[PATCH] mtd: fix typos in comments

[Hemanth Selam <hemanth.selam@gmail.com>]

Fix typos in comments, reported by scripts/checkpatch.pl using the
misspelling list in scripts/spelling.txt.  Only touches comments, no code
changes.

Assisted-by: Cursor:claude-opus-5
Signed-off-by: Hemanth Selam <hemanth.selam@gmail.com>
---
 drivers/mtd/devices/docg3.c                | 4 ++--
 drivers/mtd/nand/onenand/onenand_base.c    | 2 +-
 drivers/mtd/nand/raw/fsmc_nand.c           | 2 +-
 drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 2 +-
 drivers/mtd/nand/raw/mtk_nand.c            | 2 +-
 drivers/mtd/nand/raw/nand_base.c           | 2 +-
 drivers/mtd/nand/raw/nand_legacy.c         | 4 ++--
 drivers/mtd/spi-nor/otp.c                  | 2 +-
 include/linux/mtd/bbm.h                    | 2 +-
 include/linux/mtd/rawnand.h                | 2 +-
 include/linux/mtd/sh_flctl.h               | 4 ++--
 11 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c
index 603fd0efc2ea..84566997d665 100644
--- a/drivers/mtd/devices/docg3.c
+++ b/drivers/mtd/devices/docg3.c
@@ -1884,7 +1884,7 @@ static void doc_release_device(struct mtd_info *mtd)
 
 /**
  * docg3_resume - Awakens docg3 floor
- * @pdev: platfrom device
+ * @pdev: platform device
  *
  * Returns 0 (always successful)
  */
@@ -1963,7 +1963,7 @@ static int docg3_suspend(struct platform_device *pdev, pm_message_t state)
  * @pdev: platform device
  *
  * Probes for a G3 chip at the specified IO space in the platform data
- * ressources. The floor 0 must be available.
+ * resources. The floor 0 must be available.
  *
  * Returns 0 on success, -ENOMEM, -ENXIO on error
  */
diff --git a/drivers/mtd/nand/onenand/onenand_base.c b/drivers/mtd/nand/onenand/onenand_base.c
index d08aeac86f9f..bca5a3bebd41 100644
--- a/drivers/mtd/nand/onenand/onenand_base.c
+++ b/drivers/mtd/nand/onenand/onenand_base.c
@@ -3279,7 +3279,7 @@ static void onenand_check_features(struct mtd_info *mtd)
 			 *
 			 * Now it has as following
 			 * KFM4G16Q4M has NOP 4 with version ID 0x0131
-			 * KFM4G16Q5M has NOP 1 with versoin ID 0x013e
+			 * KFM4G16Q5M has NOP 1 with version ID 0x013e
 			 */
 			if ((this->version_id & 0xf) == 0xe)
 				this->options |= ONENAND_HAS_NOP_1;
diff --git a/drivers/mtd/nand/raw/fsmc_nand.c b/drivers/mtd/nand/raw/fsmc_nand.c
index b13b2b0c3f30..08ef4425559c 100644
--- a/drivers/mtd/nand/raw/fsmc_nand.c
+++ b/drivers/mtd/nand/raw/fsmc_nand.c
@@ -461,7 +461,7 @@ static int fsmc_correct_ecc1(struct nand_chip *chip,
 				      chip->ecc.size, sm_order);
 }
 
-/* Count the number of 0's in buff upto a max of max_bits */
+/* Count the number of 0's in buff up to a max of max_bits */
 static int count_written_bits(u8 *buff, int size, int max_bits)
 {
 	int k, written_bits = 0;
diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
index 527165ccc839..c61f3983a713 100644
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
@@ -2271,7 +2271,7 @@ static int nand_boot_init(struct gpmi_nand_data  *this)
 {
 	nand_boot_set_geometry(this);
 
-	/* This is ROM arch-specific initilization before the BBT scanning. */
+	/* This is ROM arch-specific initialization before the BBT scanning. */
 	if (GPMI_IS_MX23(this))
 		return mx23_boot_init(this);
 	return 0;
diff --git a/drivers/mtd/nand/raw/mtk_nand.c b/drivers/mtd/nand/raw/mtk_nand.c
index 21c7e1102746..c439b7814ebb 100644
--- a/drivers/mtd/nand/raw/mtk_nand.c
+++ b/drivers/mtd/nand/raw/mtk_nand.c
@@ -42,7 +42,7 @@
 #define		CON_BRD			BIT(8)  /* burst  read */
 #define		CON_BWR			BIT(9)	/* burst  write */
 #define		CON_SEC_SHIFT		(12)
-/* Timming control register */
+/* Timing control register */
 #define NFI_ACCCON		(0x0C)
 #define NFI_INTR_EN		(0x10)
 #define		INTR_AHB_DONE_EN	BIT(6)
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index a5b278ab9384..a225b10f8145 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -6205,7 +6205,7 @@ static int nand_scan_tail(struct nand_chip *chip)
 	/*
 	 * FIXME: some NAND manufacturer drivers expect the first die to be
 	 * selected when manufacturer->init() is called. They should be fixed
-	 * to explictly select the relevant die when interacting with the NAND
+	 * to explicitly select the relevant die when interacting with the NAND
 	 * chip.
 	 */
 	nand_select_target(chip, 0);
diff --git a/drivers/mtd/nand/raw/nand_legacy.c b/drivers/mtd/nand/raw/nand_legacy.c
index 97700f80d5b8..94d5c7723c5a 100644
--- a/drivers/mtd/nand/raw/nand_legacy.c
+++ b/drivers/mtd/nand/raw/nand_legacy.c
@@ -319,7 +319,7 @@ static void nand_command(struct nand_chip *chip, unsigned int command,
 				      NAND_CTRL_CLE | NAND_CTRL_CHANGE);
 		chip->legacy.cmd_ctrl(chip, NAND_CMD_NONE,
 				      NAND_NCE | NAND_CTRL_CHANGE);
-		/* EZ-NAND can take upto 250ms as per ONFi v4.0 */
+		/* EZ-NAND can take up to 250ms as per ONFi v4.0 */
 		nand_wait_status_ready(chip, 250);
 		return;
 
@@ -459,7 +459,7 @@ static void nand_command_lp(struct nand_chip *chip, unsigned int command,
 				      NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
 		chip->legacy.cmd_ctrl(chip, NAND_CMD_NONE,
 				      NAND_NCE | NAND_CTRL_CHANGE);
-		/* EZ-NAND can take upto 250ms as per ONFi v4.0 */
+		/* EZ-NAND can take up to 250ms as per ONFi v4.0 */
 		nand_wait_status_ready(chip, 250);
 		return;
 
diff --git a/drivers/mtd/spi-nor/otp.c b/drivers/mtd/spi-nor/otp.c
index 7d0b145d78d8..61c55227e15d 100644
--- a/drivers/mtd/spi-nor/otp.c
+++ b/drivers/mtd/spi-nor/otp.c
@@ -25,7 +25,7 @@
  * Read a security register by using the SPINOR_OP_RSECR commands.
  *
  * In Winbond/GigaDevice datasheets the term "security register" stands for
- * an one-time-programmable memory area, consisting of multiple bytes (usually
+ * a one-time-programmable memory area, consisting of multiple bytes (usually
  * 256). Thus one "security register" maps to one OTP region.
  *
  * This method is used on GigaDevice and Winbond flashes.
diff --git a/include/linux/mtd/bbm.h b/include/linux/mtd/bbm.h
index d890805f5494..67929fdf2dff 100644
--- a/include/linux/mtd/bbm.h
+++ b/include/linux/mtd/bbm.h
@@ -75,7 +75,7 @@ struct nand_bbt_descr {
  * with NAND_BBT_CREATE.
  */
 #define NAND_BBT_CREATE_EMPTY	0x00000400
-/* Write bbt if neccecary */
+/* Write bbt if necessary */
 #define NAND_BBT_WRITE		0x00002000
 /* Read and write back block contents when writing bbt */
 #define NAND_BBT_SAVECONTENT	0x00004000
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index 5c70e7bd3ed5..43fefff02025 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -1592,7 +1592,7 @@ void nand_wait_ready(struct nand_chip *chip);
 
 /*
  * Free resources held by the NAND device, must be called on error after a
- * sucessful nand_scan().
+ * successful nand_scan().
  */
 void nand_cleanup(struct nand_chip *chip);
 
diff --git a/include/linux/mtd/sh_flctl.h b/include/linux/mtd/sh_flctl.h
index 78fc2d4218c8..15adf2474fa0 100644
--- a/include/linux/mtd/sh_flctl.h
+++ b/include/linux/mtd/sh_flctl.h
@@ -60,8 +60,8 @@
  * Some hardware uses bits called PULSEx instead of FCKSEL_E and QTSEL_E
  * to control the clock divider used between the High-Speed Peripheral Clock
  * and the FLCTL internal clock. If so, use CLK_8_BIT_xxx for connecting 8 bit
- * and CLK_16_BIT_xxx for connecting 16 bit bus bandwith NAND chips. For the 16
- * bit version the divider is seperate for the pulse width of high and low
+ * and CLK_16_BIT_xxx for connecting 16 bit bus bandwidth NAND chips. For the 16
+ * bit version the divider is separate for the pulse width of high and low
  * signals.
  */
 #define PULSE3	(0x1 << 27)
-- 
2.48.1