All of lore.kernel.org
 help / color / mirror / Atom feed
From: Josua Mayer <josua@solid-run.com>
To: Geert Uytterhoeven <geert+renesas@glider.be>,
	 Magnus Damm <magnus.damm@gmail.com>,
	Rob Herring <robh@kernel.org>,
	 Krzysztof Kozlowski <krzk+dt@kernel.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	 Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	 Benjamin Bara <benjamin.bara@skidata.com>,
	 Linus Walleij <linusw@kernel.org>,
	 Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Cc: Jon Nettleton <jon@solid-run.com>,
	 Mikhail Anikin <mikhail.anikin@solid-run.com>,
	 Yazan Shhady <yazan.shhady@solid-run.com>,
	 linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
	 linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org,
	 linux-gpio@vger.kernel.org, Josua Mayer <josua@solid-run.com>
Subject: [PATCH v4 7/7] arm64: dts: renesas: rzg2l(c)/rzv2l hb-iiot: add dsi panel dt overlay
Date: Wed, 02 Sep 2026 13:50:15 +0200	[thread overview]
Message-ID: <20260902-rzg2-sr-boards-v4-7-4a456a422fee@solid-run.com> (raw)
In-Reply-To: <20260902-rzg2-sr-boards-v4-0-4a456a422fee@solid-run.com>

The SolidRun Hummingboard IIoT features a DSI connector supporting
touch-screen displays and is usable with RZ/G2L, RZ/G2LC and RZ/V2L
SoMs.

Provide addon for the Winstar WJ70N3TYJHMNG0 1024x600 dsi panel.

Add the addon in Makefile for all supported SoMs SoC targets.

Signed-off-by: Josua Mayer <josua@solid-run.com>
---
 arch/arm64/boot/dts/renesas/Makefile               |  8 +++
 ...hummingboard-iiot-panel-dsi-WJ70N3TYJHMNG0.dtso | 74 ++++++++++++++++++++++
 2 files changed, 82 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 69b1f75156016..0bc2bbff9370f 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -170,6 +170,8 @@ r9a07g044c2-hummingboard-iiot-emmc-dtbs := r9a07g044c2-hummingboard-iiot.dtb rzg
 dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044c2-hummingboard-iiot-emmc.dtb
 r9a07g044c2-hummingboard-iiot-microsd-dtbs := r9a07g044c2-hummingboard-iiot.dtb rzg2l-hummingboard-iiot-microsd.dtbo
 dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044c2-hummingboard-iiot-microsd.dtb
+r9a07g044c2-hummingboard-iiot-panel-dsi-WJ70N3TYJHMNG0-dtbs := r9a07g044c2-hummingboard-iiot.dtb rzg2l-hummingboard-iiot-panel-dsi-WJ70N3TYJHMNG0.dtbo
+dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044c2-hummingboard-iiot-panel-dsi-WJ70N3TYJHMNG0.dtb
 r9a07g044c2-hummingboard-iiot-rs485-a-dtbs := r9a07g044c2-hummingboard-iiot.dtb rzg2l-hummingboard-iiot-rs485-a.dtbo
 dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044c2-hummingboard-iiot-rs485-a.dtb
 r9a07g044c2-hummingboard-iiot-rs485-b-dtbs := r9a07g044c2-hummingboard-iiot.dtb rzg2l-hummingboard-iiot-rs485-b.dtbo
@@ -186,6 +188,9 @@ dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-hummingboard-iiot-emmc.dtb
 dtb-$(CONFIG_ARCH_R9A07G044) += rzg2l-hummingboard-iiot-microsd.dtbo
 r9a07g044l2-hummingboard-iiot-microsd-dtbs := r9a07g044l2-hummingboard-iiot.dtb rzg2l-hummingboard-iiot-microsd.dtbo
 dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-hummingboard-iiot-microsd.dtb
+dtb-$(CONFIG_ARCH_R9A07G044) += rzg2l-hummingboard-iiot-panel-dsi-WJ70N3TYJHMNG0.dtbo
+r9a07g044l2-hummingboard-iiot-panel-dsi-WJ70N3TYJHMNG0-dtbs := r9a07g044l2-hummingboard-iiot.dtb rzg2l-hummingboard-iiot-panel-dsi-WJ70N3TYJHMNG0.dtbo
+dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-hummingboard-iiot-panel-dsi-WJ70N3TYJHMNG0.dtb
 dtb-$(CONFIG_ARCH_R9A07G044) += rzg2l-hummingboard-iiot-rs485-a.dtbo
 r9a07g044l2-hummingboard-iiot-rs485-a-dtbs := r9a07g044l2-hummingboard-iiot.dtb rzg2l-hummingboard-iiot-rs485-a.dtbo
 dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-hummingboard-iiot-rs485-a.dtb
@@ -205,6 +210,9 @@ dtb-$(CONFIG_ARCH_R9A07G054) += r9a07g054l2-hummingboard-iiot-emmc.dtb
 dtb-$(CONFIG_ARCH_R9A07G054) += rzg2l-hummingboard-iiot-microsd.dtbo
 r9a07g054l2-hummingboard-iiot-microsd-dtbs := r9a07g054l2-hummingboard-iiot.dtb rzg2l-hummingboard-iiot-microsd.dtbo
 dtb-$(CONFIG_ARCH_R9A07G054) += r9a07g054l2-hummingboard-iiot-microsd.dtb
+dtb-$(CONFIG_ARCH_R9A07G054) += rzg2l-hummingboard-iiot-panel-dsi-WJ70N3TYJHMNG0.dtbo
+r9a07g054l2-hummingboard-iiot-panel-dsi-WJ70N3TYJHMNG0-dtbs := r9a07g054l2-hummingboard-iiot.dtb rzg2l-hummingboard-iiot-panel-dsi-WJ70N3TYJHMNG0.dtbo
+dtb-$(CONFIG_ARCH_R9A07G054) += r9a07g054l2-hummingboard-iiot-panel-dsi-WJ70N3TYJHMNG0.dtb
 dtb-$(CONFIG_ARCH_R9A07G054) += rzg2l-hummingboard-iiot-rs485-a.dtbo
 r9a07g054l2-hummingboard-iiot-rs485-a-dtbs := r9a07g054l2-hummingboard-iiot.dtb rzg2l-hummingboard-iiot-rs485-a.dtbo
 dtb-$(CONFIG_ARCH_R9A07G054) += r9a07g054l2-hummingboard-iiot-rs485-a.dtb
diff --git a/arch/arm64/boot/dts/renesas/rzg2l-hummingboard-iiot-panel-dsi-WJ70N3TYJHMNG0.dtso b/arch/arm64/boot/dts/renesas/rzg2l-hummingboard-iiot-panel-dsi-WJ70N3TYJHMNG0.dtso
new file mode 100644
index 0000000000000..e43a38d5330e6
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzg2l-hummingboard-iiot-panel-dsi-WJ70N3TYJHMNG0.dtso
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ *
+ * Overlay for enabling HummingBoard IIoT MIPI-DSI connector
+ * with Winstar WJ70N3TYJHMNG0 panel.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&{/} {
+	dsi_backlight: dsi-backlight {
+		compatible = "gpio-backlight";
+		gpios = <&tca6408_u48 3 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c_dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	touchscreen@41 {
+		compatible = "ilitek,ili2130";
+		reg = <0x41>;
+		/*
+		 * Touchscreen fires short active-low pulses which level trigger
+		 * on i2c gpio expander can miss. Trigger on falling edge instead.
+		 */
+		interrupts-extended = <&tca6416_u21 13 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&tca6408_u48 6 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel@0 {
+		/* This is a Winstar panel, but the ronbo panel uses same controls. */
+		compatible = "ronbo,rb070d30";
+		reg = <0>;
+		/* reset is active-low but driver inverts it internally */
+		reset-gpios = <&tca6408_u48 1 GPIO_ACTIVE_HIGH>;
+		backlight = <&dsi_backlight>;
+		power-gpios = <&tca6408_u48 2 GPIO_ACTIVE_HIGH>;
+		shlr-gpios = <&tca6408_u48 4 GPIO_ACTIVE_LOW>;
+		updn-gpios = <&tca6408_u48 5 GPIO_ACTIVE_HIGH>;
+		vcc-lcd-supply = <&reg_dsi_panel>;
+
+		port {
+			dsi_in_panel: endpoint {
+				remote-endpoint = <&mipi_dsi_out>;
+			};
+		};
+	};
+
+	ports {
+		port@1 {
+			mipi_dsi_out: endpoint {
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&dsi_in_panel>;
+			};
+		};
+	};
+};
+
+&du {
+	status = "okay";
+};

-- 
2.51.0


  parent reply	other threads:[~2026-09-02 11:50 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-02 11:50 [PATCH v4 0/7] arm64: dts: renesas: Add various SolidRun RZ/G2 based boards Josua Mayer
2026-09-02 11:50 ` [PATCH v4 1/7] dt-bindings: soc: " Josua Mayer
2026-09-02 11:50 ` [PATCH v4 2/7] dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Allow input-enable pinconf Josua Mayer
2026-09-02 12:58   ` Linus Walleij
2026-09-03  9:23     ` Josua Mayer
2026-09-04 10:12       ` Geert Uytterhoeven
2026-09-04 11:14         ` Josua Mayer
2026-09-04 11:16           ` Geert Uytterhoeven
2026-09-04 11:33             ` Josua Mayer
2026-09-02 11:50 ` [PATCH v4 3/7] dt-bindings: usb: cypress,hx3: make peer-hub property optional Josua Mayer
2026-09-02 11:50 ` [PATCH v4 4/7] arm64: dts: renesas: add support for solidrun rzg2l som and hb-iiot evb Josua Mayer
2026-09-02 11:50 ` [PATCH v4 5/7] arm64: dts: renesas: add support for solidrun rzv2l " Josua Mayer
2026-09-02 11:50 ` [PATCH v4 6/7] arm64: dts: renesas: add support for solidrun rzg2lc " Josua Mayer
2026-09-02 12:03   ` sashiko-bot
2026-09-02 11:50 ` Josua Mayer [this message]
2026-09-02 11:59   ` [PATCH v4 7/7] arm64: dts: renesas: rzg2l(c)/rzv2l hb-iiot: add dsi panel dt overlay sashiko-bot
2026-09-03 10:06   ` Josua Mayer
2026-09-02 12:03 ` [PATCH v4 0/7] arm64: dts: renesas: Add various SolidRun RZ/G2 based boards Geert Uytterhoeven

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260902-rzg2-sr-boards-v4-7-4a456a422fee@solid-run.com \
    --to=josua@solid-run.com \
    --cc=benjamin.bara@skidata.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=geert+renesas@glider.be \
    --cc=gregkh@linuxfoundation.org \
    --cc=jon@solid-run.com \
    --cc=krzk+dt@kernel.org \
    --cc=linusw@kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=mikhail.anikin@solid-run.com \
    --cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
    --cc=robh@kernel.org \
    --cc=yazan.shhady@solid-run.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.