* [PATCH 1/2] scsi: fix typos in comments
[not found] <20260904121449.24178-1-hemanth.selam@gmail.com>
@ 2026-09-04 12:14 ` Hemanth Selam
2026-09-04 12:26 ` sashiko-bot
2026-09-04 12:14 ` [PATCH 2/2] scsi: fix repeated words " Hemanth Selam
1 sibling, 1 reply; 4+ messages in thread
From: Hemanth Selam @ 2026-09-04 12:14 UTC (permalink / raw)
To: Adaptec OEM Raid Solutions, James E.J. Bottomley,
Martin K. Petersen, Juergen E. Fischer, Hannes Reinecke,
Russell King, Ketan Mukadam, Anil Gurumurthy, Sudarsana Kalluru,
Saurav Kashyap, Javed Hasan, GR-QLogic-Storage-Upstream,
Nilesh Javali, Manish Rangankar, Bradley Grove, Satish Kharat,
Sesidhar Baddela, Karan Tilak Kumar, Don Brace, Tyrel Datwyler,
Brian King, Kashyap Desai, Sumit Saxena, Shivasharan S,
Chandrakanth patil, Sathya Prakash, Sreekanth Reddy,
Suganath Prabu Subramani, Ranjan Kumar, YOKOTA Hiroshi, Jack Wang,
Michael Reed, Lee Duncan, Chris Leech, Mike Christie,
Doug Gilbert, Narsimhulu Musini, Matthew Wilcox, Alim Akhtar,
Avri Altman, Bart Van Assche
Cc: linux-kernel, linux-scsi, linux-arm-kernel, storagedev,
target-devel, megaraidlinux.pdl, MPT-FusionLinux.pdl, open-iscsi
Fix typos in comments, reported by scripts/checkpatch.pl using the
misspelling list in scripts/spelling.txt. Only touches comments, no code
changes.
Assisted-by: Cursor:claude-opus-5
Signed-off-by: Hemanth Selam <hemanth.selam@gmail.com>
---
drivers/scsi/aacraid/aachba.c | 2 +-
drivers/scsi/aacraid/aacraid.h | 2 +-
drivers/scsi/aacraid/commsup.c | 2 +-
drivers/scsi/aha152x.c | 6 +++---
drivers/scsi/aic7xxx/aic79xx.h | 8 ++++----
drivers/scsi/aic7xxx/aic79xx_core.c | 4 ++--
drivers/scsi/aic7xxx/aic79xx_osm.c | 2 +-
drivers/scsi/aic7xxx/aic7xxx.h | 6 +++---
drivers/scsi/aic7xxx/aic7xxx_core.c | 2 +-
drivers/scsi/aic7xxx/aicasm/aicasm_macro_scan.l | 2 +-
drivers/scsi/aic7xxx/aiclib.h | 2 +-
drivers/scsi/arm/fas216.c | 8 ++++----
drivers/scsi/arm/fas216.h | 6 +++---
drivers/scsi/atp870u.c | 2 +-
drivers/scsi/be2iscsi/be_cmds.c | 2 +-
drivers/scsi/be2iscsi/be_iscsi.c | 2 +-
drivers/scsi/be2iscsi/be_main.c | 4 ++--
drivers/scsi/be2iscsi/be_main.h | 6 +++---
drivers/scsi/bfa/bfa_core.c | 2 +-
drivers/scsi/bfa/bfa_defs.h | 2 +-
drivers/scsi/bfa/bfa_defs_fcs.h | 2 +-
drivers/scsi/bfa/bfa_defs_svc.h | 2 +-
drivers/scsi/bfa/bfa_fc.h | 6 +++---
drivers/scsi/bfa/bfa_fcpim.c | 6 +++---
drivers/scsi/bfa/bfa_fcpim.h | 2 +-
drivers/scsi/bfa/bfa_fcs_fcpim.c | 2 +-
drivers/scsi/bfa/bfa_fcs_lport.c | 4 ++--
drivers/scsi/bfa/bfa_fcs_rport.c | 4 ++--
drivers/scsi/bfa/bfa_ioc.c | 6 +++---
drivers/scsi/bfa/bfa_ioc.h | 2 +-
drivers/scsi/bfa/bfa_svc.c | 2 +-
drivers/scsi/bfa/bfa_svc.h | 2 +-
drivers/scsi/bfa/bfad.c | 4 ++--
drivers/scsi/bfa/bfad_bsg.c | 2 +-
drivers/scsi/bfa/bfi.h | 4 ++--
drivers/scsi/bfa/bfi_ms.h | 4 ++--
drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 2 +-
drivers/scsi/bnx2fc/bnx2fc_io.c | 2 +-
drivers/scsi/bnx2fc/bnx2fc_tgt.c | 2 +-
drivers/scsi/bnx2i/bnx2i.h | 2 +-
drivers/scsi/bnx2i/bnx2i_sysfs.c | 2 +-
drivers/scsi/csiostor/csio_hw.c | 2 +-
drivers/scsi/csiostor/csio_hw.h | 2 +-
drivers/scsi/csiostor/csio_isr.c | 2 +-
drivers/scsi/csiostor/csio_lnode.c | 4 ++--
drivers/scsi/csiostor/csio_mb.c | 2 +-
drivers/scsi/csiostor/csio_scsi.c | 14 +++++++-------
drivers/scsi/csiostor/csio_wr.c | 8 ++++----
drivers/scsi/esas2r/esas2r.h | 2 +-
drivers/scsi/esas2r/esas2r_init.c | 2 +-
drivers/scsi/fcoe/fcoe_transport.c | 2 +-
drivers/scsi/fnic/fnic_main.c | 2 +-
drivers/scsi/fnic/fnic_trace.h | 2 +-
drivers/scsi/hpsa_cmd.h | 2 +-
drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c | 2 +-
drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.h | 2 +-
drivers/scsi/imm.c | 4 ++--
drivers/scsi/ipr.c | 2 +-
drivers/scsi/libfc/fc_exch.c | 2 +-
drivers/scsi/megaraid.c | 4 ++--
drivers/scsi/megaraid/megaraid_mbox.c | 8 ++++----
drivers/scsi/mpt3sas/mpi/mpi2_init.h | 2 +-
drivers/scsi/mpt3sas/mpt3sas_base.c | 2 +-
drivers/scsi/mpt3sas/mpt3sas_base.h | 4 ++--
drivers/scsi/mpt3sas/mpt3sas_ctl.c | 8 ++++----
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 12 ++++++------
drivers/scsi/mvsas/mv_sas.h | 2 +-
drivers/scsi/ncr53c8xx.c | 4 ++--
drivers/scsi/pcmcia/nsp_cs.c | 2 +-
drivers/scsi/pcmcia/nsp_io.h | 2 +-
drivers/scsi/pm8001/pm8001_sas.h | 2 +-
drivers/scsi/pm8001/pm80xx_hwi.h | 4 ++--
drivers/scsi/pmcraid.c | 4 ++--
drivers/scsi/pmcraid.h | 2 +-
drivers/scsi/ppa.c | 4 ++--
drivers/scsi/qedf/qedf_main.c | 4 ++--
drivers/scsi/qla1280.c | 2 +-
drivers/scsi/qla2xxx/qla_fw.h | 2 +-
drivers/scsi/qla2xxx/qla_iocb.c | 4 ++--
drivers/scsi/qla2xxx/qla_nx.c | 2 +-
drivers/scsi/qla2xxx/qla_os.c | 6 +++---
drivers/scsi/qla2xxx/qla_target.c | 4 ++--
drivers/scsi/qla2xxx/qla_target.h | 4 ++--
drivers/scsi/qla2xxx/tcm_qla2xxx.c | 2 +-
drivers/scsi/qla4xxx/ql4_fw.h | 2 +-
drivers/scsi/qla4xxx/ql4_nx.c | 2 +-
drivers/scsi/qla4xxx/ql4_os.c | 2 +-
drivers/scsi/qlogicfas408.c | 2 +-
drivers/scsi/scsi_error.c | 2 +-
drivers/scsi/scsi_transport_iscsi.c | 2 +-
drivers/scsi/sd_zbc.c | 2 +-
drivers/scsi/sg.c | 2 +-
drivers/scsi/snic/snic_fwint.h | 6 +++---
drivers/scsi/snic/snic_scsi.c | 4 ++--
drivers/scsi/snic/snic_stats.h | 4 ++--
drivers/scsi/st.c | 2 +-
drivers/scsi/sym53c8xx_2/sym53c8xx.h | 2 +-
drivers/scsi/sym53c8xx_2/sym_hipd.c | 8 ++++----
drivers/scsi/wd719x.c | 2 +-
drivers/scsi/wd719x.h | 2 +-
drivers/ufs/core/ufshcd.c | 4 ++--
include/uapi/scsi/scsi_bsg_fc.h | 2 +-
include/ufs/ufs_quirks.h | 2 +-
103 files changed, 172 insertions(+), 172 deletions(-)
diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index df9492247631..4fa440fb5aa8 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -2485,7 +2485,7 @@ static int aac_read(struct scsi_cmnd * scsicmd)
if (aac_adapter_bounds(dev,scsicmd,lba))
return 0;
/*
- * Alocate and initialize a Fib
+ * Allocate and initialize a Fib
*/
cmd_fibcontext = aac_fib_alloc_tag(dev, scsicmd);
aac_priv(scsicmd)->owner = AAC_OWNER_FIRMWARE;
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 0a5888b53d6d..fc9d2b962907 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -701,7 +701,7 @@ struct aac_fibhdr {
__le32 SenderFibAddressHigh;/* upper 32bit of phys. FIB address */
__le32 TimeStamp; /* otherwise timestamp for FW internal use */
} u;
- __le32 Handle; /* FIB handle used for MSGU commnunication */
+ __le32 Handle; /* FIB handle used for MSGU communication */
u32 Previous; /* FW internal use */
u32 Next; /* FW internal use */
};
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index c4485629f792..1597c88f983f 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -404,7 +404,7 @@ static int aac_get_entry (struct aac_dev * dev, u32 qid, struct aac_entry **entr
* @fibptr: Driver fib object to go with fib
* @nonotify: Don't notify the adapter
*
- * Gets the next free QE off the requested priorty adapter command
+ * Gets the next free QE off the requested priority adapter command
* queue and associates the Fib with the QE. The QE represented by
* index is ready to insert on the queue when this routine returns
* success.
diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c
index e3ccb6bb62c0..3c2eb081d1d3 100644
--- a/drivers/scsi/aha152x.c
+++ b/drivers/scsi/aha152x.c
@@ -42,7 +42,7 @@
* - fix for data out w/o scatter gather
*
* Revision 2.0 1999/12/25 15:07:32 fischer
- * - interrupt routine completly reworked
+ * - interrupt routine completely reworked
* - basic support for new eh code
*
* Revision 1.21 1999/11/10 23:46:36 fischer
@@ -1381,7 +1381,7 @@ static irqreturn_t intr(int irqno, void *dev_id)
/*
* busfree phase
- * - handle completition/disconnection/error of current command
+ * - handle completion/disconnection/error of current command
* - start selection for next command (if any)
*/
static void busfree_run(struct Scsi_Host *shpnt)
@@ -1665,7 +1665,7 @@ static void seldi_run(struct Scsi_Host *shpnt)
* reconnecting nexus
* - queue command on DISCONNECTED_SC on DISCONNECT message
* - set completed flag on COMMAND COMPLETE
- * (other completition code moved to busfree_run)
+ * (other completion code moved to busfree_run)
* - handle response to SDTR
* - clear synchronous transfer agreements on BUS RESET
*
diff --git a/drivers/scsi/aic7xxx/aic79xx.h b/drivers/scsi/aic7xxx/aic79xx.h
index 59e9321815c8..ea40806bc5b4 100644
--- a/drivers/scsi/aic7xxx/aic79xx.h
+++ b/drivers/scsi/aic7xxx/aic79xx.h
@@ -275,7 +275,7 @@ typedef enum {
*/
AHD_NONPACKFIFO_BUG = 0x4000,
/*
- * Writing to a DFF SCBPTR register may fail if concurent with
+ * Writing to a DFF SCBPTR register may fail if concurrent with
* a hardware write to the other DFF SCBPTR register. This is
* not currently a concern in our sequencer since all chips with
* this bug have the AHD_NONPACKFIFO_BUG and all writes of concern
@@ -465,7 +465,7 @@ struct hardware_scb {
* each S/G element is expired, its datacnt field is checked to see
* if the LAST_SEG flag is set. If so, SG_LIST_NULL is set in the
* residual sg ptr and the transfer is considered complete. If the
- * sequencer determines that there is a residual in the tranfer, or
+ * sequencer determines that there is a residual in the transfer, or
* there is non-zero status, it will set the SG_STATUS_VALID flag in
* sgptr and dma the scb back into host memory. To sumarize:
*
@@ -837,8 +837,8 @@ struct seeprom_config {
* BIOS Control Bits
*/
uint16_t bios_control; /* word 16 */
-#define CFSUPREM 0x0001 /* support all removeable drives */
-#define CFSUPREMB 0x0002 /* support removeable boot drives */
+#define CFSUPREM 0x0001 /* support all removable drives */
+#define CFSUPREMB 0x0002 /* support removable boot drives */
#define CFBIOSSTATE 0x000C /* BIOS Action State */
#define CFBS_DISABLED 0x00
#define CFBS_ENABLED 0x04
diff --git a/drivers/scsi/aic7xxx/aic79xx_core.c b/drivers/scsi/aic7xxx/aic79xx_core.c
index 3602a1fc40e4..09fd5b1241a1 100644
--- a/drivers/scsi/aic7xxx/aic79xx_core.c
+++ b/drivers/scsi/aic7xxx/aic79xx_core.c
@@ -4235,7 +4235,7 @@ ahd_update_pending_scbs(struct ahd_softc *ahd)
* has already been setup. The negotiation changes may
* effect whether we select-out with ATN. It is only
* safe to clear ENSELO when the bus is not free and no
- * selection is in progres or completed.
+ * selection is in progress or completed.
*/
saved_modes = ahd_save_modes(ahd);
ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
@@ -7152,7 +7152,7 @@ ahd_init(struct ahd_softc *ahd)
goto init_done;
}
- /* Diable current sensing. */
+ /* Disable current sensing. */
ahd_write_flexport(ahd, FLXADDR_ROMSTAT_CURSENSECTL, 0);
#ifdef AHD_DEBUG
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c
index feb1707feb7e..c9470f80626b 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm.c
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.c
@@ -173,7 +173,7 @@ static adapter_tag_info_t aic79xx_tag_info[] =
/*
* The I/O cell on the chip is very configurable in respect to its analog
- * characteristics. Set the defaults here; they can be overriden with
+ * characteristics. Set the defaults here; they can be overridden with
* the proper insmod parameters.
*/
struct ahd_linux_iocell_opts
diff --git a/drivers/scsi/aic7xxx/aic7xxx.h b/drivers/scsi/aic7xxx/aic7xxx.h
index 20857c213c72..5e04c532944c 100644
--- a/drivers/scsi/aic7xxx/aic7xxx.h
+++ b/drivers/scsi/aic7xxx/aic7xxx.h
@@ -432,7 +432,7 @@ struct hardware_scb {
* each S/G element is expired, its datacnt field is checked to see
* if the LAST_SEG flag is set. If so, SG_LIST_NULL is set in the
* residual sg ptr and the transfer is considered complete. If the
- * sequencer determines that there is a residual in the tranfer, it
+ * sequencer determines that there is a residual in the transfer, it
* will set the SG_RESID_VALID flag in sgptr and dma the scb back into
* host memory. To sumarize:
*
@@ -785,8 +785,8 @@ struct seeprom_config {
* BIOS Control Bits
*/
uint16_t bios_control; /* word 16 */
-#define CFSUPREM 0x0001 /* support all removeable drives */
-#define CFSUPREMB 0x0002 /* support removeable boot drives */
+#define CFSUPREM 0x0001 /* support all removable drives */
+#define CFSUPREMB 0x0002 /* support removable boot drives */
#define CFBIOSEN 0x0004 /* BIOS enabled */
#define CFBIOS_BUSSCAN 0x0008 /* Have the BIOS Scan the Bus */
#define CFSM2DRV 0x0010 /* support more than two drives */
diff --git a/drivers/scsi/aic7xxx/aic7xxx_core.c b/drivers/scsi/aic7xxx/aic7xxx_core.c
index b9761f9f0bbc..547a05087c50 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_core.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_core.c
@@ -104,7 +104,7 @@ static const u_int num_phases = ARRAY_SIZE(ahc_phase_table) - 1;
/*
* Valid SCSIRATE values. (p. 3-17)
- * Provides a mapping of tranfer periods in ns to the proper value to
+ * Provides a mapping of transfer periods in ns to the proper value to
* stick in the scsixfer reg.
*/
static const struct ahc_syncrate ahc_syncrates[] =
diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_macro_scan.l b/drivers/scsi/aic7xxx/aicasm/aicasm_macro_scan.l
index 98e9959c6907..52d66ea8dbb1 100644
--- a/drivers/scsi/aic7xxx/aicasm/aicasm_macro_scan.l
+++ b/drivers/scsi/aic7xxx/aicasm/aicasm_macro_scan.l
@@ -1,6 +1,6 @@
%{
/*
- * Sub-Lexical Analyzer for macro invokation in
+ * Sub-Lexical Analyzer for macro invocation in
* the Aic7xxx SCSI Host adapter sequencer assembler.
*
* Copyright (c) 2001 Adaptec Inc.
diff --git a/drivers/scsi/aic7xxx/aiclib.h b/drivers/scsi/aic7xxx/aiclib.h
index ba08eb3c4e3b..f5aa44275070 100644
--- a/drivers/scsi/aic7xxx/aiclib.h
+++ b/drivers/scsi/aic7xxx/aiclib.h
@@ -154,7 +154,7 @@ scsi_4btoul(uint8_t *bytes)
#define IDIROC(x) ((x) | ~ID_ALL_IROC_MASK)
-/* Generate IDs for all 16 possibilites.
+/* Generate IDs for all 16 possibilities.
* The argument has already masked out
* the 4 least significant bits of the device id.
* (e.g., mask: ID_9005_GENERIC_MASK).
diff --git a/drivers/scsi/arm/fas216.c b/drivers/scsi/arm/fas216.c
index fccfacaaf1d5..a4134d25ea3c 100644
--- a/drivers/scsi/arm/fas216.c
+++ b/drivers/scsi/arm/fas216.c
@@ -405,7 +405,7 @@ static void print_debug_list(void)
static void fas216_done(FAS216_Info *info, unsigned int result);
/**
- * fas216_get_last_msg - retrive last message from the list
+ * fas216_get_last_msg - retrieve last message from the list
* @info: interface to search
* @pos: current fifo position
*
@@ -2470,7 +2470,7 @@ int fas216_eh_abort(struct scsi_cmnd *SCpnt)
/**
* fas216_eh_device_reset - Reset the device associated with this command
- * @SCpnt: command specifing device to reset
+ * @SCpnt: command specifying device to reset
*
* Reset the device associated with this command.
* Returns: FAILED if unable to reset.
@@ -2552,7 +2552,7 @@ int fas216_eh_device_reset(struct scsi_cmnd *SCpnt)
/**
* fas216_eh_bus_reset - Reset the bus associated with the command
- * @SCpnt: command specifing bus to reset
+ * @SCpnt: command specifying bus to reset
*
* Reset the bus associated with the command.
* Returns: FAILED if unable to reset.
@@ -2652,7 +2652,7 @@ static void fas216_init_chip(FAS216_Info *info)
/**
* fas216_eh_host_reset - Reset the host associated with this command
- * @SCpnt: command specifing host to reset
+ * @SCpnt: command specifying host to reset
*
* Reset the host associated with this command.
* Returns: FAILED if unable to reset.
diff --git a/drivers/scsi/arm/fas216.h b/drivers/scsi/arm/fas216.h
index 29f710f9cb51..6c6d77ab12cd 100644
--- a/drivers/scsi/arm/fas216.h
+++ b/drivers/scsi/arm/fas216.h
@@ -385,21 +385,21 @@ extern int fas216_eh_abort(struct scsi_cmnd *SCpnt);
/* Function: int fas216_eh_device_reset(struct scsi_cmnd *SCpnt)
* Purpose : Reset the device associated with this command
- * Params : SCpnt - command specifing device to reset
+ * Params : SCpnt - command specifying device to reset
* Returns : FAILED if unable to reset
*/
extern int fas216_eh_device_reset(struct scsi_cmnd *SCpnt);
/* Function: int fas216_eh_bus_reset(struct scsi_cmnd *SCpnt)
* Purpose : Reset the complete bus associated with this command
- * Params : SCpnt - command specifing bus to reset
+ * Params : SCpnt - command specifying bus to reset
* Returns : FAILED if unable to reset
*/
extern int fas216_eh_bus_reset(struct scsi_cmnd *SCpnt);
/* Function: int fas216_eh_host_reset(struct scsi_cmnd *SCpnt)
* Purpose : Reset the host associated with this command
- * Params : SCpnt - command specifing host to reset
+ * Params : SCpnt - command specifying host to reset
* Returns : FAILED if unable to reset
*/
extern int fas216_eh_host_reset(struct scsi_cmnd *SCpnt);
diff --git a/drivers/scsi/atp870u.c b/drivers/scsi/atp870u.c
index 67459d81f479..41c9ef3ec879 100644
--- a/drivers/scsi/atp870u.c
+++ b/drivers/scsi/atp870u.c
@@ -1127,7 +1127,7 @@ static void tscam(struct Scsi_Host *host, bool wide_chip, u8 scam_on)
}
while (1) {
/*
- * The funny division into multiple delays is to accomodate
+ * The funny division into multiple delays is to accommodate
* arches like ARM where udelay() multiplies its argument by
* a large number to initialize a loop counter. To avoid
* overflow, the maximum supported udelay is 2000 microseconds.
diff --git a/drivers/scsi/be2iscsi/be_cmds.c b/drivers/scsi/be2iscsi/be_cmds.c
index 0b59b63bce79..917a3e80b6e6 100644
--- a/drivers/scsi/be2iscsi/be_cmds.c
+++ b/drivers/scsi/be2iscsi/be_cmds.c
@@ -1213,7 +1213,7 @@ int be_cmd_iscsi_post_sgl_pages(struct be_ctrl_info *ctrl,
}
/**
- * be_cmd_set_vlan()- Configure VLAN paramters on the adapter
+ * be_cmd_set_vlan()- Configure VLAN parameters on the adapter
* @phba: device priv structure instance
* @vlan_tag: TAG to be set
*
diff --git a/drivers/scsi/be2iscsi/be_iscsi.c b/drivers/scsi/be2iscsi/be_iscsi.c
index 8d374ae863ba..04ea3d62f0f3 100644
--- a/drivers/scsi/be2iscsi/be_iscsi.c
+++ b/drivers/scsi/be2iscsi/be_iscsi.c
@@ -304,7 +304,7 @@ void beiscsi_iface_destroy_default(struct beiscsi_hba *phba)
/**
* beiscsi_iface_config_vlan()- Set the VLAN TAG
* @shost: Scsi Host for the driver instance
- * @iface_param: Interface paramters
+ * @iface_param: Interface parameters
*
* Set the VLAN TAG for the adapter or disable
* the VLAN config
diff --git a/drivers/scsi/be2iscsi/be_main.c b/drivers/scsi/be2iscsi/be_main.c
index fd18d4d3d219..901579d05304 100644
--- a/drivers/scsi/be2iscsi/be_main.c
+++ b/drivers/scsi/be2iscsi/be_main.c
@@ -570,7 +570,7 @@ static int be_ctrl_init(struct beiscsi_hba *phba, struct pci_dev *pdev)
}
/**
- * beiscsi_get_params()- Set the config paramters
+ * beiscsi_get_params()- Set the config parameters
* @phba: ptr device priv structure
**/
static void beiscsi_get_params(struct beiscsi_hba *phba)
@@ -4188,7 +4188,7 @@ static void beiscsi_cleanup_port(struct beiscsi_hba *phba)
* @beiscsi_conn: ptr to the conn to be cleaned up
* @task: ptr to iscsi_task resource to be freed.
*
- * Free driver mgmt resources binded to CXN.
+ * Free driver mgmt resources bound to CXN.
**/
void
beiscsi_free_mgmt_task_handles(struct beiscsi_conn *beiscsi_conn,
diff --git a/drivers/scsi/be2iscsi/be_main.h b/drivers/scsi/be2iscsi/be_main.h
index 71c95d144560..b6f3e74955a6 100644
--- a/drivers/scsi/be2iscsi/be_main.h
+++ b/drivers/scsi/be2iscsi/be_main.h
@@ -81,7 +81,7 @@
/**
* hardware needs the async PDU buffers to be posted in multiples of 8
- * So have atleast 8 of them by default
+ * So have at least 8 of them by default
*/
#define HWI_GET_ASYNC_PDU_CTX(phwi, ulp_num) \
@@ -236,7 +236,7 @@ struct hwi_wrb_context {
unsigned short free_index;
unsigned short wrb_handles_available;
unsigned short cid;
- uint8_t ulp_num; /* ULP to which CID binded */
+ uint8_t ulp_num; /* ULP to which CID bound */
uint32_t doorbell_offset;
};
@@ -956,7 +956,7 @@ struct be_ring {
u32 cidx; /* consumer index */
u32 pidx; /* producer index -- not used by most rings */
u32 item_size; /* size in bytes of one object */
- u8 ulp_num; /* ULP to which CID binded */
+ u8 ulp_num; /* ULP to which CID bound */
u16 register_set;
u16 doorbell_format;
u32 doorbell_offset;
diff --git a/drivers/scsi/bfa/bfa_core.c b/drivers/scsi/bfa/bfa_core.c
index 2559df8baa05..d8cb3b94df55 100644
--- a/drivers/scsi/bfa/bfa_core.c
+++ b/drivers/scsi/bfa/bfa_core.c
@@ -942,7 +942,7 @@ bfa_msix_lpu_err(struct bfa_s *bfa, int vec)
if (pss_isr) {
/*
* ERR_PSS bit needs to be cleared as well in case
- * interrups are shared so driver's interrupt handler is
+ * interrupts are shared so driver's interrupt handler is
* still called even though it is already masked out.
*/
curr_value = readl(
diff --git a/drivers/scsi/bfa/bfa_defs.h b/drivers/scsi/bfa/bfa_defs.h
index 6abd9f42a3fc..1d5f4f838e54 100644
--- a/drivers/scsi/bfa/bfa_defs.h
+++ b/drivers/scsi/bfa/bfa_defs.h
@@ -707,7 +707,7 @@ struct bfa_boot_bootlun_s {
#pragma pack()
/*
- * BOOT boot configuraton
+ * BOOT boot configuration
*/
struct bfa_boot_cfg_s {
u8 version;
diff --git a/drivers/scsi/bfa/bfa_defs_fcs.h b/drivers/scsi/bfa/bfa_defs_fcs.h
index 760606062c66..aa73a43dffa7 100644
--- a/drivers/scsi/bfa/bfa_defs_fcs.h
+++ b/drivers/scsi/bfa/bfa_defs_fcs.h
@@ -72,7 +72,7 @@ struct bfa_lport_symname_s {
* Roles of FCS port:
* - FCP IM and FCP TM roles cannot be enabled together for a FCS port
* - Create multiple ports if both IM and TM functions required.
- * - Atleast one role must be specified.
+ * - At least one role must be specified.
*/
enum bfa_lport_role {
BFA_LPORT_ROLE_FCP_IM = 0x01, /* FCP initiator role */
diff --git a/drivers/scsi/bfa/bfa_defs_svc.h b/drivers/scsi/bfa/bfa_defs_svc.h
index f2c49f0e5c8b..32ee7af08bf6 100644
--- a/drivers/scsi/bfa/bfa_defs_svc.h
+++ b/drivers/scsi/bfa/bfa_defs_svc.h
@@ -32,7 +32,7 @@ struct bfa_iocfc_intr_attr_s {
};
/*
- * IOC firmware configuraton
+ * IOC firmware configuration
*/
struct bfa_iocfc_fwcfg_s {
u16 num_fabrics; /* number of fabrics */
diff --git a/drivers/scsi/bfa/bfa_fc.h b/drivers/scsi/bfa/bfa_fc.h
index 1091aa428533..0999b8af7fe1 100644
--- a/drivers/scsi/bfa/bfa_fc.h
+++ b/drivers/scsi/bfa/bfa_fc.h
@@ -218,8 +218,8 @@ enum {
FC_ELS_FAN = 0x60, /* Fabric Address Notification */
FC_ELS_RSCN = 0x61, /* Reg State Change Notification */
FC_ELS_SCR = 0x62, /* State Change Registration. */
- FC_ELS_RTIN = 0x77, /* Mangement server request */
- FC_ELS_RNID = 0x78, /* Mangement server request */
+ FC_ELS_RTIN = 0x77, /* Management server request */
+ FC_ELS_RNID = 0x78, /* Management server request */
FC_ELS_RLIR = 0x79, /* Registered Link Incident Record */
FC_ELS_RPSC = 0x7D, /* Report Port Speed Capabilities */
@@ -462,7 +462,7 @@ struct fc_rsi_s {
};
/*
- * structure for PRLI paramater pages, both request & response
+ * structure for PRLI parameter pages, both request & response
* see FC-PH-X table 113 & 115 for explanation also FCP table 8
*/
struct fc_prli_params_s {
diff --git a/drivers/scsi/bfa/bfa_fcpim.c b/drivers/scsi/bfa/bfa_fcpim.c
index 2518e36d70d3..646798c8599b 100644
--- a/drivers/scsi/bfa/bfa_fcpim.c
+++ b/drivers/scsi/bfa/bfa_fcpim.c
@@ -741,7 +741,7 @@ bfa_itnim_sm_cleanup_delete(struct bfa_itnim_s *itnim,
}
/*
- * Rport offline. Fimrware itnim is being deleted - awaiting f/w response.
+ * Rport offline. Firmware itnim is being deleted - awaiting f/w response.
*/
static void
bfa_itnim_sm_fwdelete(struct bfa_itnim_s *itnim, enum bfa_itnim_event event)
@@ -2884,7 +2884,7 @@ bfa_ioim_alloc(struct bfa_s *bfa, struct bfad_ioim_s *dio,
struct bfa_iotag_s *iotag = NULL;
/*
- * alocate IOIM resource
+ * allocate IOIM resource
*/
bfa_q_deq(&fcpim->fcp->iotag_ioim_free_q, &iotag);
if (!iotag) {
@@ -3398,7 +3398,7 @@ bfa_tskim_qresume(void *cbarg)
}
/*
- * Cleanup IOs associated with a task mangement command on IOC failures.
+ * Cleanup IOs associated with a task management command on IOC failures.
*/
static void
bfa_tskim_iocdisable_ios(struct bfa_tskim_s *tskim)
diff --git a/drivers/scsi/bfa/bfa_fcpim.h b/drivers/scsi/bfa/bfa_fcpim.h
index 64e4485b226e..a89b806c68d1 100644
--- a/drivers/scsi/bfa/bfa_fcpim.h
+++ b/drivers/scsi/bfa/bfa_fcpim.h
@@ -405,7 +405,7 @@ void bfa_cb_itnim_tov(void *itnim);
/*
* BFA notification to FCS/driver for second level error recovery.
- * Atleast one I/O request has timedout and target is unresponsive to
+ * At least one I/O request has timedout and target is unresponsive to
* repeated abort requests. Second level error recovery should be initiated
* by starting implicit logout and recovery procedures.
*/
diff --git a/drivers/scsi/bfa/bfa_fcs_fcpim.c b/drivers/scsi/bfa/bfa_fcs_fcpim.c
index 40e65ab28504..136d74c71537 100644
--- a/drivers/scsi/bfa/bfa_fcs_fcpim.c
+++ b/drivers/scsi/bfa/bfa_fcs_fcpim.c
@@ -744,7 +744,7 @@ bfa_cb_itnim_tov(void *cb_arg)
/*
* BFA notification to FCS/driver for second level error recovery.
*
- * Atleast one I/O request has timedout and target is unresponsive to
+ * At least one I/O request has timedout and target is unresponsive to
* repeated abort requests. Second level error recovery should be initiated
* by starting implicit logout and recovery procedures.
*/
diff --git a/drivers/scsi/bfa/bfa_fcs_lport.c b/drivers/scsi/bfa/bfa_fcs_lport.c
index 8c9d423129c0..f40de5e172d9 100644
--- a/drivers/scsi/bfa/bfa_fcs_lport.c
+++ b/drivers/scsi/bfa/bfa_fcs_lport.c
@@ -1882,7 +1882,7 @@ bfa_fcs_lport_fdmi_build_rhba_pyld(struct bfa_fcs_lport_fdmi_s *fdmi, u8 *pyld)
len += sizeof(rhba->hba_attr_blk.attr_count);
/*
- * fill out the invididual entries of the HBA attrib Block
+ * fill out the individual entries of the HBA attrib Block
*/
curr_ptr = (u8 *) &rhba->hba_attr_blk.hba_attr;
@@ -2214,7 +2214,7 @@ bfa_fcs_lport_fdmi_build_portattr_block(struct bfa_fcs_lport_fdmi_s *fdmi,
len = sizeof(port_attrib->attr_count);
/*
- * fill out the invididual entries
+ * fill out the individual entries
*/
curr_ptr = (u8 *) &port_attrib->port_attr;
diff --git a/drivers/scsi/bfa/bfa_fcs_rport.c b/drivers/scsi/bfa/bfa_fcs_rport.c
index d4bde9bbe75b..0cff934e0f36 100644
--- a/drivers/scsi/bfa/bfa_fcs_rport.c
+++ b/drivers/scsi/bfa/bfa_fcs_rport.c
@@ -2231,7 +2231,7 @@ bfa_fcs_rport_process_rpsc(struct bfa_fcs_rport_s *rport,
RPSC_SPEED_CAP_8G;
/*
- * get curent speed from pport attributes from BFA
+ * get current speed from pport attributes from BFA
*/
bfa_fcport_get_attr(port->fcs->bfa, &pport_attr);
@@ -2847,7 +2847,7 @@ bfa_cb_rport_qos_scn_prio(void *cbarg,
}
/*
- * Called to process any unsolicted frames from this remote port
+ * Called to process any unsolicited frames from this remote port
*/
void
bfa_fcs_rport_uf_recv(struct bfa_fcs_rport_s *rport,
diff --git a/drivers/scsi/bfa/bfa_ioc.c b/drivers/scsi/bfa/bfa_ioc.c
index aa68d61a2d0d..ee8379010b87 100644
--- a/drivers/scsi/bfa/bfa_ioc.c
+++ b/drivers/scsi/bfa/bfa_ioc.c
@@ -1527,7 +1527,7 @@ bfa_ioc_fwver_md5_check(struct bfi_ioc_image_hdr_s *fwhdr_1,
}
/*
- * Returns TRUE if major minor and maintainence are same.
+ * Returns TRUE if major minor and maintenance are same.
* If patch versions are same, check for MD5 Checksum to be same.
*/
static bfa_boolean_t
@@ -4157,7 +4157,7 @@ bfa_sfp_speed(struct bfa_sfp_s *sfp, enum bfa_port_speed portspeed,
/*
* FLASH DMA buffer should be big enough to hold both MFG block and
* asic block(64k) at the same time and also should be 2k aligned to
- * avoid write segement to cross sector boundary.
+ * avoid write segment to cross sector boundary.
*/
#define BFA_FLASH_SEG_SZ 2048
#define BFA_FLASH_DMA_BUF_SZ \
@@ -6834,7 +6834,7 @@ bfa_flash_read_start(void __iomem *pci_bar, u32 offset, u32 len,
int status;
/*
- * len must be mutiple of 4 and not exceeding fifo size
+ * len must be multiple of 4 and not exceeding fifo size
*/
if (len == 0 || len > BFA_FLASH_FIFO_SIZE || (len & 0x03) != 0)
return BFA_FLASH_ERR_LEN;
diff --git a/drivers/scsi/bfa/bfa_ioc.h b/drivers/scsi/bfa/bfa_ioc.h
index d70332e9ad6d..6a826b3513a8 100644
--- a/drivers/scsi/bfa/bfa_ioc.h
+++ b/drivers/scsi/bfa/bfa_ioc.h
@@ -844,7 +844,7 @@ void bfa_dconf_modexit(struct bfa_s *bfa);
bfa_status_t bfa_dconf_update(struct bfa_s *bfa);
/*
- * IOC specfic macros
+ * IOC specific macros
*/
#define bfa_ioc_pcifn(__ioc) ((__ioc)->pcidev.pci_func)
#define bfa_ioc_devid(__ioc) ((__ioc)->pcidev.device_id)
diff --git a/drivers/scsi/bfa/bfa_svc.c b/drivers/scsi/bfa/bfa_svc.c
index df33afaaa673..7145672192e6 100644
--- a/drivers/scsi/bfa/bfa_svc.c
+++ b/drivers/scsi/bfa/bfa_svc.c
@@ -5480,7 +5480,7 @@ bfa_uf_start(struct bfa_s *bfa)
}
/*
- * Register handler for all unsolicted receive frames.
+ * Register handler for all unsolicited receive frames.
*
* @param[in] bfa BFA instance
* @param[in] ufrecv receive handler function
diff --git a/drivers/scsi/bfa/bfa_svc.h b/drivers/scsi/bfa/bfa_svc.h
index 99a960a8a2db..22fedecb83c1 100644
--- a/drivers/scsi/bfa/bfa_svc.h
+++ b/drivers/scsi/bfa/bfa_svc.h
@@ -545,7 +545,7 @@ struct bfa_fcport_s {
struct bfa_fcport_ln_s ln; /* Link Notification */
struct bfa_cb_qe_s hcb_qe; /* BFA callback queue elem */
struct bfa_timer_s timer; /* timer */
- u32 msgtag; /* fimrware msg tag for reply */
+ u32 msgtag; /* firmware msg tag for reply */
u8 *stats_kva;
u64 stats_pa;
union bfa_fcport_stats_u *stats;
diff --git a/drivers/scsi/bfa/bfad.c b/drivers/scsi/bfa/bfad.c
index 448f736457f0..8a6c22175c82 100644
--- a/drivers/scsi/bfa/bfad.c
+++ b/drivers/scsi/bfa/bfad.c
@@ -52,7 +52,7 @@ int msix_disable_cb = 0, msix_disable_ct = 0;
int max_xfer_size = BFAD_MAX_SECTORS >> 1;
static int max_rport_logins = BFA_FCS_MAX_RPORT_LOGINS;
-/* Firmware releated */
+/* Firmware related */
u32 bfi_image_cb_size, bfi_image_ct_size, bfi_image_ct2_size;
u32 *bfi_image_cb, *bfi_image_ct, *bfi_image_ct2;
@@ -1019,7 +1019,7 @@ bfad_start_ops(struct bfad_s *bfad) {
}
/*
- * If bfa_linkup_delay is set to -1 default; try to retrive the
+ * If bfa_linkup_delay is set to -1 default; try to retrieve the
* value using the bfad_get_linkup_delay(); else use the
* passed in module param value as the bfa_linkup_delay.
*/
diff --git a/drivers/scsi/bfa/bfad_bsg.c b/drivers/scsi/bfa/bfad_bsg.c
index 292bc9aa43f1..2e045bf91ed3 100644
--- a/drivers/scsi/bfa/bfad_bsg.c
+++ b/drivers/scsi/bfa/bfad_bsg.c
@@ -3383,7 +3383,7 @@ bfad_im_bsg_els_ct_request(struct bsg_job *job)
void *req_kbuf = NULL, *rsp_kbuf = NULL;
int rc = -EINVAL;
- job->reply_len = sizeof(uint32_t); /* Atleast uint32_t reply_len */
+ job->reply_len = sizeof(uint32_t); /* At least uint32_t reply_len */
bsg_reply->reply_payload_rcv_len = 0;
/* Get the payload passed in from userspace */
diff --git a/drivers/scsi/bfa/bfi.h b/drivers/scsi/bfa/bfi.h
index e1e0e967bcc3..552e30255c13 100644
--- a/drivers/scsi/bfa/bfi.h
+++ b/drivers/scsi/bfa/bfi.h
@@ -228,8 +228,8 @@ enum bfi_asic_gen {
};
enum bfi_asic_mode {
- BFI_ASIC_MODE_FC = 1, /* FC upto 8G speed */
- BFI_ASIC_MODE_FC16 = 2, /* FC upto 16G speed */
+ BFI_ASIC_MODE_FC = 1, /* FC up to 8G speed */
+ BFI_ASIC_MODE_FC16 = 2, /* FC up to 16G speed */
BFI_ASIC_MODE_ETH = 3, /* Ethernet ports */
BFI_ASIC_MODE_COMBO = 4, /* FC 16G and Ethernet 10G port */
};
diff --git a/drivers/scsi/bfa/bfi_ms.h b/drivers/scsi/bfa/bfi_ms.h
index b9dc0b9bb814..01411b608b4c 100644
--- a/drivers/scsi/bfa/bfi_ms.h
+++ b/drivers/scsi/bfa/bfi_ms.h
@@ -742,7 +742,7 @@ struct bfi_ioim_req_s {
* loss and other reasons
* - io-tag cannot be used yet.
*
- * BFI_IOIM_STS_DIF_ERR : Firwmare detected DIF error. ex: DIF
+ * BFI_IOIM_STS_DIF_ERR : Firmware detected DIF error. ex: DIF
* CRC err or Ref Tag err or App tag err.
* - io-tag can be reused.
*
@@ -772,7 +772,7 @@ enum bfi_ioim_status {
struct bfi_ioim_rsp_s {
struct bfi_mhdr_s mh; /* common msg header */
__be16 io_tag; /* completed IO tag */
- u16 bfa_rport_hndl; /* releated rport handle */
+ u16 bfa_rport_hndl; /* related rport handle */
u8 io_status; /* IO completion status */
u8 reuse_io_tag; /* IO tag can be reused */
u16 abort_tag; /* host abort request tag */
diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
index c95b084cad69..8eabd87544dc 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
@@ -312,7 +312,7 @@ static int bnx2fc_xmit(struct fc_lport *lport, struct fc_frame *fp)
*/
/*
* tgt_ofld_list access is synchronized using
- * both hba mutex and hba lock. Atleast hba mutex or
+ * both hba mutex and hba lock. At least hba mutex or
* hba lock needs to be held for read access.
*/
diff --git a/drivers/scsi/bnx2fc/bnx2fc_io.c b/drivers/scsi/bnx2fc/bnx2fc_io.c
index 9c7a541a4523..4f3240a2b6e5 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_io.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_io.c
@@ -89,7 +89,7 @@ static void bnx2fc_cmd_timeout(struct work_struct *work)
return;
}
} else {
- /* Hanlde IO timeout */
+ /* Handle IO timeout */
BNX2FC_IO_DBG(io_req, "IO timed out. issue ABTS\n");
if (test_and_set_bit(BNX2FC_FLAG_IO_COMPL,
&io_req->req_flags)) {
diff --git a/drivers/scsi/bnx2fc/bnx2fc_tgt.c b/drivers/scsi/bnx2fc/bnx2fc_tgt.c
index 77dcdfc412b1..b4b71fada591 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_tgt.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_tgt.c
@@ -619,7 +619,7 @@ static u32 bnx2fc_alloc_conn_id(struct bnx2fc_hba *hba,
/*
* tgt_ofld_list access is synchronized using
- * both hba mutex and hba lock. Atleast hba mutex or
+ * both hba mutex and hba lock. At least hba mutex or
* hba lock needs to be held for read access.
*/
diff --git a/drivers/scsi/bnx2i/bnx2i.h b/drivers/scsi/bnx2i/bnx2i.h
index 7030efee5c46..9779b9c3a6c8 100644
--- a/drivers/scsi/bnx2i/bnx2i.h
+++ b/drivers/scsi/bnx2i/bnx2i.h
@@ -573,7 +573,7 @@ struct bnx2i_5771x_dbell {
};
/**
- * struct qp_info - QP (share queue region) atrributes structure
+ * struct qp_info - QP (share queue region) attributes structure
*
* @ctx_base: ioremapped pci register base to access doorbell register
* pertaining to this offloaded connection
diff --git a/drivers/scsi/bnx2i/bnx2i_sysfs.c b/drivers/scsi/bnx2i/bnx2i_sysfs.c
index d6b0bbb5176b..2bbbb4ba1ec3 100644
--- a/drivers/scsi/bnx2i/bnx2i_sysfs.c
+++ b/drivers/scsi/bnx2i/bnx2i_sysfs.c
@@ -33,7 +33,7 @@ static inline struct bnx2i_hba *bnx2i_dev_to_hba(struct device *dev)
* @attr: device attribute (unused)
* @buf: buffer to return current SQ size parameter
*
- * Returns current SQ size parameter, this paramater determines the number
+ * Returns current SQ size parameter, this parameter determines the number
* outstanding iSCSI commands supported on a connection
*/
static ssize_t bnx2i_show_sq_info(struct device *dev,
diff --git a/drivers/scsi/csiostor/csio_hw.c b/drivers/scsi/csiostor/csio_hw.c
index df9f81f29950..8e82703ce724 100644
--- a/drivers/scsi/csiostor/csio_hw.c
+++ b/drivers/scsi/csiostor/csio_hw.c
@@ -480,7 +480,7 @@ csio_hw_flash_wait_op(struct csio_hw *hw, int32_t attempts, int32_t delay)
* Read the specified number of 32-bit words from the serial flash.
* If @byte_oriented is set the read data is stored as a byte array
* (i.e., big-endian), otherwise as 32-bit words in the platform's
- * natural endianess.
+ * natural endianness.
*/
static int
csio_hw_read_flash(struct csio_hw *hw, uint32_t addr, uint32_t nwords,
diff --git a/drivers/scsi/csiostor/csio_hw.h b/drivers/scsi/csiostor/csio_hw.h
index e351af6e7c81..2ed482316b90 100644
--- a/drivers/scsi/csiostor/csio_hw.h
+++ b/drivers/scsi/csiostor/csio_hw.h
@@ -374,7 +374,7 @@ enum csio_hw_ev {
struct csio_hw_stats {
uint32_t n_evt_activeq; /* Number of event in active Q */
uint32_t n_evt_freeq; /* Number of event in free Q */
- uint32_t n_evt_drop; /* Number of event droped */
+ uint32_t n_evt_drop; /* Number of event dropped */
uint32_t n_evt_unexp; /* Number of unexpected events */
uint32_t n_pcich_offline;/* Number of pci channel offline */
uint32_t n_lnlkup_miss; /* Number of lnode lookup miss */
diff --git a/drivers/scsi/csiostor/csio_isr.c b/drivers/scsi/csiostor/csio_isr.c
index b2540402fafc..15170a2de3a6 100644
--- a/drivers/scsi/csiostor/csio_isr.c
+++ b/drivers/scsi/csiostor/csio_isr.c
@@ -174,7 +174,7 @@ csio_process_scsi_cmpl(struct csio_hw *hw, void *wr, uint32_t len,
* We call scsi_done for I/Os that driver thinks aborts
* have timed out. If there is a race caused by FW
* completing abort at the exact same time that the
- * driver has deteced the abort timeout, the following
+ * driver has detected the abort timeout, the following
* check prevents calling of scsi_done twice for the
* same command: once from the eh_abort_handler, another
* from csio_scsi_isr_handler(). This also avoids the
diff --git a/drivers/scsi/csiostor/csio_lnode.c b/drivers/scsi/csiostor/csio_lnode.c
index 78d5ecd14f65..4129fe2ad46d 100644
--- a/drivers/scsi/csiostor/csio_lnode.c
+++ b/drivers/scsi/csiostor/csio_lnode.c
@@ -259,7 +259,7 @@ csio_append_attrib(uint8_t **ptr, uint16_t type, void *val, size_t val_len)
}
/*
- * csio_ln_fdmi_done - FDMI registeration completion
+ * csio_ln_fdmi_done - FDMI registration completion
* @hw: HW context
* @fdmi_req: fdmi request
*/
@@ -1796,7 +1796,7 @@ csio_ln_mgmt_submit_wr(struct csio_mgmtm *mgmtm, struct csio_ioreq *io_req,
* @pld_len - Payload len
*
*
- * This API used submit managment ELS/CT request.
+ * This API used submit management ELS/CT request.
* This called with hw lock held
* Returns: 0 - on success
* -ENOMEM - on error.
diff --git a/drivers/scsi/csiostor/csio_mb.c b/drivers/scsi/csiostor/csio_mb.c
index c7b4c464f6b8..c2aa5fff747c 100644
--- a/drivers/scsi/csiostor/csio_mb.c
+++ b/drivers/scsi/csiostor/csio_mb.c
@@ -334,7 +334,7 @@ csio_mb_caps_config(struct csio_hw *hw, struct csio_mb *mbp, uint32_t tmo,
* @portid: Port ID to get/set info
* @wr: Write/Read PORT information.
* @fc: Flow control
- * @caps: Port capabilites to set.
+ * @caps: Port capabilities to set.
* @cbfn: Callback, if any.
*
*/
diff --git a/drivers/scsi/csiostor/csio_scsi.c b/drivers/scsi/csiostor/csio_scsi.c
index b1de615cf316..86c08f3af3ed 100644
--- a/drivers/scsi/csiostor/csio_scsi.c
+++ b/drivers/scsi/csiostor/csio_scsi.c
@@ -938,12 +938,12 @@ csio_scsis_aborting(struct csio_ioreq *req, enum csio_scsi_ev evt)
* out etc). FW sent back an appropriate IT nexus loss status
* for the abort.
* 4. FW sent an abort, but abort timed out (remote device
- * didnt respond). FW replied back with
+ * didn't respond). FW replied back with
* FW_SCSI_ABORT_TIMEDOUT.
* 5. FW couldn't genuinely abort the request for some reason,
* and sent us an error.
*
- * The first 3 scenarios are treated as succesful abort
+ * The first 3 scenarios are treated as successful abort
* operations by the host, while the last 2 are failed attempts
* to abort. Manipulate the return value of the request
* appropriately, so that host can convey these results
@@ -1063,7 +1063,7 @@ csio_scsis_shost_cmpl_await(struct csio_ioreq *req, enum csio_scsi_ev evt)
* FW event. In this interval, if the I/O times out at the upper
* layer, a close can come in. Take the same action as abort:
* return success, and hope that the remote device unregister
- * path will cleanup this I/O. If the FW still doesnt send
+ * path will cleanup this I/O. If the FW still doesn't send
* the msg, the close times out, and the upper layer resorts
* to the next level of error recovery.
*/
@@ -1095,7 +1095,7 @@ csio_scsis_shost_cmpl_await(struct csio_ioreq *req, enum csio_scsi_ev evt)
* the WR, based on WR opcode. Only on a non-good status is the entire
* WR copied into the WR cache (ioreq->fw_wr).
* The ioreq corresponding to the WR is returned to the caller.
- * NOTE: The SCSI queue doesnt allocate a freelist today, hence
+ * NOTE: The SCSI queue doesn't allocate a freelist today, hence
* no freelist buffer is expected.
*/
struct csio_ioreq *
@@ -1674,7 +1674,7 @@ csio_scsi_err_handler(struct csio_hw *hw, struct csio_ioreq *req)
case FW_RDEV_NOT_READY:
/*
* In firmware, a RDEV can get into this state
- * temporarily, before moving into dissapeared/lost
+ * temporarily, before moving into disappeared/lost
* state. So, the driver should complete the request equivalent
* to device-disappeared!
*/
@@ -1968,7 +1968,7 @@ csio_eh_abort_handler(struct scsi_cmnd *cmnd)
wait_for_completion_timeout(&ioreq->cmplobj, msecs_to_jiffies(tmo));
- /* FW didnt respond to abort within our timeout */
+ /* FW didn't respond to abort within our timeout */
if (((struct scsi_cmnd *)csio_scsi_cmnd(ioreq)) == cmnd) {
csio_err(hw, "Abort timed out -- req: %p\n", ioreq);
@@ -2010,7 +2010,7 @@ csio_eh_abort_handler(struct scsi_cmnd *cmnd)
* @req: IO request.
*
* Cache the result in 'cmnd', since ioreq will be freed soon
- * after we return from here, and the waiting thread shouldnt trust
+ * after we return from here, and the waiting thread shouldn't trust
* the ioreq contents.
*/
static void
diff --git a/drivers/scsi/csiostor/csio_wr.c b/drivers/scsi/csiostor/csio_wr.c
index aa6007a21868..a45a368dbe4b 100644
--- a/drivers/scsi/csiostor/csio_wr.c
+++ b/drivers/scsi/csiostor/csio_wr.c
@@ -80,8 +80,8 @@ static inline void
csio_wr_ring_fldb(struct csio_hw *hw, struct csio_q *flq)
{
/*
- * Ring the doorbell only when we have atleast CSIO_QCREDIT_SZ
- * number of bytes in the freelist queue. This translates to atleast
+ * Ring the doorbell only when we have at least CSIO_QCREDIT_SZ
+ * number of bytes in the freelist queue. This translates to at least
* 8 freelist buffer pointers (since each pointer is 8 bytes).
*/
if (flq->inc_idx >= 8) {
@@ -296,7 +296,7 @@ csio_wr_alloc_q(struct csio_hw *hw, uint32_t qsize, uint32_t wrsize,
return -1;
/*
- * Make sure in a FLQ, atleast 1 credit (8 FL buffers)
+ * Make sure in a FLQ, at least 1 credit (8 FL buffers)
* remains unpopulated,otherwise HW thinks
* FLQ is empty.
*/
@@ -1235,7 +1235,7 @@ csio_wr_process_iq(struct csio_hw *hw, struct csio_q *q,
if (flq) {
uint32_t avail = csio_wr_avail_qcredits(flq);
if (avail <= 16) {
- /* Make sure in FLQ, atleast 1 credit (8 FL buffers)
+ /* Make sure in FLQ, at least 1 credit (8 FL buffers)
* remains unpopulated otherwise HW thinks
* FLQ is empty.
*/
diff --git a/drivers/scsi/esas2r/esas2r.h b/drivers/scsi/esas2r/esas2r.h
index a763edd05fe4..d8e9053905ff 100644
--- a/drivers/scsi/esas2r/esas2r.h
+++ b/drivers/scsi/esas2r/esas2r.h
@@ -88,7 +88,7 @@ extern int sg_tablesize;
extern int interrupt_mode;
extern int num_io_requests;
-/* Macro defintions */
+/* Macro definitions */
#define ESAS2R_MAX_ID 255
#define MAX_ADAPTERS 32
#define ESAS2R_DRVR_NAME "esas2r"
diff --git a/drivers/scsi/esas2r/esas2r_init.c b/drivers/scsi/esas2r/esas2r_init.c
index 0a35f1953768..06ee2c2d024e 100644
--- a/drivers/scsi/esas2r/esas2r_init.c
+++ b/drivers/scsi/esas2r/esas2r_init.c
@@ -672,7 +672,7 @@ static int __maybe_unused esas2r_resume(struct device *dev)
goto error_exit;
}
- /* Set up interupt mode */
+ /* Set up interrupt mode */
esas2r_setup_interrupts(a, a->intr_mode);
/*
diff --git a/drivers/scsi/fcoe/fcoe_transport.c b/drivers/scsi/fcoe/fcoe_transport.c
index 2bbb9a38e61d..a8704ea7cae5 100644
--- a/drivers/scsi/fcoe/fcoe_transport.c
+++ b/drivers/scsi/fcoe/fcoe_transport.c
@@ -302,7 +302,7 @@ EXPORT_SYMBOL_GPL(fcoe_get_wwn);
/**
* fcoe_fc_crc() - Calculates the CRC for a given frame
- * @fp: The frame to be checksumed
+ * @fp: The frame to be checksummed
*
* This uses crc32() routine to calculate the CRC for a frame
*
diff --git a/drivers/scsi/fnic/fnic_main.c b/drivers/scsi/fnic/fnic_main.c
index 9b3025007075..83cddf799ee8 100644
--- a/drivers/scsi/fnic/fnic_main.c
+++ b/drivers/scsi/fnic/fnic_main.c
@@ -502,7 +502,7 @@ static int fnic_dev_wait(struct vnic_dev *vdev,
* Sometime schedule_timeout_uninterruptible take long time
* to wake up so we do not retry as we are only waiting for
* 2 seconds in while loop. By adding count, we make sure
- * we try atleast three times before returning -ETIMEDOUT
+ * we try at least three times before returning -ETIMEDOUT
*/
time = jiffies + (HZ * 2);
do {
diff --git a/drivers/scsi/fnic/fnic_trace.h b/drivers/scsi/fnic/fnic_trace.h
index d1c301bf3fde..f160d627475a 100644
--- a/drivers/scsi/fnic/fnic_trace.h
+++ b/drivers/scsi/fnic/fnic_trace.h
@@ -100,7 +100,7 @@ void fnic_debugfs_terminate(void);
void fnic_trace_debugfs_init(void);
void fnic_trace_debugfs_terminate(void);
-/* Fnic FC CTLR Trace releated function */
+/* Fnic FC CTLR Trace related function */
int fnic_fc_trace_init(void);
void fnic_fc_trace_free(void);
int fnic_fc_trace_set_data(u32 host_no, u8 frame_type,
diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h
index ba6a3aa8d954..2ba199ad8707 100644
--- a/drivers/scsi/hpsa_cmd.h
+++ b/drivers/scsi/hpsa_cmd.h
@@ -25,7 +25,7 @@
#include <linux/build_bug.h> /* static_assert */
#include <linux/stddef.h> /* offsetof */
-/* general boundary defintions */
+/* general boundary definitions */
#define SENSEINFOBYTES 32 /* may vary between hbas */
#define SG_ENTRIES_IN_CMD 32 /* Max SG entries excluding chain blocks */
#define HPSA_SG_CHAIN 0x80000000
diff --git a/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c b/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c
index 61f682800765..ecef1157093f 100644
--- a/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c
+++ b/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c
@@ -1198,7 +1198,7 @@ static void ibmvscsis_poll_cmd_q(struct scsi_info *vscsi)
rc = ibmvscsis_trans_event(vscsi, crq);
} else if (vscsi->flags & TRANS_EVENT) {
/*
- * if a tranport event has occurred leave
+ * if a transport event has occurred leave
* everything but transport events on the queue
*/
dev_dbg(&vscsi->dev, "poll_cmd_q, ignoring\n");
diff --git a/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.h b/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.h
index 7ae074e5d7a1..48ee8f33fa8e 100644
--- a/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.h
+++ b/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.h
@@ -194,7 +194,7 @@ struct scsi_info {
struct list_head list;
char eye[MAX_EYE];
- /* commands waiting for space on repsonse queue */
+ /* commands waiting for space on response queue */
struct list_head waiting_rsp;
#define NO_QUEUE 0x00
#define WAIT_ENABLED 0X01
diff --git a/drivers/scsi/imm.c b/drivers/scsi/imm.c
index 0535252e77e3..b0fa538a4698 100644
--- a/drivers/scsi/imm.c
+++ b/drivers/scsi/imm.c
@@ -652,7 +652,7 @@ static int imm_completion(struct scsi_cmnd *const cmd)
(v == READ_10) || (v == WRITE_6) || (v == WRITE_10));
/*
- * We only get here if the drive is ready to comunicate,
+ * We only get here if the drive is ready to communicate,
* hence no need for a full imm_wait.
*/
w_ctr(ppb, 0x0c);
@@ -714,7 +714,7 @@ static int imm_completion(struct scsi_cmnd *const cmd)
scsi_pointer->this_residual++;
}
}
- /* Now check to see if the drive is ready to comunicate */
+ /* Now check to see if the drive is ready to communicate */
w_ctr(ppb, 0x0c);
r = (r_str(ppb) & 0xb8);
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index d207e5e81afe..abe6cb773c6d 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -8247,7 +8247,7 @@ static int ipr_reset_cancel_hcam_done(struct ipr_cmnd *ipr_cmd)
* ipr_reset_cancel_hcam - Cancel outstanding HCAMs
* @ipr_cmd: ipr command struct
*
- * Description: Cancel any oustanding HCAMs to the IOA.
+ * Description: Cancel any outstanding HCAMs to the IOA.
*
* Return value:
* IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c
index 9183a0e9568a..bf993908d7c9 100644
--- a/drivers/scsi/libfc/fc_exch.c
+++ b/drivers/scsi/libfc/fc_exch.c
@@ -198,7 +198,7 @@ static void fc_exch_els_rrq(struct fc_frame *);
*
* To protect against concurrency between a worker thread code and timers,
* sequence allocation and deallocation must be locked.
- * - exchange refcnt can be done atomicly without locks.
+ * - exchange refcnt can be done atomically without locks.
* - sequence allocation must be locked by exch lock.
* - If the EM pool lock and ex_lock must be taken at the same time, then the
* EM pool lock must be taken before the ex_lock.
diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
index 9476a0d2c72d..4833e3043e61 100644
--- a/drivers/scsi/megaraid.c
+++ b/drivers/scsi/megaraid.c
@@ -1009,7 +1009,7 @@ mega_prepare_passthru(adapter_t *adapter, scb_t *scb, struct scsi_cmnd *cmd,
* @channel: actual channel on the controller
* @target: actual id on the controller.
*
- * prepare a command for the scsi physical devices. This rountine prepares
+ * prepare a command for the scsi physical devices. This routine prepares
* commands for devices which can take extended CDBs (>10 bytes)
*/
static mega_ext_passthru *
@@ -2986,7 +2986,7 @@ megadev_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
* mega_m_to_n() copies the data from the user space, so we do not
* have to do it here.
* NOTE: We will need some user address to copyout the data, therefore
- * the inteface layer will also provide us with the required user
+ * the interface layer will also provide us with the required user
* addresses.
*/
memset(&uioc, 0, sizeof(nitioctl_t));
diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
index ce89032a5a74..2fb4c17f3974 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -401,7 +401,7 @@ megaraid_exit(void)
* @id : pci device id of the class of controllers
*
* This routine should be called whenever a new adapter is detected by the
- * PCI hotplug susbsystem.
+ * PCI hotplug subsystem.
*/
static int
megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
@@ -1164,7 +1164,7 @@ megaraid_mbox_setup_dma_pools(adapter_t *adapter)
}
/*
- * Allocate memory for each embedded passthru strucuture pointer
+ * Allocate memory for each embedded passthru structure pointer
* Request for a 128 bytes aligned structure for each passthru command
* structure
* Since passthru and extended passthru commands are exclusive, they
@@ -3299,7 +3299,7 @@ megaraid_mbox_fire_sync_cmd(adapter_t *adapter)
* @adapter : controller's soft state
* @scb : SCB to be displayed
*
- * Diplay information about the given SCB iff the current debug level is
+ * Display information about the given SCB iff the current debug level is
* verbose.
*/
static void
@@ -3723,7 +3723,7 @@ megaraid_mbox_mm_done(adapter_t *adapter, scb_t *scb)
/**
* gather_hbainfo - HBA characteristics for the applications
* @adapter : HBA soft state
- * @hinfo : pointer to the caller's host info strucuture
+ * @hinfo : pointer to the caller's host info structure
*/
static int
gather_hbainfo(adapter_t *adapter, mraid_hba_info_t *hinfo)
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_init.h b/drivers/scsi/mpt3sas/mpi/mpi2_init.h
index 8f1b903fe0a9..964e1248acd7 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_init.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_init.h
@@ -27,7 +27,7 @@
* 05-21-08 02.00.05 Fixed typo in name of Mpi2SepRequest_t.
* 10-02-08 02.00.06 Removed Untagged and No Disconnect values from SCSI IO
* Control field Task Attribute flags.
- * Moved LUN field defines to mpi2.h becasue they are
+ * Moved LUN field defines to mpi2.h because they are
* common to many structures.
* 05-06-09 02.00.07 Changed task management type of Query Unit Attention to
* Query Asynchronous Event.
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index fed7aeffec58..fd6d79e3afd5 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -1951,7 +1951,7 @@ _base_irqpoll(struct irq_poll *irqpoll, int budget)
}
/**
- * _base_init_irqpolls - initliaze IRQ polls
+ * _base_init_irqpolls - initialize IRQ polls
* @ioc: per adapter object
*
* Return: nothing
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
index 47255bf9cdda..458a716b7f7d 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
@@ -1296,14 +1296,14 @@ typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc);
* @sense_dma_pool:
* @reply_depth: hba reply queue depth:
* @reply_sz: per reply frame size:
- * @reply: pool of replys:
+ * @reply: pool of replies:
* @reply_dma:
* @reply_dma_pool:
* @reply_free_queue_depth: reply free depth
* @reply_free: pool for reply free queue (32 bit addr)
* @reply_free_dma:
* @reply_free_dma_pool:
- * @reply_free_host_index: tail index in pool to insert free replys
+ * @reply_free_host_index: tail index in pool to insert free replies
* @reply_post_queue_depth: reply post queue depth
* @reply_post_struct: struct for reply_post_free physical & virt address
* @rdpq_array_capable: FW supports multiple reply queue addresses in ioc_init
diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
index 8bb947004885..5a35ef56fc72 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
@@ -3324,7 +3324,7 @@ static DEVICE_ATTR_RO(board_tracer);
* @attr: ?
* @buf: the buffer returned
*
- * This is for firmware implemention for deboucing device
+ * This is for firmware implementation for deboucing device
* removal events.
*
* A sysfs 'read-only' shost attribute.
@@ -3346,7 +3346,7 @@ static DEVICE_ATTR_RO(io_delay);
* @attr: ?
* @buf: the buffer returned
*
- * This is for firmware implemention for deboucing device
+ * This is for firmware implementation for deboucing device
* removal events.
*
* A sysfs 'read-only' shost attribute.
@@ -3830,7 +3830,7 @@ host_trace_buffer_enable_store(struct device *cdev,
}
static DEVICE_ATTR_RW(host_trace_buffer_enable);
-/*********** diagnostic trigger suppport *********************************/
+/*********** diagnostic trigger support *********************************/
/**
* diag_trigger_master_show - show the diag_trigger_master attribute
@@ -4129,7 +4129,7 @@ diag_trigger_mpi_store(struct device *cdev,
static DEVICE_ATTR_RW(diag_trigger_mpi);
-/*********** diagnostic trigger suppport *** END ****************************/
+/*********** diagnostic trigger support *** END ****************************/
/*****************************************/
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 0e12009a87f6..aa2667e58ca3 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -4380,7 +4380,7 @@ _scsih_block_io_to_pcie_children_attached_directly(struct MPT3SAS_ADAPTER *ioc,
* using high priority request queue. It will send a sas iounit
* control request (MPI2_SAS_OP_REMOVE_DEVICE) from this completion.
*
- * This is designed to send muliple task management request at the same
+ * This is designed to send multiple task management request at the same
* time to the fifo. If the fifo is full, we will append the request,
* and process it in a future completion.
*/
@@ -4684,7 +4684,7 @@ _scsih_sas_control_complete(struct MPT3SAS_ADAPTER *ioc, u16 smid,
* @handle: device handle
* Context: interrupt time.
*
- * This is designed to send muliple task management request at the same
+ * This is designed to send multiple task management request at the same
* time to the fifo. If the fifo is full, we will append the request,
* and process it in a future completion.
*/
@@ -4919,7 +4919,7 @@ mpt3sas_check_for_pending_internal_cmds(struct MPT3SAS_ADAPTER *ioc, u16 smid)
* @smid: system request message index
*
* This will check delayed target reset list, and feed the
- * next reqeust.
+ * next request.
*
* Return: 1 meaning mf should be freed from _base_interrupt
* 0 means the mf is freed from this function.
@@ -13028,7 +13028,7 @@ _scsih_probe_devices(struct MPT3SAS_ADAPTER *ioc)
* @shost: SCSI host pointer
*
* The shost has the ability to discover targets on its own instead
- * of scanning the entire bus. In our implemention, we will kick off
+ * of scanning the entire bus. In our implementation, we will kick off
* firmware discovery.
*/
static void
@@ -13076,7 +13076,7 @@ static void _scsih_complete_devices_scanning(struct MPT3SAS_ADAPTER *ioc)
* @time: elapsed time of the scan in jiffies
*
* This function will be called periodicallyn until it returns 1 with the
- * scsi_host and the elapsed time of the scan in jiffies. In our implemention,
+ * scsi_host and the elapsed time of the scan in jiffies. In our implementation,
* we wait for firmware discovery to complete, then return 1.
*/
static int
@@ -14039,7 +14039,7 @@ scsih_init(void)
mpt3sas_base_initialize_callback_handler();
- /* queuecommand callback hander */
+ /* queuecommand callback handler */
scsi_io_cb_idx = mpt3sas_base_register_callback_handler(_scsih_io_done);
/* task management callback handler */
diff --git a/drivers/scsi/mvsas/mv_sas.h b/drivers/scsi/mvsas/mv_sas.h
index 7521f969aa87..ab67511646e8 100644
--- a/drivers/scsi/mvsas/mv_sas.h
+++ b/drivers/scsi/mvsas/mv_sas.h
@@ -236,7 +236,7 @@ struct mvs_device {
u16 reserved;
};
-/* Generate PHY tunning parameters */
+/* Generate PHY tuning parameters */
struct phy_tuning {
/* 1 bit, transmitter emphasis enable */
u8 trans_emp_en:1;
diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c
index 5369ca3fe4fd..cb821e0cc19f 100644
--- a/drivers/scsi/ncr53c8xx.c
+++ b/drivers/scsi/ncr53c8xx.c
@@ -2220,7 +2220,7 @@ static struct script script0 __initdata = {
}/*-------------------------< NO_DATA >--------------------*/,{
/*
- ** The target wants to tranfer too much data
+ ** The target wants to transfer too much data
** or in the wrong direction.
** Remember that in extended error.
*/
@@ -7055,7 +7055,7 @@ static struct ccb *ncr_get_ccb(struct ncb *np, struct scsi_cmnd *cmd)
}
/*
- ** Remember all informations needed to free this CCB.
+ ** Remember all information needed to free this CCB.
*/
cp->tag = tag;
cp->target = tn;
diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c
index ae70fda96ae9..1e64d4168cfb 100644
--- a/drivers/scsi/pcmcia/nsp_cs.c
+++ b/drivers/scsi/pcmcia/nsp_cs.c
@@ -683,7 +683,7 @@ static void nsp_reselected(struct scsi_cmnd *SCpnt)
}
/*
- * count how many data transferd
+ * count how many data transferred
*/
static int nsp_fifo_count(struct scsi_cmnd *SCpnt)
{
diff --git a/drivers/scsi/pcmcia/nsp_io.h b/drivers/scsi/pcmcia/nsp_io.h
index 3b8746f85b6c..f10d39fc6611 100644
--- a/drivers/scsi/pcmcia/nsp_io.h
+++ b/drivers/scsi/pcmcia/nsp_io.h
@@ -1,5 +1,5 @@
/*
- NinjaSCSI I/O funtions
+ NinjaSCSI I/O functions
By: YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
This software may be used and distributed according to the terms of
diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
index b63b6ffcaaf5..5464e3d1e8d8 100644
--- a/drivers/scsi/pm8001/pm8001_sas.h
+++ b/drivers/scsi/pm8001/pm8001_sas.h
@@ -314,7 +314,7 @@ struct mpi_mem {
struct mpi_mem_req {
/* The number of element in the mpiMemory array */
u32 count;
- /* The array of structures that define memroy regions*/
+ /* The array of structures that define memory regions*/
struct mpi_mem region[USI_MAX_MEMCNT];
};
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.h b/drivers/scsi/pm8001/pm80xx_hwi.h
index d8a63b7fed6a..7aebc780972e 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.h
+++ b/drivers/scsi/pm8001/pm80xx_hwi.h
@@ -964,7 +964,7 @@ struct dek_mgmt_req {
/**
* brief the data structure for SET PHY PROFILE COMMAND
- * use to retrive phy specific information
+ * use to retrieve phy specific information
*/
struct set_phy_profile_req {
__le32 tag;
@@ -974,7 +974,7 @@ struct set_phy_profile_req {
/**
* brief the data structure for GET PHY PROFILE COMMAND
- * use to retrive phy specific information
+ * use to retrieve phy specific information
*/
struct get_phy_profile_req {
__le32 tag;
diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c
index 942a99393204..2e28d7711d2f 100644
--- a/drivers/scsi/pmcraid.c
+++ b/drivers/scsi/pmcraid.c
@@ -860,7 +860,7 @@ static void _pmcraid_fire_command(struct pmcraid_cmd *cmd)
unsigned long lock_flags;
/* Add this command block to pending cmd pool. We do this prior to
- * writting IOARCB to ioarrin because IOA might complete the command
+ * writing IOARCB to ioarrin because IOA might complete the command
* by the time we are about to add it to the list. Response handler
* (isr/tasklet) looks for cmd block in the pending pending list.
*/
@@ -2453,7 +2453,7 @@ static void pmcraid_request_sense(struct pmcraid_cmd *cmd)
/* request sense might be called as part of error response processing
* which runs in tasklets context. It is possible that mid-layer might
- * schedule queuecommand during this time, hence, writting to IOARRIN
+ * schedule queuecommand during this time, hence, writing to IOARRIN
* must be protect by host_lock
*/
pmcraid_send_cmd(cmd, pmcraid_erp_done,
diff --git a/drivers/scsi/pmcraid.h b/drivers/scsi/pmcraid.h
index cd059b7599b4..a74d87fea537 100644
--- a/drivers/scsi/pmcraid.h
+++ b/drivers/scsi/pmcraid.h
@@ -211,7 +211,7 @@ struct pmcraid_ioadl_desc {
/* additional IOARCB data which can be CDB or additional request parameters
* or list of IOADLs. Firmware supports max of 512 bytes for IOARCB, hence then
- * number of IOADLs are limted to 27. In case they are more than 27, they will
+ * number of IOADLs are limited to 27. In case they are more than 27, they will
* be used in chained form
*/
struct pmcraid_ioarcb_add_data {
diff --git a/drivers/scsi/ppa.c b/drivers/scsi/ppa.c
index 8a4e910d5758..3303f9fcc673 100644
--- a/drivers/scsi/ppa.c
+++ b/drivers/scsi/ppa.c
@@ -556,7 +556,7 @@ static int ppa_completion(struct scsi_cmnd *const cmd)
(v == READ_10) || (v == WRITE_6) || (v == WRITE_10));
/*
- * We only get here if the drive is ready to comunicate,
+ * We only get here if the drive is ready to communicate,
* hence no need for a full ppa_wait.
*/
r = (r_str(ppb) & 0xf0);
@@ -624,7 +624,7 @@ static int ppa_completion(struct scsi_cmnd *const cmd)
sg_virt(scsi_pointer->buffer);
}
}
- /* Now check to see if the drive is ready to comunicate */
+ /* Now check to see if the drive is ready to communicate */
r = (r_str(ppb) & 0xf0);
/* If not, drop back down to the scheduler and wait a timer tick */
if (!(r & 0x80))
diff --git a/drivers/scsi/qedf/qedf_main.c b/drivers/scsi/qedf/qedf_main.c
index da429b3a4283..9a05f52b62db 100644
--- a/drivers/scsi/qedf/qedf_main.c
+++ b/drivers/scsi/qedf/qedf_main.c
@@ -187,7 +187,7 @@ static void qedf_handle_link_update(struct work_struct *work)
}
/*
- * If we get here then we never received a repsonse to our
+ * If we get here then we never received a response to our
* fip vlan request so set the vlan_id to the default and
* tell FCoE that the link is up
*/
@@ -838,7 +838,7 @@ static int qedf_eh_abort(struct scsi_cmnd *sc_cmd)
io_req->event == QEDF_IOREQ_EV_ABORT_FAILED ||
io_req->event == QEDF_IOREQ_EV_CLEANUP_SUCCESS) {
/*
- * If we get a reponse to the abort this is success from
+ * If we get a response to the abort this is success from
* the perspective that all references to the command have
* been removed from the driver and firmware
*/
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index cdd6fe002c32..034df7060957 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -4238,7 +4238,7 @@ qla1280_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
goto error_release_region;
}
- /* load the F/W, read paramaters, and init the H/W */
+ /* load the F/W, read parameters, and init the H/W */
if (qla1280_initialize_adapter(ha)) {
printk(KERN_INFO "qla1x160: Failed to initialize adapter\n");
goto error_free_irq;
diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h
index 98bc4a57b59b..6c2f23c80895 100644
--- a/drivers/scsi/qla2xxx/qla_fw.h
+++ b/drivers/scsi/qla2xxx/qla_fw.h
@@ -1319,7 +1319,7 @@ struct device_reg_24xx {
__le32 unused_6[2]; /* Gap. */
__le32 iobase_sdata;
};
-/* RISC-RISC semaphore register PCI offet */
+/* RISC-RISC semaphore register PCI offset */
#define RISC_REGISTER_BASE_OFFSET 0x7010
#define RISC_REGISTER_WINDOW_OFFSET 0x6
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index 88bae1166a24..62e85531a3ce 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -4425,7 +4425,7 @@ qla25xx_build_bidir_iocb(srb_t *sp, struct scsi_qla_host *vha,
/* Allocate additional continuation packets */
if (avail_dsds == 0) {
- /* Continuation type 1 IOCB can accomodate
+ /* Continuation type 1 IOCB can accommodate
* 5 DSDS
*/
cont_pkt = qla2x00_prep_cont_type1_iocb(vha,
@@ -4448,7 +4448,7 @@ qla25xx_build_bidir_iocb(srb_t *sp, struct scsi_qla_host *vha,
/* Allocate additional continuation packets */
if (avail_dsds == 0) {
- /* Continuation type 1 IOCB can accomodate
+ /* Continuation type 1 IOCB can accommodate
* 5 DSDS
*/
cont_pkt = qla2x00_prep_cont_type1_iocb(vha,
diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index 2366cca51bce..dff03308bcc6 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -3513,7 +3513,7 @@ int qla82xx_fcoe_ctx_reset(scsi_qla_host_t *vha)
*
* Return:
* Success (fcoe_ctx reset is done) : 0
- * Failed (fcoe_ctx reset not completed within max loop timout ) : 1
+ * Failed (fcoe_ctx reset not completed within max loop timeout ) : 1
*/
int qla2x00_wait_for_fcoe_ctx_reset(scsi_qla_host_t *vha)
{
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index c0efdbff5da7..9221ce104f75 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -6202,7 +6202,7 @@ qla25xx_rdp_rsp_reduce_size(struct scsi_qla_host *vha, void *pkt)
vha->hw->isp_ops->fw_version_str(vha, fwstr, sizeof(fwstr));
fwstr[strcspn(fwstr, " ")] = 0;
- /* if FW version allows RDP response length upto 2048 bytes: */
+ /* if FW version allows RDP response length up to 2048 bytes: */
if (strcmp(fwstr, "8.09.00") > 0 || strcmp(fwstr, "8.05.65") == 0)
return false;
@@ -6442,7 +6442,7 @@ void qla24xx_process_purex_rdp(struct scsi_qla_host *vha,
vha->fabric_port_name,
sizeof(rsp_payload->port_name_direct_desc.WWPN));
- /* Bufer Credit Descriptor */
+ /* Buffer Credit Descriptor */
rsp_payload->buffer_credit_desc.desc_tag = cpu_to_be32(0x10006);
rsp_payload->buffer_credit_desc.desc_len =
cpu_to_be32(RDP_DESC_LEN(rsp_payload->buffer_credit_desc));
@@ -8494,7 +8494,7 @@ qla2x00_module_init(void)
goto destroy_cache;
} else if (ret > 0) {
/*
- * If initiator mode is explictly disabled by qlt_init(),
+ * If initiator mode is explicitly disabled by qlt_init(),
* prevent scsi_transport_fc.c:fc_scsi_scan_rport() from
* performing scsi_scan_target() during LOOP UP event.
*/
diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index 53a505df8da0..1cd377191122 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -1953,7 +1953,7 @@ static void qlt_24xx_retry_term_exchange(struct scsi_qla_host *vha,
}
/* drop cmds for the given lun
- * XXX only looks for cmds on the port through which lun reset was recieved
+ * XXX only looks for cmds on the port through which lun reset was received
* XXX does not go through the list of other port (which may have cmds
* for the same lun)
*/
@@ -3328,7 +3328,7 @@ int qlt_xmit_response(struct qla_tgt_cmd *cmd, int xmit_type,
CTIO7_FLAGS_DONT_RET_CTIO);
/* qlt_24xx_init_ctio_to_isp will correct
- * all neccessary fields that's part of CTIO7.
+ * all necessary fields that's part of CTIO7.
* There should be no residual of CTIO-CRC2 data.
*/
qlt_24xx_init_ctio_to_isp((struct ctio7_to_24xx *)ctio,
diff --git a/drivers/scsi/qla2xxx/qla_target.h b/drivers/scsi/qla2xxx/qla_target.h
index 61072fb41b29..905f629159fc 100644
--- a/drivers/scsi/qla2xxx/qla_target.h
+++ b/drivers/scsi/qla2xxx/qla_target.h
@@ -559,7 +559,7 @@ struct ctio_crc_from_fw {
* ISP queue - ABTS received/response entries structure definition for 24xx.
*/
#define ABTS_RECV_24XX 0x54 /* ABTS received (for 24xx) */
-#define ABTS_RESP_24XX 0x55 /* ABTS responce (for 24xx) */
+#define ABTS_RESP_24XX 0x55 /* ABTS response (for 24xx) */
/*
* ISP queue - ABTS received IOCB entry structure definition for 24xx.
@@ -814,7 +814,7 @@ struct qla_tgt {
int tgt_stop; /* the target mode driver is being stopped */
int tgt_stopped; /* the target mode driver has been stopped */
- /* Count of sessions refering qla_tgt. Protected by hardware_lock. */
+ /* Count of sessions referring qla_tgt. Protected by hardware_lock. */
int sess_count;
spinlock_t sess_work_lock;
diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c b/drivers/scsi/qla2xxx/tcm_qla2xxx.c
index 3be23ed067e6..fb26cd1b6383 100644
--- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c
+++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c
@@ -1439,7 +1439,7 @@ static int tcm_qla2xxx_check_initiator_node_acl(
return -EINVAL;
}
/*
- * Format the FCP Initiator port_name into colon seperated values to
+ * Format the FCP Initiator port_name into colon separated values to
* match the format by tcm_qla2xxx explict ConfigFS NodeACLs.
*/
memset(&port_name, 0, 36);
diff --git a/drivers/scsi/qla4xxx/ql4_fw.h b/drivers/scsi/qla4xxx/ql4_fw.h
index 860ec61b51b9..b446354fbeb4 100644
--- a/drivers/scsi/qla4xxx/ql4_fw.h
+++ b/drivers/scsi/qla4xxx/ql4_fw.h
@@ -260,7 +260,7 @@ union external_hw_config_reg {
struct {
/* FIXME: Do we even need this? All values are
* referred to by 16 bit quantities. Platform and
- * endianess issues. */
+ * endianness issues. */
__le32 bReserved0:1;
__le32 bSDRAMProtectionMethod:2;
__le32 bSDRAMBanks:1;
diff --git a/drivers/scsi/qla4xxx/ql4_nx.c b/drivers/scsi/qla4xxx/ql4_nx.c
index f7340cfc990a..29a56e0dbdc7 100644
--- a/drivers/scsi/qla4xxx/ql4_nx.c
+++ b/drivers/scsi/qla4xxx/ql4_nx.c
@@ -3954,7 +3954,7 @@ qla4_8xxx_get_flash_info(struct scsi_qla_host *ha)
* Remarks:
* For iSCSI, throws away all I/O and AENs into bit bucket, so they will
* not be available after successful return. Driver must cleanup potential
- * outstanding I/O's after calling this funcion.
+ * outstanding I/O's after calling this function.
**/
int
qla4_8xxx_stop_firmware(struct scsi_qla_host *ha)
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index c9d9fc7c81fb..b20d74dcd2f7 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -7216,7 +7216,7 @@ static int qla4xxx_sysfs_ddb_is_non_persistent(struct device *dev,
* @user: if set then this call is made from userland else from kernel
*
* Returns:
- * On sucess: QLA_SUCCESS
+ * On success: QLA_SUCCESS
* On failure: QLA_ERROR
*
* This create separate sysfs entries for session and connection attributes of
diff --git a/drivers/scsi/qlogicfas408.c b/drivers/scsi/qlogicfas408.c
index d36293bc2717..e0a136e15322 100644
--- a/drivers/scsi/qlogicfas408.c
+++ b/drivers/scsi/qlogicfas408.c
@@ -94,7 +94,7 @@ static void ql_zap(struct qlogicfas408_priv *priv)
}
/*
- * Do a pseudo-dma tranfer
+ * Do a pseudo-dma transfer
*/
static int ql_pdma(struct qlogicfas408_priv *priv, int phase, char *request,
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index b729407348f7..368dc68ec092 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -1489,7 +1489,7 @@ static int scsi_eh_tur(struct scsi_cmnd *scmd)
* @done_q: queue for commands which are finished
* @try_stu: boolean on if a STU command should be tried in addition to TUR.
*
- * Decription:
+ * Description:
* Tests if devices are in a working state. Commands to devices now in
* a working state are sent to the done_q while commands to devices which
* are still failing to respond are returned to the work_q for more
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index 8aa76f813bcd..6221a1ada76d 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -1838,7 +1838,7 @@ static void iscsi_scan_session(struct work_struct *work)
}
/**
- * iscsi_block_scsi_eh - block scsi eh until session state has transistioned
+ * iscsi_block_scsi_eh - block scsi eh until session state has transitioned
* @cmd: scsi cmd passed to scsi eh handler
*
* If the session is down this function will wait for the recovery
diff --git a/drivers/scsi/sd_zbc.c b/drivers/scsi/sd_zbc.c
index 56e455fb5add..fc50a8275b06 100644
--- a/drivers/scsi/sd_zbc.c
+++ b/drivers/scsi/sd_zbc.c
@@ -154,7 +154,7 @@ static int sd_zbc_do_report_zones(struct scsi_disk *sdkp, unsigned char *buf,
*
* Try to allocate a reply buffer for the number of requested zones.
* The size of the buffer allocated may be smaller than requested to
- * satify the device constraint (max_hw_sectors, max_segments, etc).
+ * satisfy the device constraint (max_hw_sectors, max_segments, etc).
*
* Return the address of the allocated buffer and update @buflen with
* the size of the allocated buffer.
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 5408f002e6c0..66be4f1a0316 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -964,7 +964,7 @@ sg_ioctl_common(struct file *filp, Sg_device *sdp, Sg_fd *sfp,
case SG_SET_FORCE_LOW_DMA:
/*
* N.B. This ioctl never worked properly, but failed to
- * return an error value. So returning '0' to keep compability
+ * return an error value. So returning '0' to keep compatibility
* with legacy applications.
*/
return 0;
diff --git a/drivers/scsi/snic/snic_fwint.h b/drivers/scsi/snic/snic_fwint.h
index 2550ba964b03..d7c9aaeca84e 100644
--- a/drivers/scsi/snic/snic_fwint.h
+++ b/drivers/scsi/snic/snic_fwint.h
@@ -95,7 +95,7 @@ struct snic_io_hdr {
u16 resvd;
};
-/* auxillary funciton for encoding the snic_io_hdr */
+/* auxiliary function for encoding the snic_io_hdr */
static inline void
snic_io_hdr_enc(struct snic_io_hdr *hdr, u8 typ, u8 status, u32 id, u32 hid,
u16 sg_cnt, ulong ctx)
@@ -110,7 +110,7 @@ snic_io_hdr_enc(struct snic_io_hdr *hdr, u8 typ, u8 status, u32 id, u32 hid,
hdr->flags = 0;
}
-/* auxillary funciton for decoding the snic_io_hdr */
+/* auxiliary function for decoding the snic_io_hdr */
static inline void
snic_io_hdr_dec(struct snic_io_hdr *hdr, u8 *typ, u8 *stat, u32 *cmnd_id,
u32 *hid, ulong *ctx)
@@ -473,7 +473,7 @@ struct snic_fw_req {
}; /* end of snic_fw_req structure */
/*
- * Auxillary macro to verify specific snic req/cmpl structures
+ * Auxiliary macro to verify specific snic req/cmpl structures
* to ensure that it will be aligned to 64 bit, and not using
* color bit field
*/
diff --git a/drivers/scsi/snic/snic_scsi.c b/drivers/scsi/snic/snic_scsi.c
index c6af3b8d2523..fbf2124362a0 100644
--- a/drivers/scsi/snic/snic_scsi.c
+++ b/drivers/scsi/snic/snic_scsi.c
@@ -1508,7 +1508,7 @@ snic_send_abort_and_wait(struct snic *snic, struct scsi_cmnd *sc)
* If the command is already completed by fw_cmpl code,
* we just return SUCCESS from here. This means that the abort
* succeeded. In the SCSI ML, since the timeout for command has
- * happend, the completion wont actually complete the command
+ * happened, the completion wont actually complete the command
* and it will be considered as an aborted command
*
* The CMD_SP will not be cleared except while holding io_lock
@@ -2066,7 +2066,7 @@ snic_send_dr_and_wait(struct snic *snic, struct scsi_cmnd *sc)
}
/*
- * auxillary funciton to check lun reset op is supported or not
+ * auxiliary function to check lun reset op is supported or not
* Not supported if returns 0
*/
static int
diff --git a/drivers/scsi/snic/snic_stats.h b/drivers/scsi/snic/snic_stats.h
index f0285c5a35f8..481bb21cfef7 100644
--- a/drivers/scsi/snic/snic_stats.h
+++ b/drivers/scsi/snic/snic_stats.h
@@ -88,7 +88,7 @@ struct snic_stats {
void snic_stats_debugfs_init(struct snic *);
void snic_stats_debugfs_remove(struct snic *);
-/* Auxillary function to update active IO counter */
+/* Auxiliary function to update active IO counter */
static inline void
snic_stats_update_active_ios(struct snic_stats *s_stats)
{
@@ -102,7 +102,7 @@ snic_stats_update_active_ios(struct snic_stats *s_stats)
atomic64_inc(&io->num_ios);
}
-/* Auxillary function to update IO completion counter */
+/* Auxiliary function to update IO completion counter */
static inline void
snic_stats_update_io_cmpl(struct snic_stats *s_stats)
{
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index f1c3c4946637..734057138f28 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -5020,7 +5020,7 @@ static int sgl_map_user_pages(struct st_buffer *STbp,
goto out_unmap;
for (i=0; i < nr_pages; i++) {
- /* FIXME: flush superflous for rw==READ,
+ /* FIXME: flush superfluous for rw==READ,
* probably wrong function for rw==WRITE
*/
flush_dcache_page(pages[i]);
diff --git a/drivers/scsi/sym53c8xx_2/sym53c8xx.h b/drivers/scsi/sym53c8xx_2/sym53c8xx.h
index 11f5dc29aa59..8790f1315f75 100644
--- a/drivers/scsi/sym53c8xx_2/sym53c8xx.h
+++ b/drivers/scsi/sym53c8xx_2/sym53c8xx.h
@@ -128,7 +128,7 @@ struct sym_driver_setup {
/*
* Initial setup.
*
- * Can be overriden at startup by a command line.
+ * Can be overridden at startup by a command line.
*/
#define SYM_LINUX_DRIVER_SETUP { \
.max_tag = CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS, \
diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c
index c554e4158094..d5ca66afab34 100644
--- a/drivers/scsi/sym53c8xx_2/sym_hipd.c
+++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c
@@ -606,7 +606,7 @@ static inline void sym_init_burst(struct sym_hcb *np, u_char bc)
* Save initial settings of some IO registers.
* Assumed to have been set by BIOS.
* We cannot reset the chip prior to reading the
- * IO registers, since informations will be lost.
+ * IO registers, since information will be lost.
* Since the SCRIPTS processor may be running, this
* is not safe on paper, but it seems to work quite
* well. :)
@@ -2178,7 +2178,7 @@ static void sym_recover_scsi_int (struct sym_hcb *np, u_char hsts)
/*
* If we haven't been interrupted inside the SCRIPTS
- * critical pathes, we can safely restart the SCRIPTS
+ * critical paths, we can safely restart the SCRIPTS
* and trust the DSA value if it matches a CCB.
*/
if ((!(dsp > SCRIPTA_BA(np, getjob_begin) &&
@@ -4516,7 +4516,7 @@ static void sym_int_sir(struct sym_hcb *np)
}
goto out;
/*
- * The device wants us to tranfer more data than
+ * The device wants us to transfer more data than
* expected or in the wrong direction.
* The number of extra bytes is in scratcha.
* It is a data overrun condition.
@@ -4913,7 +4913,7 @@ static struct sym_ccb *sym_alloc_ccb(struct sym_hcb *np)
sym_insque_head(&cp->link_ccbq, &np->free_ccbq);
/*
- * Chain into optionnal lists.
+ * Chain into optional lists.
*/
#ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
sym_insque_head(&cp->link2_ccbq, &np->dummy_ccbq);
diff --git a/drivers/scsi/wd719x.c b/drivers/scsi/wd719x.c
index 830d40f57f6a..3b64114123f5 100644
--- a/drivers/scsi/wd719x.c
+++ b/drivers/scsi/wd719x.c
@@ -399,7 +399,7 @@ static int wd719x_chip_init(struct wd719x *wd)
/* disable interrupts during initialization of RISC */
wd719x_writeb(wd, WD719X_AMR_CMD_PARAM, WD719X_DISABLE_INT);
- /* issue INITIALIZE RISC comand */
+ /* issue INITIALIZE RISC command */
wd719x_writeb(wd, WD719X_AMR_COMMAND, WD719X_CMD_INIT_RISC);
/* enable advanced mode (wake up RISC) */
wd719x_writeb(wd, WD719X_PCI_MODE_SELECT, WD719X_ENABLE_ADVANCE_MODE);
diff --git a/drivers/scsi/wd719x.h b/drivers/scsi/wd719x.h
index 966ab0fb4621..6523bc46b4ea 100644
--- a/drivers/scsi/wd719x.h
+++ b/drivers/scsi/wd719x.h
@@ -130,7 +130,7 @@ struct wd719x {
#define WD719X_SUE_REJECTED 0x01 /* Command Rejected (bad opcode/param) */
#define WD719X_SUE_SCBQFULL 0x02 /* SCB queue full */
/* 0x03 is reserved */
-#define WD719X_SUE_TERM 0x04 /* Host terminated SCB via primative cmd */
+#define WD719X_SUE_TERM 0x04 /* Host terminated SCB via primitive cmd */
#define WD719X_SUE_CHAN1PAR 0x05 /* PCI Channel 1 parity error occurred */
#define WD719X_SUE_CHAN1ABORT 0x06 /* PCI Channel 1 system abort occurred */
#define WD719X_SUE_CHAN23PAR 0x07 /* PCI Channel 2/3 parity error occurred */
diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index 2ba244cf40ac..8381c99bb763 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -10103,7 +10103,7 @@ static int ufshcd_set_dev_pwr_mode(struct ufs_hba *hba,
/*
* Current function would be generally called from the power management
* callbacks hence set the RQF_PM flag so that it doesn't resume the
- * already suspended childs.
+ * already suspended children.
*/
ret = ufshcd_execute_start_stop(sdp, pwr_mode, &sshdr);
if (ret) {
@@ -10188,7 +10188,7 @@ static void ufshcd_vreg_set_lpm(struct ufs_hba *hba)
/*
* It seems some UFS devices may keep drawing more than sleep current
- * (atleast for 500us) from UFS rails (especially from VCCQ rail).
+ * (at least for 500us) from UFS rails (especially from VCCQ rail).
* To avoid this situation, add 2ms delay before putting these UFS
* rails in LPM mode.
*/
diff --git a/include/uapi/scsi/scsi_bsg_fc.h b/include/uapi/scsi/scsi_bsg_fc.h
index 5e46cf1054af..4f5f98529df1 100644
--- a/include/uapi/scsi/scsi_bsg_fc.h
+++ b/include/uapi/scsi/scsi_bsg_fc.h
@@ -293,7 +293,7 @@ struct fc_bsg_reply {
*/
__u32 result;
- /* If there was reply_payload, how much was recevied ? */
+ /* If there was reply_payload, how much was received ? */
__u32 reply_payload_rcv_len;
union {
diff --git a/include/ufs/ufs_quirks.h b/include/ufs/ufs_quirks.h
index e9c59ec1ceae..b1f339d4b076 100644
--- a/include/ufs/ufs_quirks.h
+++ b/include/ufs/ufs_quirks.h
@@ -65,7 +65,7 @@ struct ufs_dev_quirk {
/*
* It seems some UFS devices may keep drawing more than sleep current
- * (atleast for 500us) from UFS rails (especially from VCCQ rail).
+ * (at least for 500us) from UFS rails (especially from VCCQ rail).
* To avoid this situation, add 2ms delay before putting these UFS
* rails in LPM mode.
*/
--
2.48.1
^ permalink raw reply related [flat|nested] 4+ messages in thread