From: Hemanth Selam <hemanth.selam@gmail.com>
To: Andi Shyti <andi.shyti@kernel.org>,
Florian Fainelli <florian.fainelli@broadcom.com>,
Ray Jui <rjui@broadcom.com>,
Scott Branden <sbranden@broadcom.com>,
Broadcom internal kernel review list
<bcm-kernel-feedback-list@broadcom.com>,
Jochen Friedrich <jochen@scram.de>,
Patrice Chotard <patrice.chotard@foss.st.com>
Cc: linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org,
linuxppc-dev@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] i2c: busses: fix typos in comments
Date: Fri, 4 Sep 2026 16:20:07 +0530 [thread overview]
Message-ID: <20260904105010.27405-2-hemanth.selam@gmail.com> (raw)
In-Reply-To: <20260904105010.27405-1-hemanth.selam@gmail.com>
Fix typos in comments, reported by scripts/checkpatch.pl using the
misspelling list in scripts/spelling.txt. Only touches comments, no code
changes.
Assisted-by: Cursor:claude-opus-5
Signed-off-by: Hemanth Selam <hemanth.selam@gmail.com>
---
drivers/i2c/busses/i2c-axxia.c | 2 +-
drivers/i2c/busses/i2c-bcm-kona.c | 2 +-
drivers/i2c/busses/i2c-cpm.c | 2 +-
drivers/i2c/busses/i2c-st.c | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/i2c/busses/i2c-axxia.c b/drivers/i2c/busses/i2c-axxia.c
index 0555eeb6903a..62dc55c146f0 100644
--- a/drivers/i2c/busses/i2c-axxia.c
+++ b/drivers/i2c/busses/i2c-axxia.c
@@ -60,7 +60,7 @@
#define MST_RX_FIFO 0x44
#define MST_INT_ENABLE 0x48
#define MST_INT_STATUS 0x4c
-#define MST_STATUS_RFL (1 << 13) /* RX FIFO serivce */
+#define MST_STATUS_RFL (1 << 13) /* RX FIFO service */
#define MST_STATUS_TFL (1 << 12) /* TX FIFO service */
#define MST_STATUS_SNS (1 << 11) /* Manual mode done */
#define MST_STATUS_SS (1 << 10) /* Automatic mode done */
diff --git a/drivers/i2c/busses/i2c-bcm-kona.c b/drivers/i2c/busses/i2c-bcm-kona.c
index d4f287b31fd7..0c30821e7b0a 100644
--- a/drivers/i2c/busses/i2c-bcm-kona.c
+++ b/drivers/i2c/busses/i2c-bcm-kona.c
@@ -12,7 +12,7 @@
#include <linux/io.h>
#include <linux/slab.h>
-/* Hardware register offsets and field defintions */
+/* Hardware register offsets and field definitions */
#define CS_OFFSET 0x00000020
#define CS_ACK_SHIFT 3
#define CS_ACK_MASK 0x00000008
diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
index 2cb6a233d313..c8b72f14d179 100644
--- a/drivers/i2c/busses/i2c-cpm.c
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -334,7 +334,7 @@ static int cpm_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
tptr++;
}
/* Start transfer now */
- /* Enable RX/TX/Error interupts */
+ /* Enable RX/TX/Error interrupts */
out_8(&i2c_reg->i2cmr, I2CER_TXE | I2CER_TXB | I2CER_RXB);
out_8(&i2c_reg->i2cer, 0xff); /* Clear interrupt status */
/* Chip bug, set enable here */
diff --git a/drivers/i2c/busses/i2c-st.c b/drivers/i2c/busses/i2c-st.c
index 0a2b43b5577b..873ce2f5a406 100644
--- a/drivers/i2c/busses/i2c-st.c
+++ b/drivers/i2c/busses/i2c-st.c
@@ -256,7 +256,7 @@ static void st_i2c_flush_rx_fifo(struct st_i2c_dev *i2c_dev)
static void st_i2c_soft_reset(struct st_i2c_dev *i2c_dev)
{
/*
- * FIFO needs to be emptied before reseting the IP,
+ * FIFO needs to be emptied before resetting the IP,
* else the controller raises a BUSY error.
*/
st_i2c_flush_rx_fifo(i2c_dev);
--
2.48.1
next parent reply other threads:[~2026-09-04 10:50 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20260904105010.27405-1-hemanth.selam@gmail.com>
2026-09-04 10:50 ` Hemanth Selam [this message]
2026-09-04 10:50 ` [PATCH 2/2] i2c: fix repeated word 'to' in comment Hemanth Selam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260904105010.27405-2-hemanth.selam@gmail.com \
--to=hemanth.selam@gmail.com \
--cc=andi.shyti@kernel.org \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=florian.fainelli@broadcom.com \
--cc=jochen@scram.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=patrice.chotard@foss.st.com \
--cc=rjui@broadcom.com \
--cc=sbranden@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.