ff..828aeb4362567 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -899,7 +899,7 @@ static int xhci_pci_poweroff_late(struct usb_hcd *hcd, bool do_wakeup)
for (i = 0; i < HCS_MAX_PORTS(xhci->hcs_params1); i++) {
port = &xhci->hw_ports[i];
- portsc = readl(port->addr);
+ portsc = xhci_portsc_readl(port);
if ((portsc & PORT_PLS_MASK) != XDEV_U3)
continue;
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 2bb7569c95054..095725d497396 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2035,7 +2035,7 @@ static void handle_port_status(struct xhci_hcd *xhci, union xhci_trb *event)
hcd = port->rhub->hcd;
bus_state = &port->rhub->bus_state;
hcd_portnum = port->hcd_portnum;
- portsc = readl(port->addr);
+ portsc = xhci_portsc_readl(port);
xhci_dbg(xhci, "Port change event, %d-%d, id %d, portsc: 0x%x\n",
hcd->self.busnum, hcd_portnum + 1, port_id, portsc);
diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c
index b0dcdede1fc8e..4620c2e23b887 100644
--- a/drivers/usb/host/xhci-tegra.c
+++ b/drivers/usb/host/xhci-tegra.c
@@ -2025,7 +2025,7 @@ static bool xhci_hub_ports_suspended(struct xhci_hub *hub)
u32 value;
for (i = 0; i < hub->num_ports; i++) {
- value = readl(hub->ports[i]->addr);
+ value = xhci_portsc_readl(hub->ports[i]);
if ((value & PORT_PE) == 0)
continue;
@@ -2151,7 +2151,7 @@ static void tegra_xhci_enable_phy_sleepwalk_wake(struct tegra_xusb *tegra)
if (!is_host_mode_phy(tegra, i, j))
continue;
- portsc = readl(rhub->ports[index]->addr);
+ portsc = xhci_portsc_readl(rhub->ports[index]);
speed = tegra_xhci_portsc_to_speed(tegra, portsc);
tegra_xusb_padctl_enable_phy_sleepwalk(padctl, phy, speed);
tegra_xusb_padctl_enable_phy_wake(padctl, phy);
@@ -2246,7 +2246,7 @@ static int tegra_xusb_enter_elpg(struct tegra_xusb *tegra, bool is_auto_resume)
for (i = 0; i < xhci->usb2_rhub.num_ports; i++) {
if (!xhci->usb2_rhub.ports[i])
continue;
- portsc = readl(xhci->usb2_rhub.ports[i]->addr);
+ portsc = xhci_portsc_readl(xhci->usb2_rhub.ports[i]);
tegra->lp0_utmi_pad_mask &= ~BIT(i);
if (((portsc & PORT_PLS_MASK) == XDEV_U3) || ((portsc & DEV_SPEED_MASK) == XDEV_FS))
tegra->lp0_utmi_pad_mask |= BIT(i);
@@ -2784,7 +2784,7 @@ static int tegra_xhci_hub_control(struct usb_hcd *hcd, u16 type_req, u16 value,
while (i--) {
if (!test_bit(i, &bus_state->resuming_ports))
continue;
- portsc = readl(ports[i]->addr);
+ portsc = xhci_portsc_readl(ports[i]);
if ((portsc & PORT_PLS_MASK) == XDEV_RESUME)
tegra_phy_xusb_utmi_pad_power_on(
tegra_xusb_get_phy(tegra, "usb2", (int) i));
@@ -2802,7 +2802,7 @@ static int tegra_xhci_hub_control(struct usb_hcd *hcd, u16 type_req, u16 value,
if (!index || index > rhub->num_ports)
return -EPIPE;
ports = rhub->ports;
- portsc = readl(ports[port]->addr);
+ portsc = xhci_portsc_readl(ports[port]);
if (portsc & PORT_CONNECT)
tegra_phy_xusb_utmi_pad_power_on(phy);
}
@@ -2821,7 +2821,7 @@ static int tegra_xhci_hub_control(struct usb_hcd *hcd, u16 type_req, u16 value,
if ((type_req == ClearPortFeature) && (value == USB_PORT_FEAT_C_CONNECTION)) {
ports = rhub->ports;
- portsc = readl(ports[port]->addr);
+ portsc = xhci_portsc_readl(ports[port]);
if (!(portsc & PORT_CONNECT)) {
/* We don't suspend the PAD while HNP role swap happens on the OTG
* port
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index b35f77a6307fb..a4a9bac4ce095 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -48,6 +48,12 @@ void xhci_portsc_writel(struct xhci_port *port, u32 val)
}
EXPORT_SYMBOL_GPL(xhci_portsc_writel);
+u32 xhci_portsc_readl(struct xhci_port *port)
+{
+ return readl(port->addr);
+}
+EXPORT_SYMBOL_GPL(xhci_portsc_readl);
+
static bool td_on_ring(struct xhci_td *td, struct xhci_ring *ring)
{
struct xhci_segment *seg;
@@ -380,7 +386,7 @@ static void compliance_mode_recovery(struct timer_list *t)
return;
for (i = 0; i < rhub->num_ports; i++) {
- temp = readl(rhub->ports[i]->addr);
+ temp = xhci_portsc_readl(rhub->ports[i]);
if ((temp & PORT_PLS_MASK) == USB_SS_PORT_LS_COMP_MOD) {
/*
* Compliance Mode Detected. Letting USB Core
@@ -903,7 +909,7 @@ static void xhci_disable_hub_port_wake(struct xhci_hcd *xhci,
spin_lock_irqsave(&xhci->lock, flags);
for (i = 0; i < rhub->num_ports; i++) {
- portsc = readl(rhub->ports[i]->addr);
+ portsc = xhci_portsc_readl(rhub->ports[i]);
t1 = xhci_port_state_to_neutral(portsc);
t2 = t1;
@@ -943,7 +949,7 @@ static bool xhci_pending_portevent(struct xhci_hcd *xhci)
port_index = xhci->usb2_rhub.num_ports;
ports = xhci->usb2_rhub.ports;
while (port_index--) {
- portsc = readl(ports[port_index]->addr);
+ portsc = xhci_portsc_readl(ports[port_index]);
if (portsc & PORT_CHANGE_MASK ||
(portsc & PORT_PLS_MASK) == XDEV_RESUME)
return true;
@@ -951,7 +957,7 @@ static bool xhci_pending_portevent(struct xhci_hcd *xhci)
port_index = xhci->usb3_rhub.num_ports;
ports = xhci->usb3_rhub.ports;
while (port_index--) {
- portsc = readl(ports[port_index]->addr);
+ portsc = xhci_portsc_readl(ports[port_index]);
if (portsc & (PORT_CHANGE_MASK | PORT_CAS) ||
(portsc & PORT_PLS_MASK) == XDEV_RESUME)
return true;
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 68e00d4a5e012..14b99bf94f9db 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1963,6 +1963,7 @@ void xhci_add_interrupter(struct xhci_hcd *xhci, unsigned int intr_num);
int xhci_usb_endpoint_maxp(struct usb_device *udev,
struct usb_host_endpoint *host_ep);
void xhci_portsc_writel(struct xhci_port *port, u32 val);
+u32 xhci_portsc_readl(struct xhci_port *port);
/* xHCI roothub code */
void xhci_set_link_state(struct xhci_hcd *xhci, struct xhci_port *port,
--
2.53.0
next prev parent reply other threads:[~2026-08-31 13:27 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-31 12:21 FAILED: patch "[PATCH] usb: xhci: bail out of setup if the controller is" failed to apply to 6.18-stable tree gregkh
2026-08-31 13:27 ` [PATCH 6.18.y 1/7] usb: xhci: add tracing for PORTSC register writes Sasha Levin
2026-08-31 13:27 ` Sasha Levin [this message]
2026-08-31 13:27 ` [PATCH 6.18.y 3/7] usb: xhci: add USB Port Register Set struct Sasha Levin
2026-08-31 13:27 ` [PATCH 6.18.y 4/7] usb: xhci: implement " Sasha Levin
2026-08-31 13:27 ` [PATCH 6.18.y 5/7] usb: xhci: use cached HCSPARAMS1 value Sasha Levin
2026-08-31 13:27 ` [PATCH 6.18.y 6/7] usb: xhci: simplify handling of Structural Parameters 1 values Sasha Levin
2026-08-31 13:27 ` [PATCH 6.18.y 7/7] usb: xhci: bail out of setup if the controller is inaccessible Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260831132711.4043116-2-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=mathias.nyman@linux.intel.com \
--cc=niklas.neronin@linux.intel.com \
--cc=peter.chen@kerne.org \
--cc=peter.chen@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.