From: "Frédéric Danis" <frederic.danis@collabora.com>
To: linux-bluetooth@vger.kernel.org
Subject: [PATCH BlueZ 3/3] doc/qualification: Add BAP/USR tests
Date: Thu, 3 Sep 2026 10:57:16 +0200 [thread overview]
Message-ID: <20260903085716.741578-3-frederic.danis@collabora.com> (raw)
In-Reply-To: <20260903085716.741578-1-frederic.danis@collabora.com>
From: Raghavendra Rao Sidlagatta <raghavendra.rao@collabora.com>
---
doc/qualification/bap-pts.rst | 1992 +++++++++++++++++++++++++++++++++
1 file changed, 1992 insertions(+)
diff --git a/doc/qualification/bap-pts.rst b/doc/qualification/bap-pts.rst
index 2f81e2ad5..53a627dbc 100644
--- a/doc/qualification/bap-pts.rst
+++ b/doc/qualification/bap-pts.rst
@@ -1620,3 +1620,1995 @@ for which we know the test passed.
| | | | | If nothing occurs after connection and pairing, check that audio output |
| | | | | is set to the PTS device. |
+------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/ADV/BV-01-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/ADV/BV-04-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - Add rule to force Targeted Announcement in 'monitor.bluez.rules' of |
+| | | | | 'wireplumber.conf.d/announcement.conf':: |
+| | | | | |
+| | | | | monitor.bluez.properties = { |
+| | | | | bluez5.bap-server.ascs-announcement = "targeted" |
+| | | | | } |
+| | | | | |
+| | | | | - Restart PipeWire And WirePlumber |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/DISC/BV-01-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/DISC/BV-02-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/DISC/BV-05-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/DISC/BV-06-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/DISC/BV-07-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-003-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-004-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-006-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-007-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-008-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-011-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-012-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-013-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-014-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-015-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-016-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-019-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-020-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-023-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-024-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-071-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-072-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-075-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-076-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-079-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-080-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-081-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-082-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-083-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-084-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-087-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-088-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-091-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-092-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-104-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-106-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-111-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-112-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-113-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-114-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-115-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-116-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-135-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-136-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-137-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-138-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-139-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-143-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-144-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-145-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-146-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-147-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-148-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-149-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-150-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-161-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-162-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-163-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-167-C | PASS | 6.14 | 5.87 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SCC/BV-168-C | PASS | 6.14 | 5.87 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SPE/BI-01-C | PASS | 6.14 | 5.87 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SPE/BI-02-C | PASS | 6.14 | 5.87 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SPE/BI-03-C | PASS | 6.14 | 5.87 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SPE/BI-04-C | PASS | 6.14 | 5.87 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/SPE/BI-05-C | PASS | 6.14 | 5.87 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - PipeWire And WirePlumber are running |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/STR/BV-360-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - Add rule to force automatic linking of Bluetooth input and Bluetooth |
+| | | | | output ensuring both are opened using |
+| | | | | 'wireplumber.conf.d/auto-bluez.conf':: |
+| | | | | |
+| | | | | wireplumber.components = [ { |
+| | | | | name = /path/to/.config/wireplumber/scripts/ |
+| | | | | link-bt-microphone-with-speakers.lua, |
+| | | | | type = script/lua, |
+| | | | | requires = [ si.standard-link, si.audio-adapter ] |
+| | | | | } |
+| | | | | |
+| | | | | Refer Scripts section for 'link-bt-microphone-with-speakers.lua' |
+| | | | | |
+| | | | | - Restart PipeWire And WirePlumber |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | | |
+| | | | | Click YES on "Please confirm received streaming data..." request. |
+| | | | | |
+| | | | | Click OK on "Please send valid streaming data" request. |
+| | | | | |
+| | | | | Click YES on "Please click yes when IUT has verified audio stream data" |
+| | | | | request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/STR/BV-362-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - Add rule to force automatic linking of Bluetooth input and Bluetooth |
+| | | | | output ensuring both are opened using |
+| | | | | 'wireplumber.conf.d/auto-bluez.conf':: |
+| | | | | |
+| | | | | wireplumber.components = [ { |
+| | | | | name = /path/to/.config/wireplumber/scripts/ |
+| | | | | link-bt-microphone-with-speakers.lua, |
+| | | | | type = script/lua, |
+| | | | | requires = [ si.standard-link, si.audio-adapter ] |
+| | | | | } |
+| | | | | |
+| | | | | Refer Scripts section for 'link-bt-microphone-with-speakers.lua' |
+| | | | | |
+| | | | | - Restart PipeWire And WirePlumber |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | | |
+| | | | | Click YES on "Please confirm received streaming data..." request. |
+| | | | | |
+| | | | | Click OK on "Please send valid streaming data" request. |
+| | | | | |
+| | | | | Click YES on "Please click yes when IUT has verified audio stream data" |
+| | | | | request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/STR/BV-367-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - Add rule to force automatic linking of Bluetooth input and Bluetooth |
+| | | | | output ensuring both are opened using |
+| | | | | 'wireplumber.conf.d/auto-bluez.conf':: |
+| | | | | |
+| | | | | wireplumber.components = [ { |
+| | | | | name = /path/to/.config/wireplumber/scripts/ |
+| | | | | link-bt-microphone-with-speakers.lua, |
+| | | | | type = script/lua, |
+| | | | | requires = [ si.standard-link, si.audio-adapter ] |
+| | | | | } |
+| | | | | |
+| | | | | Refer Scripts section for 'link-bt-microphone-with-speakers.lua' |
+| | | | | |
+| | | | | - Restart PipeWire And WirePlumber |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | | |
+| | | | | Click YES on "Please confirm received streaming data..." request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/STR/BV-369-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - Add rule to force automatic linking of Bluetooth input and Bluetooth |
+| | | | | output ensuring both are opened using |
+| | | | | 'wireplumber.conf.d/auto-bluez.conf':: |
+| | | | | |
+| | | | | wireplumber.components = [ { |
+| | | | | name = /path/to/.config/wireplumber/scripts/ |
+| | | | | link-bt-microphone-with-speakers.lua, |
+| | | | | type = script/lua, |
+| | | | | requires = [ si.standard-link, si.audio-adapter ] |
+| | | | | } |
+| | | | | |
+| | | | | Refer Scripts section for 'link-bt-microphone-with-speakers.lua' |
+| | | | | |
+| | | | | - Restart PipeWire And WirePlumber |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | | |
+| | | | | Click YES on "Please confirm received streaming data..." request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/STR/BV-375-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - Add rule to force automatic linking of Bluetooth input and Bluetooth |
+| | | | | output ensuring both are opened using |
+| | | | | 'wireplumber.conf.d/auto-bluez.conf':: |
+| | | | | |
+| | | | | wireplumber.components = [ { |
+| | | | | name = /path/to/.config/wireplumber/scripts/ |
+| | | | | link-bt-microphone-with-speakers.lua, |
+| | | | | type = script/lua, |
+| | | | | requires = [ si.standard-link, si.audio-adapter ] |
+| | | | | } |
+| | | | | |
+| | | | | Refer Scripts section for 'link-bt-microphone-with-speakers.lua' |
+| | | | | |
+| | | | | - Restart PipeWire And WirePlumber |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | | |
+| | | | | Click YES on "Please confirm received streaming data..." request. |
+| | | | | |
+| | | | | Click OK on "Please send valid streaming data" request. |
+| | | | | |
+| | | | | Click YES on "Please click yes when IUT has verified audio stream data" |
+| | | | | request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/STR/BV-377-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - Add rule to force automatic linking of Bluetooth input and Bluetooth |
+| | | | | output ensuring both are opened using |
+| | | | | 'wireplumber.conf.d/auto-bluez.conf':: |
+| | | | | |
+| | | | | wireplumber.components = [ { |
+| | | | | name = /path/to/.config/wireplumber/scripts/ |
+| | | | | link-bt-microphone-with-speakers.lua, |
+| | | | | type = script/lua, |
+| | | | | requires = [ si.standard-link, si.audio-adapter ] |
+| | | | | } |
+| | | | | |
+| | | | | Refer Scripts section for 'link-bt-microphone-with-speakers.lua' |
+| | | | | |
+| | | | | - Restart PipeWire And WirePlumber |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | | |
+| | | | | Click YES on "Please confirm received streaming data..." request. |
+| | | | | |
+| | | | | Click OK on "Please send valid streaming data" request. |
+| | | | | |
+| | | | | Click YES on "Please click yes when IUT has verified audio stream data" |
+| | | | | request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/STR/BV-378-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - Add rule to force automatic linking of Bluetooth input and Bluetooth |
+| | | | | output ensuring both are opened using |
+| | | | | 'wireplumber.conf.d/auto-bluez.conf':: |
+| | | | | |
+| | | | | wireplumber.components = [ { |
+| | | | | name = /path/to/.config/wireplumber/scripts/ |
+| | | | | link-bt-microphone-with-speakers.lua, |
+| | | | | type = script/lua, |
+| | | | | requires = [ si.standard-link, si.audio-adapter ] |
+| | | | | } |
+| | | | | |
+| | | | | Refer Scripts section for 'link-bt-microphone-with-speakers.lua' |
+| | | | | |
+| | | | | - Restart PipeWire And WirePlumber |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | | |
+| | | | | Click YES on "Please confirm received streaming data..." request. |
+| | | | | |
+| | | | | Click OK on "Please send valid streaming data" request. |
+| | | | | |
+| | | | | Click YES on "Please click yes when IUT has verified audio stream data" |
+| | | | | request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+| BAP/USR/STR/BV-380-C | PASS | 6.14 | 5.85 | Pre-condition: |
+| | | | | |
+| | | | | - Force PTS to perform pairing: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS |
+| | | | | |
+| | | | | - Remove PTS device: |
+| | | | | |
+| | | | | - bluetoothctl remove <pts_addr> |
+| | | | | |
+| | | | | - Add rule to force automatic linking of Bluetooth input and Bluetooth |
+| | | | | output ensuring both are opened using |
+| | | | | 'wireplumber.conf.d/auto-bluez.conf':: |
+| | | | | |
+| | | | | wireplumber.components = [ { |
+| | | | | name = /path/to/.config/wireplumber/scripts/ |
+| | | | | link-bt-microphone-with-speakers.lua, |
+| | | | | type = script/lua, |
+| | | | | requires = [ si.standard-link, si.audio-adapter ] |
+| | | | | } |
+| | | | | |
+| | | | | Refer Scripts section for 'link-bt-microphone-with-speakers.lua' |
+| | | | | |
+| | | | | - Restart PipeWire And WirePlumber |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Run 'bluetoothctl'. |
+| | | | | |
+| | | | | On demand accept the pairing request. |
+| | | | | |
+| | | | | Click YES on "Please confirm received streaming data..." request. |
+| | | | | |
+| | | | | Click OK on "Please send valid streaming data" request. |
+| | | | | |
+| | | | | Click YES on "Please click yes when IUT has verified audio stream data" |
+| | | | | request. |
+| | | | +-------------------------------------------------------------------------+
+| | | | | Post-condition: |
+| | | | | |
+| | | | | - Reset PTS to previous configuration: |
+| | | | | |
+| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS |
+| | | | | |
++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
+
+Scripts
+========
+
+The script below is useful to automate the linking of Bluetooth input and
+Bluetooth output, ensuring both are opened.
+
+link-bt-microphone-with-speakers.lua::
+
+ #!/usr/bin/wpexec
+
+ log = Log.open_topic('auto-bluez')
+
+ function parseBool (var)
+ return var and (var:lower () == "true" or var == "1")
+ end
+
+ function createLink (si, target)
+ local si_props = si.properties
+ local target_props = target.properties
+ local out_item = nil
+ local in_item = nil
+ local si_link = nil
+
+ if si_props["item.node.direction"] == "output" then
+ -- playback
+ out_item = si
+ in_item = target
+ else
+ -- capture
+ in_item = si
+ out_item = target
+ end
+
+ log:info (si,
+ string.format ("link %s <-> %s",
+ tostring (si_props ["node.name"]),
+ tostring (target_props ["node.name"])))
+
+ -- create and configure link
+ si_link = SessionItem ("si-standard-link")
+ if not si_link:configure {
+ ["out.item"] = out_item,
+ ["in.item"] = in_item,
+ ["passthrough"] = false,
+ ["exclusive"] = parseBool (si_props ["node.exclusive"]),
+ ["out.item.port.context"] = "output",
+ ["in.item.port.context"] = "input",
+ ["media.role"] = si_props["media.role"],
+ ["target.media.class"] = target_props["media.class"],
+ ["policy.role-based.priority"] = target_props["policy.role-based.priority"],
+ ["policy.role-based.action.same-priority"] = target_props["policy.role-based.action.same-priority"],
+ ["policy.role-based.action.lower-priority"] = target_props["policy.role-based.action.lower-priority"],
+ ["is.role.policy.link"] = nil,
+ ["main.item.id"] = si.id,
+ ["target.item.id"] = target.id,
+ } then
+ log:info (si, "Error configuring link")
+ return
+ end
+
+ -- Register
+ si_link:register ()
+
+ -- Activate
+ si_link:activate (Feature.SessionItem.ACTIVE, function (l, e)
+ if e then
+ log:info (si, "Error activating link")
+ l:remove ()
+ else
+ -- Success activating link
+ log:info (si, "Link activated")
+ end
+ end)
+ end
+
+ linkables_om = ObjectManager {
+ Interest { type = "SiLinkable" }
+ }
+
+ links_om = ObjectManager {
+ Interest { type = "Link" }
+ }
+
+ linkables_om:connect("objects-changed", function (om)
+ -- Find the BT microphone linkable
+ local bt_microphone = om:lookup {
+ type = "SiLinkable",
+ Constraint { "node.name", "matches", "bluez_input*"},
+ }
+
+ -- Find the speakers linkable
+ local speakers = om:lookup {
+ type = "SiLinkable",
+ Constraint { "node.name", "matches", "alsa_loopback_device*.alsa_output*Speaker*" },
+ }
+
+ if bt_microphone ~= nil and speakers ~= nil then
+ local link = links_om:lookup {
+ Constraint { "link.output.node", "=", bt_microphone.properties["object.id"] },
+ Constraint { "link.input.node", "=", speakers.properties["object.id"] }
+ }
+ if link == nil then
+ createLink (bt_microphone, speakers)
+ end
+ end
+ end)
+
+ linkables_om:activate()
+ links_om:activate()
--
2.43.0
next prev parent reply other threads:[~2026-09-03 8:57 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-03 8:57 [PATCH BlueZ 1/3] doc/qualification: Add PICS and howto for the BAP qualification Frédéric Danis
2026-09-03 8:57 ` [PATCH BlueZ 2/3] doc/qualification: Add BAP/UCL tests Frédéric Danis
2026-09-03 8:57 ` Frédéric Danis [this message]
2026-09-03 11:53 ` [BlueZ,1/3] doc/qualification: Add PICS and howto for the BAP qualification bluez.test.bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260903085716.741578-3-frederic.danis@collabora.com \
--to=frederic.danis@collabora.com \
--cc=linux-bluetooth@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.