[PATCH 1/2] i2c: busses: fix typos in comments

[PATCH 1/2] i2c: busses: fix typos in comments

[Hemanth Selam]

Fix typos in comments, reported by scripts/checkpatch.pl using the
misspelling list in scripts/spelling.txt.  Only touches comments, no code
changes.

Assisted-by: Cursor:claude-opus-5
Signed-off-by: Hemanth Selam <hemanth.selam@gmail.com>
---
 drivers/i2c/busses/i2c-axxia.c    | 2 +-
 drivers/i2c/busses/i2c-bcm-kona.c | 2 +-
 drivers/i2c/busses/i2c-cpm.c      | 2 +-
 drivers/i2c/busses/i2c-st.c       | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-axxia.c b/drivers/i2c/busses/i2c-axxia.c
index 0555eeb6903a..62dc55c146f0 100644
--- a/drivers/i2c/busses/i2c-axxia.c
+++ b/drivers/i2c/busses/i2c-axxia.c
@@ -60,7 +60,7 @@
 #define MST_RX_FIFO		0x44
 #define MST_INT_ENABLE		0x48
 #define MST_INT_STATUS		0x4c
-#define   MST_STATUS_RFL	(1 << 13) /* RX FIFO serivce */
+#define   MST_STATUS_RFL	(1 << 13) /* RX FIFO service */
 #define   MST_STATUS_TFL	(1 << 12) /* TX FIFO service */
 #define   MST_STATUS_SNS	(1 << 11) /* Manual mode done */
 #define   MST_STATUS_SS		(1 << 10) /* Automatic mode done */
diff --git a/drivers/i2c/busses/i2c-bcm-kona.c b/drivers/i2c/busses/i2c-bcm-kona.c
index d4f287b31fd7..0c30821e7b0a 100644
--- a/drivers/i2c/busses/i2c-bcm-kona.c
+++ b/drivers/i2c/busses/i2c-bcm-kona.c
@@ -12,7 +12,7 @@
 #include <linux/io.h>
 #include <linux/slab.h>
 
-/* Hardware register offsets and field defintions */
+/* Hardware register offsets and field definitions */
 #define CS_OFFSET				0x00000020
 #define CS_ACK_SHIFT				3
 #define CS_ACK_MASK				0x00000008
diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
index 2cb6a233d313..c8b72f14d179 100644
--- a/drivers/i2c/busses/i2c-cpm.c
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -334,7 +334,7 @@ static int cpm_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 		tptr++;
 	}
 	/* Start transfer now */
-	/* Enable RX/TX/Error interupts */
+	/* Enable RX/TX/Error interrupts */
 	out_8(&i2c_reg->i2cmr, I2CER_TXE | I2CER_TXB | I2CER_RXB);
 	out_8(&i2c_reg->i2cer, 0xff);	/* Clear interrupt status */
 	/* Chip bug, set enable here */
diff --git a/drivers/i2c/busses/i2c-st.c b/drivers/i2c/busses/i2c-st.c
index 0a2b43b5577b..873ce2f5a406 100644
--- a/drivers/i2c/busses/i2c-st.c
+++ b/drivers/i2c/busses/i2c-st.c
@@ -256,7 +256,7 @@ static void st_i2c_flush_rx_fifo(struct st_i2c_dev *i2c_dev)
 static void st_i2c_soft_reset(struct st_i2c_dev *i2c_dev)
 {
 	/*
-	 * FIFO needs to be emptied before reseting the IP,
+	 * FIFO needs to be emptied before resetting the IP,
 	 * else the controller raises a BUSY error.
 	 */
 	st_i2c_flush_rx_fifo(i2c_dev);
-- 
2.48.1

[PATCH 2/2] i2c: fix repeated word 'to' in comment

[Hemanth Selam]

Drop the second 'to', reported by checkpatch.pl as a possible repeated
word.  Only touches a comment, no code changes.

Assisted-by: Cursor:claude-opus-5
Signed-off-by: Hemanth Selam <hemanth.selam@gmail.com>
---
 drivers/i2c/busses/i2c-viperboard.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-viperboard.c b/drivers/i2c/busses/i2c-viperboard.c
index f596efcc291c..859d9aa6fad4 100644
--- a/drivers/i2c/busses/i2c-viperboard.c
+++ b/drivers/i2c/busses/i2c-viperboard.c
@@ -317,7 +317,7 @@ static int vprbrd_i2c_xfer(struct i2c_adapter *i2c, struct i2c_msg *msgs,
 			amsg->addr = pmsg->addr;
 			amsg->unknown1 = 0x00;
 			amsg->len = cpu_to_le16(pmsg->len);
-			/* send the addr, the data goes to to board */
+			/* send the addr, the data goes to board */
 			ret = vprbrd_i2c_addr(vb->usb_dev, amsg);
 			if (ret < 0)
 				error = ret;
-- 
2.48.1