All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v2] media: ipu-bridge: do not use the CVS device lookup for IVSC
@ 2026-09-02 14:54 Sergey Zagursky
  0 siblings, 0 replies; only message in thread
From: Sergey Zagursky @ 2026-09-02 14:54 UTC (permalink / raw)
  To: Sakari Ailus, Miguel Vadillo, Mehdi Djait, Mauro Carvalho Chehab
  Cc: linux-media, linux-kernel, regressions, Sergey Zagursky, stable

Since commit c6b1b34b5090 ("media: pci: intel: Add CVS support for IPU
bridge driver") the internal camera no longer works on laptops where the
sensor sits behind an IVSC, for example a Dell XPS 16 9640 (IPU6,
INTC10CF, ov02c10):

  intel-ipu6 0000:00:05.0: Found supported sensor OVTI02C1:00
  intel-ipu6 0000:00:05.0: Connected 1 cameras
  ivsc_csi intel_vsc-92335fcf-3203-4472-af93-7b4453ac29da: mei-csi probed
      without device fwnode!

No sensor subdevice is registered, the media graph has no sensor entity
and userspace finds no camera at all.

ipu_bridge_get_ivsc_csi_dev() first looks for the platform device named
"intel_vsc" and returns its mei-csi child. That device is created by
mei_vsc, which on this machine only appears once the LJCA USB bridge and
its SPI controller have probed, about a second after the IPU6 probe that
runs the bridge:

  07:59:29.297  platform INTC10CF:00 created (ACPI scan)
  07:59:41      intel-ipu6 probe -> ipu_bridge_init()
  07:59:42.391  platform intel_vsc created (mei_vsc)

The commit above added two fallbacks for CVS which match on the ACPI
companion alone. They are reached for every entry of ivsc_acpi_ids[],
IVSC IDs included. The IVSC ACPI device has two physical nodes:

  INTC10CF:00/physical_node  -> platform/INTC10CF:00  (no driver bound)
  INTC10CF:00/physical_node1 -> platform/intel_vsc    (mei_vsc)

so bus_find_device_by_acpi_dev(&platform_bus_type, adev) returns the bare
platform device. ipu_bridge_instantiate_ivsc() then attaches the IVSC
software node to that device instead of to the mei-csi client, the bridge
reports success, and the probe is never retried. mei_csi later probes
without a fwnode, the CSI-2 link is never described, and the sensor ACPI
device, which has an honoured _DEP on the IVSC device, is never
enumerated.

Before those fallbacks existed the lookup returned NULL here, the bridge
failed with -ENODEV and the probe was retried once the IVSC device had
shown up.

Restrict the two fallbacks to the CVS IDs. CVS binds a driver to the ACPI
device itself, so matching on the companion is unambiguous there.

Fixes: c6b1b34b5090 ("media: pci: intel: Add CVS support for IPU bridge driver")
Link: https://lore.kernel.org/linux-media/20260901194526.6369-1-gvozdoder@gmail.com/
Cc: stable@vger.kernel.org
Assisted-by: Claude Code:claude-opus-5
Signed-off-by: Sergey Zagursky <gvozdoder@gmail.com>
---
Changes since v1:
- Wrap the ACPI ID match in a named helper, ipu_bridge_is_cvs_dev(), so the
  polarity is readable at the call site. acpi_match_device_ids() returns 0
  on a match, which made the v1 condition easy to misread. No functional
  change.

v1: https://lore.kernel.org/linux-media/20260901195036.7648-1-gvozdoder@gmail.com/

The functional testing below was done with v1 on the affected machine (Dell
XPS 16 9640, IPU6 + IVSC + ov02c10) on top of 7.2.2, where
drivers/media/pci/intel/ipu-bridge.c is byte-identical to v7.2. v2 changes
only how the same condition is spelled, so I rebuilt it but did not boot it
again. Without the patch libcamera finds no camera at all; with it:

  $ cam -l
  1: Internal front camera (\_SB_.PC00.LNK1)

  $ cam -c1 --capture=5
  202.794954 (30.05 fps) cam0-stream0 seq: 000003 bytesused: 8386560
  202.828224 (30.06 fps) cam0-stream0 seq: 000004 bytesused: 8386560

The media graph gains the entities that were missing:

  - entity 349: Intel IVSC CSI (2 pads, 2 links, 0 routes)
  - entity 368: ov02c10 21-0036 (1 pad, 1 link, 0 routes)

and the restored retry is visible in dmesg:

  pci 0000:00:05.0: deferred probe pending: intel-ipu6: IPU6 bridge init failed
  intel-ipu6 0000:00:05.0: Found supported sensor OVTI02C1:00
  intel-ipu6 0000:00:05.0: Connected 1 cameras

"mei-csi probed without device fwnode!" is gone, ov02c10 binds to
i2c-OVTI02C1:00, and eight v4l-subdev nodes appear.

This patch is against v7.3-rc1. The version tested on 7.2.2 is the same
change without the INTC10FA entry, which 7.2.x does not have. Building
drivers/media/pci/intel/ipu-bridge.c with W=1 produces no new warnings.

Not covered: v2 itself is only compile-tested (no new warnings with W=1);
I have no CVS hardware, so the CVS path is only reasoned about, not tested;
and I have not booted v7.3-rc1 itself.

This patch was produced with the help of an AI coding assistant; see the
Assisted-by tag above and Documentation/process/generated-content.rst.

 drivers/media/pci/intel/ipu-bridge.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/media/pci/intel/ipu-bridge.c b/drivers/media/pci/intel/ipu-bridge.c
index 1bb3a3e98d6b..a29d4bdb8f02 100644
--- a/drivers/media/pci/intel/ipu-bridge.c
+++ b/drivers/media/pci/intel/ipu-bridge.c
@@ -232,6 +232,20 @@ static const struct acpi_device_id ivsc_acpi_ids[] = {
 	{ "INTC10FA" }, /* NVL */
 };
 
+/* The subset of ivsc_acpi_ids[] which are CVS, rather than IVSC, devices. */
+static const struct acpi_device_id cvs_acpi_ids[] = {
+	{ "INTC10DE" }, /* LNL */
+	{ "INTC10E0" }, /* ARL */
+	{ "INTC10E1" }, /* PTL */
+	{ "INTC10FA" }, /* NVL */
+	{ }
+};
+
+static bool ipu_bridge_is_cvs_dev(struct acpi_device *adev)
+{
+	return !acpi_match_device_ids(adev, cvs_acpi_ids);
+}
+
 static struct acpi_device *ipu_bridge_get_ivsc_acpi_dev(struct acpi_device *adev)
 {
 	unsigned int i;
@@ -283,6 +297,17 @@ static struct device *ipu_bridge_get_ivsc_csi_dev(struct acpi_device *adev)
 		return csi_dev;
 	}
 
+	/*
+	 * The lookups below match on the ACPI companion alone. That is fine for
+	 * CVS, which binds a driver to that very device, but not for IVSC: there
+	 * the ACPI device also has a driverless platform device, which would be
+	 * returned instead of the mei-csi client. Return NULL for IVSC so that
+	 * the caller fails and the probe is retried once the IVSC device shows
+	 * up.
+	 */
+	if (!ipu_bridge_is_cvs_dev(adev))
+		return NULL;
+
 	/* Try to locate CVS device on the I2C bus */
 	csi_dev = bus_find_device_by_acpi_dev(&i2c_bus_type, adev);
 	if (csi_dev)
-- 
2.55.0


^ permalink raw reply related	[flat|nested] only message in thread

only message in thread, other threads:[~2026-09-02 14:57 UTC | newest]

Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-09-02 14:54 [PATCH v2] media: ipu-bridge: do not use the CVS device lookup for IVSC Sergey Zagursky

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.