From: "Frédéric Danis" <frederic.danis@collabora.com>
To: linux-bluetooth@vger.kernel.org
Subject: [PATCH BlueZ 2/3] doc/qualification: Add BAP/UCL tests
Date: Thu, 3 Sep 2026 10:57:15 +0200 [thread overview]
Message-ID: <20260903085716.741578-2-frederic.danis@collabora.com> (raw)
In-Reply-To: <20260903085716.741578-1-frederic.danis@collabora.com>
From: Raghavendra Rao Sidlagatta <raghavendra.rao@collabora.com>
---
doc/qualification/bap-pts.rst | 778 ++++++++++++++++++++++++++++++----
1 file changed, 694 insertions(+), 84 deletions(-)
diff --git a/doc/qualification/bap-pts.rst b/doc/qualification/bap-pts.rst
index e85c35ed4..2f81e2ad5 100644
--- a/doc/qualification/bap-pts.rst
+++ b/doc/qualification/bap-pts.rst
@@ -361,6 +361,60 @@ for which we know the test passed.
| | | | | |
| | | | | - [bluetooth]# connect <pts_addr> |
+------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/UCL/SCC/BV-016-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - WirePlumber is stopped |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl': |
+| | | | | |
+| | | | | - [bluetooth]# endpoint.register 00002bc9-0000-1000-8000-00805f9b34fb \ |
+| | | | | 0x06 |
+| | | | | |
+| | | | | .. code-block:: |
+| | | | | |
+| | | | | [/local/endpoint/ep0] Auto Accept (yes/no): y |
+| | | | | [/local/endpoint/ep0] Max Transports (auto/value): a |
+| | | | | [/local/endpoint/ep0] Locations: 1 |
+| | | | | [/local/endpoint/ep0] Supported Context (value): 3 |
+| | | | | [/local/endpoint/ep0] Context (value): 3 |
+| | | | | [/local/endpoint/ep0] CIG (auto/value): 0 |
+| | | | | [/local/endpoint/ep0] CIS (auto/value): 0 |
+| | | | | |
+| | | | | - [bluetooth]# endpoint.register 00002bcb-0000-1000-8000-00805f9b34fb \ |
+| | | | | 0x06 |
+| | | | | |
+| | | | | .. code-block:: |
+| | | | | |
+| | | | | [/local/endpoint/ep1] Auto Accept (yes/no): y |
+| | | | | [/local/endpoint/ep1] Max Transports (auto/value): a |
+| | | | | [/local/endpoint/ep1] Locations: 1 |
+| | | | | [/local/endpoint/ep1] Supported Context (value): 3 |
+| | | | | [/local/endpoint/ep1] Context (value): 3 |
+| | | | | [/local/endpoint/ep1] CIG (auto/value): 0 |
+| | | | | [/local/endpoint/ep1] CIS (auto/value): 0 |
+| | | | | |
+| | | | | - [bluetooth]# endpoint.presets /local/endpoint/ep1 48_6_1 |
+| | | | | |
+| | | | | - [bluetooth]# scan on |
+| | | | | |
+| | | | | On demand: |
+| | | | | |
+| | | | | - accept the pairing request. |
+| | | | | - [bluetooth]# connect <pts_addr> |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Remove local endpoints: |
+| | | | | |
+| | | | | - [bluetooth]# endpoint.unregister /local/endpoint/ep0 |
+| | | | | - [bluetooth]# endpoint.unregister /local/endpoint/ep1 |
+| | | | | |
+| | | | | - Restart Wireplumber |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
| BAP/UCL/SCC/BV-019-C | PASS | 6.14 | 5.85 | Pre-condition: |
| | | | | |
| | | | | - Remove PTS device: |
@@ -585,6 +639,60 @@ for which we know the test passed.
| | | | | |
| | | | | - Remove the rule in 'wireplumber.conf.d/bluetooth.conf' |
+------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/UCL/SCC/BV-050-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - WirePlumber is stopped |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl': |
+| | | | | |
+| | | | | - [bluetooth]# endpoint.register 00002bc9-0000-1000-8000-00805f9b34fb \ |
+| | | | | 0x06 |
+| | | | | |
+| | | | | .. code-block:: |
+| | | | | |
+| | | | | [/local/endpoint/ep0] Auto Accept (yes/no): y |
+| | | | | [/local/endpoint/ep0] Max Transports (auto/value): a |
+| | | | | [/local/endpoint/ep0] Locations: 1 |
+| | | | | [/local/endpoint/ep0] Supported Context (value): 3 |
+| | | | | [/local/endpoint/ep0] Context (value): 3 |
+| | | | | [/local/endpoint/ep0] CIG (auto/value): 0 |
+| | | | | [/local/endpoint/ep0] CIS (auto/value): 0 |
+| | | | | |
+| | | | | - [bluetooth]# endpoint.register 00002bcb-0000-1000-8000-00805f9b34fb \ |
+| | | | | 0x06 |
+| | | | | |
+| | | | | .. code-block:: |
+| | | | | |
+| | | | | [/local/endpoint/ep1] Auto Accept (yes/no): y |
+| | | | | [/local/endpoint/ep1] Max Transports (auto/value): a |
+| | | | | [/local/endpoint/ep1] Locations: 1 |
+| | | | | [/local/endpoint/ep1] Supported Context (value): 3 |
+| | | | | [/local/endpoint/ep1] Context (value): 3 |
+| | | | | [/local/endpoint/ep1] CIG (auto/value): 0 |
+| | | | | [/local/endpoint/ep1] CIS (auto/value): 0 |
+| | | | | |
+| | | | | - [bluetooth]# endpoint.presets /local/endpoint/ep1 48_6_1 |
+| | | | | |
+| | | | | - [bluetooth]# scan on |
+| | | | | |
+| | | | | On demand: |
+| | | | | |
+| | | | | - accept the pairing request. |
+| | | | | - [bluetooth]# connect <pts_addr> |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Remove local endpoints: |
+| | | | | |
+| | | | | - [bluetooth]# endpoint.unregister /local/endpoint/ep0 |
+| | | | | - [bluetooth]# endpoint.unregister /local/endpoint/ep1 |
+| | | | | |
+| | | | | - Restart Wireplumber |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
| BAP/UCL/SCC/BV-054-C | PASS | 6.14 | 5.85 | Pre-condition: |
| | | | | |
| | | | | - Remove PTS device: |
@@ -745,6 +853,60 @@ for which we know the test passed.
| | | | | |
| | | | | - Remove the rule in 'wireplumber.conf.d/bluetooth.conf' |
+------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/UCL/SCC/BV-082-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - WirePlumber is stopped |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl': |
+| | | | | |
+| | | | | - [bluetooth]# endpoint.register 00002bc9-0000-1000-8000-00805f9b34fb \ |
+| | | | | 0x06 |
+| | | | | |
+| | | | | .. code-block:: |
+| | | | | |
+| | | | | [/local/endpoint/ep0] Auto Accept (yes/no): y |
+| | | | | [/local/endpoint/ep0] Max Transports (auto/value): a |
+| | | | | [/local/endpoint/ep0] Locations: 1 |
+| | | | | [/local/endpoint/ep0] Supported Context (value): 3 |
+| | | | | [/local/endpoint/ep0] Context (value): 3 |
+| | | | | [/local/endpoint/ep0] CIG (auto/value): 0 |
+| | | | | [/local/endpoint/ep0] CIS (auto/value): 0 |
+| | | | | |
+| | | | | - [bluetooth]# endpoint.register 00002bcb-0000-1000-8000-00805f9b34fb \ |
+| | | | | 0x06 |
+| | | | | |
+| | | | | .. code-block:: |
+| | | | | |
+| | | | | [/local/endpoint/ep1] Auto Accept (yes/no): y |
+| | | | | [/local/endpoint/ep1] Max Transports (auto/value): a |
+| | | | | [/local/endpoint/ep1] Locations: 1 |
+| | | | | [/local/endpoint/ep1] Supported Context (value): 3 |
+| | | | | [/local/endpoint/ep1] Context (value): 3 |
+| | | | | [/local/endpoint/ep1] CIG (auto/value): 0 |
+| | | | | [/local/endpoint/ep1] CIS (auto/value): 0 |
+| | | | | |
+| | | | | - [bluetooth]# endpoint.presets /local/endpoint/ep1 48_6_2 |
+| | | | | |
+| | | | | - [bluetooth]# scan on |
+| | | | | |
+| | | | | On demand: |
+| | | | | |
+| | | | | - accept the pairing request. |
+| | | | | - [bluetooth]# connect <pts_addr> |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Remove local endpoints: |
+| | | | | |
+| | | | | - [bluetooth]# endpoint.unregister /local/endpoint/ep0 |
+| | | | | - [bluetooth]# endpoint.unregister /local/endpoint/ep1 |
+| | | | | |
+| | | | | - Restart Wireplumber |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
| BAP/UCL/SCC/BV-093-C | PASS | 6.14 | 5.85 | Pre-condition: |
| | | | | |
| | | | | - Remove PTS device: |
@@ -809,7 +971,7 @@ for which we know the test passed.
| | | | | |
| | | | | - Remove the rule in 'wireplumber.conf.d/bluetooth.conf' |
+------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
-| BAP/UCL/STR/BV-535-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| BAP/UCL/STR/BV-523-C | PASS | 6.14 | 5.85 | Pre-condition: |
| | | | | |
| | | | | - Remove PTS device: |
| | | | | |
@@ -825,48 +987,40 @@ for which we know the test passed.
| | | | | |
| | | | | - [bluetooth]# connect <pts_addr> |
| | | | | |
-| | | | | If nothing occurs after connection and pairing, check that audio input |
-| | | | | is set to the PTS device. |
+| | | | | If nothing occurs after connection and pairing, check that audio output |
+| | | | | and audio input are set to the PTS device. |
+------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
-| BAP/UCL/STR/BV-543-C | PASS | 6.14 | 5.87 | Pre-condition: |
-| | | | | |
-| | | | | - Remove PTS device: |
-| | | | | |
-| | | | | - bluetoothctl remove <pts_addr> |
+| BAP/UCL/STR/BV-526-C | PASS | 6.14 | 5.85 | Pre-condition: |
| | | | | |
-| | | | | - WirePlumber is stopped |
+| BAP/UCL/STR/BV-526-C_LT2 | | | | - Remove PTS devices: |
| | | | | |
-| | | | | - Create data file: |
+| | | | | - bluetoothctl remove <pts_addr1> |
+| | | | | - bluetoothctl remove <pts_addr2> |
| | | | | |
-| | | | | - dd if=/dev/zero of=/tmp/bap.data bs=512 count=1 |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | | - Two PTS applications are running and connected 2 dongles |
| | | | +-------------------------------------------------------------------------+
| | | | | Run 'bluetoothctl': |
| | | | | |
-| | | | | - [bluetooth]# endpoint.register 00002bc9-0000-1000-8000-00805f9b34fb \ |
-| | | | | 0x06 |
+| | | | | - [bluetooth]# scan on |
| | | | | |
-| | | | | .. code-block:: |
+| | | | | On demand: |
| | | | | |
-| | | | | [/local/endpoint/ep0] Auto Accept (yes/no): y |
-| | | | | [/local/endpoint/ep0] Max Transports (auto/value): a |
-| | | | | [/local/endpoint/ep0] Locations: 1 |
-| | | | | [/local/endpoint/ep0] Supported Context (value): 3 |
-| | | | | [/local/endpoint/ep0] Context (value): 3 |
-| | | | | [/local/endpoint/ep0] CIG (auto/value): 0 |
-| | | | | [/local/endpoint/ep0] CIS (auto/value): 0 |
+| | | | | - [bluetooth]# connect <pts_addr1> |
+| | | | | - [bluetooth]# connect <pts_addr2> |
| | | | | |
-| | | | | - [bluetooth]# endpoint.register 00002bcb-0000-1000-8000-00805f9b34fb \ |
-| | | | | 0x06 |
+| | | | | If nothing occurs after connection and pairing, check that audio output |
+| | | | | and audio input are set to the PTS devices. |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/UCL/STR/BV-527-C | PASS | 6.14 | 5.85 | Pre-condition: |
| | | | | |
-| | | | | .. code-block:: |
+| | | | | - Remove PTS device: |
| | | | | |
-| | | | | [/local/endpoint/ep1] Auto Accept (yes/no): y |
-| | | | | [/local/endpoint/ep1] Max Transports (auto/value): a |
-| | | | | [/local/endpoint/ep1] Locations: 1 |
-| | | | | [/local/endpoint/ep1] Supported Context (value): 3 |
-| | | | | [/local/endpoint/ep1] Context (value): 3 |
-| | | | | [/local/endpoint/ep1] CIG (auto/value): 0 |
-| | | | | [/local/endpoint/ep1] CIS (auto/value): 0 |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl': |
| | | | | |
| | | | | - [bluetooth]# scan on |
| | | | | |
@@ -874,81 +1028,250 @@ for which we know the test passed.
| | | | | |
| | | | | - [bluetooth]# connect <pts_addr> |
| | | | | |
-| | | | | After transport Desynchronized properties are displayed: |
-| | | | | |
-| | | | | - [PTS-BAP-FE56]> transport.desync \ |
-| | | | | /org/bluez/hci0/dev_<BD_ADDR>/pac_sink0/fd0 on |
-| | | | | - [PTS-BAP-FE56]> transport.acquire \ |
-| | | | | /org/bluez/hci0/dev_<BD_ADDR>/pac_sink0/fd0 |
+| | | | | If nothing occurs after connection and pairing, check that audio output |
+| | | | | is set to the PTS device. |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/UCL/STR/BV-528-C | PASS | 6.14 | 5.85 | Pre-condition: |
| | | | | |
-| | | | | After transport has been acquired: |
+| BAP/UCL/STR/BV-528-C_LT2 | | | | - Remove PTS devices: |
| | | | | |
-| | | | | - [PTS-BAP-FE56]> transport.acquire \ |
-| | | | | /org/bluez/hci0/dev_<BD_ADDR>/pac_source0/fd1 |
-| | | | | - [PTS-BAP-FE56]> transport.send \ |
-| | | | | /org/bluez/hci0/dev_<BD_ADDR>/pac_sink0/fd0 /tmp/bap.data |
+| | | | | - bluetoothctl remove <pts_addr1> |
+| | | | | - bluetoothctl remove <pts_addr2> |
| | | | | |
-| | | | | Click OK on "After processed audio stream data, please click OK" |
-| | | | | request. |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | | - Two PTS applications are running and connected to 2 dongles |
| | | | +-------------------------------------------------------------------------+
-| | | | | Post-condition: |
+| | | | | Run 'bluetoothctl': |
| | | | | |
-| | | | | - Remove local endpoints: |
+| | | | | - [bluetooth]# scan on |
| | | | | |
-| | | | | - [bluetooth]# endpoint.unregister /local/endpoint/ep0 |
-| | | | | - [bluetooth]# endpoint.unregister /local/endpoint/ep1 |
+| | | | | On demand: |
| | | | | |
-| | | | | - Restart Wireplumber |
+| | | | | - [bluetooth]# connect <pts_addr1> |
+| | | | | - [bluetooth]# connect <pts_addr2> |
+| | | | | |
+| | | | | If nothing occurs after connection and pairing, check that audio output |
+| | | | | is set to the PTS device. |
+------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
-| BAP/UCL/STR/BV-546-C | PASS | 6.14 | 5.87 | Pre-condition: |
+| BAP/UCL/STR/BV-529-C | PASS | 6.14 | 5.85 | Pre-condition: |
| | | | | |
| | | | | - Remove PTS device: |
| | | | | |
| | | | | - bluetoothctl remove <pts_addr> |
| | | | | |
-| | | | | - WirePlumber is stopped |
-| | | | | |
-| | | | | - Create data file: |
-| | | | | |
-| | | | | - dd if=/dev/zero of=/tmp/bap.data bs=512 count=1 |
+| | | | | - PipeWire And WirePlumber are running |
| | | | +-------------------------------------------------------------------------+
| | | | | Run 'bluetoothctl': |
| | | | | |
-| | | | | - [bluetooth]# endpoint.register 00002bc9-0000-1000-8000-00805f9b34fb \ |
-| | | | | 0x06 |
-| | | | | |
-| | | | | .. code-block:: |
-| | | | | |
-| | | | | [/local/endpoint/ep0] Auto Accept (yes/no): y |
-| | | | | [/local/endpoint/ep0] Max Transports (auto/value): a |
-| | | | | [/local/endpoint/ep0] Locations: 1 |
-| | | | | [/local/endpoint/ep0] Supported Context (value): 3 |
-| | | | | [/local/endpoint/ep0] Context (value): 3 |
-| | | | | [/local/endpoint/ep0] CIG (auto/value): 0 |
-| | | | | [/local/endpoint/ep0] CIS (auto/value): 0 |
-| | | | | |
-| | | | | - [bluetooth]# endpoint.register 00002bcb-0000-1000-8000-00805f9b34fb \ |
-| | | | | 0x06 |
-| | | | | |
-| | | | | .. code-block:: |
-| | | | | |
-| | | | | [/local/endpoint/ep1] Auto Accept (yes/no): y |
-| | | | | [/local/endpoint/ep1] Max Transports (auto/value): a |
-| | | | | [/local/endpoint/ep1] Locations: 1 |
-| | | | | [/local/endpoint/ep1] Supported Context (value): 3 |
-| | | | | [/local/endpoint/ep1] Context (value): 3 |
-| | | | | [/local/endpoint/ep1] CIG (auto/value): 0 |
-| | | | | [/local/endpoint/ep1] CIS (auto/value): 0 |
-| | | | | |
| | | | | - [bluetooth]# scan on |
| | | | | |
| | | | | On demand: |
| | | | | |
| | | | | - [bluetooth]# connect <pts_addr> |
| | | | | |
-| | | | | After transport Desynchronized properties are displayed: |
-| | | | | |
-| | | | | - [PTS-BAP-FE56]> transport.desync \ |
+| | | | | If nothing occurs after connection and pairing, check that audio input |
+| | | | | is set to the PTS device. |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/UCL/STR/BV-530-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| BAP/UCL/STR/BV-530-C_LT2 | | | | - Remove PTS devices: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr1> |
+| | | | | - bluetoothctl remove <pts_addr2> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | | - Two PTS applications are running and connected to 2 dongles |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl': |
+| | | | | |
+| | | | | - [bluetooth]# scan on |
+| | | | | |
+| | | | | On demand: |
+| | | | | |
+| | | | | - [bluetooth]# connect <pts_addr1> |
+| | | | | - [bluetooth]# connect <pts_addr2> |
+| | | | | |
+| | | | | If nothing occurs after connection and pairing, check that audio input |
+| | | | | is set to the PTS device. |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/UCL/STR/BV-535-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl': |
+| | | | | |
+| | | | | - [bluetooth]# scan on |
+| | | | | |
+| | | | | On demand: |
+| | | | | |
+| | | | | - [bluetooth]# connect <pts_addr> |
+| | | | | |
+| | | | | If nothing occurs after connection and pairing, check that audio input |
+| | | | | is set to the PTS device. |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/UCL/STR/BV-537-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl': |
+| | | | | |
+| | | | | - [bluetooth]# scan on |
+| | | | | |
+| | | | | On demand: |
+| | | | | |
+| | | | | - [bluetooth]# connect <pts_addr> |
+| | | | | |
+| | | | | If nothing occurs after connection and pairing, check that audio output |
+| | | | | is set to the PTS device. |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/UCL/STR/BV-538-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl': |
+| | | | | |
+| | | | | - [bluetooth]# scan on |
+| | | | | |
+| | | | | On demand: |
+| | | | | |
+| | | | | - [bluetooth]# connect <pts_addr> |
+| | | | | |
+| | | | | If nothing occurs after connection and pairing, check that audio output |
+| | | | | is set to the PTS device. |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/UCL/STR/BV-543-C | PASS | 6.14 | 5.87 | Pre-condition: |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - WirePlumber is stopped |
+| | | | | |
+| | | | | - Create data file: |
+| | | | | |
+| | | | | - dd if=/dev/zero of=/tmp/bap.data bs=512 count=1 |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl': |
+| | | | | |
+| | | | | - [bluetooth]# endpoint.register 00002bc9-0000-1000-8000-00805f9b34fb \ |
+| | | | | 0x06 |
+| | | | | |
+| | | | | .. code-block:: |
+| | | | | |
+| | | | | [/local/endpoint/ep0] Auto Accept (yes/no): y |
+| | | | | [/local/endpoint/ep0] Max Transports (auto/value): a |
+| | | | | [/local/endpoint/ep0] Locations: 1 |
+| | | | | [/local/endpoint/ep0] Supported Context (value): 3 |
+| | | | | [/local/endpoint/ep0] Context (value): 3 |
+| | | | | [/local/endpoint/ep0] CIG (auto/value): 0 |
+| | | | | [/local/endpoint/ep0] CIS (auto/value): 0 |
+| | | | | |
+| | | | | - [bluetooth]# endpoint.register 00002bcb-0000-1000-8000-00805f9b34fb \ |
+| | | | | 0x06 |
+| | | | | |
+| | | | | .. code-block:: |
+| | | | | |
+| | | | | [/local/endpoint/ep1] Auto Accept (yes/no): y |
+| | | | | [/local/endpoint/ep1] Max Transports (auto/value): a |
+| | | | | [/local/endpoint/ep1] Locations: 1 |
+| | | | | [/local/endpoint/ep1] Supported Context (value): 3 |
+| | | | | [/local/endpoint/ep1] Context (value): 3 |
+| | | | | [/local/endpoint/ep1] CIG (auto/value): 0 |
+| | | | | [/local/endpoint/ep1] CIS (auto/value): 0 |
+| | | | | |
+| | | | | - [bluetooth]# scan on |
+| | | | | |
+| | | | | On demand: |
+| | | | | |
+| | | | | - [bluetooth]# connect <pts_addr> |
+| | | | | |
+| | | | | After transport Desynchronized properties are displayed: |
+| | | | | |
+| | | | | - [PTS-BAP-FE56]> transport.desync \ |
+| | | | | /org/bluez/hci0/dev_<BD_ADDR>/pac_sink0/fd0 on |
+| | | | | - [PTS-BAP-FE56]> transport.acquire \ |
+| | | | | /org/bluez/hci0/dev_<BD_ADDR>/pac_sink0/fd0 |
+| | | | | |
+| | | | | After transport has been acquired: |
+| | | | | |
+| | | | | - [PTS-BAP-FE56]> transport.acquire \ |
+| | | | | /org/bluez/hci0/dev_<BD_ADDR>/pac_source0/fd1 |
+| | | | | - [PTS-BAP-FE56]> transport.send \ |
+| | | | | /org/bluez/hci0/dev_<BD_ADDR>/pac_sink0/fd0 /tmp/bap.data |
+| | | | | |
+| | | | | Click OK on "After processed audio stream data, please click OK" |
+| | | | | request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Remove local endpoints: |
+| | | | | |
+| | | | | - [bluetooth]# endpoint.unregister /local/endpoint/ep0 |
+| | | | | - [bluetooth]# endpoint.unregister /local/endpoint/ep1 |
+| | | | | |
+| | | | | - Restart Wireplumber |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/UCL/STR/BV-546-C | PASS | 6.14 | 5.87 | Pre-condition: |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - WirePlumber is stopped |
+| | | | | |
+| | | | | - Create data file: |
+| | | | | |
+| | | | | - dd if=/dev/zero of=/tmp/bap.data bs=512 count=1 |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl': |
+| | | | | |
+| | | | | - [bluetooth]# endpoint.register 00002bc9-0000-1000-8000-00805f9b34fb \ |
+| | | | | 0x06 |
+| | | | | |
+| | | | | .. code-block:: |
+| | | | | |
+| | | | | [/local/endpoint/ep0] Auto Accept (yes/no): y |
+| | | | | [/local/endpoint/ep0] Max Transports (auto/value): a |
+| | | | | [/local/endpoint/ep0] Locations: 1 |
+| | | | | [/local/endpoint/ep0] Supported Context (value): 3 |
+| | | | | [/local/endpoint/ep0] Context (value): 3 |
+| | | | | [/local/endpoint/ep0] CIG (auto/value): 0 |
+| | | | | [/local/endpoint/ep0] CIS (auto/value): 0 |
+| | | | | |
+| | | | | - [bluetooth]# endpoint.register 00002bcb-0000-1000-8000-00805f9b34fb \ |
+| | | | | 0x06 |
+| | | | | |
+| | | | | .. code-block:: |
+| | | | | |
+| | | | | [/local/endpoint/ep1] Auto Accept (yes/no): y |
+| | | | | [/local/endpoint/ep1] Max Transports (auto/value): a |
+| | | | | [/local/endpoint/ep1] Locations: 1 |
+| | | | | [/local/endpoint/ep1] Supported Context (value): 3 |
+| | | | | [/local/endpoint/ep1] Context (value): 3 |
+| | | | | [/local/endpoint/ep1] CIG (auto/value): 0 |
+| | | | | [/local/endpoint/ep1] CIS (auto/value): 0 |
+| | | | | |
+| | | | | - [bluetooth]# scan on |
+| | | | | |
+| | | | | On demand: |
+| | | | | |
+| | | | | - [bluetooth]# connect <pts_addr> |
+| | | | | |
+| | | | | After transport Desynchronized properties are displayed: |
+| | | | | |
+| | | | | - [PTS-BAP-FE56]> transport.desync \ |
| | | | | /org/bluez/hci0/dev_<BD_ADDR>/pac_source0/fd1 on |
| | | | | - [PTS-BAP-FE56]> transport.acquire \ |
| | | | | /org/bluez/hci0/dev_<BD_ADDR>/pac_source0/fd1 |
@@ -972,6 +1295,158 @@ for which we know the test passed.
| | | | | |
| | | | | - Restart Wireplumber |
+------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/UCL/STR/BV-552-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl': |
+| | | | | |
+| | | | | - [bluetooth]# scan on |
+| | | | | |
+| | | | | On demand: |
+| | | | | |
+| | | | | - [bluetooth]# connect <pts_addr> |
+| | | | | |
+| | | | | If nothing occurs after connection and pairing, check that audio input |
+| | | | | is set to the PTS device. |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/UCL/STR/BV-553-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl': |
+| | | | | |
+| | | | | - [bluetooth]# scan on |
+| | | | | |
+| | | | | On demand: |
+| | | | | |
+| | | | | - [bluetooth]# connect <pts_addr> |
+| | | | | |
+| | | | | If nothing occurs after connection and pairing, check that audio input |
+| | | | | is set to the PTS device. |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/UCL/STR/BV-554-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl': |
+| | | | | |
+| | | | | - [bluetooth]# scan on |
+| | | | | |
+| | | | | On demand: |
+| | | | | |
+| | | | | - [bluetooth]# connect <pts_addr> |
+| | | | | |
+| | | | | If nothing occurs after connection and pairing, check that audio input |
+| | | | | is set to the PTS device. |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/UCL/STR/BV-555-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl': |
+| | | | | |
+| | | | | - [bluetooth]# scan on |
+| | | | | |
+| | | | | On demand: |
+| | | | | |
+| | | | | - [bluetooth]# connect <pts_addr> |
+| | | | | |
+| | | | | If nothing occurs after connection and pairing, check that audio input |
+| | | | | is set to the PTS device. |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/UCL/STR/BV-556-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl': |
+| | | | | |
+| | | | | - [bluetooth]# scan on |
+| | | | | |
+| | | | | On demand: |
+| | | | | |
+| | | | | - [bluetooth]# connect <pts_addr> |
+| | | | | |
+| | | | | If nothing occurs after connection and pairing, check that audio output |
+| | | | | is set to the PTS device. |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/UCL/STR/BV-557-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl': |
+| | | | | |
+| | | | | - [bluetooth]# scan on |
+| | | | | |
+| | | | | On demand: |
+| | | | | |
+| | | | | - [bluetooth]# connect <pts_addr> |
+| | | | | |
+| | | | | If nothing occurs after connection and pairing, check that audio output |
+| | | | | is set to the PTS device. |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/UCL/STR/BV-558-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl': |
+| | | | | |
+| | | | | - [bluetooth]# scan on |
+| | | | | |
+| | | | | On demand: |
+| | | | | |
+| | | | | - [bluetooth]# connect <pts_addr> |
+| | | | | |
+| | | | | If nothing occurs after connection and pairing, check that audio output |
+| | | | | is set to the PTS device. |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/UCL/STR/BV-559-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl': |
+| | | | | |
+| | | | | - [bluetooth]# scan on |
+| | | | | |
+| | | | | On demand: |
+| | | | | |
+| | | | | - [bluetooth]# connect <pts_addr> |
+| | | | | |
+| | | | | If nothing occurs after connection and pairing, check that audio output |
+| | | | | is set to the PTS device. |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
| BAP/UCL/STR/BV-568-C | PASS | 6.14 | 5.85 | Pre-condition: |
| | | | | |
| | | | | - Remove PTS device: |
@@ -1010,3 +1485,138 @@ for which we know the test passed.
| | | | | If nothing occurs after connection and pairing, check that audio input |
| | | | | is set to the PTS device. |
+------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/UCL/STR/BV-570-C | PASS | 6.14 | 5.87 | Pre-condition: |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - WirePlumber is stopped |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl': |
+| | | | | |
+| | | | | - [bluetooth]# endpoint.register 00002bc9-0000-1000-8000-00805f9b34fb \ |
+| | | | | 0x06 |
+| | | | | |
+| | | | | .. code-block:: |
+| | | | | |
+| | | | | [/local/endpoint/ep0] Auto Accept (yes/no): y |
+| | | | | [/local/endpoint/ep0] Max Transports (auto/value): a |
+| | | | | [/local/endpoint/ep0] Locations: 1 |
+| | | | | [/local/endpoint/ep0] Supported Context (value): 3 |
+| | | | | [/local/endpoint/ep0] Context (value): 3 |
+| | | | | [/local/endpoint/ep0] CIG (auto/value): 0 |
+| | | | | [/local/endpoint/ep0] CIS (auto/value): 0 |
+| | | | | |
+| | | | | - [bluetooth]# endpoint.register 00002bcb-0000-1000-8000-00805f9b34fb \ |
+| | | | | 0x06 |
+| | | | | |
+| | | | | .. code-block:: |
+| | | | | |
+| | | | | [/local/endpoint/ep1] Auto Accept (yes/no): y |
+| | | | | [/local/endpoint/ep1] Max Transports (auto/value): a |
+| | | | | [/local/endpoint/ep1] Locations: 1 |
+| | | | | [/local/endpoint/ep1] Supported Context (value): 3 |
+| | | | | [/local/endpoint/ep1] Context (value): 3 |
+| | | | | [/local/endpoint/ep1] CIG (auto/value): 0 |
+| | | | | [/local/endpoint/ep1] CIS (auto/value): 0 |
+| | | | | |
+| | | | | - [bluetooth]# scan on |
+| | | | | |
+| | | | | On demand: |
+| | | | | |
+| | | | | - [bluetooth]# connect <pts_addr> |
+| | | | | |
+| | | | | After transport properties are displayed: |
+| | | | | |
+| | | | | - [PTS-BAP-FE56]> transport.acquire \ |
+| | | | | /org/bluez/hci0/dev_<BD_ADDR>/pac_source0/fd0 |
+| | | | | |
+| | | | | Click OK on "After processed audio stream data, please click OK" |
+| | | | | request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Remove local endpoints: |
+| | | | | |
+| | | | | - [bluetooth]# endpoint.unregister /local/endpoint/ep0 |
+| | | | | - [bluetooth]# endpoint.unregister /local/endpoint/ep1 |
+| | | | | |
+| | | | | - Restart Wireplumber |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/UCL/STR/BV-575-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl': |
+| | | | | |
+| | | | | - [bluetooth]# scan on |
+| | | | | |
+| | | | | On demand: |
+| | | | | |
+| | | | | - [bluetooth]# connect <pts_addr> |
+| | | | | |
+| | | | | If nothing occurs after connection and pairing, check that audio output |
+| | | | | is set to the PTS device. |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/UCL/STR/BV-577-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl': |
+| | | | | |
+| | | | | - [bluetooth]# scan on |
+| | | | | |
+| | | | | On demand: |
+| | | | | |
+| | | | | - [bluetooth]# connect <pts_addr> |
+| | | | | |
+| | | | | If nothing occurs after connection and pairing, check that audio output |
+| | | | | is set to the PTS device. |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/UCL/STR/BV-578-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl': |
+| | | | | |
+| | | | | - [bluetooth]# scan on |
+| | | | | |
+| | | | | On demand: |
+| | | | | |
+| | | | | - [bluetooth]# connect <pts_addr> |
+| | | | | |
+| | | | | If nothing occurs after connection and pairing, check that audio output |
+| | | | | is set to the PTS device. |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/UCL/STR/BV-579-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl': |
+| | | | | |
+| | | | | - [bluetooth]# scan on |
+| | | | | |
+| | | | | On demand: |
+| | | | | |
+| | | | | - [bluetooth]# connect <pts_addr> |
+| | | | | |
+| | | | | If nothing occurs after connection and pairing, check that audio output |
+| | | | | is set to the PTS device. |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
--
2.43.0
next prev parent reply other threads:[~2026-09-03 8:57 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-03 8:57 [PATCH BlueZ 1/3] doc/qualification: Add PICS and howto for the BAP qualification Frédéric Danis
2026-09-03 8:57 ` Frédéric Danis [this message]
2026-09-03 8:57 ` [PATCH BlueZ 3/3] doc/qualification: Add BAP/USR tests Frédéric Danis
2026-09-03 11:53 ` [BlueZ,1/3] doc/qualification: Add PICS and howto for the BAP qualification bluez.test.bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260903085716.741578-2-frederic.danis@collabora.com \
--to=frederic.danis@collabora.com \
--cc=linux-bluetooth@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.