[PATCH 3/3] arm64: dts: qcom: Add Talos Lyra EVK board

[Avaneesh Kumar Dwivedi <avaneesh.dwivedi@oss.qualcomm.com>]

Add the device tree for the Talos Lyra EVK platform which combines
the Talos Lyra EVK SoM and Lyra carrier board.

This device tree adds board-specific peripheral configuration on top
of the SoM, including:

- Native DisplayPort output
- GPIO expanders on i2c5
- SPI-attached TPM (ST33)
- USB host and peripheral controllers
- Power and reset keys

Co-developed-by: Akash Kumar <akakum@qti.qualcomm.com>
Signed-off-by: Akash Kumar <akakum@qti.qualcomm.com>
Co-developed-by: Khalid Faisal Ansari <khalid.ansari@oss.qualcomm.com>
Signed-off-by: Khalid Faisal Ansari <khalid.ansari@oss.qualcomm.com>
Co-developed-by: Vishnu Santhosh <vishnu.santhosh@oss.qualcomm.com>
Signed-off-by: Vishnu Santhosh <vishnu.santhosh@oss.qualcomm.com>
Signed-off-by: Nirmesh Kumar Singh <nirmesh.singh@oss.qualcomm.com>
Signed-off-by: Avaneesh Kumar Dwivedi <avaneesh.dwivedi@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/Makefile           |   1 +
 arch/arm64/boot/dts/qcom/talos-lyra-evk.dts | 137 ++++++++++++++++++++++++++++
 2 files changed, 138 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 1c86e7e98f55..9818568912fd 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -409,6 +409,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sm8650-qrd.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8750-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8750-qrd.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= talos-evk.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= talos-lyra-evk.dtb
 
 talos-evk-el2-dtbs	:= talos-evk.dtb talos-el2.dtbo
 
diff --git a/arch/arm64/boot/dts/qcom/talos-lyra-evk.dts b/arch/arm64/boot/dts/qcom/talos-lyra-evk.dts
new file mode 100644
index 000000000000..7974e5bad24c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/talos-lyra-evk.dts
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+/dts-v1/;
+
+#include "talos-lyra-evk-som.dtsi"
+
+/ {
+	model = "Qualcomm QCS615 Talos Lyra EVK";
+	compatible = "qcom,talos-lyra-evk", "qcom,talos-lyra-evk-som", "qcom,qcs615",
+		     "qcom,sm6150";
+	chassis-type = "embedded";
+
+	dp0-connector {
+		compatible = "dp-connector";
+		label = "DP0";
+		type = "full-size";
+
+		hpd-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>;
+
+		port {
+			dp0_connector_in: endpoint {
+				remote-endpoint = <&mdss_dp0_out>;
+			};
+		};
+	};
+
+};
+
+&i2c5 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	expander0: gpio@20 {
+		compatible = "kinetic,kts1622", "ti,tcal6416";
+		reg = <0x20>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	expander1: gpio@21 {
+		compatible = "kinetic,kts1622", "ti,tcal6416";
+		reg = <0x21>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	expander2: gpio@38 {
+		compatible = "ti,tca9538";
+		reg = <0x38>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	expander3: gpio@3c {
+		compatible = "ti,tca9538";
+		reg = <0x3c>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000>;
+	remote-endpoint = <&dp0_connector_in>;
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+
+	status = "okay";
+};
+
+&spi6 {
+	status = "okay";
+
+	tpm@0 {
+		compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&usb_1 {
+	dr_mode = "peripheral";
+
+	status = "okay";
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l5a>;
+	vdda-pll-supply = <&vreg_l12a>;
+	vdda-phy-dpdm-supply = <&vreg_l13a>;
+
+	status = "okay";
+};
+
+&usb_2 {
+	dr_mode = "host";
+
+	status = "okay";
+};
+
+&usb_2_hsphy {
+	vdd-supply = <&vreg_l5a>;
+	vdda-pll-supply = <&vreg_l12a>;
+	vdda-phy-dpdm-supply = <&vreg_l13a>;
+
+	status = "okay";
+};
+
+&usb_qmpphy {
+	vdda-phy-supply = <&vreg_l5a>;
+	vdda-pll-supply = <&vreg_l12a>;
+
+	status = "okay";
+};
+
+&usb_qmpphy_2 {
+	vdda-phy-supply = <&vreg_l5a>;
+	vdda-pll-supply = <&vreg_l12a>;
+
+	status = "okay";
+};

-- 
2.34.1